Capture Excise Invoice w.r.t Stock Transfer Order

Hi all,
Can anyone explain me how to Capture Excise Invoice W.r.t Stock Transfer Orders.
right Now i'm follwing below Steps
1. Create STO in Issuing (sending ) plant with duty and CVD conditions.
2. Issue Material to Receiving PLant using 351 Movement.
3. Book the CVD Condition thru MIRO Transaction
4. Capturing Excise Invoice w.r.t Stock Transfer Order.
5. Receive the material in Plant( 101 Mvmt).
I had Few Query at step 3 and 4.
Q1. While capturing Excise Invoice w.rt STO system is not taking CVD number as reference in Commercial Invoice Field.
Q2. It gave me the Msg Like Excise Invoice XXX does not Exist in PLant B2B ( B2B is my sending Plant).
does that mean i have to first create the excise invoice in sending plant?
if yes, how can i create pls provide step for this.
this excise invoice need to be created in reference to STO or In refernce to 351 mvmt document.
Regards,
Sheo Anand Singh

Hi Anand,
Commercial Invoice number is the invoice number u have created in your Step-3, not the CVD number.
Hope this clarifies.
Thanks,
Viswanath

Similar Messages

Capture Excise Invoice w.r .t Without Purchase order

HI
When i try to post J1IEX i.e Capture Excise Invoice w.r .t Without Purchase order i am getting the following error message :
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount '            1.000-' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application
Please help me to solve this issue
Thanks & Regards,
Mani

Hi,
check in cin-basic settings- co code settings , there will be a check box "Rounding duty on procurement" , pls tick mark this and check it..
otherwise check in debit / credit selection for EWPO trans type . as per blw in - Logistics General  Tax on Goods Movements  India  Account Determination  Specify Excise Accounts per Excise Transaction
EWPO           Credit     CENVAT clearing account
EWPO           Debit     RG 23 AED account
EWPO           Debit     RG 23 BED account
EWPO           Debit     RG 23 ECS Account
EWPO           Debit     RG 23 NCCD account
EWPO           Debit     RG 23 SED account and ECS and SE CESS
Edited by: Jayakumar Raju A.S on Aug 19, 2009 6:36 PM

Proforma invoice not created for stock transfer order

Hi Experts
while creating a proforma invoice for stock transfer order between the plants we are not able to create proforma invoice , the process is replenishment delivery is created and Wm is also done and the billing with reference to delivery and the item category is relevant for billing with value J, and below is the message i get whilw creating invoice
     Technical data
         Tech. data details
          Client
          Group Number
          Sales Document Number
          Item Number of the SD Document         000010
          Schedule Line Number                   0001
          Counter in Control Tables              00
          Message Identification                 00
          System Message Number                  001
          Output Type                            E
          Message Variable 01
          Message Variable 02
          Message Variable 03
          Message Variable 04
          Group Type                             F
No biliing documents generated
Please suggest.
Thanks

This explanation is not in detail and hence I am not clear about your configuration settings.
First go to IMG Logistics-General => Tax on Goods Movements => India => Business Transactions => Outgoing Excise Invoices => Assign Billing Types to Delivery Types.
There ensure that you have assigned the billing type JEX (assuming that you are using the standard) to your delivery type NL.
Perhaps, you can also try with "D" for your item category in Billing Relevance field but I am not sure this will solve your issue. Try in development client.
thanks
G. Lakshmipathi

Capturing Excise details for CENVAT in Stock Transfer

Dear Gurus,
Our requirement is that we have 2 manufacturing plants and first plant sends a semi finished product duly paying all Excise duties, to the second plant and they receive it to manufacture a finished product and sell it from there.
Both the plant are under the same company code.
First plant raises a Stock Trasfer Delivery doc with Excise Invoice and sends the goods to the second plant. Second plant captures the Excise duties through J1IEX_C, so these duties can be availed for CENVAT credit.
I have created Plant 2 as a customer and Plant 1 as a Vendor. Also maintained 'Shipping data for Plants' for both the Plants. I am not able to do J1IEX_C, as the system is saying Maintain Vendor for the Customer 'ABC' attached to Supplying Plant 'ABC'.
Kindly let me know what have i to do to successfully create STO and allow the second plant to capture the excise duties for CENVAT credit purposes.
Thanks and regards.
Venkat - Hyd.

Thanks Ravi or Raj, did that, but that has not solved the problem. Anyways since no inputs am closing the thread.
Warm regards.
Venkat - SD

Cancel the excise invoice in Intra company stock transfer

Dear Gurus,
I have one issue in CIN.
The following are the my sequence of operation.
Intra company stock transfer.
1. Purchase order with UB. (from plant A)
2. Delivery ( from plant B),
3. PGI ( from plant B),
4.Excise Invoice ( from plant B to A),
5. Billing ( from plant B),
6. Creating Excise Invoice without purchase order Manually (from plant A),
after PGI and Before MIGO.
7. MIGO.
Now i want to cancel the Excise invoice in Plant A.
how can i cancel the excise invoice.?
kindly provide the valid information.
Thanks.
Best Regards
Anbu

In T.Code: J1IIN, there is an option of deleting / cancelling the Excise Invoice. On the top most left hand side (after entering the Excise Invoice number) select Excise Invoice --> Cancel / Delete.
Here it is possible to cancel the Excise Invoice.
Regards,
Rajesh Banka

Error in capturing excise invoice during stock transfer

Hi
When we are capturing an excise invoice in t code j1iex with reference to stock transfer order, system is giving an error message
Excise Invoice 0000100135 30.09.2009 of plant 300007 does not exist
The excise duties are not captured into the excise invoice.
pls resolve this issue
Regards
Suresh

Hi There
we will be using J1IIN for the transfer for the simple reason that you cannot move the goods from the manuefacturing plant without paying the excise duty.
regarding your second query I am unable to understand your exact requirement but as per my understanding you will do the good receipt and CENVAT will be credited and outgoing or stock transfer will happen as the regular process afterwards by debiting the excise duty from the CENVAT account
Hope this will help
Manu Seth

Intercompany Stock transfer order with excise

Hi,
Can anyone tell me about Intercompany Stock transfer order with excise step by step.
hoping to replu

Hello,
Create Stock Transport Order - ME21N
Create Delivery Challan (DC) - VL10B (this reduces the inventory from supplying plant)
Create Excise Invoice refering the DC created above - J1IS - Ref document type OTHR (Excise values are transfered in this step)
Do goods receipt against the DC (outbound delivery) - MIGO in receiving plant. Also capture and post the excise invoice cerated in J1IS.
Regards
Mahesh Naik

Stock transfer order excise

Dear Experts,
Can i know wt are the special things comes in stock transfer order excise compare to domestic excise process?
i know abt domestic excise invoice process.. pls let me knoe the process of stock transfer order-for excise --
Regards
ishikesh

Do the following steps for STO Customizing:-
1. Create a customer master record for the issuing plant.
2. Create a vendor master record for the issuing plant, and enter customer account number in the Customer field on the Control screen.
3. Repeat steps 1 and 2 for the receiving plant.
4. Assign the plants to the customer master record in Customizing for Materials Management (MM), by choosing Purchasing <Purchase Order < Set Up Stock Transport Order< Plants.
The Process Flow would be as follows :-
Create a stock transport order, following the standard procedure, and send the order to the issuing plant.
Issuing plant has processes your order, and when it is ready to ship,the storeperson at the issuing plant issues the goods using a transfer posting. The excise clerk there creates an excise invoice.The excise supervisor verifies and posts the excise invoice.It then sends the goods to you, together with the excise invoice.
Once the goods arrive, you follow the standard procedure for incoming excise invoices:
The excise clerk captures the excise invoice, using the stock transport order as the reference document. The storeperson enters the goods receipt, again using the stock transport order as the reference document.Alternatively, you can first enter the goods receipt and then capture the excise invoice.
The excise supervisor then posts the excise invoice.
Best Regards,
Ankur

Settings for capture excise invoice in MIGO and other settings

Hi,
For excise invoice capture and post procedure which we are following is as follow
1 : For Local Excise invoice
     After receving goods from Vendor first we are Doing J1IEX Part 1, Capture excise invoice after saving this we are getting part 1 number, then we are making GR with MB01 ref. to part 1 number , then qyuality inspection then updating material in Unrestricted stock from quality afetr that we are doing J1IEX poat PART 2 here we are getting part 2 number then invoice verification,
2 : For import PO
      First MIRO for custom delivery cost we are getting MIRO number, then J1IEX part 1 ref. to MIRO number and year then MB01, ref. to part 1 of J1IEX then quality quality to store then J1IEX Part 2 then MIRO for vendor.
now in many thread i read about capture invoice in MIGO   so i want to know the detail settings which required to be made so that we can perform our ruoutin in short time.
regards,
zafar

hi
>is there will be any effect in our existing procedure We want to follow both for some time , after that we will do only in MIGO,
yes u can use both simultniously
but in MIGO if u capture, the step of updation J1i5 will be ommited (it will take palce automatically)
like currently ur doing capture >update >post
in migo only capture and then post
>second think is that now while posting the capture excise invoice in J1IEX we rae entering part 1 number, so can we do woth >this while capturing it thorugh migo or we have to post with vendor excise invoice number only.
You can do capture and post simultaniously in migo only
the separate transaction is given as persons or users may be diffrent for GR and excise
if the same user want to do the GR and cap and posting then yes he can
for capture and posting u also have to tick Post Excise Invoice Captured in MIGO in excise grp settings
regards
kunal

Default vendor is coming in J1IG transaction while capturing excise invoice

Hi,
While capturing excise invoice at depot by using J1IG transaction, i am getting default custom vendor automatically.
This is for STO transfer i am capturing excise.
I have maintained some other custom vendor in the p.o.
Pls. let me know from where it is picking the default vendor?
Thanks
Regards
Rifaie.M

Thanks

Capturing Excise Invoice (EI) at depot

Hi gurus
I am facing an issue while capturing Excise Invoice (EI) at depot.
If non-batch material and batch material are combined into one material document which is generated after post goods issue (PGI) to create EI, two separate Excise Invoices are getting generated automatically.
But while capturing Excise Invoice for both materials at depot, I am NOT able to capture in T-code J1IG by Goods receipt material documents.
How to handle such case? Could you give us some suggestion?
With Regards
baalakrushnan.da

Hi Ashok,
After MB1C, when we are trying to execute J1IG with the material document number and then click "Details" button, the new screen asks for internal document number. We click on "More Documents" and manually enter the excise values along with excise invoice details and save.
This reflects the values in the RG23D and displays in J1IDEPOTSTOCK1 report also.
But when we try to sell from the Depot and create J1IJ, the uploaded invoice is not getting displayed when we are trying to select it to pass excise value.
How can this invoice be selected in J1IJ, if we follow this route.
Is this the correct process or I am making some mistake in the J1IG step.
Regards,
Debarshi

BAPI for Capture excise invoice

Dear Friends
I wish to is there any BAPI available for capture excise invoice (tcode:- J1iex).
please tell. I will apreciate your help.
Regadrs
Naeem

hi
pravin
both the bapis are part of the Jiex tcode's program and their works fine.. may be you are not giving the all the values required over there.. in my case i have to work with the BDC... as i am also failed to implement it.
Regads
Naeem]

Problem in capturing excise invoice

Dear Experts,
I am facing problem at the time of capturing excise invoice in J1IEX.
A message always displays is "Excise Details are not maintanied for Vendor 9000232"
Message no. 8I565
When i am entering excise invoice with reference to PO, without PO or even the Goods Receipt.
Can anybody tell me how to overcome this error.
Thanks & Regards
Prasant Sekhar

hi,
In J1id maintain vendors excise details
Regards
Kedar

Capturing excise invoice after MIGO

Hi All,
How can we capture and post excise invoice when GR already done for the PO., (material missed in J1ID and no condition records maintained while raising the PO), I have done the following, but I am unable to post part2:
1) Maintained the material in J1ID
2) Maintained the excise condition records
3) Captured the Excise invoice(J1IEX) with reference to GR document
4) Tried to post the Excise invoice thru J1IEX, but getting message"No Part I exists for availing credit in excise invoice"
Your prompt response is highly appreciated
Regards,
Sattuj

Hi
You have captured excise invoice w.r.t GR document. But at time of MIGO, you should select "part 1 entry only" in excise tab and thus create a GR document. At this time, part 1 entry would be made. Then you can capture and post excise invoice with ref to GR document.
Please note that without part 1 entry, part2 (posting of excise invoice) is not allowed legally and SAPically.

GR item reversal created problem to capture excise invoice

Dear All,
GR posted for 2 item with 2 different PO#. Due to price changes second item reversed for the GR and the first item remain in the same GR. While capturing excise invoice by J1IEX for the GR the system shows Document xxxxxxxxx does not contain any selectable items. IR has done for the GR and Payment also made for the same. So we can not reverse the GR. Kindly let me know the possibilities to capture excise invoice for the first item mentioned above.
Thanks...

Dear Arun R,
You Kindly go to the following path and maintain your movement type over their and do the MIGO.I am very sure at the time ot migo excise tab will come for part-1 updation and subsequently you capture part-2 on J1IEX.
SPRO->LG->Tax on Goods Movemet->India->Business Transactions->Incoming Excise Invoice->Specify which movement type involve excise Invoices.
Hope this will help you out.
Regards
AKS

Capture Excise Invoice w.r.t Stock Transfer Order

Similar Messages

Maybe you are looking for