Copy control for sale office in delivery

Hi,
In our delivery note the field sale office is blank... we need that this field will be filled by copy control or user exit from document sale (order sale)... always the deliveries are for the same sales office.
Any clues for achiving this?
Best Regards
Juan

Hi
As mentioned in the above answer, please follow the following steps.
1. Got VOFM - > Data Transfer -> Deliveries.
2. Copy Routine 1 to 601.
3. Go in the code of routine 601 and add the following line.
MOVE CVBAK-VKBUR TO LIKP-VKBUR.
4. Activate the routine.
5. Go to copy control for deliveries Tcode - VTLA.
6. Select the necessary combination of order type and delivery type.
7. change the assignment of routine for header data to 601 and save.
you shud be abe to achieve the desired result.
Regards
Yatin

Similar Messages

  • Does anybody know table for copy controls from Sales document to Delivery

    Hi,
    Does anybody know table for copy controls from Sales document to Delivery. Especially for item level.
    Regards,
    Praveen

    >
    Lakshmipathi wrote:
    > Almost all members know copy control from sale order to delivery.  What exactly your problem is ??   Please post that and avoid asking questions like this !!!!!!!!!!
    >
    > thanks
    > G. Lakshmipathi
    Sorry for my post. I guess you were a wee bit quicker than me in the reposnse

  • Copy control for sales douments

    Hi to all. I just wanted to find out about a minor issue. When creating my sales document with reference to a previous sales document (example a quotation with reference to an inquiry), it does not pick up the line items (material and its quantity) from the predecing document (no line items in my quote that are in the inquiry). had a look at my copy control, and my copy requirements for these document types are 302 "Always an item".
    Please advise.
    Regards
    Ebraim

    Dear All,
    Thanks for the very helpul insight. I looked at my copy control configuration and it seems I had missed a small setting.
    I have a new problem now....
    When I try to post goods issue after completing the delivery, it gives me the following error:
    "For plant P100, material type FERT is not defined in Table T134W"... I havechecked the table in se16, and material type FERT is there.
    Please advise, and thanks alot.
    Regards,
    Ebraim

  • Copy control from Sales order to Delivery field FAKSK (Billing Block)- VTLA

    Hi All,
    I'm facing a standard issue, inputs and resolution from you would be appreciated,
    Issue is, If we put the Billing block in Sales order header this should not allow us to create an Invoice, But in my examples i can create the Invoice without any errors!
    The billing block from SO will be copied into Delivery header? if yes this will definitely not allow in my cases to create an Invoice, but i cannot see the Billing block copied into my Delivery! any Copy control settings missing?
    Why the Invoice will not check the Billing block from Order while creation?
    Thanks and best regards,
    Siddaram

    The billing block from SO will be copied into Delivery header? if yes this will definitely not allow in my cases to create an Invoice, but i cannot see the Billing block copied into my Delivery! any Copy control settings missing?
    Check Copy settings in VTLF tcode. Target is your delivery type. Source is your Sales Order type. Double Click to see Data transfer. Click on the small icon in field Header Data. Find your routine number and select source text. Look at the code if there is mention about LIKP-FAKSK field. You don't have ABAP, search the forum or google on how to comment it on your own to remove this data transfer.
    Why the Invoice will not check the Billing block from Order while creation?
    Check Copy settings in VTFA if it is Sales Order to Billing or VTFL if it is Delivery to Billing. Do something like above to find routines. But this time round is to check Copying requirements not data transfer and it can be at billing type level or at item level. If no check on VBAK-FAKSK field, you can copy the standard routines or make modification to customized routines to build the requirements checks. If no ABAP, search google on how to change routines.

  • Copy Control for Sales Order

    If you want to copy one particular pricing type (say "H") to a limited number of sales order (say 10). How would you do it without letting it take effect on all the other sales orders ?
    Let me rephrase the question.
    In the copy control settings, there is a pricing type that you can define for Sales Document to Sales Document at the Item Category Level.
    Originally it would be at "A".
    So now you want to change the pricing type for 10 sales orders previously created without affecting any other. How would you do that?
    Thanks

    Hi Noel,
    You can control through copy control settings for the future documents not for the already created document.
    And you also mentioned that the specific pricing type only for ten orders that you can do it manually,you put the pricing type what you want in the copy control settings then create 10 sales orders then change that pricing type to standard one then it will continue the stanadrd process
    I hope it will help you
    Rwegards,
    Murali.

  • Copy Control for Sales Document to Sales Document

    Hi Gurus Good Morning to Every body,
    here my quesry is I have two sales order types.
    ZST1 and ZST2.
    first i created a sales order in sales document type ZST1, system has generated a no.
    now here i am creating a sales order(ZST2) with reference to above sales document no.which has generated in above step.
    then i save this document.
    here my question is when i am taking with reference of the same sale document no second time which has created in ZST1
    system is automatically copying but here i want to generate a warning message or error message.
    but system is not doing like that.
    system is copying full quantity with out generating a message.
    dear guru's please give the need full help.
    with regards,
    Edited by: SDGURU on Oct 12, 2009 11:38 AM

    Hi,
    This can be done at the ITEM CATEGORY level
    Goto the transaction code VOV7 and choose your item category and maintain the COMPLETION RULE with B, then once the Source document was fully referenced then next time when you  want to create the sales order with reference to the order referenced already, system will throw error.
    Try this,
    Hope it will serve your purpose.
    thanks,
    santosh

  • Copy control for inbound delivery

    Hi All,
    I need some help for copy control for inbound delivery. Can any one let me know where is the customization for this?
    Is it t.code VTLA.
    Path in IMG:Logistics Exectuion-->Shipping>copy control--
    >specify copy control for delivery
    But I am not sure if the above is the correct customization path.
    The reason....
    for target document type EL(Inbound delivery) the source document type is DL (order type schduling agreement). Ideally for inbound delivery the source document type should be purchase order. But I can't find the purchase order document types in F4 option.
    All documents which are showing are sales order.
    Awiting your reply.
    Regards,
    Sushanta

    Specify Copy Control for Deliveries
    In this menu option, you define control data for the document flow of deliveries.
    You can specify for a particular delivery type, which document type is to be assigned to copied reference documents, and which item categories are to be copied.
    You must also make specifications for copying requirements and data transfer, as well as quantity and value updates in document flow. This must be done for each copying procedure at header and item level on a detail screen.
    Note
    If you define new sales document types, item categories or schedule line categories by copying existing ones, the SAP system automatically copies all specifications for the document flow. You may want to check the copy controls for newly created sales document types, item categories or schedule line categories.
    Actions
    1. Check the document flow defined in the standard SAP R/3 System.
    2. Define to what extent you have to modify its specifications to meet your requirements.
    3. Define the document flow for deliveries with reference to sales document types.
    Note
    Make sure to maintain copy control for the following areas:
    Sales documents
    Deliveries
    Billing documents
    If you cannot find an entry, check the copy controls in other chapters.
    Complete overview of copy control:
    In the chapter on sales, you can find copy controls for:
    Sales documment by sales document
    Billing document by sales document
    In the chapter on deliveries, you can find copy controls for:
    Sales document by delivery
    In the chapter on billing, you can find copy controls for:
    Sales document by billing document
    Delivery by billing document
    Billing document by billing document

  • Copy Control between Sales Orders and Deliveries

    Hi Gurus,
    please can you tell me why copy control between Sales Order and Delivery doesn't work?
    At header level, into copy control, we can set 2 requirement routines, one as general requirement for copying (TVCPL-AUBED) and the other one as requirement for grouping orders into deliveries (TVCPL-AUZUS).
    At header level we can also set a routine for data transfer to define how data are passed from Sales Order header to Delivery header (TVCPL-GRUAK).
    Then we can set routines at item level, one as requirement (TVCPL-AUBED) and one as data transfer (TVCPL-GRUAP).
    When delivery is created with VL10A transaction, at header level only the first  general requirement routine is used (FV50B***). Grouping requirement is not used (we also set a break point and the program is not passing into this routine).
    Then it is used the requirement routine at item level (FV50B***).
    Please can you tel me how we camake working the routine for grouping requirement at header level?
    Thank you very much.
    Kind Regards
    Andrea

    Hi, we used standard routine even if to be sure we run also the generation report you mentioned.
    Please any other suggestions?
    Thank you very much.
    Kind Regards
    Andrea

  • Copy controls for Consignment

    Hi ,
    I  have been working on all the  consignment types,i have tried to copy the standard document types i.e. cf,ci,cp,cr to zcf,zci,zcp,zcr but what happens is i am able to process the order by in delivery i get an error saying that tables have not been copied ,i went to "maintain copy controls for sales document" and checked if all the tables have been copied or not in the item and schedule line  ,and i found out that it was not , so i am trying to create a new copy control for zcf ,zcp....etc ,i have checked my cp ,ci they are all blank so if any body could send me some details across for the same or suggest any other alternatives it would be great so that i could key in the details in the respective category
    Thank you,
    sneha

    Hi,
    If you are getting the Table name in which the Entry is missing, Goto -> SM31, Enter the Table name -> Select Customizing -> Continue without Specifying Project.
    System will take you to the desired node in which the entry needs to be maintained.
    Please check with this and confirm.
    Reward Points if it Helps !!!!!
    Harsh

  • Copy function for sales order

    I want to create a sales return, and use copy with reference to do that. But if the sales order items cate is TAB, then those items cannot be copied, I check the config dosen't find the TAB item for order type, even in the standard, RE to OR, I question that whehter is not make sense to copy TAB items. Anyone try add TAB item to copy function? Thanks!

    Use T-Code - VTAF (IMG - Sales and Distribution - Sales - Maintain Copy Control for Sales Documents - Copying Control: Billing Document to Sales Document
    Here select your Invoice Type & Sales Returns Documents type & double click in Item on left hand side. You will list of available items & you can also add new Items here.
    Hope this helps...
    Thanks,
    Jignesh Mehta

  • Combination requirement in copying control for delivery

    Hello Gurus,
          in copying control for delivery, there is a "combination requirement",  these are just routine number, how can I check these routine to see which fields are used for combination ? or there is other approach I can use to get this information?
    thanks very much!

    Hi zhang
    Just press F4 in the requirement tab and you will get plenty of routines 
    like 151,etc Just highlight that requirement and click on the source text you can find the sub routine written fro that number .In that source text you can see from which feilds routine has  been written
    Regards
    Srinath

  • Copy control for opportunity to Sales order not working

    Guys,
    I am working on CRM 2007. I set up the copy control for transaction types so that I can convert my Custom Opportunity type to a Sales order.
    However when I am in my Opportunity and click on Follow of transactions, my order type is not availabel in the selection list.
    I was able to set it up for Lead to Opportunity but opportunity to Sales order is not working.
    Any help on this?
    Ani

    HI Anirudh,
    I have a similar requirement such as Copying line item from Complaints to Returns application.
    Procedure:
    1. Firstly i create an complaint
    2. create a follow up document as Returns
    3. I enter an product in the complaints and when i click on Copy to returns the line item has to be copied.
    Here is the requirement. The line item is copied, but here the problem is, .... The line item doesn't get copied unless and until the instance of the target is retrived.
    Could u please help me on this ?

  • Copy Control For Individual Purchase Order

    Hi, experts,
    can you explain to me concretly how to customize the copy control for individual purchase order? We have of course the item category TAB (billing relevance: delivery-related billing) and Sales Order (delivery related billing type: F2). How will the copy control customized with tranc.VTFL? Please give me hints at both header level and item level. I appreciate your help.
    Best regards,
    Fan.
    Edited by: Fan Mou on Jul 22, 2009 11:49 AM

    Hi Fan Hou,
    The individual Purchase order scenario is as:
    Sales order  >Purchase Requisition>Purchase order-->Good receipt --> Delivery and PGI --> Billing(wrt Delivery)
    The  creation of purchase requisition and thereby purchase order is controlled by the schedule line(in std CB). The goods are received with ref. to PO.
    As far as copy control is concern it will be as
    1)OR-->LF and item category will be TAB
    2)LF-->F2 at header level .( can refer the std, )
    at item level it will have item category TAB.and will be as
    Copying requirements  004
    Data BARK/BURP  001
    Billing quantity  B(Delivery quantity less invoiced quantity)
    Pos./meg. quantity +
    Pricing type G
    For further reading /reference you can go through the:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/70/a7853478616434e10000009b38f83b/frameset.htm
    Hope this will help you.
    Revert us in case of any issue.
    Regards,
    Atul

  • Where do we maintain the copy control  between sto (PO) to Delivery

    Hi all,
    Could please provide the info  " where do we maintain the copy control between po and delivery "
    .we have copy control  between sale order & delivery so all so info will copy to delivery . like that where maintain the copy control between PO and  delivery.??

    Hi
    I think we don't have any copy control like in sd,but we can maintain relation between delivery and po by po docuement type
    see following path
    spro-MM-purchasing-Purchase order-set up stock transfer order-assign delivery type and checking rule
    and  in same path define shipping data for plant
    for Doc type NB - delivery type NL
    for doc type UB-Delivery type-NLCC
    Regards
    Kailas Ugale

  • Copy control from PO to outbound delivery

    How is the customization of the copy control from the purchase order to outbound delivery is done (especially for the intercompany processes)?
    Thanks in advance for the answers.

    The customization of purchase order to delivery are done two places, first at SPRO->Materials management->Purchasing->purchase order->set up stock transport order. Here the customer number/sales area are assigned to both supplying and delivering plants. From this customer number, the shipping data are utilized in creating the shipping document, for example shipping conditions. The copy control from purchase order to delivery is done at SPRO->Logistics execution->shipping->deliveries->copying control->specify copy control for deliveries. Here check the settings made for DL ->NL (STO) and  DL->NLCC (Cross company) copy control settings. The delivery document types NL and NLCC are assigned with value B-Purchase order required in the order required field in t.code 0VLK. By this way, the system understands, the data must be copied from purchase orders.
    Regards,

Maybe you are looking for