Copy items from SD order to CS order

Hello all,
I'm implementing a sales process with CS order generated automatically from SD order. I'm already able to generate the CS order automatically when the SD order is saved. My questions is how can I defined that the materials from the SD order are copied to the CS order?
At the moment the CS order is created without the materiais that exists in the SD order.
Thanks for your help.
RB

Hello,
I like to know how you did the SD order to the CS order?
For SO to SO use VTAA.
Regards
Waza

Similar Messages

How to copy images from another MC in reversed order??

Hi everyone,
I'm new to AS3 and have been fighting and searching for a solution to this problem for a week now, and I'm VERY close!
I crated a MC holding of a series of images (about 50) and I jump around in it using plenty AS3 scripts (most of which I don't fully understand yet, but I'm working on that to! )
I had to find a way to "rewind" (= play backwards) the MC. Since there is a stop(); command in almost every frame, prevFrame does not work and if I put that in a loop, it goes WAY to fast (but worked).. So I could think of only one way...
Create a new (reverserd) MC with the same image sequence ald reverse it manually and play that one.
This all works fine (very proud of it ).
Now my question:
To get this to work for multiple image sequences, I have to load all images twice (once in MC_1 and again in MC_2 and select them and reverse them).
Not a big one, unless you want to create MANY of those SWF's...
Is it possible to load the 50 images of the first MC in reverse into the second MC dynamically? JUST the images, noting else.
extra info: the MC_2 is already in the lib(empty) and placed on the stage.
something like:
var pointer:Number=1;
for (var:i:Number=50;i>=0;i--) {
get MC_1.picure(var);
put it in MC_2.frame(pointer);
pointer = pointer + 1;
All help is welcome and please take into account that I have little experience and copy most of my scripting from people like you
T.I.A.
Melluw

I tried your advice (thanks for that)
The event I already have is the mouse leave
I //-d out the part I removed (what did work)
The code I ended up with is:
function Start() {
stage.addEventListener(Event.MOUSE_LEAVE, cursorHide);
function cursorHide(evt:Event):void {
var currFrame = MC_1.currentFrame;
if (CCW == true) { //it is true in this case
movStart = (50 - currFrame);
else {
movStart = currFrame;
if (movStart>25) {
MC_1.prevFrame();
// removed swapChildren(MC_1, MC_2); // This is the part I removed
// removed MC_2.gotoAndPlay(movStart);
else {
MC_1.gotoAndPlay (movStart);
And if I leave the stage on the part where movStart is indeed >25
Nothing happens,
So I guess this is not what you meant
Subject: Action Script 3 how to copy images from another MC in reversed order??
I cannot direct you in the loading of the images approach, it will be too complicated, and will probably not work anyways... when you move away from a frame that has dynamic content, you lose the content. So basically, there is nothing practical in taking that approach.
I do niot understand what the problem will be with the enterFrame/prevFrame approach. If everything you can do with the mouse is already used (which I doubt) by the first mc, then there is nothing else you can do with this file. You probably just need to rethink your control scheme. You should search Google for "AS3 slideshow tutorial", and to lighten up your design, add "XML" in that search.
>

Outlook 2013: Imported or copied items from .pst file disappear after a few seconds

I am migrating from an open source email platform (Axigen) to Outlook/Exchange 2013. The Axigen system uses a connector for Outlook allowing users to use Outlook as a client.
To move from Outlook 2010 with the Axigen server to Outlook 2013 with Exchange I have exported the entire mailbox from Outlook 2010 to a .pst file which I am then trying to import into Outlook 2013.
The import process appears to complete successfully and the imported items show up in Outlook 2013 - but only for a second or two. Then they disappear completely, nowhere to be found. This happens with ontacts, emails and calendar items and the result
is the same whether I import the entire mailbox or just a folder at a time.
If I OPEN the .pst file into Outlook 2013 everything in it looks perfectly OK, I can view items with no problems, all folders are there with their correct content. Now if I try to move or copy
items from the opened .pst file into the Outlook 2013 mailbox, I get the exact same symptoms as when importing. Items show for a couple of seconds and then disappear. If I copy or move a
folder, the folder remains in the Outlook 2013 folder tree but the items in it disappear.
Why would items be perfectly visible and readable from an opened .pst file but disappear when they are copied into the new 2013 mailbox?
They are not visible in OWA either, btw, so this is not just Outlook not displaying them, they are really gone. Checking the folder size in Outlook shows an empty folder (size 0, 0 messages). I have tried the /cleanviews switch when starting Outlook.
This has me completely stumped. Any ideas?
Thanks in advance!

More strangeness:
I set up an Android phone to sync with this account just now. I imported my contacts list from the phone into the Exchange account. After sync, all the contacts are perfectly visible on the phone, but NOT in Outlook 2013 or in OWA...
So maybe it is some sort of display filter thing after all?
That's unbelieveable that message is visiable in Android phone through Exchange ActiveSync but cannot be viewd in OWA...
For the database session, we may enable
Exchange Mailbox Audit logging(http://technet.microsoft.com/en-us/library/ff461937(v=exchg.150).aspx) to check if the message is indeed upload into DB from Outlook.
For the client level, please enable Outlook logging to log what happens inside outlook to aid in your troubleshooting.
We can enable Outlook logging in Outlook 2013 under File > Options > Advanced > "Other" section
Log files are created as .etl files and stored in %userprofile%\Local Settings\Temp. A new log file is created each time Outlook starts.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected].
Okay, I have enabled Outlook logging. However I cannot find any way to read those .etl files.
I also enabled audit logging in Exchange but as I understand it that will not log operations performed by the mailbox owner, only non-owner access.
I think I am close to giving up on this. I can't believe an enterprise email platform will simply delete messages copied into a mailbox without any error message whatsoever, and no way for an admin to track what is happening.
It is definitely happening when syncing with Exchange, so there must be something in these items (and
remember this happens not only to email messages, but also to Contacts) that makes the Exchange server decide these messages should be discarded witout warning.
One other thing: Folders copied from the .pst are visible on Outlook (although their contents are deleted) but not on ActiveSync clients. If I create a new folder in the mailbox, it syncs as it should.

Deleted items from Ipod Nano to make room for new. Emptied trash. Still getting error message when I try to copy items from ITunes to Ipod. What should I do now?

Deleted items from Ipod Nano to make room for new. Emptied trash. Still getting error message when I try to copy items from ITunes to Ipod. What should I do now?

If you delete songs (and other items) from the main iTunes library, yes, you need to empty the Trash because iTunes puts the song files into the Trash. When deleting items from an iPod, the items are not being deleted from the main iTunes library, so nothing should end up in the Trash.
Hopefully, you are not deleting items from your main iTunes library, just to sync those deletions from the iPod. If you are, there is a better way. You can post back if you want more info...

Using "PARAMETER.param_name as a "Copy item from value" reference

I a, using forms 9i and I am having a problem using a Parameter as a reference item. The parameter item is there and I am spelling it correctly, i have even cut and pasted the parameter name into the Copy item value. No matter what I do I get the same result.
FRM-30047: Cannot resolve item reference PARAMETER.PROJECT_UID.
Item: PROJECT_UID
Block: GRANT_SUMMARY
Form: GRANTS
FRM-30085: Unable to adjust form for output.
I have even added a colon to the word PARAMETER but this too fails.
Suggestions please

You have to assign it programatically as 'Copy item from Value' is mainly there to keep the master detail relationships. It actually expects a block item rather than a parameter.
Antony.

Copy item from Quotation to sales Order

Hello,
How can I copy all the line items from quotation to sales order including the price, Quantity & the Sales Texts?
Thanks
AK

Hi
Maintain copy control from sales document to sales document using t-code VTAA. Select your target & source sales document type from the list & double click on the same. There you can define the copy control.
For Text control you can use the T Code VOTXN & create your own text controls.
I hope this will be helpful.
Thanks & Regards,
Bidhu

Copying TLD from Sales Quote to Sales Order

Hi SAP experts,
We would like to copy the Trailing LD value at the item level, from a Sales Quotation to a Sales Order...when a Sales Order is created in reference to the quote.
VBAP-ZZTRLD on the Quotation...to VBAP-ZZTRLD on the Sales Order item level.
From my understanding, it will begin with VTAA...
Just looking for some guidance and information on the next steps.
Thank you very much in advance.

Hi Srinu,
Yes, sir.
The value for Trailing LD (either at the Header or Item level) is not getting copied over from the Sales Quotation to the Sales Order when creating the Sales Order in reference to the Quote.
I just did one example VTAA change to test...and not working
I even selected 'Complete Reference' checkbox, but still not copying the values in ZZTRLD from the quote to the sales order.
Thank you for your time and help.

Problems when copying item from a page to another one

I am copying a value of an item, from a page to another one in branch, and it cuts the value to me in ' : '
ej: item a = 08:00 Hs
item b = 08
thanks
Juan Pablo

I had to deal with the same thing and I know at least two solutions - one is "dirty" and the other one is a "clean":
1. dirty - replace ':' (colon) with ';' (semicolon) and pass that value using URL. On the page, where your item(s) is, create a computation using REPLACE(P1_ITEM, ';', ':') on load and before header.
2. clean - as Scott says and it works in many cases - pass only a primary key and a request to your target page and create there a procedure to fetch the values you need and populate the items
If you use the documentation and search on keywords "COMPUTATION" and "REQUEST", you will find a lot of usefull information.
Denes Kubicek

Copy item from List A to List B, generate 2 rows in List B

Hi,
I would like to copy and update items from List A to List B. However, I want the item to be duplicated in List B.
I will explain my scenario
- List A contains a People Picker column of multiple selection and a Title column
- When the form is submitted, a workflow should trigger to copy the item to List B. If the People Picker column contains 2 values inside it, for example, user1;user2. The copied item should be duplicated in rows according to the number of users.
Example
Columns Title, Users, ID
List A - TicketNo1, User1; User2, 1
List B - TicketNo1, User1 1
List B - TicketNo1, User2 1
Can this be done OOTB or must we use some event receiver..has anyone ever done such a thing before?

Hi,
Below code help you to accomplish your task using event receiver
public
override void ItemAdded(SPItemEventProperties properties)
//base.ItemAdded(properties);
if (properties.ListTitle ==
"ListA")
SPUser user = null;
//get value of fields
string strTitle = Convert.ToString(properties.ListItem["Title"]);
SPFieldUser userField = (SPFieldUser)properties.ListItem.Fields.GetField("TaskAssignUser");
SPFieldUserValueCollection fieldcollectionValue = (SPFieldUserValueCollection)userField.GetFieldValue(Convert.ToString(properties.ListItem["TaskAssignUser"]));
foreach (SPFieldUserValue fieldValue
in fieldcollectionValue)
                   user = fieldValue.User;
                   //Create items in another list
SPList destinationList = properties.Web.Lists["ListB"];
SPListItem targetItem = destinationList.Items.Add();
                   targetItem["Title"] = strTitle;
                   targetItem["WorkAssigned"] = user;
                   targetItem.Update();
Thank You,
Somnath Matere

Error when copying items from one table to another

I am trying to copy data from 2 archive tables within an
Access database to their twin production tables. The first table
copies perfectly with the code:
<CFQUERY NAME="moveArchAttach" datasource="faaco2">
INSERT INTO tbl_Attachment ( PostID, Attachment, AttachNote,
AttachName )
SELECT tbl_Attachment_Archived.PostID,
tbl_Attachment_Archived.Attachment,
tbl_Attachment_Archived.AttachNote,
tbl_Attachment_Archived.AttachName
FROM tbl_Attachment_Archived
</CFQUERY>
However, when trying to use similar code on the other table:
<CFQUERY NAME="moveArchPost" datasource="faaco2">
INSERT INTO tbl_Posting ( Title, FirstName, LastName,
PhoneNumber, RoutingSymbol, Email, IniDate, ComDate, SOLNBR,
PhaseCode, ProcCode, Posting, Password, RegionCode )
SELECT tbl_Posting_Archived.Title,
tbl_Posting_Archived.FirstName, tbl_Posting_Archived.LastName,
tbl_Posting_Archived.PhoneNumber,
tbl_Posting_Archived.RoutingSymbol, tbl_Posting.Email,
tbl_Posting.IniDate, tbl_Posting.ComDate, tbl_Posting.SOLNBR,
tbl_Posting.PhaseCode, tbl_Posting.ProcCode, tbl_Posting.Posting,
tbl_Posting.Password, tbl_Posting.RegionCode
FROM tbl_Posting_Archived
</CFQUERY>
I receive the error:
[Microsoft][ODBC Microsoft Access Driver] Too few parameters.
Expected 9.
Any help would be greatly appreciated, I am at a loss and
I've tried everything. Thank you.

I realized my error immediately after posting this topic and
subsequently have resolved this error. On 9 of the values, I have
listed the wrong table in the SELECT statement. This is why one
needs to take breaks instead of staring at a screen forever :).
Thank you anyway!

Copy text from allocation table to purchase order

I am unable to get header/item text to be copied to follow-on Purchase order. I am unable to link AK1, AP1 to purchase order text types. Help please.
Thanks.

I am unable to get header/item text to be copied to follow-on Purchase order. I am unable to link AK1, AP1 to purchase order text types. Help please.
Thanks.

Copying Partners from Qty Contract to Sales Orders

Hi
Business requirement is for Customer A Quantity Contract , A's is having different Locations like B,C...in different places. While sending goods to B or C sales order should create with ref to Contract. and invoice should create to B or C.
I maintained B & C as "AA Contract rel. ord for Sold to party and AW for Ship to Party.
If i try to release a order to B system giving pop up for selecting Ship to Party
and selected as B Ship to party, but Payer and Bill to party is copying as A.
but invoice should create on B.
how to map this can any plz guide me.
Rajendra

Better try to follow this
[Read This Before Closing your Threads |Read This Before Closing your Threads;
thanks
G. Lakshmipathi

Credit note - copy item from reference document

Hi SD Wizards,
When creating a price correction order referenced to sales invoice SAP returns an error - "Item xxxx is not copied from the reference document". The problem is strange beacause for the same material but not for the same batch a price correction is created.
I cheked in copy control but I think when it will be a problem there nothing will be copied.
Is someone meets a problem like that ? Where I should search a resolve ?
Best
Piotr

Hi ,
Thanks for replies ...
Lakshmipathi,
User tries to make a ZDR (Debit Memo Req NoQty) from a target F2 (Invoice) so I checked on VTAF on header and copying requirments is 021 -Billing header . Where else I have to check.
Hrishi,
I check it and 'do not copy batch' is not ticked.
Maybe I describe you a problem with more details.
Invoice F2:
Item.                      Material
10.                         10001
20.                         10002
30.                         10003
When user tries to do a ZDR (Debit Request) a message shows : "Item 30 is not copied from the reference document"
But when the user tries to do a ZDR (Debit Request) for another F2 (Invoice) - on F2 is the same material 10003 , but the batch is not the same - he can do it.
So where I can search a resolve ?
Best
Lukasz

Why can't you copy items from one Library to another in Creative Cloud?

The new Libraries feature is really cool. Except for one thing. Apparently you can't copy and paste between libraries.
Say it ain't so Adobe!
Seriously, I've tried in Photoshop, Illustrator and in my Creative Cloud account. I cannot select anything in my library, copy it and paste it to a new library.
How do you launch something without copy & paste?
Is there a setting or permission I've managed to not set correctly?
Thanks
-Paul

No reply from anyone at Adobe on this one?
It seems pretty critical. Why on earth would you create the ability to make a library, but forget to add any sort of copy & paste functionality?
Anyone out there?

Copying items from shared

I am able to see the shared network on my itunes folder and see the music. But how do I copy all of the music? Claire

I use an older iTunes. Back when I had wireless in my computer I could occasionally see iTunes libraries belonging to neighbors. I don't think it is intended you be able to copy those if it is to those you are referring.

Copy items from SD order to CS order

Similar Messages

Maybe you are looking for