Copying TLD from Sales Quote to Sales Order

Hi SAP experts,
We would like to copy the Trailing LD value at the item level, from a Sales Quotation to a Sales Order...when a Sales Order is created in reference to the quote.
VBAP-ZZTRLD on the Quotation...to VBAP-ZZTRLD on the Sales Order item level.
From my understanding, it will begin with VTAA...
Just looking for some guidance and information on the next steps.
Thank you very much in advance.

Hi Srinu,
Yes, sir.
The value for Trailing LD (either at the Header or Item level) is not getting copied over from the Sales Quotation to the Sales Order when creating the Sales Order in reference to the Quote.
I just did one example VTAA change to test...and not working
I even selected 'Complete Reference' checkbox, but still not copying the values in ZZTRLD from the quote to the sales order.
Thank you for your time and help.

Similar Messages

  • Do we have any BAPI to get the Sales quote or Sales order details

    Hi Experts,
    Do we have any BAPI to get the sales quote or sales order details from my other SAP system.
    My requirement is to get the sales quote or sales order details from the other SAP system.
    Please help.
    Regards,
    Chitrasen

    Hi Experts,
    Thanks for ur help. The BAPI is BAPI_SALESORDER_GETSTATUS which helps in fetching the sales quote information.
    Thanks,
    Chitrasen

  • How to copy images from another MC in reversed order??

    Hi everyone,
    I'm new to AS3 and have been fighting and searching for a solution to this problem for a week now, and I'm VERY close!
    I crated a MC holding of a series of images (about 50) and I jump around in it using plenty AS3 scripts (most of which I don't fully understand yet, but I'm working on that to! )
    I had to find a way to "rewind" (= play backwards) the MC. Since there is a stop(); command in almost every frame, prevFrame does not work and if I put that in a loop, it goes WAY to fast (but worked).. So I could think of only one way...
    Create a new (reverserd) MC with the same image sequence ald reverse it manually and play that one.
    This all works fine (very proud of it ).
    Now my question:
    To get this to work for multiple image sequences, I have to load all images twice (once in MC_1 and again in MC_2 and select them and reverse them).
    Not a big one, unless you want to create MANY of those SWF's...
    Is it possible to load the 50 images of the first MC in reverse into the second MC dynamically? JUST the images, noting else.
    extra info: the MC_2 is already in the lib(empty) and placed on the stage.
    something like:
    var pointer:Number=1;
    for (var:i:Number=50;i>=0;i--) {
    get MC_1.picure(var);
    put it in MC_2.frame(pointer);
    pointer = pointer + 1;
    All help is welcome and please take into account that I have little experience and copy most of my scripting from people like you
    T.I.A.
    Melluw

    I tried your advice (thanks for that)
    The event I already have is the mouse leave
    I //-d out the part I removed (what did work)
    The code I ended up with is:
    function Start() {
    stage.addEventListener(Event.MOUSE_LEAVE, cursorHide);
    function cursorHide(evt:Event):void {
    var currFrame = MC_1.currentFrame;
    if (CCW == true) {  //it is true in this case
      movStart = (50 - currFrame);
    else {
      movStart = currFrame;
    if (movStart>25) {
      MC_1.prevFrame();
    // removed swapChildren(MC_1, MC_2); // This is the part I removed
    // removed MC_2.gotoAndPlay(movStart);
    else {
      MC_1.gotoAndPlay (movStart);
    And if I leave the stage on the part where movStart is indeed >25
    Nothing happens,
    So I guess this is not what you meant
    Subject: Action Script 3 how to copy images from another MC in reversed order??
    I cannot direct you in the loading of the images approach, it will be too complicated, and will probably not work anyways... when you move away from a frame that has dynamic content, you lose the content.  So basically, there is nothing practical in taking that approach.
    I do niot understand what the problem will be with the enterFrame/prevFrame approach. If everything you can do with the mouse is already used (which I doubt) by the first mc, then there is nothing else you can do with this file.  You probably just need to rethink your control scheme.  You should search Google for "AS3 slideshow tutorial", and to lighten up your design, add "XML" in that search.
    >

  • Copy Text from one quote to another

    Hi
    I need to copy text/notes related to one quotation to another.. I tried FM SAVE_TEXT and CRM_TEXT_MAINTAIN_OW but neither of it worked...
    Can anyone help me with this ?

    Hi Ashwineee,
    U can copy text from one quote to another by customizing also
    Just Check the settings of your text type in the text determination procedure.
    Select ur  text type and click on details u will find the text id description sequence and
    Transfer  field u have various options  u select the option "B" for ur text type .
    U can take reference of the  Standard Text determination Procedure "ORDER001"  for doing the same
    for your text determination Procedure
    Menu Path--
    Crm-Basic Functions- Text Management-Define Text Determination Procedure - select the Object --
    example for CRM_ORDERH and click on Procedure and select ur text determination procedure --     
    Select  Definition of Procedure that gives u details of  your   text type  and  its  options
    Hope it will Resolve ur problem
    Regards
    Pavan.A

  • Query to determine sales quote and sales order

    Hi
    I am working on User exits.Whenever a sales quote or a sales order is saved the user exit USEREXIT_SAVE_DOC_PREPARE  gets triggered.I need to check whether a sales quote is being saved or a sales order is being saved.
    Can anyone tell me where i can find whether the save operation of sales quote or the save operation of  the sales order has triggered the user exit.

    Hi,
    Check for the field VBTYP of XVBAK or YVBAK structure, if it is 'C" then it is Sales Order,if it is 'B', then quotation.
    Regards,
    Anji

  • Copying Partners from Qty Contract to Sales Orders

    Hi
    Business requirement is for  Customer A  Quantity Contract ,  A's is having different Locations like B,C...in different places. While sending goods to B or C  sales order should create with ref to Contract. and invoice should create to B or C.
    I maintained B & C as "AA Contract rel. ord for Sold to party and  AW for Ship to Party.
    If i try to release a order to B system  giving pop up for selecting Ship to Party
    and  selected as B Ship to party, but Payer and Bill to party is copying as A.
    but invoice should create on B.
    how to map this can any plz guide me.
    Rajendra

    Better try to follow this
    [Read This Before Closing your Threads |Read This Before Closing your Threads;
    thanks
    G. Lakshmipathi

  • Sales Quote and Sales Order for Service Module.

    Hi All,
    I have a scenario with one of the customer where they have a Service Department. The customer is into installation and servicing of Air conditioning systems.
    The scenario is as mentioned below:
    Customer does the installation of Air Conditioning work and then provides service to the same, if contract mentioned that service is also to be provided by same team. There are also times when the customer quotes only for Servicing of the Air Conditioning in the Projects where the installation is not done by them, but a third party. In such case the customer sends his Sales Quotation for taking up the Servicing of the Air Conditioning (AMC for a year), to be provided to the principle client. If he wins the opportunity then the same will be transferred to Sales Order.
    Now in SAP Business One the Service Module starts only with Service Contract and Service Warranty Templates. This is considering that the equipments are delivered by the Contractor him self. This scenario is fine.
    But for equipments which are not delivered by the customer, then manual Customer Equipment Card can be prepared and then service contract created to it. But here there is a disconnect between the Quotation that they send to principle and attaching the Sales Order, if the Service Bid is won by Customer. If i need to keep a reference as to which Sales Order was received by Customer from Principle in Service Contract, there is no provision for same.
    Is there any way i can do it other than creating a UDF and linking the sales order number to Service Contract and not developing any screens for same?
    Require all your valuable inputs..
    Regards
    Rohan S. Kamble

    Hi Rohan........
    There is no such standard field in Service Contract to attach Sales Order. You can create UDF else you can have FMS and map it to remark field.
    And when you copy it to service call you can attach the same SO at Activity level or it will be attached automatically as yiu are defining it into the service contract.........
    Regards,
    Rahul

  • Copy text from allocation table to purchase order

    I am unable to get header/item text to be copied to follow-on Purchase order. I am unable to link AK1, AP1 to purchase order text types. Help please.
    Thanks.

    I am unable to get header/item text to be copied to follow-on Purchase order. I am unable to link AK1, AP1 to purchase order text types. Help please.
    Thanks.

  • Copy closed or cancelled sales quotation to sales order

    2007A SP0 PL49
    It is possible to copy a closed/cancelled sales quotation to a sales order. It is also possible to copy to sales order several times. What is the reason for this? Has this always been the way it works?

    Yes it's possible and been around since we started with SAP 2005A. We use sales quotes extensively and treat them like standing orders.  We have customers that order the same items over and over daily/weekly, and rather than have to key in those sales orders over and over we use the document generation wizard to copy sales quotes to sales orders based on UDF we have added.
    If you want closed sales quotes to be blocked from adding to a subsequent document I am sure this can be done with stored procedures.

  • Requested delivery date not copied from quote item to order item

    CRM 7.0 copying from a quote to an order is ot copying the requested date at the item or header.
    For  the Header we are using copying routine SLSHDR and for the item SALES
    There is a date profile assigned to both the quote & item category, these objects are in the date types.
    BILL_DATE                           Billing Date
    INVCR_DATE     Billing Document Created On
    OPP_DEL_DATE     Requested Delivery Date
    ORDERACTUAL     Actual Dates
    REQ_DLV_DATE     Rqstd Delivery Date Proposal - Order Hdr
    VALIDFROM                           Valid From
    VALIDTO                           Valid To
    This seems like it should not be so complicated, we are looking at a Badi for the copy rules but has been challenging to say the least.  It seems like there should be a way to configure (not code) this issue.

    SAP OSS stated functionality not supported, we pushed it back a couple of times.  Even though this is out of the box functionality in ECC copying a quote to an order.
    Our developer was able to code a solution in method IF_EX_CRM_COPY_BADI~DATES, our ecommerce app calls this function when the quote is converted to an order in ISA.

  • Copying Quantity from Contract to Order

    Dear all,
    I am having problems copying quantity from qtty contract to sales order. I am creating multiple sales orders against the same contract and would want only the open quantity (total contract qtty - qtty for which sales orders have been created)  to be copied into the order qtty. However, the original contract qtty is getting copied in all the sales orders. To clarify with an example:
    Contract <-> wk1 <->Material 1 <-> Quanitty is 10
    I created Sales Order 1 of OR type for Qtty - 3 in reference to the contract. The original qtty displayed was 10, I changed it to 3.
    Now I go and create another sales order with reference to the same contract. The default quantity displayed in the sales order is 10 and the system is allowing me to go ahead with the delivery. I want the qtty to be displayed as 7 and system to stop delivery creation if the user tries to create an order for more than this qtty.
    Please suggest a solution.

    Hi,
    this can be easily controlled through copy controls
    go to t.code  VTAA click display to change icon
    select QC to OR click on item category and select KMN
    go to detail icon and copy qty field and select appropriate (like keep it blank) ur problem may be solved
      I think it comes when copying, some one might have changed it.
    regards,
    sadanandam kasarla

  • Creating one Sales Order from Multiple Quotes

    Hello
    We are using SAP CRM 2007.
    I believe in CRM we can create one sales order from multiple quotes. We have a requirement where we need to create one Third party sales order from multiple Quotations.
    I have Item cat for Quotations and Sales Document maintained correctly.
    I also have copy control where ZQUO and ZSAL are maintained correctly. Where I have maintained settings for copying Transactions as well as Item Category.
    But when I go to CRMD_ORDER and retrieve quotes and try to do a follow on doc for sales doc , only the first Quote gets added into follow on document.
    Can someone tell me if I am missing any config?
    Thanks

    hello,
    in sap ui we use control button and select multiple quotes and then
    create the sales order as follow up as we have follow up button.
    Regards,
    Deepa

  • Is there a way to create a Quote or Sales Order from a a Service Call?

    Hi Forum,
    Is there a way to automatically create a Quote or Sales Order from a a Service Call?
    Regards,
    Manuel Roman

    Hi Manuel Roman,
    Service Call is mainly used for after sale support. If you want to have Sales Quote or Order created automatically, you need Sales Opportunity model.
    Thanks,
    Gordon

  • Sales office and sales group are not copied from quotation to sales order

    Hi All,
    I have maintained sales office and sales group in quotation maually at header level.while  coping to sales order sales office and sales group are missing.
    Please let me know what would be reason for missing those twoand whether i should check anything in copy controls.
    Regards
    Mohan

    As its a standard functionality to have the Sales Group & Sales Office from Quotation to Order. But in your case, check the Copy Control settings at Header Level .
    DataT 051 General header data       Copying requirements 001 Header-same customer
    DataT 101 Header business data
    DataT 001 Partner header
    In case , they are also same, then check if any Logic is added in the Existing Routine.
    Best Regards,
    Ankur

  • Copy item from Quotation to sales Order

    Hello,
    How can I copy all the line items from quotation to sales order including the price, Quantity & the Sales Texts?
    Thanks
    AK

    Hi
    Maintain copy control from sales document to sales document using t-code VTAA. Select your target & source sales document type from the list & double click on the same. There you can define the copy control.
    For Text control you can use the T Code VOTXN & create your own text controls.
    I hope this will be helpful.
    Thanks & Regards,
    Bidhu

Maybe you are looking for