Copy of Layout Variants in FBL1n

Hi,
I've copied T-Code FBL1n and it's program to Custom Program. Program is working fine.
But I don't know how to copy the Layout/Display Variants.
Kindly suggest how to copy the Layout/Display Variants to my Custom Program.
Thanks in advance.
Regards,
Kumar

Thanks to ALL.. I'm able to Save Variants.. But Compare to Standard Header is missing..
Please see the Below Screen Shots:
Standard FBL1n Report :
Copy FBL1n Report:
As per the above Screen Shot that Header is missing..
Even I checked 'REUSE_ALV_COMMENTARY_WRITE' also.. it is behaving as standard.
Kindly do the needful.
Regards,
Kumar

Similar Messages

Layout Variant in FBL1N using new field

Dear gurus,
I'd like to ask for your help again, please. I've just added the field BSEG-FDGRP to the list of fields of FBL1N using transaction OBVU. When I run the report the field is correctly displayed but if I save the current layout and set it into the selection screen, the column appears is blank. And if I open the change layout window and click OK the column gets filled.
Is there another transaction that I must set new columns to FBL1N.
Thank you very much.
Fabio Purcino

HI
goto Tcode: O7R3
and enter your required field you will get it.
Table Name
    Table from which the fields in the list are displayed. Depending on the    list category, the following specifications would be appropriate:
    o   Category 1: BSEG, RF05L
    o   Category 2: RFPOS, BKPF, BSEG, BSEC, BSED
    o   Category 3: RFOPS
Note:    Each variant which displays other fields as well as the RFPOS fields   becomes a "special variant", that is the performance of the transactions for the line item display gets worse with displays which use these
special variants.

Reg. copying Layout Variants from 1 ALV pgm to another

Hi Friends,
I am currently copying an ALV program Ztest1 to ztest2 through ztest5. While doing so I want the LAYOUT variants that are available for ztest1 also to be copied to these other programs.
All I am aware is that the table LTDX stores all the layout variants for a particular program.
Could anybody provide me the right inputs on this.
Thanks in Advance.
Rgrds,
Gayathri N.

I took this approach and it worked for me:
1) Change your program so that everytime an ALV function is called it is using the original program name in the variant declaration, ensure you keep the original code commented out, you will need to put it back later. Examples:
FORM variant_init USING varname TYPE slis_vari.
    CLEAR g_variant.
   g_variant-report = g_repid.
    g_variant-report = 'ORIGINAL_PROGRAM_NAME'.
FORM f4_for_variant.
   g_variant-report = sy-repid.
    g_variant-report = ORIGINAL_PROGRAM_NAME.
    CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
FORM check_variant.
    IF NOT p_vari IS INITIAL.
     g_variant-report = sy-repid.
      g_variant-report = ORIGINAL_PROGRAM_NAME.
      g_variant-variant = p_vari.
      CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
2) Display function lt_variant_save via SE37, set a breakpoint at the first executable line:
     perform variant_save tables it_fieldcat
4) Run your program with the layout variant you wish to copy.
5) Hit Save Variant. You are now in debug mode.
6) Enter variable CS_VARIANT-REPORT in the variables 1 panel.
7) Double-click on CS_VARIANT-REPORT.
8) Hit the Change Field Content button
9) Change the value to the name of your new program, then hit Enter.
10) Hit Execute (F8). You have now saved the variant under your new program name.
11) Exit and rerun your program as necessary for as many variants as you want to copy
12) Change your program back to using sy-repid (or whatever else it was referencing) wherever you changed it in step 1.
13) The variants have now been copied and you can run your program with the new variants.

User specific default variant for FBL1n FbL5n

Friends,
I am trying to create a variant for FBL1n report layout for specific user. Now the issue is the user has to go and select his specific variant every time he executes FBL1n. Is there any way by which we can default the specific variant for specific user.
Any help is much appreciated.

Hello,
Go and change the variant selection settings in FB00. You select the relevant variant.
Regards,
Ravi

Layout variant not working

Hi ,
I have executed a report . I hide one column and saved the layout. The layout name comes on to the selection screen parameter which i have defined on the selection screen.
PARAMETERS: p_vari LIKE disvariant-variant. " ALV Variant
i have made the i_save = 'A' and is_default = 'x'. and also used other function modules reg. Variants.
but if i select the layout variant in the selection screen and execute it is not working . the hidden column also coming on the output.
But if the select the layout variant on the output of the report from the icon select layout it is working fine. the column which i have hidden is not coming. it is perfect. why it is not working when i select the variant in the selection screen.
Regards,
Rose.

Hi,
Please try this code
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
w_variant-report = sy-repid.
* Function module to show the variant of a ALV report
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant = w_variant
      i_save     = 'A'
    IMPORTING
      es_variant = w_kvariant
    EXCEPTIONS
      not_found = 2.
IF sy-subrc = 2.
    MESSAGE ID sy-msgid TYPE 'S'      NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    p_vari = w_kvariant-variant.
ENDIF.
END-OF-SELECTION.
MOVE w_variant TO w_kvariant.
    MOVE p_vari TO w_kvariant-variant.
    MOVE sy-repid TO w_kvariant-report.
*   Function module to check the variant existence
    CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
      EXPORTING
        i_save     = w_save
      CHANGING
        cs_variant = w_kvariant.
    w_variant = w_kvariant.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program          = sy-repid
      i_callback_pf_status_set    = 'SET_PF_STATUS'
      i_callback_user_command     = 'USER_COMMAND'
      i_callback_html_top_of_page = 'HTML_HEADING'
      i_grid_title                = text-t06
      i_grid_settings             = wa_grid_set
      is_layout                   = wa_layout
      it_fieldcat                 = t_fieldcat
      i_save                      = 'X'
      is_variant                  = w_variant
      is_print                    = wa_print
    TABLES
      t_outtab                    = t_header
    EXCEPTIONS
      program_error               = 1
      OTHERS                      = 2.
IF sy-subrc <> 0.
    CASE sy-subrc.
      WHEN 1. RAISE program_error.
      WHEN 2. RAISE others.
    ENDCASE.
ENDIF.
Regards
Krishna
Edited by: Krishna Gowrneni on Apr 17, 2009 5:27 PM

Layout variant is not working in background in ALV report

Hi,
I have one LAV report to send the report output through mail in foreground and backgroud.Final internal table is having 46 fileds to display the output.But here user is saving the layout variant and sending that layout variant output to mail id in excel format with zip file.Its working in foreground.But in background its not working.Even if we select the layout variant,its sending all the 46 fileds to mail.
here we have used the below FM to update the fieldcat itab.
CALL FUNCTION 'REUSE_ALV_GRID_LAYOUT_INFO_GET'
    IMPORTING
      et_fieldcat   = it_fieldcat[]
      es_variant    = v_disvariant
    EXCEPTIONS
      no_infos      = 1
      program_error = 2
      OTHERS        = 3.
In for ground NO_OUT = 'x' for non selected fields and NO_OUT = ' ' for selected fields.
But in background NO_OUT = ' ' for all the fileds, even if we select the layout variant.
Please suggest me with the solution.
Regards,
Jayaram

hi ,
Do according to this
SORT t_ekbe by belnr.
if t_ekbe[] is not initial .
      SELECT MBLNR
        BWART
        SMBLN
        ERFMG   " This is the new added field
        erfme     " This is the new added field
      INTO CORRESPONDING FIELDS OF TABLE t_mseg
    for all entries in t_ekbe
      from mseg
      where mblnr = t_ekbe-belnr
      AND   bwart = '101'.
endif.
after this
loop at t_ekbe .
loop at t_mseg where mblnr = t_ekbe-belnr .
t_ekbe-ERFMG = t_mseg-ERFMG .
t_ekbe-erfme =   t_mseg-erfme .
modify t_ekbe transporting ERFMG erfme .
clear t_mseg .
endloop.
clear t_ekbe .
endloop.
Regards
Deepak .

Unable to save the ALV layout variant and display of selection screen on F4

Hi All,
The end user wants to directly select the layout variant (SLIS_VARI). I have used the following code to display the layout variant on selection screen. But, I am unable to save the variant on ALV. Whenever I am trying to select the layout variants (by doing F4 on selection screen) its displaying "No Layout found".
Following is the code for displaying layout variant:
PARAMETERS: p_var TYPE slis_vari.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var.
PERFORM f4_variant CHANGING p_var.
FORM f4_variant CHANGING c_variant TYPE slis_vari.
DATA: ls_variant TYPE disvariant,
            l_exit     TYPE char1.
ls_variant-report = sy-repid.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant = ls_variant
      i_save     = 'A'
    IMPORTING
      e_exit     = l_exit
      es_variant = ls_variant
    EXCEPTIONS
      not_found = 2.
IF sy-subrc = 2.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    IF l_exit EQ space.
      c_variant = ls_variant-variant.
    ENDIF.
ENDIF.
ENDFORM.                    " f4_variant
and following is the code for displaying the ALV:
FORM edition_alv.
ws_variant2 = ls_variant.
* Call ALV editor in list mode
IF p_list = 'X'.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
      EXPORTING
        i_callback_program      = ws_extract1-report
        i_callback_user_command = ws_user_command
        is_layout               = ws_layout
        it_fieldcat             = wt_fieldcat
        it_sort                 = wt_sort
        i_save                  = 'A'
        is_variant              = ws_variant2
        it_events               = wt_events[]
      TABLES
        t_outtab                = wt_edition.
* Call ALV editor in grid mode
ELSE.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_callback_program      = ws_extract1-report
        i_callback_user_command = ws_user_command
        it_fieldcat             = wt_fieldcat
        it_sort                 = wt_sort
        i_save                  = 'A'
        is_variant              = ws_variant2
        it_events               = wt_events[]
      TABLES
        t_outtab                = wt_edition.
ENDIF.
ENDFORM.
I am not sure whats going wrong, but I am unable to save variants.
Please help.
Thanks,
Vishal.

The F4 will display you the existing layouts only. So you need to save the layout first & then execute the report again & check if you are getting F4 values for that field.
The Layout needs to get stored with variant.
Regards,
Mahesh

ALV layout variant missing in background job.

hi guys,
Having problem on getting the default ALV layout variant when run the job in backgorund. Please advise any correction needed in the following code.
Thanks.
*& Include           Z_MM_KBR_AGSUBCONINV_MOD2                        *
MODULE status_0100 OUTPUT.
SET PF-STATUS '100'.
SET TITLEBAR '100'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module display_data OUTPUT
      text
MODULE display_data OUTPUT.
IF sy-batch IS INITIAL. "Foreground
IF w_container IS INITIAL.
    IF cl_gui_alv_grid=>offline( ) IS INITIAL.
*Creating the container
      CREATE OBJECT w_container
        EXPORTING
          container_name              = c_container
        EXCEPTIONS
          cntl_error                  = 1
          cntl_system_error           = 2
          create_error                = 3
          lifetime_error              = 4
          lifetime_dynpro_dynpro_link = 5
          OTHERS                      = 6.
      IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDIF.
*Creating the ALV GRID
    CREATE OBJECT w_grid
      EXPORTING
        i_parent          = w_container
        i_appl_events     = c_check
      EXCEPTIONS
        error_cntl_create = 1
        error_cntl_init   = 2
        error_cntl_link   = 3
        error_dp_create   = 4
        OTHERS            = 5.
    IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    else.
     exit.
    ENDIF.
ELSE.
*Creating the ALV GRID
    CREATE OBJECT w_grid
      EXPORTING
        i_parent          = go_dock_container
        i_appl_events     = c_check
      EXCEPTIONS
        error_cntl_create = 1
        error_cntl_init   = 2
        error_cntl_link   = 3
        error_dp_create   = 4
        OTHERS            = 5.
    IF sy-subrc <> 0.
      WRITE:/ 'Error in grid'.
    ENDIF.
     CREATE OBJECT w_grid
      EXPORTING i_parent = go_dock_container.
ENDIF.
*getting the variant option
    wa_variant-report     = sy-repid.
    wa_variant-username   = sy-uname.
    wa_layout-grid_title = sy-title.
    wa_layout-cwidth_opt = c_check.
    wa_layout-zebra       = c_check.
    wa_layout-no_f4       = c_check.
    wa_layout-sel_mode    = 'D'.
*Excluding the unwanted buttons
     PERFORM exclude_toolbar_buttons.
build field catalog.
    CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
      EXPORTING
        i_buffer_active        = c_check
        i_structure_name       = c_fcat_str
        i_bypassing_buffer     = c_check
      CHANGING
        ct_fieldcat            = t_fieldcat
      EXCEPTIONS
        inconsistent_interface = 1
        program_error          = 2
        OTHERS                 = 3.
    IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
             WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    loop at t_fieldcat into w_fieldcat.
     if w_fieldcat-FIELDNAME = 'AGING1'.
      W_FIELDCAT-NO_ZERO = 'X'.
      MODIFY t_fieldcat FROM W_FIELDCAT INDEX SY-TABIX.
     ENDIF.
    endloop.
Generate sort critria
    PERFORM generate_sort.
Create object of class lcl_event_receiver.
    CREATE OBJECT w_event.
Handler for events.
   SET HANDLER w_event->handle_top_of_page       FOR w_grid.
   SET HANDLER w_event->handle_print_top_of_page FOR w_grid.
   SET HANDLER w_event->handle_print_end_of_list FOR w_grid.
    SET HANDLER w_event->handle_hotspot_click     FOR w_grid.
*Displaying the alv
   IF NOT sy-batch IS INITIAL.
     PERFORM create_snp.
   ENDIF.
t_data = i_final.
    CALL METHOD w_grid->set_table_for_first_display
      EXPORTING
        i_save                        = 'A'
        is_layout                     = wa_layout
        is_variant                    = wa_variant
      CHANGING
        it_outtab                     = t_data
        it_fieldcatalog               = t_fieldcat
      EXCEPTIONS
        invalid_parameter_combination = 1
        program_error                 = 2
        too_many_lines                = 3
        OTHERS                        = 4.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
ENDIF.
ENDMODULE.                 " display_data OUTPUT
*&      Module user_command_0100 INPUT
      text
MODULE user_command_0100 INPUT.
DATA: lt_rows TYPE lvc_t_row,
         w_rows TYPE lvc_s_row.
CASE sy-ucomm.
    WHEN c_back.
      LEAVE TO SCREEN 0.
    WHEN c_exit.
      LEAVE TO SCREEN 0.
    WHEN c_cancel.
      LEAVE TO SCREEN 0.
   WHEN 'BILDET'.
     CALL METHOD w_grid->get_selected_rows
       IMPORTING
         et_index_rows = lt_rows.
     CALL METHOD cl_gui_cfw=>flush.
     IF sy-subrc EQ 0.
       READ TABLE lt_rows INTO w_rows INDEX 1.
       READ TABLE i_vbfa INTO w_vbfa INDEX w_rows-index.
       IF sy-subrc EQ 0.
         CLEAR i_zbw_br_nf4.
         LOOP AT i_zbw_br_nf3 INTO w_zbw_br_nf3 WHERE
                     refkey = w_vbfa-v_vbeln.
           APPEND w_zbw_br_nf3 TO i_zbw_br_nf4.
         ENDLOOP.
call dialog screen and display new alv control
         CALL SCREEN 101 STARTING AT 10 5.
       ENDIF.
     ENDIF.
     WHEN 'NOTAF'.
     CALL METHOD w_grid->get_selected_rows
       IMPORTING
         et_index_rows = lt_rows.
     CALL METHOD cl_gui_cfw=>flush.
     IF sy-subrc EQ 0.
       READ TABLE lt_rows INTO w_rows INDEX 1.
       READ TABLE i_zbw_br_nf3 INTO w_zbw_br_nf3 INDEX w_rows-index.
       DATA docnum LIKE j_1bdydoc-docnum.
       docnum = w_zbw_br_nf3-docnum.
       SET PARAMETER ID 'JEF' FIELD docnum.
       CALL TRANSACTION 'J1B3N' AND SKIP FIRST SCREEN.
     ENDIF.
ENDCASE.
ENDMODULE.                 " user_command_0100 INPUT
*&      Form modify_col_name
      text
     -->P_<FCAT> text
     -->P_TEXT_H01 text
FORM modify_col_name USING pwa_fcat TYPE lvc_s_fcat
                             value(pw_text) TYPE any.
pwa_fcat-coltext   = pw_text.
pwa_fcat-scrtext_l = pw_text.
pwa_fcat-scrtext_m = pw_text.
pwa_fcat-scrtext_s = pw_text.
ENDFORM.                    " modify_col_name
      FORM display_hotspot                                          *
FORM display_hotspot USING pw_row_id    TYPE lvc_s_row
                           pw_column_id TYPE lvc_s_col.
FIELD-SYMBOLS <l_data> TYPE zbrforecast.
READ TABLE t_br_nf_acum ASSIGNING <l_data> INDEX pw_row_id-index.
CHECK sy-subrc = 0.
IF pw_column_id = ' '.
ENDIF.
ENDFORM.                    "display_hotspot
*&      Form generate_sort
      Genereate Sort criteria
FORM generate_sort.
Local variables
DATA: wal_sort TYPE lvc_s_sort,
       wl_pos   TYPE numc2.
wl_pos = 01.
sort ORDER
wal_sort-spos      = wl_pos.
wal_sort-fieldname = c_aufnr.
wal_sort-up        = c_check.
APPEND wal_sort TO t_sort.
ENDFORM.                    "generate_sort
*&      Form f4_variant
      text
     <--PW_VARI text
FORM f4_variant CHANGING pw_vari TYPE disvariant-variant.
wa_variant-report = sy-cprog.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant    = wa_variant
      i_save        = c_u
    IMPORTING
      es_variant    = wa_variant
    EXCEPTIONS
      not_found     = 1
      program_error = 2
      OTHERS        = 3.
IF sy-subrc IS INITIAL.
    pw_vari = wa_variant-variant.
ELSE.
    MESSAGE s208(00) WITH text-t04.
ENDIF.
ENDFORM.                    " f4_variant
*&      Form validate_layout
*This subroutine is to validate the layout
No parameters are passed to this subroutine
FORM validate_layout.
IF NOT p_layout IS INITIAL.
Check Layout
   wa_variant-report   = sy-repid.
   wa_variant-username = sy-uname.
   wa_variant-variant = p_layout.
   CALL FUNCTION 'LVC_VARIANT_EXISTENCE_CHECK'
     EXPORTING
       i_save     = c_u
     CHANGING
       cs_variant = wa_variant
     EXCEPTIONS
       OTHERS     = 01.
   IF NOT sy-subrc IS INITIAL.
     SET CURSOR FIELD 'P_LAYOUT'.
     MESSAGE s001(00) WITH text-t06 p_layout.
     STOP.
   ENDIF.
ELSE.
clear wa_variant.
ENDIF.
ENDFORM.                    " validate_layout
*&      Form validate_data
      text
FORM validate_data .
PERFORM validate_layout.
ENDFORM.                    " validate_data

Hi,
Before the call to method set_table_for_first_display, populate
wa_variant-report = sy-repid.
Best regards,
Prashant

Download alv report using layout variant in background

Hi All,
I want to download an Alv report using layout varaint in background job.
can any one please help me.
i.e...
I am facing a problem in downloading a text file to the Application server.
My requirement is, when the user downloads a file with the layout variant, the file should have only the columns which was selected in the variant.
Will rewards to helpfull ans
regards
Chetan

hey seshu,
I am facing a problem in downloading a text file to the Application server.
My requirement is, when the user downloads a file with the layout variant, the file should have only the columns which was selected in the variant.

DB Table for Layout Variant in ALV report

Please help me by providing the table name which will get an entry when we save Layout Variant in ALV(OO ALV grid) output.

Hi,
I have seen the table LTDX which is giving me the Variant names for a particular program. Hope this will help you.
Database table is LTDX
Database view is V_LTDX.
Regards,
Venaktesh

Layout Variant.

Hello,
This is regarding Layout variant.
In my program I have called the function module for layout variant . Its working correctly.
When the user click the change-layout from toolbar. -> then change_layout screen will come. Up to this it is ok.
My problem is -
<b>But there I am not getting the save buttom inside the change_layout screen.
I need the save button there.</b>
I am using object oriented method .
Please help me.
Thanks in advance.
LIJO JOHN.

Solved myself.

Not printing do_sum value in output while selecting layout variant

Hi experts,
I had created layout variant for selection screen . if i dont put layout variant it show proper output with do_sum value(TOTAL), but when i save screen layout variant as both default and user-specific , it gives output but the field having do_sum value in fieldcatlog is not showing do_sum vaule(TOTAL), it show all record but not there total. So please tell me what should be done to show the do_sum value(Total).
Thanks In Advance,
Ashish

Hi Anish,
Try using gs_layout-no_totline = ' '.
Thanks,
Regards
Kiran

Using Layout Variant in jobs that are scheduled to run in background

Hi Guys,
I have an issue in using the "layout variant" in running a report in the background. Here is what i do to run a report.
I select a "selection Variant" and at the bottom of the Report input screen, I choose an User- Specific "Layout Variant" which i have saved with few columns only to show in the report.
When i run this in foreground, i am able to get the report with my "Layout variant" with only my selected columns. I could also export this output and it looks fine in excel.
When i run the same report with the same "Layout Variant" in background and save it to my local desktop as an excel file, my "Layout Variant" doesn't seem to work and i am getting all the columns and fields of the reports as such.
Is this the way, the "Layout variants" will work? Whether this will not work in background jobs? Is this the way standard SAP work?
Please guide me...
Good rating points will be given for useful inputs..
Anand Viswanathan

Standard SAP functionality

Report Layout variant missing in ECC6

Hi All,
we are going for upgrade from 4.6 to ECC6. In ECC6 in most of report's report layout variant are missing in ECC6.But our client want same variant in ECC6 as in 4.6.
Please sugest how to over come this issue.
Thanks
Mohit Khandelwal

Mohit,
I think you can try out this...
Include the variant in a transport request and give the transport req no to the basis guy; and inform him to import the same req no into ECC6 version.
He can export the transport req no from 4.6 to windows desktop and then he can import the same into ECC 6 system.
I hope this will solve your issue.
- Seenu
Edited by: Sreenivasulu Nallani on Jan 25, 2010 12:24 PM

Issues in Change layout Variant of ALV grid

Hi all,
I am using a ALV gird to display the data with some table column. I am able to save/ choose the Layout variant. I choose the existing layout varaint it works fine but when I change the column fields display from selected layout then it will immidiately looks fine, but if I perform some event, it goes to the initial stage of the choosed layout varaint.
I can solve this issue if I clear the Variant from the is_variant (of set_table_for_first_display method). So if I can find the fieldcatalog for layout Variant, then it will solved very easily.
Please suggest, if you have any idea on this.
Thanks,
Sanket Sethi

I got the solution. You can find the Variant field catalog by using Function module 'LVC_VARIANT_SELECT'. You can set the dialog box based on your requirements as well. So closing this thread. Thanks..

Copy of Layout Variants in FBL1n

Similar Messages

Maybe you are looking for