Layout Variant in FBL1N using new field

Dear gurus,
I'd like to ask for your help again, please. I've just added the field BSEG-FDGRP to the list of fields of FBL1N using transaction OBVU. When I run the report the field is correctly displayed but if I save the current layout and set it into the selection screen, the column appears is blank. And if I open the change layout window and click OK the column gets filled.
Is there another transaction that I must set new columns to FBL1N.
Thank you very much.
Fabio Purcino

HI
goto Tcode: O7R3
and enter your required field you will get it.
Table Name
    Table from which the fields in the list are displayed. Depending on the    list category, the following specifications would be appropriate:
    o   Category 1: BSEG, RF05L
    o   Category 2: RFPOS, BKPF, BSEG, BSEC, BSED
    o   Category 3: RFOPS
Note:    Each variant which displays other fields as well as the RFPOS fields   becomes a "special variant", that is the performance of the transactions  for the line item display gets worse with displays which use these
special variants.

Similar Messages

  • Error while using new fields added to Web UI through AET

    Hi,
    I have added three new fields in CRM Web UI of data type 'Numerical' in component BP_ADDR in object ACCOUNT.
    But when creating a new account, when I enter a number(say 10) and then press the ENTER key, the number disappears and a zero(0) is displayed in the field.
    Now when I again key in the number, it stays and is saved.
    Can somebody tell me is there any particular reason for this or while during field generation, I have missed out some entry that needs to be maintained. Please guide me on this.
    Thanks and Regards
    Varun Taneja

    Hi Eli,
    Thanks a lot for your quick response.
    We have added  the following fields: No. of Company Owned Cars, No. of Employees and No. of Employee Owned Cars.
    These fields can also be added in some other component, not necessarily BP_ADDR but that does not make any difference.
    I have checked that the standard address fields are filled in correctly in the first round of entry itself.
    Can you please suggest in which object should we add these fields, BUPA or ACCOUNT?
    Thanks and Regards
    Varun Taneja

  • Copy of Layout Variants in FBL1n

    Hi,
    I've copied T-Code FBL1n and it's program to Custom Program. Program is working fine.
    But I don't know how to copy the Layout/Display Variants.
    Kindly suggest  how to copy the Layout/Display Variants to my Custom Program.
    Thanks in advance.
    Regards,
    Kumar

    Thanks to ALL.. I'm able to Save Variants.. But Compare to Standard Header is missing..
    Please see the Below Screen Shots:
    Standard FBL1n Report :
    Copy FBL1n Report:
    As per the above Screen Shot that Header is missing..
    Even I checked  'REUSE_ALV_COMMENTARY_WRITE' also.. it is behaving as standard.
    Kindly do the needful.
    Regards,
    Kumar

  • Problem adding a new field to existing BPS planning layout

    Hi
    I am new to BPS and planning
    I have a requirement to add a new field which has values maintained as 0 and 1 to an existing planning cube.The user wants this new field in the existing planning layout where in he can enter the values for this field as 0 or 1.I have created a new field and maintained values for this field as 0 and 1.I have added this field to the existing planning area and have created variable with fixed value with range 0 to1.I have added the same in selections in existing planning level and package as well along with other existing selection conditions.
    In additional functions of adhoc package they have made setting as set to all possible char combination.
    In this planning area all the selections are locked in planning level and package.
    Now when i execute the planning layout to enter data,my new field is grayed out,it does not allow me to enter the values.need help  with this as to how can i make this field input enabled.This is an independent characteristic.
    Thanks
    Panchan

    Hi,
    Yu need to delete the data to fill the new field again.
    Assign points if it helps
    Regards,
    Srinivas

  • New field in field catalog in output

    How can I add new field in field catalog in Output determination. I heard it can be done through a user exit. Can somebofd help with the user exit name.

    if you want to use new field in output determination - you need to modify corresponding communication structure (KOMKBV1 - header structure for V1 application - like sales orders, contracts,...)
    Then in RVCOMFZZ in one of the userexits you can populate those fields.
    After your fields are added to KOMKBV1 - you can use them in output determination.

  • NEW FIELDS FOR PRICE DETERMINATION in MM

    Hi all experts,
    we have added new field in customizing so that in the purchase order in MM we can use new fields for price determination.
    However we do not finde the exit or program  were we can set a value for these fields.
    for instance, we want to differenciate countries belonging to the EU and not. We create a yes/no field and get its value from table T005 where each country has this info. Everything seems to be ok, but our field is not populated into KOM* tables and therefore we don't go through the condition price...
    Any ideas? Thanks.

    Hi,
    You can try using  Info Record.
    Thanks,
    Venkat

  • How add new field in layout in RDF using XML report definition

    Hi, ALL
    Do you know how add new field in layout of existing report in RDF using XML report definition. If I try change anything in RDF layout, layout which defined in XML override report layout.

    hello,
    in reports 6i we have this limitation, that you can not add a field to a report unless you re-default the whole report, as we do not support positioning-information in the customization file.
    regards,
    the oracle reports team

  • Downloading ALV Report using Layout Variant

    I want to download an Alv grid report output using layout varaint to Presentation server and also wants to mail to user .
    i.e...
    I am facing a problem in downloading and in sending mail.
    My requirement is, user  will choose  layout variant
    As per Variant chosen, i have to download that alv grid output to presentation server and also to mail.
    These download and mail sending options is in selction screen
    Will rewards to helpfull ans

    Hello,
    Do like this.
    FORM DOWNLOAD_FILE TABLES P_T_LISTE STRUCTURE G_T_LISTE.
      G_R_DISP_VARIANT-REPORT = SY-REPID.
      G_R_DISP_VARIANT-VARIANT = PA_VAR.
      CALL FUNCTION 'REUSE_ALV_VARIANT_SELECT'
           EXPORTING
                I_DIALOG            = 'N'
                I_USER_SPECIFIC     = 'A'
                I_DEFAULT           = 'X'
                IT_DEFAULT_FIELDCAT = G_T_FIELDCAT
                I_LAYOUT            = G_R_LAYOUT
           IMPORTING
                ET_FIELDCAT         = G_T_FIELDCAT
                ES_LAYOUT           = G_R_LAYOUT
           CHANGING
                CS_VARIANT          = G_R_DISP_VARIANT
           EXCEPTIONS
                ERROR_MESSAGE       = 4
                OTHERS              = 4.
      LOOP AT G_T_FIELDCAT INTO G_R_FIELDCAT WHERE NO_OUT NE 'X'
                                               AND TECH IS INITIAL
                                               AND FIELDNAME NE 'ICON'.
        MOVE-CORRESPONDING G_R_FIELDCAT TO IS_FIELDCAT.
        IS_FIELDCAT-FIELDNAME = G_R_FIELDCAT-FIELDNAME.
        IS_FIELDCAT-INTTYPE   = G_R_FIELDCAT-INTTYPE.
        IS_FIELDCAT-OUTPUTLEN = G_R_FIELDCAT-OUTPUTLEN.
        IS_FIELDCAT-REF_FIELD = G_R_FIELDCAT-FIELDNAME.
        IS_FIELDCAT-REF_TABLE = G_R_FIELDCAT-REF_TABNAME.
        APPEND IS_FIELDCAT TO IT_FIELDCAT.
      ENDLOOP.
      DATA: WA_LISTE LIKE P_T_LISTE.
      CLEAR:IT_OUTTAB.
      REFRESH: IT_OUTTAB.
      LOOP AT P_T_LISTE INTO WA_LISTE.
        WA_OUTTAB-PSPID = WA_LISTE-PSPID .
        WA_OUTTAB-POSID = WA_LISTE-POSID.
        WA_OUTTAB-POST1 = WA_LISTE-POST1.
        WA_OUTTAB-STTXT_INT = WA_LISTE-STTXT_INT.
        WA_OUTTAB-STTXT_EXT = WA_LISTE-STTXT_EXT.
        APPEND WA_OUTTAB TO IT_OUTTAB.
      ENDLOOP.
    **dynamic table creation for data
      ASSIGN LT_DATA TO <FS_DATA>.
    * Create a new Table
      CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
      EXPORTING
            IT_FIELDCATALOG = IT_FIELDCAT
      IMPORTING
            EP_TABLE = <FS_DATA>
      EXCEPTIONS
          GENERATE_SUBPOOL_DIR_FULL = 1
          OTHERS                    = 2.
      IF SY-SUBRC = 0.
        ASSIGN <FS_DATA>->* TO <FS_1>.
        CREATE DATA NEW_LINE LIKE LINE OF <FS_1>.
    *** A field-symbol to access that work area
        ASSIGN NEW_LINE->*  TO <FS_2>.
    **MOVE DATA
        LOOP AT IT_OUTTAB INTO WA_OUTTAB.
          CALL FUNCTION 'CONVERSION_EXIT_ABPSN_OUTPUT'
               EXPORTING
                    INPUT  = WA_OUTTAB-PSPID
               IMPORTING
                    OUTPUT = WA_OUTTAB-PSPID.
          CALL FUNCTION 'CONVERSION_EXIT_ABPSN_OUTPUT'
               EXPORTING
                    INPUT  = WA_OUTTAB-POSID
               IMPORTING
                    OUTPUT = WA_OUTTAB-POSID.
          LOOP AT G_T_FIELDCAT INTO G_R_FIELDCAT
                              WHERE NO_OUT IS INITIAL
                                AND TECH IS INITIAL.
            ASSIGN COMPONENT G_R_FIELDCAT-FIELDNAME OF STRUCTURE
                                                    WA_OUTTAB TO <FS_5>.
            ASSIGN COMPONENT G_R_FIELDCAT-FIELDNAME OF STRUCTURE
                                                    <FS_2> TO <FS_3>.
            <FS_3> = <FS_5>.
          ENDLOOP.
          INSERT <FS_2> INTO TABLE <FS_1>.
        ENDLOOP.
      ELSE.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE.
      IF SY-SUBRC EQ 0.
        LOOP AT <FS_1> ASSIGNING <FS_2>.
          TRANSFER  <FS_2> TO P_FILE.
        ENDLOOP.
      ELSE.
        MESSAGE E041(S9) WITH P_FILE.
      ENDIF.
      CLOSE DATASET P_FILE.
    ENDFORM.                    " download_file
    * 002 vsm1kor 13.06.06 - en
    Regards,
    Vasanth

  • Adding new field in output layout in transaction ME2N

    I would like to know if it is possible to add new fields in the output layout of transaction ME2N. For example field EKPO-AFNAM (Requisitioner) that in the standard layout is not used.
    Thanks a lot
    Melih

    Dear Melih,
    We can do.add some functions.In this way SAP provided some dynamic search strategeis.you can use other wise create through variant cofiguration.
    press SHIFT+F4 will apper dynamic selection tab there you can select some search strategeis.
    Hope this can helps you
    Prem.

  • Add new field (Check number) in Txn FBL1N

    Hi SAP,
    Is there any way or configuration i need to do so that i can add new field (Check number) in vendor line item (Txn FBL1N)?
    Here the details of the field (Check number):
    Field name: CHECT
    Table name: PAYR
    Program name: SAPMFCHK
    Appreciate your help. I will give points who help me solve this problem.
    TQ
    Regards,
    Nazrul

    Hi,
    For that you Go through this below method.
    I tested this senario it is working properly.
    Go T.code  O7E4
    IMG > Financial A/cing > Accounts Receivable and Accounts Payable > Vendor Accounts > Line Items > Display Line Items > Define Line item without ALV>Choose Selection Fields
    Account type  K
    Insert Field Name whichever you want
    Save
    Next Go to the FBL1N.
    Select change layout button and select check number from
    Save the layout
    That is enough For that
    If Have any doubt regarding this feel free to ask
    May be this information is useful to you
    Regards
    Surya

  • Using Layout Variant in jobs that are scheduled to run in background

    Hi Guys,
    I have an issue in using the "layout variant" in running a report in the background. Here is what i do to run a report.
    I select a "selection Variant" and at the bottom of the Report input screen, I choose an User- Specific "Layout Variant" which i have saved with few columns only to show in the report.
    When i run this in foreground, i am able to get the report with my "Layout variant" with only my selected columns. I could also export this output and it looks fine in excel.
    When i run the same report with the same "Layout Variant" in background and save it to my local desktop as an excel file, my "Layout Variant" doesn't seem to work and i am getting all the columns and fields of the reports as such.
    Is this the way, the "Layout variants" will work? Whether this will not work in background jobs? Is this the way standard SAP work?
    Please guide me...
    Good rating points will be given for useful inputs..
    Anand Viswanathan

    Standard SAP functionality

  • Layout Set: How to add a new field in a layout Set?

    Hi ABAPPERS.
    Question:
    How can I add a new field in a layout set?
    Scenario:
    QC21 uses a global Layout Set ZQMECOA_GLOBAL.
    There's a field required in this Layout Set which is Production Date(CAUFVD-GLTRP).
    Where is the date query happening here?
    Where can I insert the SELECT statement for the new field required?
    I try to look at:
    OPEN_FORM and WRITE_FORM, it seems that date query or SELECTION of data is not happening here.
    Thanks.

    If you are adding a header field then you will extend the header structure in CRM and do the same with Item structures for Item fields. You will use EEWB or similar technique in the CRM backend to extend the header or item.
    These extended fields in the backed are available in customer_h or _i structures in the order object that can be read and modified in the Header BAdI or Item BAdi.
    If you think that this message is cryptic or not enough, then you should search for Extension Guide in this forum and read the document.

  • Adding a new field to a standard webdynpro component's layout

    Hi all,
      I need to add a new field to a standard webdynpro component's( in my case the component is ''/SAPSRM/WDC_UI_SC_DOTC_BD')  layout.How do i go about adding a new field to the standard component's lay out?
    can anyone help me with the necessary details?
    Regards,
    Abhinay.

    Check if this is useful to you (Login required)
    https://websmp105.sap-ag.de/~sapidb/011000358700001969972008E.pdf
    Rgds/Kiran

  • How to create new field groups in AA master data screen layout?

    Hello,
    We are using ECC 6.0
    We have created bunch of new fields for asset master data, but we want to make them visible only for particular asset class. So we need to customize in SPRO Asset Master Data Screen Layout, but there no specific field groups that we can customize. So how to create and add new field groups to manage them by radiobuttons Required, Optional, No or Display?

    hi,
    think, it's not possible.
    look here:
    http://help.sap.com/saphelp_47x200/helpdata/en/4f/71e05a448011d189f00000e81ddfac/frameset.htm
    "The field groups and their respective fields are defined in system tables"
    kind regards
    Andreas

  • Is there a way to add a new field to the MD15 layout

    Hello,
    I wanted to add new fields to the MD15 layout list. For example "Vendor ID and Old Material #" Is there a way to do that?
    Thanks

    Hi
    How did you add those columns!? 
    I have similar requirement.  I tried using BAdI "MD_ADD_COL_OVERVIEW"; that works only for MD04.  which enhancement or badi you have used to add columns.
    Thanks,

Maybe you are looking for