Copy part of a symbol into a new page

Hello all-
I'm trying to break down a rather large symbol. If I highlight the second half of the symbol and copy it into a new symbol on a new page, it becomes all garbled to the point it is impossible to use it.
I tried using Duplicate but don't know what it did other than it looked like it copied all the elements into the existing symbol?
So,
1. What does duplicate do and when would it be better than copy/paste?
2. How can I copy a piece of an existing symbol to create a new symbol?
BTW - The idea of copying the existing symbol and then removing the part I don't want, although sounds like the best way to do it, will not work as whenever I copy the symbol, or even try to load it into a new page, it becomes garbled as before (This is another discussion, "symbol corrupting on save?").
James

Make a comp of that segment and Export it to a New Track, or Export it to Selected track (your "master" track).
http://help.apple.com/logicpro/mac/10/#lgcpb19adfa4

Similar Messages

How do you copy, for example I work with blue prints and I want to copy a section and copy into another new page?

How do you copy, for example I work with blue prints and I want to copy a section and copy into another new page?

Forgot to add that it would be an adjustment layer with some kind of mask on it already. The mask is uncentered when copy and pasted which throws it off.
I guess the same question would go towards doing the same for an object. How to copy and paste it over to a new doc, keeping its position within the document? is this possible?

Movie 11 can not copy everything and put it into a new project in imovie 9 it works fine

movie 11 can not copy everything and put it into a new project
in imovie 9 it works fine and there i cant copy 5 different project into new project
but in imovie 11 i only can copy project with option dubler project?

AppleMan Thanks very much for the information, however I could't make it work. I followed your instructions to the letter, in fact I tried every which-way. I created a dedicated file into which I copied and pasted the project from "package contents" but it was still greyed out when I went to retrieve it. I also found that the file size was reduced to only a few Kb. Any further step-by-step instructions would be appreciated as I am obviously doing something wrong. Babowa It appears that in imovie everything has to be "finalised" before it can be used or shared elsewhere in the same way as a disk has to be to be played elsewhere. Funnily enough an MOV file I converted to Mp4 was not greyed out and I was able to import it.... an exercise I am not keen on because of resolution loss during conversion

Copy an application with plugins into a new application and change theme...

I copied an application (theme 23) with plugins into a new application and then changed the theme to theme 26. After that, all plugins (skillbuilders super lov, skillbuilders modal, and notification plugin) didn't work at all. However, when I changed the theme back to the original theme, things worked.
I have applications that use theme 26 with plugins and they all work fine. I think the problem is related to copying one application, containing plugins, into a new application. Does anyone have any idea of it?
Thanks.

Hi,
Most plugins have css,images or js files which can be placed on the server.
It might be that you have placed those files on the server in the theme directory.
If you change the theme then the plugin can not find those files any more.
Regards,
Kees Vlek
<tt>Company: http://www.orcado.nl
Blog: http://www.orcado.nl/blog/blogger/listings/69-kvlek
Twitter: http://www.twitter.com/skier66</tt>
If the question is answered please change it to answered.

Anyone using Mr Site Pro website software on their iMac, if so how di insert the copyright symbol into my home page?

I am trying to insert the copyright symbol into the home page of my website, I am using Mr Site Pro software, on windows it is 0169 but this does'nt work on the imac, can anyone help?

Or you can try option (alt or ⌥) + G to type ©.
For future reference, enable the keyboard viewer;
System Preferences > Language and Text > Input Sources tab. Top of the left column, tick (check) "Keyboard and Character Viewer", Bottom of window next to search field, tick "Show input menu in menu bar"
System Preferences > Keyboard > Keyboard tab; tick "show keyboard and character viewers in menu bar"
All the standard diacritical marks and common symbols can be accessed directly from the standard keyboard. ü is produced by pressing alt (option) + U, release them and type U. Similarly é is alt+e, followed by e.
If you open Keyboard Viewer and press the alt (option) key, the location of the marks will be revealed. Note that five of them are highlighted in orange; these are the ones which can be used with multiple letters (acute, umlaut, gràve, circumflex and tilde)
Shift+Alt will show more.
These are the results of holding down option and shift+option for a standard UK keyboard (US is similar, but a few keystrokes are reversed)
¡€#¢∞§¶•ªº–≠
⁄™‹›ﬁﬂ‡°·‚—±
œ∑´®†¥¨^øπ“‘
Œ„‰ÂÊÁËÈØ∏”’
åß∂ƒ©˙∆˚¬…æ«
ÅÍÎÏÌÓÔÒÚÆ»
`Ω≈ç√∫~µ≤≥÷
ŸÛÙÇ◊ıˆ˜¯˘¿

Can items from a list be copied and pasted into a new Pages Table?

In iWork Pages, I have a list of 50's & 60's recording artists and their songs, (which is about 40 pages long) from my '45 rpm record collection for my Jukebox.
Is there any way to copy and paste the artists' names, and their songs into a Pages Table, so that I can sort the artists' names into an alphabetical list?
If there is a way, it would save me a ton of work of typing each name into a Table one at a time.
Thank you,
Jim

Recently, I have had documents of lists that I had wanted to put into a Table afterwards, but there was no way that I could do it.... which brought me to my question to the Forum.....
I had made the artists' listing & songs of about 40 pages, about 7 years ago when I had a PC, and it was done in MS Word, and I haven't worked on it since then.
Being a veritable Newbie at the time, I had put the artists' name in one column, and the song title in another. When I had to insert a new artist and song, I would "Add Row Below" and then type the info in.
Little did I realize at the time that I had created a Table, without knowing it (I told you that I was a Newbie).
So when I started to work on those files this morning for the first time in a number of years, I wondered how could I put all the info from that Word document into a Table in Pages.
Then I could sort Ascending, instead of "Add Row Below" to squeeze the new name in when I wanted to add another artist.
Then I realized after posting the question on this Forum, that it ALREADY WAS in Table form.
I looked into the help section of Pages and found that I could sort the names in the Inspector Box in the Table Tab.
So, sorry to say I didn't discover a new technique of copying a list and then pasting the info into a new Table in one shot......
Sincerely sorry for the false alarm...
Jim

Copy messages in template folder into a new one

Hello all,
i get a new phone N97 and i need to copy the message templates i created before from the old phone into the new one
the old one belong to E-Series ( E50 )
how to do that please
using Nokia PC Suite or IR or what ?
thanks for help

Hello Impish,
if there are no blue rectangles, there are two reasons for that:
1. You have inserted a rectangular shape, not a textbox.
2. You have inserted a textbox as an inline object.
If it is the second reason - what I think it is - show the wrap inspector (the third button) while the textbox is selected and activate the second radio button at the top titled "Fixed on Page". Now you will see the blue rectangles. A double-click into it will create a new textbox with the same size of the first and containing the text that was covered by the borders of the first textbox.
You can connect/link two existing textboxes by dragging from the right bottom blue handle of one textbox to the left top blue handle of a next textbox (or vice versa).
Have in mind that every object will be inserted as an inline object when you can see the text cursor in the page, independent if the text cursor is placed inside the page text area or in a shape.
If you want to insert fix positioned objects, be sure the text cursor is not visible before insertion.
Frank.

Copy financial data and documents into a new version

Hello,
Does anybody know whether is possible to copy from one version into a new one all financial data
(including all posting levels) as well as all documents (including all posting levels).
There is a copy task where it is possible to copy financial data and documents, but the system only takes into consideration indivual values, not consolidated values.
Thanks in advance,
Rui Vieira

Hi,
It's possible with EhP2:
http://help.sap.com/erp2005_ehp_02/helpdata/en/02/056c40de05587ee10000000a155106/frameset.htm

On MacBook 10.6, in iTunes 10.3.1, music downloaded from CD, copied from Recently Added, pasted into named New Playlist Folder, is displayed there but can then disappear from this folder. What am I doing wrong?

QUESTION: On MacBook 10.6.7, in iTunes 10.3.1, music downloaded from CD, copied from Recently Added, pasted to named New Playlist Folder, is displayed as a list but can later disappear. What am I doing wrong?

Hi, Mylenium,
Thanks for your prompt reply, I'm afraid it hasn't helped. I don't see anything wrong in my device manager.
I have also gone and updated every driver, especially the motherboard chipset and the Sata Intel Rapid Storage Technology driver.
Unfortunately, this hasn't made any difference.
Any other suggestions?
Many thanks in advance!
Hugo

I am copying and pasting into a new, Pages document (from the word processing menu), and I paste in text that is longer than one page, it doesn't continue onto the next page. I can't see the end. How do I get it to show everything I paste in?

I want to copy an extensive amount of text from a web page into a Pages word processing document, but it seems to chop it up into text boxes, some of which aren't long enough to show all of the lines of text. I can't get hold of a bottom edge of the boxes to drag them to make them longer. I tried several times starting over with a new, blank page (and I made sure to choose from the Word Processing part of the dropdown menu, since I read about a similar problem that said not to use the layout menu. It keeps doing the same thing. What do I have to do to get long text pasted to multiple pages, instead of it trying to be all on one page?
In the long run, what I want is to create this as an ePub book. Is there a better way to go about this?

Hi Ellen,
Copying from web pages can include some weird formatting. Instead of Paste, use Paste and Match Style (Edit Menu).
Regards,
Ian.

Trying to copy and paste objects in keynote 6 I only get a hyperlink when pasting. Anyone else having the same problem? is there anywhere I can change it so that the copied object is pasted directly into the new slide?

Hi
I am trying to copy one object from one lside to another slide in the same presentation. The only thing I get when pasting is a hyperink. Does anyone know how I can turn this off so that the image or the object is pasted as copied to the new slide?
Thanks a lot

there are some unexpected issues when copy and pasting.
As a workaround, use duplicate slide to get the same object in another slide, (select the slide in navigator and command D or right click > duplicate)

How to copy part of a blueprint to a new project

Dear all,
we are using projects in the solution manager for testing. I want to copy a part of a blueprint structure to an existing project,
but within solar01 I can only select scenarios from the business process repository (bpr) and not from my project.
Can you please tell me how to do this?
BR, Martin

Hi Martin,
In SOLAR01 for the scenarios node, just change the source to "project" then use the "Input help":
Kind regards,
Fabricius

How do I copy multiple clips and sequences into a new project

Hi Folks,
I've spent a while on the net trying to find an answer to my problem - so far without success. I have successful finished a documentary project (on climbing Mt Kilimanjaro) and now I want to lift the most dramatic sequence (the summit) so I can advertize the thing on my website and elsewhere. I have two audio tracks and two video tracks with multiple still photos in one of the video tracks.
There must be a way to do this but I can't find it.
Any ideas - and if this is a simplistic question I apologize - I've been learning as I go on this project.
Cheers,
Paddy Ryan

Okay everyone - thanks for your help - new problem.
I successfully "built" my 4 minutes clip from the original project. But I couldn't find a way to delet the material past rthe point at which I wanted it to end. So I went in and manually deleted everything. Inow have a 4 minute clip but when I try and convert it to a Youtube friendly file format it tells me the clip is 26 minutes long. I checked it out and it just kepy playing black with no sound. I dug around alittle and founf a sort of mini-compressed timelione of all that material and deleted it. tried again. It now stops playing after 4 minutes but once again tells me the clip is 26 minutes long when I try and convert the file. Are there pixies living among the pixels?

I am getting a message that reads: "itunes Library.itl" cannot be read because it was created by a newer version of itunes. I am trying to copy my contacts and notes into my new 4s

I cannot access my itunes store due to upgrading to 10.5 so I could download my contacts and notes to my new 4s

Unless you've tried to install an older version of iTunes that message likely indicates a corrupt library file. See Empty/corrupt library after upgrade/crash...
tt2

How to copy & paste an image into a new Pages document?

With the latest version of Pages, you cannot copy & paste an image from iPhoto or the web any more.
Is there an easy alternative?
Using the toolbar alternative "Media" takes ages.
Why did Apple remove this great feature of Pages????

Apple has removed over 90 features from Pages 5.
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Pages '09 should still be in your Applications/iWork folder.
Archive/trash Pages 5 and rate/review it in the App Store, then get back to work.
Peter

Copy part of a symbol into a new page

Similar Messages

Maybe you are looking for