Copy QAS customizing after TDMS copy from Production are finished

Hi Gurus,
I need your help whit this issue. I use TDMS to create a second client in QAS with Production data but I have to manteinance a QAS customizing.
The TDMS copy was finished OK. So, the customizing is same as the production system; but I need the customizing from QAS system.
Have I import ALL transport to QAS in the new client ?? Or I can do a client copy??
How to copy the customizing QAS to the new client in the same system??
If I do a client copy with SAP_CUST profile, the documentation said that the appliction data was deleted.
     SAP_CUST
      Client-dependent Customizing, including authorization profiles, are copied. The application data is deleted and the user data is retained.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/c2/17e73a86e99c77e10000000a114084/frameset.htm
I don´t know how is the best practice for this situation...
Somebody can help me for this?
Thanks a lot.
Sergio.

Hello.
What we do here (sucessfully) is to install in QAS all transports in the queue to the production system. Of course for that you have to be sure that your queue really represents the delta between QAS and PRD.
Actually that's already how we did it before TDMS: we made full system copies, but then imported the queue back in QAS so that we would keep the customizing (and ABAP).
Regards,
Rui Dantas

Similar Messages

  • XELSYSADM account locked out repeatedly after a refresh from production

    Hello,
    We recently refreshed OIM in dev with OIM from production. I used the OIM web console to change the password for XELSYSADM in dev.
    I am observing a repeated problem of user XELSYSADM exceeding the number of allowed attempts to login and the XELSYSADM is then locked out. I used SQLDeveloper to unlock the user. However, the same problem comes back.
    What did I miss as part of the settings in DEV after the refresh from production?
    Thanks
    Khanh

    I would suggest you check the logs to see when the issue happens and it might show you some other clue to why it's happeneing.
    -Kevin

  • Stock transfer from production area to wm area

    Hi WM experts,
    I want to configure stock transfer for production area.
    I mean after completing production, initially we keep in production storage bins.  From there we move the stock to WM storage area.
    can someone give me the complete configuration steps with movements type we use to transfer stock from production area to wm area.
    Thanks in advance....
    Regards,
    YHKK

    Hi,
    You can do transfer posting from production storage location to WM storage location.This will create posting change notice which you can look in material document.
    This posting change notice can be processed in LU04 for TO creation.
    Confirm TO do complete putaway.
    Regards,
    Prashant

  • Taking free space out after TDMS copy

    Hello Experts,
    I have performed a TDMS copy from Production to one of our quality systems. Since I have taken only 6 months data the size of our quality system Database is reduced which was previously equal to Production.
    1)At present around 1 TB of space is free in PSAPSR3 tablespace whichI want to bring to OS level filesystem. I do not wantto go for whole tablespace reorg due to some specific reasons like large no of tables with Long fields, space issues etc.
      If anyone of you have faced a similarsituation pleasedo guide.
    Regards,
    Umesh

    Hello Rajesh,
    I already found tables for reorg and tried reorg for some of those tables , but the space released after table reorg is at tablespace level and not at OS file system.  So again the issue remains the same to pull out space from tablespace without reorg.
    I have searched various forums but everthing at the end comes to tablespace reorg . Since I have space contraints , I am searching for workaround for this.
    Regards,
    Umesh.

  • PPOME Organization structure gone after TDMS copy - can PFAL help recover?

    To all you HR experts,
    First off we do NOT use SAP HCM, but I believe this question relevant to this area - our installation recently wiped a development testing client clean, then copied the data back from production using the TDMS tool. Now we are at a stage where the copy is complete. I was working on some purchase order release strategy changes, and migrated them to this testing client - only to find the PPOME organizational data missing. Upon further review, I find that this data is part of HR and we don't do SAP HR. My question is whether anyone has experience with this issue and/or PFAL, and how would you recommend resolving?
    Thanks,
    Ken Little
    RJ Reynolds Tobacco

    bump

  • Copying a Customized SAP BW Webtemplates from Dev to QA

    HI All,
    is there any FM or Report which can copy a customized Webtemplates from Dev to QA?
    Thank you in advance.
    Thanks

    Thank you all for your replies.
    let me just clarify. I am not speakinmg about a report developed with a webtemplates.
    I am speaking about a customized Webtemplates we developed and assign it as a Standard Templates in the custmizing.
    I thing there should be a possiblity to copy it from dev to quality  like copying cubes.
    Thank you for your input.

  • Receiving errors trying to run adpatch after a clone from production.

    applprod@oracle-dev4#>adpatch
    exec(): 0509-036 Cannot load program /prod/prodappl/ad/11.5.0/bin/adpatchnew because of the following errors:
    rtld: 0712-001 Symbol __pth_init was referenced
    from module adpatchnew(), but a runtime definition
    of the symbol was not found.
    rtld: 0712-001 Symbol __pthread was referenced
    from module adpatchnew(), but a runtime definition
    of the symbol was not found.
    O have try executed solution in note 1237003.1. with no luck.
    The run of adrelink.sh force=y "ad" finished with status 0. I've also tried running the adadmin utility and chose to relink all products. But adpatch also fails with same error. At this point the only thing I can think of is to have a UNIX admin install AIX 6.1 on the dev server and see if the clone has issues and see if adpatch fails. Is there any other relink or script I can run or need to run to help this particular situation out? OR is cloning from an AIX 6.1 unix environment to an AIX 5.3 environment just not compatible with oracle E-Business Suites?
    Thanks in advance

    The run of adrelink.sh force=y "ad" finished with status 0. I've also tried running the adadmin utility and chose to relink all products. But adpatch also fails with same error. Have you tried to relink adpatch only and see if this helps (I understand you did for all AD executable files) -- Also, please check the adpatch timestamp to verify.
    OR is cloning from an AIX 6.1 unix environment to an AIX 5.3 environment just not compatible with oracle E-Business Suites?This is not supported -- See (FAQ: Cloning Oracle Applications Release 11i [ID 216664.1], 13. Can I clone from one operating system version to another?).
    Thanks,
    Hussein

  • Responsibilities not visible to user after cloning instance from Production

    Hi,
    In my environment, one of the user is disabled in Production, but he has access in DEV instance. When i clone production onto DEV instance and enable this user, he is not able to see the responisbilities which he is suppose to see.
    I ran the "Synchronize WF LOCAL tables', but still the user is not able to see the responsibility.
    Am i missing anything?
    Thanks,

    Hi,
    Did you try to bounce Apache and see if it helps?
    Please see the suggested solutions in the following threads/docs.
    Responsibility not appearing
    Re: Responsibility not appearing
    Assigned Responsibility Not Visible on Login through AppsLocalLogin.jsp
    Re: Assigned Responsibility Not Visible on Login through AppsLocalLogin.jsp
    Note: 388018.1 - Unable to See a Responsibility in the Navigator After End Date Has Been Removed
    Note: 727638.1 - Unable to See Responsibilities after End Date Is Removed on ATG RUP6
    Note: 406892.1 - Missing/Corrupted User-Role Responsibilities
    Note: 429852.1 - Reactivated User Does Not See Responsibilities
    Regards,
    Hussein

  • Can GATP confimed date come from production order finishing date??

    Hi Expert,
    I have one question to ask.
    in the GATP , I want to the APO system can consider the production ability , that is, when I create a sales order, the system will make  a GATP check in APO, if there is no enough stock, the system will create a PPDS planned order and return the planner order finsihed date as the schedule line confirmed date.
    I do not know this is possible or not??
    I hope some expert can help me to solve this problem
    thank you in advance!

    Hi Liu,
    Why Planned order date.. It could be Production order date (planned order release date) + inhouse production time + Transporation lead time + GR processing time (at the original location where the order is placed) ..that should determine the material availability date. CTP exactly does this. Make sure that the "replenishment lead time is switched off" in the product-location master (in fact this is location independent)- as this take precedene over everything else.
    Also ensure that that end of checking horizon is larger than the interval established above, else MAD could be much earlier. Also enure that transfer of requirements is set both at header and schudule line level for CTP to work.
    Regards,
    Loknath

  • System Number in License screen changed after system copy

    I have completed a Homogeneous system copy from GTP (Global Trade Production) to GTQ (Global Trade QAS).  After the copy the system number in the SLICENSE screen changed from the original number when I first created GTQ to the system number listed in GTP.  Now my permanent license key for GTQ will not work because the system number is different.   Is there a way to change that system number so the License key will install? 
    Thanks
    David

    No. Thats not possible.
    You need to update the info and request a new license at SAP Service Marketplace and install it on your system.
    Regards
    Juan
    Please reward with points if helpful

  • Source system changed to BI instead of R/3 after system copy

    Hi All,
    We have done system copy of R/3 and BW from production to test.
    After doing the post process the R/3 test source system in BI become as business ware house system and showing under the tree of BI.
    Due to that all data sources are not active. Could any one help me in this case.
    Thanks & Regards
    Srini

    Dear Srinivas,
    You have to restore the Source system connection in BI. There are few steps you have to do before that.
    you have to make both R/3 and BI system as modifiable and do the procedures as mentioned in the SAP Notes 1087980.
    Once these both steps were done, please right click on your source system connection in BI.
    please validate all the passwords there and it will navigate to R/3 SM59 RFC connection. There you have to check all the credentials whether it is correct or not. once it done. plz save it and get back to BI source system connection.
    Replicate the meta data and activate the data sources and transfer structures.
    After all these steps, right click once again on your source system connection and click Check.
    Here source system connection will be OK.
    Hope this would give you clear pic on your issue.
    Edited by: Mohan Kumar on Jun 25, 2009 10:52 AM

  • After Client copy - No Authroization Issue

    Dear All,
    Good Day,
    We copied Production data to Quality system through Transport management System. We checked those data copied successfully. After client copy, login in Quality also done successfully
    But unable to run any transaction. no authroization error occur for all the transaction for all the user id.
    "You are not authorized to use transaction XXXX"
    Kindly advice me to resolved this issue.
    Best Regards,
    KSK

    Was security transported down? Can you log into the system as SAP*? If so, check to make sure that all the roles and user masters where copied. You can also run st01 to do an authorization check.

  • Reports are dumping after client copy

    Hi All,
    After client refresh from Production to QA reports which are having mail options are dumping saying that Abap Dump
    "SAPSQL_ARRAY_INSERT_DUPREC"
    Error due to duplicate record entries, Dump analysis is saying. Could any one revert me back what should be done to this issue.
    When I am searching I figured it out to be Make SNRO number range settings should be done, I have no idea about SNRO number rangings, So which piece (Object) of SNRO should be modified to set this same. ?.
    awaiting for you reply.
    Regards
    sas.
    Edited by: saslove sap on Oct 25, 2011 8:34 AM

    Oops Sorry Gautham ,
    None of them is solving my Huge bug.
    below is details of the bug, if you can do any help that wwould be great, Mean while I am searching for options:
    Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
    Exception              CX_SY_OPEN_SQL_DB
    Date and Time          10/09/2011 11:18:01
    Short text
         The ABAP/4 Open SQL array insert results in duplicate database records.
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPFSSO1" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    Error analysis
         An exception occurred that is explained in detail below.
         The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
          in
         procedure "SOES_INSARR" "(FORM)", nor was it propagated by a RAISING clause.
         Since the caller of the procedure could not have anticipated that the
         exception would occur, the current program is terminated.
         The reason for the exception is:
         If you use an ABAP/4 Open SQL array insert to insert a record in
         the database and that record already exists with the same key,

  • IMAQ Copy function does not always copy Calibratio​n Informatio​n

    This only seems to happen on one PC in compiled form- works fine elsewhere. I wrote a trap to check for the existance of calibration information before the copy, and again after the copy to a newly created image. If the two disagree, the program breaks. The program breaks consistantly on one of my machines, but never on other PCs. Does anyone know what conditions can cause this to happen?

    Hello,
    Thank you for contacting National Instruments.
    I don't know of anything in particular that would cause the IMAQ Copy function to not copy the pattern matching information on one particular machine. For troubleshooting purposes, I recommend checking for any and all differences between the working machines and the non-working machine. For instance, check the versions of all software that may be used by the application (especially NI-IMAQ and IMAQ Vision). How do the systems differ in hardware? Are they all the same make/model of PC? Are they all using the same IMAQ board?
    Any differences you uncover may help us figure out what is causing this behavior. Let me know your findings so I can continue to assist you.
    Regards,
    Jesse D.
    Applications En
    gineer
    National Instruments

  • Derivation of customer group from business area.

    In CO-Profitability Analysis Sector wise Gross/Net margin analysis is being done based on the customer grp.
    But all the actual Goods issues to warranty is posted only against business area.
    We does have a mapping in Z Table for customer Grp. & Business area.
    Now we need to define a derivation rule to get customer grp for COPA from business area for warranty issues/Returns
    thanks for all
    swetha

    Hi Swetha
    KEDR is the only solution... You need to find out why your derivation rule is not working...
    In your derivation rule, please click on the magnifying lens beside KMKDGR and see which radio button is switched on... If it is 1st radio button (Do Not Overwrite....), change it to the  3rd Radio Button ..
    Also in the "Attributes" tab, check the option of "issue error msg if no value found"
    If the above does not help, ThenI would suggest to test the derivation rule...
    Select your derivation rule and Press F8... You can enter your sales order No, etc and click on "Derivation".... Once that is done, click on "Analyze derivation" and you can see the analysis
    Regards
    Ajay M

Maybe you are looking for