Copying an Image in Memory

hello,
How to copy an image from memory so that it can be restored later.
For example:
private Image buffered_image, SavedImage;
private Graphics gbuf;
buffered_image = createImage(tWidth, tHeight);
gbuf = buffered_image.getGraphics();
How?
//Want to copy buffered_image to SavedImage
later restore SavedImage to buffered_image
Thank you

If you know the two LINES of code, please post it instead of sending me a URL. thank you

Similar Messages

How can I load pattern matching images into memory?

I discovered this problem by accident when our network went down. I could not run my VI because the .png file used for pattern matching was on a network drive. My concern it the amount of time that is required to read a network file. Is there a way to load the file into memory when the VI is opened?

Brian,
Thank you for contacting National Instruments. For most pattern matching programs, the pattern file should only be read from file once and is then copy to a buffer on the local machine. If you examine your code, or an example program for pattern matching, you should see at least two IMAQ Create VI called somewhere near the front of your code. This VI basically creates a memory location and most likely will be called once for your pattern image and once for the image you are searching.
Unless you are specifically calling a File Dialog VI where you are given a dialog box to open a file or have hard coded the file path so that it is read each iteration of your code, then your pattern file should only need to be called at the beginning of your application, th
us causing only one file read over the network for that image. Therefore your program most likely already loads the image in memory once it is read and should not be accessing the network constantly.
Again, I would recommend taking a look at your code to make sure you are not causing a file access every time and then you should be ready to go. Just in case you do have the network go down, I would recommend keeping a copy of the image locally and, if you are feeling ambitious, you can programmatically have your program read the file locally if the network file returns an error.
Good luck with your application and let us know if we can be of any further assistance.
Regards,
Michael
Applications Engineer
National Instruments

Saving Images to memory

I have a PCI 1408 card. My labview program is supposed to capture images when triggered. How do i store the images to the computer memory and called it back when i need it? other then using the buffer LL ?

By default, images acquired using High Level grab, snap and sequence are already stored in system memory. There are also low level examples showing how to do image acquisition into onboard memory. As you will see in the examples, the difference is in the IMAQ Configure List.vi where you can specify the memory location for the image buffer.
To access images stored onboard, you will need to use the IMAQ Copy.vi to copy the image from the onboard memory into system memory. If not using onboard memory, you can directly access the captured images via the pink image wires.

I am using the Adobe Acrobat Reader on a mac and I followed all the directions to copy an image but when I press paste only half of the image appears or it appears as an empty square. What can I do to fix this?

I am using the Adobe Acrobat Reader on a mac and I followed all the directions to copy an image but when I press paste only half of the image appears or it appears as an empty square. What can I do to fix this?

Hello,
I would like to inform you that not all the browsers and online PDF readers support copying text from a PDF. If you have opened the PDF online, please download PDF file to your computer and then open the file in Adobe Reader.
Please share a screenshot if the issue still persists.
Regards,
Nakul

How to Copy an Image File from a Folder to another Folder

i face the problem of copying an image file from a folder to another folder by coding. i not really know which method to use so i need some reference about it. hope to get reply soon, thx :)

Try this code. Make an object of this class and call
copyTo method.
import java.io.*;
import java.net.*;
import java.util.*;
public class FileUtil
extends File {
public FileUtil(String pathname) throws
NullPointerException {
super(pathname);
public void copyTo(File dest) throws Exception {
File parent = dest.getParentFile();
parent.mkdirs();
FileInputStream in = new FileInputStream(this); //
Open the source file
FileOutputStream out = new FileOutputStream(dest); //
Open the destination file
byte[] buffer = new byte[4096]; // Create an input
buffer
int bytes_read;
while ( (bytes_read = in.read(buffer)) != -1) { //
Keep reading until the end
out.write(buffer, 0, bytes_read);
in.close(); // Close the file
out.close(); // Close the file
This is poor object-oriented design. Use derivation only when you have to override methods -- this is just
a static utility method hiding here.

How do I copy an image from one Keynote presentation to another one?

I have a previously saved presentation on Keynote in iCloud. I created it from my desktop at work. Some of the images I used for the presentation I want to use again in another presentation, onlh this time I am working off my laptop and don't have the same access to those images. Is it possible to copy/paste images from one Keynote presentation into another? I can't even seem to click on the image and save it.
Any suggestions?

Clicking and dragging does not work.
Click on the image and Copy and Paste
or
Inspector > Metrics > File Info > click on the icon of the file and drag it to your desktop
You can then drag that file back in wherever you want.
Peter

Apex 3.1 upgrade on 11g - Where do I copy the images to?

Hi Everyone,
I've just installed Oracle 11g Personal Edition on my laptop, I have successfully configured Apex 3.0 and am now trying to finish off the upgrade to 3.1
(We are unable to upgrade to 3.1.2 yet, however this is scheduled for early in the new year - until this time we must continue to use 3.1)
I have run the install/upgrade to 3.1 successfully and have enabled the network services in 11g.
However I am getting stuck on copying the images over,
the documentation it says to copy into the ORACLE_HTTPSERVER_HOME\ohs\images directory
I cant find where my ORACLE_HTTPSERVER_HOME is set - can anyone please help to point me in the right direction
I have tried to search for the folder ohs on my hard drive, but can only find a folder called ohs_images
(C:\app\oracle\product\11.1.0\db_1\oc4j\j2ee\home\default-web-app\ohs_images)
Thanks in advance for your help.
Kind Regards, Michelle

Hi Varad,
Thanks for your prompt response.
I have run the apsldiimg.sql script to update the images directory - however it still does not seem to want to work for me! :)
When I run the script in SQL*Plus I get the following results
SQL> @apxldimg.sql C:/ApexUpgrade
PL/SQL procedure successfully completed.
old 1: create directory APEX_IMAGES as '&1/apex/images'
new 1: create directory APEX_IMAGES as 'C:/ApexUpgrade/apex/images'
Directory created.
PL/SQL procedure successfully completed.
Commit complete.
timing for: Load Images
Elapsed: 00:02:35.39
Directory dropped.
SQL>
When I go to logon to Apex, either in the Admin or Workspace areas I am unable to login.
The page displays but the normal login images aren't displayed.
Thanks, Michelle

Cannot Copy RAW Images to Tiff or Jpeg while in ACR

Requesting immediate help if anyone available currently
I've been using Photoshop CS6 for several years, never a problem at all. As soon as I bought Creative Cloud, I see many issues that cannot be resolved or are recurring.
Again today as I go to copy files (images) from Adobe Camera Raw, to say a Tiff or a Jpeg, it appears to begin to copy as normal, then suddenly a box appears with all my copying
file name/numbers, and it begins to eliminate one by one "Cannot Create File", failing the entire process to copy. I have never seen this until I began using Creative Cloud about a
month ago.
Can anyone help this Saturday evening as I am trying to complete a large project of images for others who expect them soon?
Thank you and I look forward to any advice soon,
Mark Seibold, Artist-Astronomer, Portland Oregon

First I'd like to state I am fairly ignorant of Adobe Camera Raw, as I've been using Lightroom for years. I'm only replying because you seem under a close time constraint.
Are you working within PS CC? It seems that Camera Raw no longer exists independently, but rather as a plug in within PS CC. I mention this because I seem to recall at one point it could function as an independent app. I am just wondering if you were using an old version of ACR, that may have been overwritten, or started within PS CC.
That is the only help I can offer as far as ACR, and may have nothing to do with your issue.
If you must get these done very soon and can't solve ACR, I'd also suggest giving Lightroom a shot, if you've access to it, just this one time, until you get ACR running again. Open it up, Create an intial library, like 2015 or Lightroom. Import the images you'd like to copy/convert, in a way that that the originals aren't moved and copies of the RAWs, (or DNGs) are made. Then select all, in the most recent import folder, and turn around and export them in whatever form you desire. Also, Lightroom is non-destructive, so, if you'd like to try making adjustments before exporting, under the develop tab, any alterations or adjustments you might make before exporting are completely reversible.
I realize changing one's workflow, and learning a new app, may be too much effort at this point, and very possibly require too much time, but you might pick it up quickly enough to get 'er done on time.
That is all the help I can offer. Wish I knew more about ACR.

Cannot copy RAW images to Tiff or Jpeg in ACR

Requesting immediate help if anyone available currently
I've been using Photoshop CS6 for several years, never a problem at all. As soon as I bought Creative Cloud, I see many issues that cannot be resolved or are recurring.
Again today as I go to copy files (images) from Adobe Camera Raw, to say a Tiff or a Jpeg, it appears to begin to copy as normal, then suddenly a box appears with all my copying
file name/numbers, and it begins to eliminate one by one "Cannot Create File", failing the entire process to copy. I have never seen this until I began using Creative Cloud about a
month ago.
Can anyone help this Saturday evening as i am trying to complete a large project of images for others who expect them soon.?
Thank you and I look forward to any advice soon,
Mark Seibold, Artist-Astronomer, Portland Oregon

Hi Rick
Thanks for clarifying that. Yes, that term was my mistake, as I meant to write 'Save As"
Another forum respondent just replied also, and he states as so many others do, that they do not use
the Adobe Camera Raw app formerly with CS6, as they instead use Lightroom, so he apologized that he
was not familiar with ACR but that I might have an old CS6 plug-in running that may not be completely
compatible with the new Creative Cloud. I am not sure if this is the problem.
What I would find as not really likely, is that the Creative Cloud engineers would go through all the trouble
to redesign from the old CS6, then even assist us over the phone to help install it, but in oversight,
leave us without a proper update to properly run Adobe Camera Raw. I also have never really understood the advantage of Lightroom. I'm sure that many must enjoy its efficiency, as I hear wedding photographers like it for huge batch processing of adjusting many images in synchronicity all at once. I would say that I do the same with ACR accessing it through Bridge, and I like ACR's quick and simple access for simple image adjustments and then say a small batch all synchronized, then finally to "Save As" for all selected to a final output as Tiff or Jpeg.
As an astronomer that has just started learning to use Registax for night sky images, we also like the ACR adjustments and then to "Save As" eg. all Jpeg or all Tiff, to then photo-stitch large landscape and night sky panoramas with Microsoft ICE photo-stitching.
Sorry for the long description here, but I hope to relate the total idea of what I am doing for the past years. I'll even attach an example >
Thanks for your possible solution to my problem in "Saving As" in ACR,
Mark

I am trying to find out how to copy the image on my existing hard drive to my new hard drive before I install it so it will be like I didn't do anything.

I am trying to find out how to copy the image on my existing hard drive to my new hard drive before I install it so it will be like I didn't do anything. Thanks for the info. on changing it.

Format is found in the Erase Tab:
The Disk Image is found on the Restore Tab:

I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

To delete files from your external HDD, attach it to your MBP and drag the unwanted files to trash and then empty trash.
Then you select the files that you want to transfer by 'drag and drop' to the external HDD and trash the files on your MBP.
Ciao.

How can I copy an image/picture from the internet into a word document

I am trying to copy and paste an image or picture from the internet and insert it into a word document. I select and copy the image from the internet page. I then go to the word document and select past special. When I select 'paste special' it only allows text to be copied and no images or pictures. If I also try to drag the image and place it in the word document. It does not allow me to do so. Any suggestions to fix this issue?

Considering this is a MS Word issue I'd recommend reposting to that forum. You can find one at:
http://www.officeformac.com/productforums/
Regards,
Roger

How do I copy an image in LR to the clipboard?

I can't find the option to copy an image from LR's library to the clipboard - I'm sure I'm just overlooking it - can someone help?
Thanks!!

But quality is a real point here.
So you should request a slightly different feature: drag an image thumbnail from LR to Word, which in the background executes the commands
1. Render file as somewhere specified (e.g. In a dedicated export preset for application transfer).
2. Insert the resulting file into Word
3. Ditch the file use for transmission.
4. Update history of the file with this export. - maybe yiu would not be interested in this last point, but it would fit LR logic.
The correct place to request features and let oters vote on them is another forum
http://feedback.photoshop.com/photoshop_family/topics
Cornelia

CS6 AI hangs when trying to directly copy an image into CS6 PS

Hi All
Firstly thanks for taking the time to read this.
I have a few users which are all experiencing the same issue. They didn't seem to have this issue until upgrading from CS5 to CS6.
Basically AI stops responding (usually permanantly hangs and requires restarting app) for at least 30 seconds when trying to copy an image from AI into PS. The method they're using is to directly select the image from AI and then simply paste directly into PS (I know there are other methods of doing this but this is apparently the way they have always done it).
Their machines are very well spec'd
OS - Win7 64-bit
RAM - 8 to 32GB!
CPU - i7 INTEL
GPU - Standard (but compatible) and has latest drivers but disabled by PS as i suspect it's not quite grunty enough?
Win7 has been fully updated as well as all Adobe products / Drivers etc...
I have tweaked both AI & PS (including the File Handling & Clipboard setting which enables AICB) for better performance.
I think I have basically tried everything and confused as this wasn't a problem when they were using CS5?
Am not a design expert at all so would appreciate any suggestions anyone may have?
PS - have recreated their preferences too many times to remember too :-)
PPS - have also recreated their Windows account & created a brand new account to for testing but still does it.

Could be a scatch disk issue that is it may be the scratch disk they have selected is to fragmented or too full.
Could be a font issue even though there may not be a font involved.
Could be a font cache problem that is a font is not reacting to CS6 as well as it did to CS 5 and causing the font cache to bloat
Could be that you have trash the Illustrator settings Folder and the com.adobe.illustrator.plst and not just the preferences.
Possible if you have third party plug ins to be one wih a conflict.
Possiily there is a conflicting software no one is aware of isnlled on all the computers involved.
If you have some users that are not exppereiencing this problem then compare that computer(s) with the ones that are experiencing the problem.
All you need is one that is working well. Look for fonts being installed or used, scratch disk configuration, network settings,plug ins, applications installed or application used by the others not used by the one with no problem.
Perhaps you might think of things like what I mention that would i ahve not thought of.
Good luck.

Copy & Paste images to forms from the clipboard

hello,
Java Plug-in 1.6.0_33
Using JRE version 1.6.0_33-b05 Java HotSpot(TM) Client VM
Forms Applet version is 11.1.2.0
Windows 7 64bitForms has successfully done the drag&drop,save image file images to javabeans then save & retrieve it from database.
Laf project has an example of table-block copy/paste from/to the clipboard feature. You can populate a table-block with the content of the clipboard (Excel, Word,...) and also send to the clipboard with the content of a table-block.
But a how about the copy & paste images to forms?
It is posible?Any one tried this one?
Charles
Edited by: ck on Aug 12, 2012 3:09 AM

bump...

Copying an Image in Memory

Similar Messages

Maybe you are looking for