Copying from DAT with Audigy2NX (via SB optical li

Hi everybody,
as my DAT player/recorder is going to die, :'( I would like to backup all
my digital tape collections on my PC, and subsequently put all on CDs.
My Sony DAT tape has a digital optical output, and my external Sound
Blaster Audigy2 NX has a digital optical input, so I thought I could connect
the DAT tape to Audigy.
The problem is that I don't know how to extract the digital stream coming
from the DAT tape and record onto the PC (for example like WinDAC does
for audio CD track extraction).
Is it possible to digitally extract informations with Audigy optical link ?
And how ?
Thank you for any advice,
Diabolik

Nobody knows if there's a solution to this issue ? :-(Message Edited by Diabolik on 0-25-2006 0:36 PM

Similar Messages

Large size file could not copy from "Open with explorer" in SharePoint.

Hi,
I have uploaded around "120 mb" file in Document Library. I was trying to copy that file from "Open with explorer" to my local system. I am getting "disk Space error".
Should i specify any size at any where in "Central Admin".
Thanks & Regards
Poomani Sankaran

To resolve this issue, follow these steps:
1. Click Start,
click Run, type regedit,
and then click OK.
2. Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters
3. In the right pane, right-click the FileSizeLimitInBytes value,
and then click Modify.
(If
FileSizeLimitInBytes does not exist then right-click the blank space in the right pane, click New, click DWORD
Value, type FileSizeLimitInBytes,
and then click OK)
4. Click on Decimal,
and type 4294967295 and click OK. Note The
default value for the file size limit is 50000000 bytes.
5. Quit Registry Editor. Restart the computer.
CAUSE
This issue occurs because a security change that was introduced in Windows XP SP2 affects the Web Distributed Authoring
and Versioning (WebDAV) redirector. This security change makes sure that an unauthorized server cannot force a client computer into a denial of service attack. If you try to download a file that is larger than 50000000 bytes, the client computer interprets
this download as a denial of service attack. Therefore, the download process stops.
IMPORTANT
This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might
occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how
to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base
How to back up and restore the registry in Windows
http://support.microsoft.com/kb/322756

Is data dvd copied from mac with itunes 7 work with windows itunes 7

I have a new laptop pc. My itunes library is on my emac. I want to authorize the laptop and put my itunes library on both computers. If I back up my itunes library on DVD from my mac desktop can I use the DVDs to load my library onto the laptop pc. Both computers use itunes 7.
Thanks!

iTunes: Moving your iTunes Music folder
Regards,
Colin R.

Chart from data with two bex queries in crystal reports 4.0 for enterprise

Hi,
I'm fairly new to crystal reports and I have a requirement to show the data from 2 bex queries in one single cross table. is it possible ?
after getting it i should be able to create chart with that data
Eg: my table would be something like below :
               calendar day
Input     : 12      34     50     60
Output : 09     23     19     57
Input Data will be coming from one bex query
Out put data comes from another bex query
is it possible to merge the dimensions and then work on ????
any help is much appreciated

Hi Tanveer,
The only way you can add two BEx queries in a report is using a Subreport. The First BEx query goes in the Main Report and the second one goes in the Subreport.
You'll not be able to add the dimensions and measures from these two BEx queries in a Crosstab anyway. Perhaps, you could create a mock crosstab and send values (all rows) from the Main Report to the Subreport as a string however, I can see that it's going to get complex.
-Abhilash

Loging on new client copying from 0000 with SCC4 is failure(ECC6)

Hi,Expers:
Now I have a quesion: After I finished the ECC 6 Installation, I want to copy a new client.
So I log on the client: 000 with name: SAP*, and finished copying a new client :100 with tcode: SCC4.
Then I log off the SAP system and restart the SAP MMC and OS.After that, I log on the SAP client:100 with name :SAP*.
but, I can't log in the new client:100 ,system shows error messages: Name or password is in correct (repeat logon).
Have logon Name: SAP* any issues: password or the other reasons?
Have anyone the question??
Plesase help me solve the issue, Thanks in advance

Hi Lin,
After new installation we have to changed setting in instance file for use sap* user in new client.
First you import the profile.
The user name SAP* is only active if the profile parameter login/no_automatic_user_sapstar does not have the value 1.
Regards,
Anil

How to delete Master Data transferred from ECC to APO via CIF

Hi, all
I'm connecting SCM 5.1 with ECC 6.0 via CIF.
When activating Integration Model in ECC, the following error occurred;
"Location 0001 of type 1001 (BSG 592BUSGP) already exists in APO"
This is because Location 0001 was already transferred from different ECC client via CIF, and not cleared.
I'm now trying to initialise master data transferred from ECC to APO via CIF, but in vain.
I suppose I have to first delete all master data CIFed from ECC in APO, or have to execute initialisation of APO master data with ECC data in ECC.
Please tell me how to do this.
For details, please read the followings;
I connected APO client with ECC client 590.
I transferred Plant and Material Master from ECC to APO via CIF.
After that, I wanted to change ECC client from 590 to the other.
I created the other client (592) by client-copying from 590 with SAP_ALL copy profile.
I deactivated Integration Model in ECC 590, and activated the same in ECC 592.
Here, I faced the problem.
The initial data transfer failed due to the duplicate of data.
Now I'm wondering how I can initialise master data in APO and transfer initial data from ECC.
Due to testing purposes, I have to change ECC clients from one to the other this time, but I cannot initialise master data in APO and cannot tansfer initial data from different ECC client.
thanks in advance,
Hozy

Hi all,
Thank you very much indeed for lots of your replies.
Thanks to all of your advices, I'm getting to understand what to do.
Well, I'll say I have to create one more client for testing with other ECC clients or I have to rebuild the client by client-copying from 001 and implementing all transportation requests, for marking del flags to each master data and running del programme sound like tough work, and sound like odd ..
Then, I've got next issue here.
In SCM-APO, I use BI objects, and , if I have to create several clients for testing, I have to set up clients where you can use both BI objects and CIFed master data.
I suppose I have to change 'BWMANDT' in RSADMINA and make RSA1 accessable in other SCM clients and implement tests.
Also, I have to register BI System for newly created SCM clients in RSA1-SourceSystem.
Well, if you have any experiences on this kind of use, and if you have any advice on it, please give me any tips.
Particulary, I'd appreciate very much if you give me advice on which way you have chosen; creating several clients or rebuilding the one client in SCM-APO when you use both BI objects, CIFed master data and Demand Planning.
Thanks in advance.
Hozy

To/ From Dates in GL cause strange OB behavior

Hello Experts,
I have noticed that with the new feature to limit the GL with a 'To' Date the OB yields un-expected results mainly the Total balance as of the current date.
What I would expect would be the correct opening balance as of the from date with a possible field at the end that would provide a total balance in future postings.
Also when you sort by values I have noticed that it is a SQL style sorting, ie.. 1, 10, 100, 11, 12, 13... Etc, this is not that helpful for dollar totals and was hoping this might be a quick fix, it has been like this for a long time.
Best of luck,
John-Michael

Hi John, did you find the Solution ?
because I think I have a similar issue

I was just copying my data from stand by phone by using phone to phone data transfer but phone also locked with i cloud login of stand by phone what to do

i was just copying my data from stand by phone by using phone to phone data transfer but phone also locked with i cloud login of stand by phone what to do

If it's a hardware problem, then the phone will need to be replaced.
There is no magic that can fix a hardware problem.

Creating a survey in acrobat, processing on hard copy, and data compiling via Acrobat scanning

Hi there,
I am new to creating PDF forms using Acrobat Pro 9. I have been asked by my manager to sort out a way we can create a survey (for staff)and have the data input to the survey, processed and compiled ready for an analyst to create a report of the data.
Basically, this is a survey of staff by staff, anonymous and to be completed on hard copy (Printed PDF with survey template).
So, I have started to think about the best way to go about this, can I create a survey in Acrobat, print it, fill out the multiple choice questions, scan it in Adobe, and allow acrobat to gather the data?
Personally I would like to use Acrobat (as I am enjoying learning it), but is this the right tool for that job? Is there a feature that enables multiple choice surveys to be created, printed, filled out, scanned again (with answers filled in), and compiles the data?
I hope I have explained that clear enough...;-)
Kind regards
Kevin

By itself Acrobat does not "compile data".
By the way nothing compiles data from a picture. All scanners output a picture of the scanned paper (that is, an image file such as TIFF).
Acrobat can perform Optical Character Recognition (OCR) of the picture of text.
The OCR output is the characters - no format, tables, rows, columns, no text styling, etc.
So harvesting useful information can pose something of a challenge.
You may want to consider manually compiling the results.
Be well...

Copy user data from Desktop HD to external HD

This is for a customer; I fix PCs and MACs for a living. Please answer all 3 questions below if you are able.
Old PowerMAC G5 has non-working mouse (i.e new mouse in different USB connector fails too) PLUS Other problems too. It does boot to an account with no login Password. However Login password for user account with admin privleges has been forgotten by customer. Customer wants to get a new MAC to replace G5.
So my job is to copy user data ONLY from PowerMAC HD to a NEW external usb HD for later copy to a MAC to be purchased later.. My plan is to use Target Disk to access the PowerMAC G5 HD (i.e G5 never boots with this approach; we are seeing G5 as it's HD ONLY.
So we have a MAC laptop in the middle running OS 10.4 or higher (unknown at the moment) and I connect via firewire cable and Target Disk to the G5 and ALSO connect the new usb external HD. It then use Disk Utility to reformat the external usb HD to Apple OS extended. And also wipe out all permissions on the external HD.
And then I drag and drop user home directories (and subfolders) from the G5 to the external HD.
HERE IS MY QUESTION: When I try to copy the user account with admin privleges which DOES HAVE A LOGIN PASSWORD OR the admin account home directories will OS X on the MAC laptop in the middle ASK ME FOR THE CORRESPONDING ACCOUNT PASSWORD or in some other way (PLEASE SPECIFY) get in the way VS just doing the copy ??
Because customer forgot the login password AND since mouse fails on G5, I cannot use an OS X install CD to wipe out the account password by booting from OS X Install CD etc etc.
SO IF THE MAC IN THE MIDDLE ASKS FOR THE LOGIN PASSWORD I am dead, I have no way of backing up the customer's data, can only back up from the user accounts with NO login password.
(2) I am also wondering if the MAC laptop will object to copying the home directories for user accounts with NO login password.
(3) And if the MAC in the middle objects or asks for passwords PLEASE PROVIDE A WORKAROUND if you know one. Please provide step by step instructions or a link to same as my MAC knowledge is much inferior to my PC knowledge and I probably can not "fill in the blanks"
Mike

You will be asked to provide an administrator password for the computer you're working at during the copying process. The login passwords for the accounts aren't needed to copy the data, but if any account is protected by FileVault, that account's password will be needed to decrypt it.
For example, if you're on a computer which has an administrator password of '1234' and are trying to copy the home folder of an account for which the password is '5678', you'll need to provide '1234' to copy the home folder, but not '5678'. Opening that account's FileVault-protected disk image home folder will require '5678'.
Additionally, if the numeric UIDs of the accounts match, no password will be needed to perform the copy. This generally only applies to one account per computer, and is independent of account passwords.
(62724)

Upload data from excel with vba by calling a function module

Hello all,
i have a problem with the function module "ALSM_EXCEL_TO_INTERNAL_TABLE". I will call this function module with vba to load data from excel to sap with a Buttonclick. I have copied this function module and set it remotable. But i can´t call it from excel.
Can you give me some tips how can i
upload data from excel with vba by click a button.
The problem seems the function: call method cl_gui_frontend_services=>clipboard_import in the function module, because when i comment this function call the vba-call is true but no results.
How can I call the function module correct with vba?
Thanks a lot for your tips!!!!
Chris
Message was edited by:
        Christoph Kirschner

HI
Uploading data directly from Excel file format
* Upload data direct from excel.xls file to SAP
REPORT ZEXCELUPLOAD.
PARAMETERS: filename LIKE rlgrap-filename MEMORY ID M01,
            begcol TYPE i DEFAULT 1 NO-DISPLAY,
            begrow TYPE i DEFAULT 1 NO-DISPLAY,
            endcol TYPE i DEFAULT 100 NO-DISPLAY,
            endrow TYPE i DEFAULT 32000 NO-DISPLAY.
* Tick don't append header
PARAMETERS: kzheader AS CHECKBOX.
DATA: BEGIN OF intern OCCURS 0.
        INCLUDE STRUCTURE alsmex_tabline.
DATA: END OF intern.
DATA: BEGIN OF intern1 OCCURS 0.
        INCLUDE STRUCTURE alsmex_tabline.
DATA: END OF intern1.
DATA: BEGIN OF t_col OCCURS 0,
       col LIKE alsmex_tabline-col,
       size TYPE i.
DATA: END OF t_col.
DATA: zwlen TYPE i,
      zwlines TYPE i.
DATA: BEGIN OF fieldnames OCCURS 3,
        title(60),
        table(6),
        field(10),
        kz(1),
      END OF fieldnames.
* No of columns
DATA: BEGIN OF data_tab OCCURS 0,
       value_0001(50),
       value_0002(50),
       value_0003(50),
       value_0004(50),
       value_0005(50),
       value_0006(50),
       value_0007(50),
       value_0008(50),
       value_0009(50),
       value_0010(50),
       value_0011(50),
       value_0012(50),
       value_0013(50),
       value_0014(50),
       value_0015(50),
       value_0016(50),
       value_0017(50),
       value_0018(50),
       value_0019(50),
       value_0020(50),
       value_0021(50),
       value_0022(50),
       value_0023(50),
       value_0024(50),
       value_0025(50),
       value_0026(50),
       value_0027(50),
       value_0028(50),
       value_0029(50),
       value_0030(50),
       value_0031(50),
       value_0032(50),
       value_0033(50),
       value_0034(50),
       value_0035(50),
       value_0036(50),
       value_0037(50),
       value_0038(50),
       value_0039(50),
       value_0040(50),
       value_0041(50),
       value_0042(50),
       value_0043(50),
       value_0044(50),
       value_0045(50),
       value_0046(50),
       value_0047(50),
       value_0048(50),
       value_0049(50),
       value_0050(50),
       value_0051(50),
       value_0052(50),
       value_0053(50),
       value_0054(50),
       value_0055(50),
       value_0056(50),
       value_0057(50),
       value_0058(50),
       value_0059(50),
       value_0060(50),
       value_0061(50),
       value_0062(50),
       value_0063(50),
       value_0064(50),
       value_0065(50),
       value_0066(50),
       value_0067(50),
       value_0068(50),
       value_0069(50),
       value_0070(50),
       value_0071(50),
       value_0072(50),
       value_0073(50),
       value_0074(50),
       value_0075(50),
       value_0076(50),
       value_0077(50),
       value_0078(50),
       value_0079(50),
       value_0080(50),
       value_0081(50),
       value_0082(50),
       value_0083(50),
       value_0084(50),
       value_0085(50),
       value_0086(50),
       value_0087(50),
       value_0088(50),
       value_0089(50),
       value_0090(50),
       value_0091(50),
       value_0092(50),
       value_0093(50),
       value_0094(50),
       value_0095(50),
       value_0096(50),
       value_0097(50),
       value_0098(50),
       value_0099(50),
       value_0100(50).
DATA: END OF data_tab.
DATA: tind(4) TYPE n.
DATA: zwfeld(19).
FIELD-SYMBOLS: <fs1>.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR filename.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
       EXPORTING
            mask      = '*.xls'
            static    = 'X'
       CHANGING
            file_name = filename.
START-OF-SELECTION.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
       EXPORTING
            filename                = filename
            i_begin_col             = begcol
            i_begin_row             = begrow
            i_end_col               = endcol
            i_end_row               = endrow
       TABLES
            intern                  = intern
       EXCEPTIONS
            inconsistent_parameters = 1
            upload_ole              = 2
            OTHERS                  = 3.
IF sy-subrc <> 0.
    WRITE:/ 'Upload Error ', SY-SUBRC.
ENDIF.
END-OF-SELECTION.
LOOP AT intern.
    intern1 = intern.
    CLEAR intern1-row.
    APPEND intern1.
ENDLOOP.
SORT intern1 BY col.
LOOP AT intern1.
    AT NEW col.
      t_col-col = intern1-col.
      APPEND t_col.
    ENDAT.
    zwlen = strlen( intern1-value ).
    READ TABLE t_col WITH KEY col = intern1-col.
    IF sy-subrc EQ 0.
      IF zwlen > t_col-size.
        t_col-size = zwlen.
*                          Internal Table, Current Row Index
        MODIFY t_col INDEX sy-tabix.
      ENDIF.
    ENDIF.
ENDLOOP.
DESCRIBE TABLE t_col LINES zwlines.
SORT intern BY row col.
IF kzheader = 'X'.
    LOOP AT intern.
      fieldnames-title = intern-value.
      APPEND fieldnames.
      AT END OF row.
        EXIT.
      ENDAT.
    ENDLOOP.
ELSE.
    DO zwlines TIMES.
      WRITE sy-index TO fieldnames-title.
      APPEND fieldnames.
    ENDDO.
ENDIF.
SORT intern BY row col.
LOOP AT intern.
    IF kzheader = 'X'
    AND intern-row = 1.
      CONTINUE.
    ENDIF.
    tind = intern-col.
    CONCATENATE 'DATA_TAB-VALUE_' tind INTO zwfeld.
    ASSIGN (zwfeld) TO <fs1>.
    <fs1> = intern-value.
    AT END OF row.
      APPEND data_tab.
      CLEAR data_tab.
    ENDAT.
ENDLOOP.
CALL FUNCTION 'DISPLAY_BASIC_LIST'
       EXPORTING
            file_name     = filename
       TABLES
            data_tab      = data_tab
            fieldname_tab = fieldnames.
*-- End of Program
<b>Excel Upload Alternative - KCD_EXCEL_OLE_TO_INT_CONVERT</b>
*Title : Excel Uploading
TYPES:   BEGIN OF t_datatab,
         col1(25) TYPE c,
         col2(30) TYPE c,
         col3(30) TYPE c,
         col4(30) TYPE c,
         col5(30) TYPE c,
         col6(30) TYPE c,
         col7(30) TYPE c,
         col8(30) TYPE c,
         col9(30) TYPE c,
         col10(30) TYPE c,
         col11(30)    TYPE c,
       END OF t_datatab.
DATA: it_datatab TYPE STANDARD TABLE OF t_datatab INITIAL SIZE 0,
      wa_datatab TYPE t_datatab.
Data : p_table type t_datatab occurs 0 with header line.
DATA : gd_scol   TYPE i VALUE '1',
       gd_srow   TYPE i VALUE '1',
       gd_ecol   TYPE i VALUE '256',
       gd_erow   TYPE i VALUE '65536'.
DATA: it_tab TYPE filetable,
      gd_subrc TYPE i.
field-symbols : <fs>.
*Selection screen definition
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_file LIKE rlgrap-filename
               DEFAULT 'c:test.xls' OBLIGATORY.   " File Name
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
REFRESH: it_tab.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
      window_title     = 'Select File'
      default_filename = '*.xls'
      multiselection   = ' '
    CHANGING
      file_table       = it_tab
      rc               = gd_subrc.
LOOP AT it_tab INTO p_file.
*    so_fpath-sign = 'I'.
*    so_fpath-option = 'EQ'.
*    append so_fpath.
ENDLOOP.
START-OF-SELECTION.
PERFORM upload_excel_file TABLES   it_datatab
                             USING   p_file
                                     gd_scol
                                     gd_srow
                                     gd_ecol
                                     gd_erow.
* END-OF-SELECTION.
END-OF-SELECTION.
LOOP AT it_datatab INTO wa_datatab.
    WRITE:/ wa_datatab-col1,
            wa_datatab-col2,
            wa_datatab-col3,
            wa_datatab-col4,
            wa_datatab-col5,
            wa_datatab-col6,
            wa_datatab-col7,
            wa_datatab-col8,
            wa_datatab-col9,
            wa_datatab-col10,
            wa_datatab-col11.
ENDLOOP.
*&      Form UPLOAD_EXCEL_FILE
*       upload excel spreadsheet into internal table
*      -->P_TABLE    Table to return excel data into
*      -->P_FILE     file name and path
*      -->P_SCOL     start column
*      -->P_SROW     start row
*      -->P_ECOL     end column
*      -->P_EROW     end row
FORM upload_excel_file TABLES   p_table
                       USING    p_file
                                p_scol
                                p_srow
                                p_ecol
                                p_erow.
DATA : lt_intern TYPE kcde_cells OCCURS 0 WITH HEADER LINE.
* Has the following format:
*             Row number   | Colum Number   |   Value
*      i.e.     1                 1             Name1
*               2                 1             Joe
DATA : ld_index TYPE i.
* Note: Alternative function module - 'ALSM_EXCEL_TO_INTERNAL_TABLE'
CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
    EXPORTING
      filename                = p_file
      i_begin_col             = p_scol
      i_begin_row             = p_srow
      i_end_col               = p_ecol
      i_end_row               = p_erow
    TABLES
      intern                  = LT_INTERN
    EXCEPTIONS
      inconsistent_parameters = 1
      upload_ole              = 2
      OTHERS                  = 3.
IF sy-subrc <> 0.
    FORMAT COLOR COL_BACKGROUND INTENSIFIED.
    WRITE:/ 'Error Uploading file'.
    EXIT.
ENDIF.
IF lt_intern[] IS INITIAL.
    FORMAT COLOR COL_BACKGROUND INTENSIFIED.
    WRITE:/ 'No Data Uploaded'.
    EXIT.
ELSE.
    SORT lt_intern BY row col.
    LOOP AT lt_intern.
     MOVE lt_intern-col TO ld_index.
     assign component ld_index of structure
     p_table to <fs>.
move : lt_intern-value to <fs>.
*     MOVE lt_intern-value TO p_table.
      AT END OF row.
        APPEND p_table.
        CLEAR p_table.
      ENDAT.
    ENDLOOP.
ENDIF.
ENDFORM.                    "UPLOAD_EXCEL_FILE
Regards
Pavan

Retrieve data from a dynamic page via loadURL

Hello.
I would like to ask you how it is possible to retrieve data
from a dynamic page (asp classic in my case) using the loadURL
method.
I would like to create an html authentication form (with
username and password fields). The loadURL method should call an
asp page and then pass to the usual function 'DoIfSucceded' the
results of the elaboration.
Of course I'm going to have a switch in the function in order
to make different actions depending from the results of the asp
page (authentication succeded or failed).
I had a look to the examples at this page:
Adobe
samples
Is there anyone who can explain clearly how the results data
must be written by the asp page and how the success function can
retrieve them ?
I thank you in advance for your help.

loadURL() uses the the XMLHttpRequest Object so if the
content you return is XML, you have 2 choices for accessing your
data. You can either access it as a text string via the
XMLHttpRequest object's responseText property, or as a DOM document
via the XMLHttpRequest object's responseXML property:
function MySuccessCallback(req)
// If my data is XML, I can access the data that was sent
from the server
// as DOM elements via the XMLHttpRequest's responseXML
property.
var xmlDOM = req.xhRequest.responseXML;
// OR, you can access the data sent back from the server as
text via
// the XMLHttpRequest object's responseText property.
var xmlAsAString = req.xhRequest.responseText;
var req = Spry.Utils.loadURL("GET",
"/app/book.php?id=1&code=54321", true, MySuccessCallback);
If your serverside script wants to use some other format as a
response like JSON or plain text, then you can only access the data
as text via the responseText property.
--== Kin ==--

Copying directory data from one server to another

Hi friends,
I maintain two directory server (ver. 5.2) with same domain (xxx.com) and i have to copy the entire data from one server.
I tried to export from a one server and import it on another server, but it didn't get copied and it is getting object class violation error,
Please give me some tips to copy the entire data along with password encryption, so the users should be able to login to the new server.
Regards,
Iqbal

Before you copy the data, make sure the new server has all user-defned schema (objectclass, attribute) which reside on the first server. What you can do is to copy the schema over first. Then you can copy the data over.

Copy the data from first line while dynamically adding a new line in table

Hi,
1. There is a table
2. An add button adds a new line to the table using 'AddInstance'
3. A record is entered in the first line
4. When the add button is clicked it adds a new line and along with it copies the data entered in the first line
My question is how to copy the data from the first line and show it in the new line added. This is required so that user can use most of the common values in the first line.
Thanks,
Nikhil

You can use the following Java Script in the Click event of the button.
// Get the number of rows in the table
var nrows = xfa.resolveNodes("page.table.DATA[*]").length;
// Add a new instance(row) to the table
page.table.addInstance.instanceManager(1);
xfa.form.recalculate(1);
// Copy the values from the first line to the newly created row
page.table.DATA\[ nrows \].field1.rawValue = page.table.DATA\[ 0 \].field1.rawValue;
..........field2
..........field3
Thanks,
Chandra Indukuri

I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data.

I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data and it does not show on the desktop when connected.

Ok if disk utility was able to verify the drive I doubt there is any problem.. are you trying to open a TM backup??
You need to mount the sparsebundle then check the actual info inside the bundle.
Don't use disk warrior.. if the disk has verified then unless you deliberately deleted files there is nothing that is going to do.
Pondini has a lot of stuff about getting access to the sparsebundle.
http://pondini.org/TM/17.html
But if you have copied info to the TC that is now gone.. and the disk is ok.. I am not sure.. the TC will not have deleted the files itself.

Copying from DAT with Audigy2NX (via SB optical li

Similar Messages

Maybe you are looking for