Copying sub-bulleted list _and_ keeping the master format

Super basic question: how to make sub-bulleted lists formatted nicely?
It's a follow up of the above topic. When I copy paste a full slide, it loses the property that sub-lists (pressing tab) come with smaller bullets. I can of course re-apply master, but then all my changes to the text (e.g. colored or bolded text) goes back do the default font. This is really annoying, it means that I cannot copy-paste slides from one presentation to another

I have no problem with drag and drop on any of our systems.
Your installation is faulty, try Resetting Keynote perform all the steps in the correct order
remove Keynote version 6.5, you must use an application removal tool for this procedure to work: Appcleaner is free, I use Appzapper
empty the trash
Shut Down the Mac (Apple menu > Shut Down)
wait 10 seconds, then press the power button
Immediately after you hear the startup tone, hold down the Shift key, release the Shift key when you see the grey Apple screen
start up will take a few minutes longer than usual as the Mac is performing a repair routine
restart the Mac normally, (don’t hold down any keys during startup)
install Keynote from the Mac App Store

Similar Messages

Copy and paste has stopped keeping the source formatting.

Hello,
I have used Firefox for a few years but just recently I have run into this problem. I copy Twitter links and send them via email using Microsoft Outlook 2003. Within the last week or so the formatting will not stay the same as the source website as before. There are some Twitter links where the hyperlink will not even be clickable like before.
I have used Internet Explorer to see if it was a Word or Outlook problem but using IE it works correctly like before.
I have done a refresh of Firefox as well as removing it completely and reinstalling fresh. I have ruled out anything else but Firefox (I believe).

I did some more digging thru your site and found someone that reverted back to a prior version of Firefox so I gave it a try.
I went from 37.X to 36.X and my problem has gone away!
I hope Firefox can address this in the future. I enjoy your product and will continue to use it.

Airdropis converting raw files to jpegs when I transfer them to my iMac at home. how do i keep the raw format across the drop?

As Above the raw files convert to jpegs and I need to keep the raw format any ideas anyone?

Converting to DNG could happen if you were dragging and dropping images from a Finder/Explorer folder into the LR thumbnails grid, which would initiate an Import operation, where you also have Copy as DNG set as your Import method. I would expect you’d see the Import panel open every time you did this, so it’d be obvious what was occurring. Dragging and dropping new images into LR this way is my standard method of Import.
One might guess conversion to DNG could occur if you drag and drop from within LR to a folder outside of LR in Finder/Explorer so an Export operation is initiated; however, on Windows, at least, this does not occur. Sometime does occur, though, because when I tried this to make sure it didn’t work, I had LR on top, then an Explorer folder beside it and my Outlook e-mail program behind the folder. When I dragged-and-dropped the thumbnail into Explorer, I got a circle-slash cursor indicating it was a prohibited operation, but then when I switched over to Outlook to write this reply, the cursor was jumping from where it was at the top of the reply to down further in the reply area, and I had to close LR to get this to stop, so LR or the OS is doing something when dragging and dropping a LR thumbnail to outside of LR. It’s possible that on a Mac different things occur.
In any case, when you move things in LR, you should be dragging and dropping thumbnails in LR to another folder in the LR folder structure, all within LR, and by default this generates a warning message box that says things cannot be undone if you do this, although there is a Don’t Show This Again checkbox. You might want to click the Reset all Warning Dialogs button in LR Preferences, so you’ll see any message boxes like this again.

HT3775 Is the Codec listed adjacent to the file format the Codec used with that file format?

Is the Codec listed adjacent to the file format the Codec used with that file format?

Is the Codec listed adjacent to the file format the Codec used with that file format?

Why IPHOTO album will not keep the template format when share to IDVD.

Why IPHOTO album will not keep the template format when share to IDVD. Also, could be better if IPHOTO Album could access "inspector tool" with ability to change the slide duration time and apply a random "Transitions" to specific slide.

Are you sharing an album of photos or a slideshow to iDVD? If it's an album then what you get in iDVD is just a slideshow with the photos in it where you have to set the transition and slide timing unless you add music and select fit to audio.
Don't know what you mean by the template format unless you're referring to the themes in a slideshow? If you share a slideshow the ss is converted to a Quicktime movie file and that is added to the iDVD menu window. No changes are possible.
OT

I'm a new customer and I've converted only 2 PDF documents, and neither document do the images show up, nor do they keep the same format. If this is what I bought, then I want a refund too.

Is it possible to keep the same format with the images when converting.

Hi,
May i know this is happening with these 2 files only or with every files?
Would it be possible for you to send me the document?
So that i can check what is the actual issue.
Regards,
Florence

Using the tab key in a list and keeping a table format when copying and pas

when I transfer a table from a microsoft word document or PDF file to the pages document, it does not keep the table and only the data inside the table. how do I keep the table?
Also, how do I keep the numbers from indenting when I do a list. for example, if I need to indent part of the sentence for writing specifications of something, I want to use the tab key to move away from the first part of the sentence, but it moves everything and not just my marker.

Not if it decides the list is a list, it can't.
The app never "decide that a list is alist". It does what you ask it to do.
Of course, if you refuse to disable the preference which automatically treats a paragraph as a new list entry I can't help you.
If the datas are stored as a list, the bullets are not part of the datas themselves so they will not be copied.
As I already responded the "Copy" tool doesn't copy attributes.
We have to choose:
we are using lists and the bullets can't be copied
or
we are using text arranged in columns and, if we put bullets, these bullets may be copied.
It's not me which wrote:
+In Textedit, it's very easy:+
+Tab, Bullet, First Column, Tab (or Tab x2 to get everything aligned), Second Column, etc.+
To do the same thing in Pages
Bullet, Tab, First Column, Tab (or Tab x2 to get everything aligned), Second Column, etc.
It's what was displayed in my screenshot and really I don't see what is more complicated.

New HD- how do I copy orig HD and make it the master?

Hi everyone,
I just installed an internal 160GB Seagate drive into my computer which is running 10.2.8, on 12GB original hard drive.
I just placed it in there and plugged it in. Machine was shakey on startup, but it finally showed me the desktop, but no icon for the new disk on there. but luckly, It showed up in system profiler (it says I have 120GB, I know I need a ata thing, but that's fine for now)!
I got into disk utility and partitioned it into 2 parts for (graphics mainly) applications and hard drive info- 60GB. I'll use the other half for storage. Both partitions now appear on my desktop-whew.
how should I go about making the new drive- disk utilities says it's the slave- into the master? (12GB original HD vs. 60GB partition)
Should I just drag and drop files to the new partition? I DL'd that "super duper!" program, should I use that?
and after I do that, should I switch the jumpers on both hard drives to make 120GB the master?
Does it have to be the master to be the startup disk?
why does it have to be the master?
thank you. I love this forum, and I tell everyone about it.

Hi,
You need Carbon Copy Cloner.
Here is a post that I made for another user.(who had a laptop)
In X you cannot drag and drop the system like you could in preX systems.
You have to use a program like Carbon Copy Clone or Super Duper or the restore function in Disk Utility. Each has its benefits and liabilities.
My favorite is Carbon Copy Clone. Here is a post I made to another thread on this topic.
A clone is just what it says. It is an exact copy of the parent.
Unlike the mac os's prior to X, you cannot just drag and drop your system or many of it's folders to another hard drive/partition to copy them. There are invisible files and links between files that have to be maintained. No problem, you just use a program for cloning. I have used Carbon Copy Clone for years and for making a simple clone it is easy and works well.
To start with, you need another hard drive. You will need an external firewire drive to make it bootable (a combo firewire/usb is fine but just usb won't work on our macs. The newer Intel macs are usb bootable but ours just work on firewire). Once you have the external drive plug it in, turn it on and format it using Disk Utility to hfs+ journaled. If you want to split the drive in 2 or more parts you can do it now. Keep in mind that you need at least as much space on the clone as the parent takes. To split the drive later would require erasing it's contents so decide if you want to have more than one copy of your system (one for testing the other for backup or what ever). This is all done with Disk Utility.
Now that you have the destination for cloning download CCC
http://www.versiontracker.com/dyn/moreinfo/macosx/13260
(This site is also a great one for downloading share ware, updates, etc. so book mark VersionTracker.com).
First open your preferences and select Energy Saver. Set it to a couple of hours or just turn it off. You don't want to sleep during the clone process. You might also want to plug your laptop into the power supply.
Once downloaded, drag CCC to the Applications folder, start it and you will get the panel for cloning. Click the preferences and select "repair permissions before cloning and make bootable".
Close the preferences and on the main panel your source is your current hard drive. The destination is the external drive (or one of it's partitions if you decide to split the hd). Click the lock at the bottom to bring up the authentication window, enter your name, click the clone button and go watch tv or something.
When it is finished you will get a window telling you so. Don't do web surfing or Photoshop work while cloning. If you can't remember what programs are running before cloning then just restart your mac and go directly to CCC or whatever program you decide to use (some like SuperDuper also available on VersionTracker.com. Just enter "clone" in the search window).
When it is all done try booting from your clone. You hold the option key down at boot and with the firewire drive on you should get a screen with both the laptop's hard drive and your external drive as valid start drives. Select the external and it should boot. If it does not go back to your main drive, open preferences and select Startup Disk. Your clone should appear there. Select it and restart. If it still does not work then your clone is bad but in 3 years of cloning I think that this happened one time.
If you ever mess up the main laptop drive or it dies you can start your laptop off the clone, start CCC, erase the laptops messed up/or new drive and clone your backup to the laptop. Now a catastrophic failure of the system or the hard drive won't cost you any lost info and time.
I keep several clones on several drives for backup. Every few months I use dvd's to back up critical customer files but in the interim it is clones of the main drive. When major updates to the system come along and I'm going to install them it is never without making sure that I have an up to date clone to fall back on. Years ago I had a drive fail that I thought was backed up on cd's. It was an expensive lesson in backing up. Since then I have had half a dozen hard drives fail so my paranoia with multiple clones. Cloning is the easiest way to make sure everything is backed up.
Message was edited by: Carl Jerris

Why won't my hyperlink keep the paragraph format?

I am working in FM11. I have a bulleted list of my heading 2 name and numbers. When I add a cross-reference for source type Paragraphs and insert my heading 2, select my reference format for HeadingName_and_Number, it changes to a cross reference marker. I am trying to copy and paste one heading (with name and number) and select that one to quickly increment the heading until I go through the list. This works in some of my other chapters, but keeps changing from paragraphs to cross reference marker. How can I make it stay a paragraph cross reference? Thanks again for your help.

At the start of a section I have a hyperlinked list to the major sections as shown in the first image:
If my sections have changed slightly due to software upgrades and enhancements, the names have changed. In other sections in the same chapter I am able to copy and paste the first hyperlink (in this case it would be the Time Controls line). Then I paste it 4 times and double click to select the next new upgraded paragraph name. I set these with the cross-reference tool and select Source Type: Paragraphs. I choose Marker Types Heading2 and click Insert. Then immediately it goes back to marker types Cross-Ref instead of Paragraphs as shown in the second image:
Other similar groups keep the Paragraph marker type so it is fast and simple to copy + paste and select the updated heading to link. I don't understand why this set won't keep the paragraph marker type.

How do I force Pages to keep the object formatting when saving? I placed the word 'draft' in the background of a template, rotated it slightly and save the template. Though the template opens with these changes intact, the document doesn't.

I'm up to date with OS and Pages software, using an Intel iMac 2 yrs old.

You need to Capture the page so that it applies to subsequent pages, applying the master objects.
It sounds like you have just done this for the first page and the following pages are just plain.
The process is explained here in Letterhead and Followers:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=182&mforum=iworktips ntrick
Peter

How do I keep the page format from changing on my IPAD as I switch between pages

How do I keep my page format from changing on my IPAD as I switch from page to page.

Can you provide more information. Switching from page to page in what app? How if the format changing?

Trouble in finding enough master pages for the creation of books, and to keep the master pages I create

I am frustrating the the small number of master pages available to create books in Aperture; it is much smaller than in iPhoto. Is it possible to access more master pages?
I created new master pages, but I can use them only for the book into which I created them. How can I keep them for all my projects? Many thanks in advance.

My Firefox remembers history from over a year ago, and unless you are using a setting or external tool to clear it, or load huge numbers of pages/download huge numbers of files, Firefox should pretty easily remember links you've accessed in recent months.
To see what Firefox has computed as the number of URLs to remember, you can check here:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''.hist''' and pause while the list is filtered
(3) Look for '''places.history.expiration.transient_current_max_pages'''
Mine's set to 104858. I don't know how that was determined.

Why are the lines of my bulleted list flowing beyond the column boundaries?

I have created an iBook using templates and styles. Everything looks good on my Mac. When I preview on my iPad or export to iBooks, the bullets are not indented from the left margin the same amount on the screen, and the text runs beyond the right edge of my column. How do I fix this?

My situation is a little different. I have a text box on the left of the page, 1 column, and a galery on the right of the page. On the Mac, the text and gallery look fine. But, when I preview on my ipad, some of the text at the right margin of the text box is not visible. I have tried resizing the text box and it just causes some other text ( the last 1 or 2 letters) at the right margin to disappear.

How do I keep the PDF format

When I convert from a PDF file to a Word doc I loose all the document boxes and underlining. Can I change the setting so I get what is in the PDF file?

When I convert from a PDF file to a Word doc I loose all the document boxes and underlining. Can I change the setting so I get what is in the PDF file?

How do I format bullet lists in the Notes tab?

I have a transcript of the audio narration in the Notes section of my source PowerPoint slides. When I publish with Adobe Presenter, these transcripts appear in the Notes tab in the published course. However, when I publish my course, any bullet lists that I may have formatted in the Notes view in PowerPoint, do not format correctly in the published course. The text of the bullets is there, but the bullet formatting is missing.
I am using Adobe Presenter 8, PowerPoint 2007, and I'm running on Windows 7 Professional. I have tried saving my PowerPoint file in the PPTX format and in the older PPT format. Neither retains the bullet-list formatting in the published course.
Is there a trick to getting lists to format correctly in the Notes tab?
-Ray

Hello,
Can you please email us the sample of your presentation (or the entire presentation) which contains those slide notes.
We will check it on our systems and get back to you with a workaround/solution.
Please email the presentation at [email protected]
Regards,
mukul

Copying sub-bulleted list _and_ keeping the master format

Similar Messages

Maybe you are looking for