SMARTFORM: PROBLEM WITH PRINTING SAME HEADER IN PAGES FOR A NON-FINISH LIST

Guys.
Remember that the columns header won't be printed only if the lines per account continues. I mean, the column header printing depends on the number of lines that are being printed.
If at the end of a previous page the list (for example the positions that belong to this account) still continues for an account, then in the next page the column header musn't be printed, just only continue printing the rest of the positions. As you notice this case would be found in any number of pages during the rest of the report.
I'm agree with all your solutions but this only functionin some cases for the first page.
I look forward to hearing from you.
If I'm clear now, please help me!
Thanks guys!

Similar Messages

Problem with printing more than one page (ghostscript broken?)

Hello,
since one of the last package updates I have problems with printing more than one page. The print problems occurs as well with pdf files as well with printing websites. I use an actual KDE system with commercial turboprint printer driver. The first page always prints fine, but all consecutive pages are corrupted. As from a similar problem some months ago, I assume a broken ghostscript package. I tried to downgrade ghostscript to check that, but I get depency problems:
root@arch32 dieter]# ls -l /var/cache/pacman/pkg/ghostscript-*
-rw-r--r-- 1 root root 9906288 21. Mär 2010 /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
-rw-r--r-- 1 root root 11402624 8. Okt 22:44 /var/cache/pacman/pkg/ghostscript-9.00-1-i686.pkg.tar.xz
[root@arch32 dieter]# pacman -U /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
Löse Abhängigkeiten auf...
Suche nach Zwischen-Konflikten...
Fehler: Konnte den Vorgang (Kann Abhängigkeiten nicht erfüllen) nicht vorbereiten
:: libspectre: benötigt ghostscript>=9.00
[root@arch32 dieter]#
Anyone else having printing problems or a solution for my problem?
Thanks, Dieter

This may not be related but I had a problem printing a pdf today whereby the second page got corrupted. The same pdf had printed fine several months ago. I realised that (long story) for some reason I had switched drivers (HP printer) from hpijs to hpcups. I installed the printer again as a "new" printer using the hpijs driver and it printed properly this time.
So it may be that the bug causes issues with some drivers. You could try an alternative driver for the printer as temporary workaround?

Problem with printing selection of web page

Print selection function from webpage don't print correctly. If text is marked then first line of text is printed not correct (printed only lower part of line). If text is longer than one page there is similar problem at the end of first page and begining of second. The problem occurs on HP LaserJet 4015 printer, and PDF creator too. Firefox 18.0.2 and firefox 19.0 , Windows 7 64bit

Hi mrbcl1, unfortunately the answer is that Firefox has some bugs when it comes to printing selections!
Typically, where the top of the selection is cut off, it means that Firefox is applying some style rules meant to position that part of the page on screen -- even though they are irrelevant when printing a selection. There's no built-in way to get Firefox to ignore those rules. You can try a different selection (keep more stuff above) or other interventions, but it can be a waste of time in many cases.
Here are two workarounds. In both cases, the idea is to isolate the selected part of the page (hide everything else) so you can print it ''normally'', bypassing the limitations of the Print Selection feature.
(1) Use the [https://addons.mozilla.org/en-US/firefox/addon/nuke-anything-enhanced/ Nuke Anything Enhanced extension]
See: [https://support.mozilla.org/questions/927457#answer-333518 When using print selection in Firefox 12.0, it prints wherever the selection is on the page (on paper) instead of at the top of the page (of paper).]
(2) Use a bookmarklet (snippet of JavaScript saved as a button on your bookmarks toolbar) to isolate the selection for printing.
This is the technique I generally use due to force of habit. The details are in [https://support.mozilla.org/en-US/questions/943039#answer-384875 this post].

Problem with printing the correct "ical" pages.

G'day
I have only recently started using "iCal", on the cloud, having upgraded my laptops to "Lion" and my iPhone to "5", so that I have NOT experienced any of the "syncing" problems of which I have read elsewhere.
BUT, I do have an irritating problem, the solution to which, being a long-term Mac user, should be obvious.
The problem stems fronm the fact that I am located on the east coast of Australia, and my laptops know this.
The first, really daft, thing that I did was to create a whole lot of iCal entries, in iCloud, without noticing that the default timezone was "Pacific".
So, OK, I fixed that by going into my ID on iCloud and changing the timezone, and then editing every single event that I had entered at that point in time.
So, I then thought that I had beaten the beast, because I had only been printing "Weekly" calendars, which were OK.
Today, I decided to print some "daily" calendars, and the system WILL NOT PRINT THE CORRECT DATE.
My iCal entries are mainly to do with a trip that that starts on 1st August this year. I bring up iCal on the Mac, go to the print page, select 01 Aug 2012, and it prints 31 July 2012.
This happens whether I tick the "Timezone" preference in iCal on the Mac, or not.
What else should I do?
Dave the Desperate

Hi Srikanth,
In the second page you can insert a command to set it to goto page 3,and an additional event in the command (only after the end of main window).
As soon as the main window ends in the second page...u will get the third and rest of the pages.
Keep the goto next page in PAge 1 as Page2
and in Page 2 as Page 2.

Problem with printing ALV lists

Hey Guys,
I have a problem with printing ALV lists ,
I created a report with several ALV lists (not grids) on the same screen but when i attempt to print the report
it prints each alv list on a different page..so if i have 3 alv lists in the same report it will print the report on 3 pages
How can i print them all in one page?
Thanks in advance
Noha Salah.

Hey Max,
I tried setting the Layout-list_append before my block_list_append function call
And setting the is_print-NO_NEW_PAGE , it printed the 3 lists on one page the only problem i have
is that the lists are truncated and the list formats has totally been messed up..how can i restore them back
to their original format?

I had a problem with print preview of billing document.

HI all,
I had a problem with print preview of billing document which contains two output types ZR1 ZR2..
For the footer text of billing document I maintained the font size as 7,5 pts, But when i go for print preview from output type ZR1 the font size of footer text is very small and looks good for output type ZR2.
If i change the print options-->logical destination of output type ZR1 same as Output type ZR2, the footer text looks good.
I think there is some issue with logical destination in print options for the output type ZR1, how can i resolve it.

hi,
for both the output types , r u using same sapscript or smartform?
if yes then, u can control it in output options of smartform and also in sapscript , you can control through if condition.
and if differect sapscript or smartform then you should not get such problem.
you can check the sapscript or smartfrom in TNAPR table.

Problem with printing from Acrobat Reader XI

SInce I installed Acrobat Reader XI I have got problems with printing out pages. The text starts a bit down (2 cm) on the paper, resulting that the last part of the text on the page will be missing. And the missing part does not follow on page 2, it just don´t comes out!
It doesn´t matter what settings i click in on the print setting page in Acrobat Reader, it always gets the same result.
Does anyone know what can be the problem?

No files appeared in C:\Users\Pavilion\AppData\Roaming\Adobe\Adobe PDF\Settings but they did appear in Distiller.
I tried to copied them from C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Settings, but found they were already there. I copied them by adding -COPY before .joboptions in the name. Now they appeared in Printing Preferences with the -COPY added.
I tested a print from Word (using File / Print), but was not prompted for the filename or location. I checked my entire system and couldn't find the PDF file anywhere. I tried changing the Port to Desktop\*.pdf using Printer Properties, but that didn't work either.
I was able to successfully use the Acrobat menu item in Word & Excel to create a PDF but it automatically created the file on the Desktop without an option to change the filename.
After several days and hours, I gave up and installed Acrobat X on the W7 computer. I can still use Acrobat XI on the W8 computer. So be it!
Thanks anyway for your attempts to help.

Problem with print photo 13x18

hi i have a problem with print photo (13x18) size it cut in the end of photo i use hp photo creations but if choose 100%size or full screen same result please what can i do; i am disapoint to buy this printer if photo print so

Cornelia-I, I used "single/image contact sheet" and there is a Lightroom
Template for 2x2 cells. I modified this a little to make the cells smaller
to provide room for the captions and margins for hole punching and binding
the sheets.
No, I surely did not type in each caption. The captions were Title plus
Caption taken from the metadata plus a comma and # sign preceding the
filename which was a date/sequence number. I was printing four different
images on each page and 36 images total so there were nine pages of the
booklet.
I didn't try the idea of switching the Photo Info option off and back on to
the custom package because I had already created a custom preset and as soon
as I discovered that all it needed was to have a period added or removed at
the end of the line each time, it was easy to simply switch back and forth
between the two text presets which was doing the same thing you recommended.
Whole job was simple once I discovered that the problem was simply that I
needed a new version of the text string every time I printed and couldn't
simply keep using the same one over and over. The time wasted was lost
trying to figure out what was causing the lines to suddenly become truncated
when previously they had been there. Which is why I wrote it up so others
need not waste that time if they want to do this.

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

Problem with printing pdf file

hello,
lately i have problem with printing pdf file:
i click on the print button and the respod is very slow
it takes more than a minute till the print window apears.
i tryied to install version X but it's the same, the problem exist only when printing via adobe reader,
other programs i'd working much faster.
please advice,
thank you

No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.

Problem with printing some report

hi very body
we have some problems with printing some reports.
the problem is when printing a report the computer processes stoped
and i should restart the computer a gain to print the report for first time and
then in the second time i have same problem.

Maher,
You can check out the new printer driver test utility verions2.0 on OTN at:
http://otn.oracle.com/software/products/reports/files/printerdrivertest.zip
This should help you determine if it is a printer problem or whether you should look into another area.
Also, you don't mention which version of reports, what command line options your using, the computer
configuration your using whether it is a network printer or local printer connected to the machine. Support
will need this information to help determine where your problem lies.
Regards,
The Oracle Reports Team

Problem with Printing from Spool

Dear Experts,
I am facing the problem with Printing, Once i press the Print button, the spool is generated. But Instead of giving one page, It is generating the more than one page. Some times, the last page its getting is blank. I am confused how this happens.
Kindly solve my issue, this happen frequently.
Thanks & Regards,
Srinivas

Dear Siva,
Everything is ok in SPAD. This happen for few process order for COPI transaction.
Regards,
Srini

Problem with printing-- logo comes upside down

Hi ,
We have some problem with printing.
While testing the print output for billing we are experiencing some problems. Every thing in the layout looks fine in the print preview but when i take a print out in my local printer , i see the client logo comes upside down and some lines are missing .
Can some body suggest me how to correct the same.
Regards,
Sekhar.

Hi Michael,
Thanks....
We have checked the printer earlier also and seems to be fine.
Aditional info:
1) We are getting this problem while printing Billing from "VF01" transaction.
2) In this also we have two invoice numbers given by functional guy out of which in for one we are getting the problem that "lines of the first box are not printing" and for second "logo is coming inverted & lines of the first box are not printing"
Regards,
Sekhar.

When i put firefox in offline mode, and then click on pages saved in history , it can't load any pages or any images. i put cach size to 250mb but the problem is the same, it saves history for two months, but can't load pages.

when i put firefox in offline mode, and then click on pages saved in history , it can't load any pages or any images. i put cach size to 250mb but the problem is the same, it saves history for two months, but can't load pages.

Hi there,
When I inspect your site in browser tools, I'm getting 404 errors from your page:
[Error] Failed to load resource: the server responded with a status of 404 (Not Found) (jquery-2.0.3.min.map, line 0)
[Error] Failed to load resource: the server responded with a status of 404 (Not Found) (edge.4.0.0.min.map, line 0)
BarnardosIreland wrote:
I would have thought that publishing should give a complete package that doesn't need any further edits to the code and can just be directly ftp'ed to the web - is this correct?
In general, you are correct - but also your server does need to be properly configured (and those errors above lead me to think it may not be) to serve the file types that your uploading - but it could be something else entirely. Can you zip up your composition folder, upload it to your Creative Cloud files, set it to share, and then post a link here so I can download it? If you'd rather not share it publicly, can you PM me with a link to your composition files?
Thanks,
Joe

HP Officejet Pro 8600 "Problem with Printer or Ink System'

A gander at this forum suggests I am one ofa multitude of people perplexed by this issue. There is a notation beside one enquiry which says 'Problem Solved'.... well it isn't for me. My printer (typical!) is one month out of warranty. I had to replace the black cartridge and, when I did, it came up with this error prompt. I then replaced all the other cartridges. HP suggests removing the printhead and following that they say place it 'upside down on a clean sheet of paper'... NO instructions for cleaning it!! When it is replaced in the printer they suggest you 'rock the printhead left and right to make sure that the printhead fully seats in the carriage' and if THIS doesn't fix things 'try reseating the printhead up to 3 times'... This in itself is an admission of an 'issue' with this product. It doesn't sound like a very scientific engineering 'fix' to me!
A new printhead costs almost what we paid for the printer a year ago. I hate consigning anything to landfill that I can avoid... unfortunately it looks like that is where this unit belongs...

Hi @Robin_Perth,
Welcome to the HP Forums!
I am sorry to hear about you getting the problem with printer or ink system error, with your HP Officejet 8600, but I am happy to look into this for you!
I am assuming you have already been through this guide, A 'Problem with Ink System' Error Message Displays on the Control Panel or Computer During Setup.
If this guide does not resolve the issue, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
This guide, Limited Warranty for HP Ink Cartridges and Customer-Replaceable Printheads for HP Inkjet Supplies, will help you to determine if your printhead is still in warranty or not.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

SMARTFORM: PROBLEM WITH PRINTING SAME HEADER IN PAGES FOR A NON-FINISH LIST

Similar Messages

Maybe you are looking for