CORE7002: authenticated doc - forced refresh: and then HTTP2228

I see this error message in the errors log which is then followed by HTTP2228 content-length mismatch errors till that object is expired/removed from the cache.
[19/Jul/2010:02:50:18] info (15712): CORE7002: authenticated doc - forced refresh: http://host.server.com/
[19/Jul/2010:02:51:10] info (15712): CORE7002: authenticated doc - forced refresh: http://host.server.com/
[19/Jul/2010:02:51:10] warning (15712): for host 99.103.23.238 trying to GET /, finish-response reports: HTTP2228: Response content length mismatch (560 bytes with a content length of 2560)
[19/Jul/2010:02:52:17] warning (15712): for host 206.192.70.102 trying to GET /, finish-response reports: HTTP2228: Response content length mismatch (560 bytes with a content length of 2560)
[19/Jul/2010:02:52:47] warning (15709): for host 99.103.23.238 trying to GET /, finish-response reports: HTTP2228: Response content length mismatch (560 bytes with a content length of 2560)
[19/Jul/2010:02:52:53] warning (15712): for host 206.192.70.102 trying to GET /, finish-response reports: HTTP2228: Response content length mismatch (560 bytes with a content length of 2560)
[19/Jul/2010:02:52:59] warning (15712): for host 62.81.205.97 trying to GET /, finish-response reports: HTTP2228: Response content length mismatch (560 bytes with a content length of 2560)
[19/Jul/2010:02:57:35] warning (15712): for host 70.114.170.151 trying to GET /, finish-response reports: HTTP2228: Response content length mismatch (560 bytes with a content length of 2560)
[19/Jul/2010:02:58:26] warning (15712): for host 124.124.3.6 trying to GET /, finish-response reports: HTTP2228: Response content length mismatch (560 bytes with a content length of 2560)Has anyone come across this issue and if yes, is there a workaround is it a setting that can disable this?
Right now, i have a script scanning the logs for either the 'forced refresh' or the HTTP2228 entries and then remove the object in question but clearly not ideal.
Thanks
JB

Problem is solved by removing these 2 lines from iframe.html
if(navigator.appName=="Microsoft Internet Explorer")
document.location.replace("");

Similar Messages

  • I saved a PDF doc in adobe and then added text to the form. But every time I try an email it it only

    I saved a PDF doc in adobe and then added text to the form. But every time I try an email it it only sends the original form without text. Once I've changed a doc in Adobe, how can I save it so that I'm able to use it with added text and notes? Also, I'm using a new iPad.

    If you are using those apps or websites, they are likely viewing the PDF using iOS' built in PDF previewing, which will not show annotations and markup to the PDF. We have informed Apple of this issue, but do not have any insight into whether or when they will fix it.
    Regarding the qustion about importing pictures, Adobe Reader does not provide any capabilities to import pictures into a PDF. To do this, you'll need to use Acrobat, available on your desktop computer.

  • Upload a doc into SAP and then FAX it

    Hi
    I'm looking for a method of uploading a doc into SAP and then FAX it to a customer.
    What currently happens is this:
    1.  SAP creates a document, which is saved to a UNIX directory as a text file.
    2.  An external process takes this file, uses the info and creates a new file with alot  more info than SAP has.  This new file is saved to another UNIX directory.
    3.  This is where I'm stuck.  I would like SAP to upload this new text file (or files) and fax each one.
    The filename will contain a document number that SAP can then use to check customer master and obtain correct FAX number.
    Can anyone provide a few pointers?
    thanks,
    Stephen

    Hi Stephen,
    Your SAPConnect config basically sends a SAPOffice message to your fax server, so to send your unix file in the same way you need an ABAP to create a SAPoffice message.
    The steps in your program will be something like;
    Read the unix file (OPEN DATASET, TRANSFER etc)
    Format the data if necessary
    Use a function module like SO_DOCUMENT_SEND_API1 to create the message
    Provided you maintain the correct recipient parameters SAPconnect should process this to the fax server.
    An alternative is to create a spool then pass this to SAPoffice, the approach is similar but the FMs needed will be different.
    Regards,
    Nick

  • Pages (5.2) won't quit on 27" iMac with OS 10.9.2. I need to force quit and then reopen. Fortunately the document is saved. Anyone else have this issue?

    In summary I purchased a new 27" iMac with Mavrickes, OS 10.9.2. When I try to close a Pages (v5.2) document   after saving the document the application freezes and I get the spinning rainbow ball. I then need to Force Quit Pages. When the Pages application is reopened the documents pop back up, with the data saved after the Force Quit, I am able to close the document. Any suggestions?
    I deleted Pages and then reinstalled a new downloaded copy of the application and the issue persists.

    If you migrated from an older Mac, Pages '08/'09 might still be in your Applications/iWork folder.
    Peter

  • How do I tap what is sent from Firefox when I press Refresh and then Resend the info, in order to recover lost text in a forum message?

    Hi
    Here's my problem
    I wrote a text message in a forum site and pressed send.
    Then a new page is loaded saying there was an error and I should press the back button to reload the previous window.
    I know from experience if I do this I will loose all the info I just wrote. However, if I reload the curent page, the info is sent again as I get a question asking if I want to resend the info. Unfortunately the problem then reoccur.
    What I would like to do is to catch the info that is resent, i.e. my written text, so I can start all over and reuse it. The info is somewhere there inside the firefox cache, history or whatever.
    How can I extract it?
    Firefox version 19.0.2 on windows 7
    Any help is highly appreciated!
    Thank you, Thomas

    Yiihaaa!!!
    Found a program named Fiddler2 that captured the network traffic on my computer in a nice way. Reloading the page and resending the data popped it up in fiddler, and using the built in textwizard function brought me the text back exactly like I wrote it, with swedish special characters and all.
    Fiddler2, what a great program! :) :) :)

  • I keep getting a forced shutdown and then my mac sends a panic report

    my Macbook pro has the lion OS.  I have Kaspersky internet security.  My mac book pro started acting slow a couple of months ago.  Thats why I loaded the Kaspersky to it.  It keeps doing a forced shutdown when I am online.  I can be just reading news on Yahoo and go to shut down Safari and a screen comes down like someone was pulling a curtain down over the viewing screen.  It tells me to hold the power button down until the computer shuts down. I can't do anything else until I shut it down. everything freezes up. When I power back up,  it says that a kext releasing a surface root has corrupted the registry. 
    This only seems to happen when I am online.
    What can I do to make this stop? I have contacted apple 3 times on this and they have tried to help by deleting files and emptying trash and it still continues.  Ofcorse, it doesn't happen when I am on the phone with the Apple Tech.  Just like my old car. Lol!

    I want to give an update on my issue. 
    I deleted my internet security from my Mac Pro and it started acting normal again.  It seems that it was the Kaspersky internet security that was causing the problem.  After contacting Kaspersky, The agent told me that they were having issues with their older software and he had me download the newest updated security.  I'm not quite sure about their answer because updates were installed on a regular basis.     Anyway,  I will see if this works any better and if not,  I won't hesitate to delete the software from my computer.  I hope that this will help someone elce.  "Thank You Melophage for your help."  

  • Nologging for a force refresh MV

    Hi ,
    I am using Oracle 10G
    I have created a complex Mv , thus the need for a force refresh and i intend to put this mv into a refresh group
    how can i actually get Oracle to truncate the data during the force refresh and
    to insert w/o logging ?
    i have tried to hide the complext view that uses analytic function into another view but still it complain of it being a complex query
    pls advise
    tks & rgds

    MVs are powerful but aren't as customizable as we would sometimes like. l they function as they will and sometimes variants like the ones you need are difficult to implement if possible at all.
    On our project we wanted to use a MV that needed to be completely refreshed daily using SYSDATE to swap effectivity dates in and out but kept current through the day too. SYSDATE prevented the possiblity of a fast refresh. We ended up creating 2 tables of our own (to use one while the other was being refreshed) to implment the functionlity we wanted. You could consider doing something similar.
    I hope someone else can give you a more encouraging answer.
    Good luck!

  • Safari crashed and then reset

    I was on yousendit.com when safari froze i forced quit and then went back to it. Safari stated the keychain popped up and said the password was not the same did i want to reset to default. I click cancel I went into sys prefs to sset a master password in the vault and reset. when I checked my safari reset and everything on my desktop dissapeared anyone have this problem?

    exact same problem, every time it crashes it reboots.
    i've lost my bookmarks twice, unfortunately when i archived the bookmarks.plist last time i left it in the library folder.
    so when safari reset it got deleted.
    I am not a happy bunny.
    my system is screwed.

  • Skype launches on start up and then hangs

    and Force Quit doesnt work. First - how do I get it to Force Quit and then how do I get Skype to stop launching on start up - or can I interupt the Skype start up somehow before it hangs. Skype upgraded itself yesterday and something clearly went wrong.
    Thanks

    when you right click on the icon and force quit there doesn't work give "Commandoptionesc" a try, usually works better with that
    and if that doesn't work you'll have to use activity monitor
    about it hanging i don't know how to fix it you should ask the people over at skype
    to get it to stop auto launching when you start up go to
    system preferences --> Accounts--> (your account) --> login items-->find skype---> highlight it--> hit the '-' button
    Hope this helps

  • Safari 6.1 freezes and then can't connect to the server when I refresh the page

    Hi everyone.
    I have a Mid 2010 13" Macbook. It is running the following..
    Processor: 2.4 GHz Intel Core 2 Duo
    Memory: 4GB 1067 MHz DDR3
    Graphics NVIDIA GeForce 320M 256 MB
    Software OS X 10.8.5 (12F45)
    Hard Drive: 320GB
    Recently Safari has been acting up. Everything will be working fine but then it will freeze and when I switch to another tab that tab will be white, as will all other tabs when I switch to them. When I refresh the page it force refreshes all other pages but on a lot of the pages (Facebook, Twitter, google, Gmail, mostly things with a password I think) it says that it can't make a secure connection to the server. I tried switching to Chrome and the same thing happened and then I switched to the Guest User and the same thing happened.
    It has also been telling me that I have no more space on the startup disk but I'm not sure how that can be the case. I currently have 272GB free of a 319GB hard drive so I'm not sure what the problem is here! When I restart the mac everything is fine again but I have noticed it is taking longer for the mac to start up now. I have repaired disk permissions, I have reset Safari and cleared the history. I have downloaded OmniDiskSweeper and it has told me that the highest usage is in Spotify caches and my Gmail folder. So I deleted the Spotify caches and deleted all my emails. I then tried to delete the mail folder in Finder but when I do it just builds itself back up again.
    When I used Disk Utility to verify the disk it found no issues.
    I tried to shut down and restart it to run the hardware test but it doesn't boot up, it just takes a lot longer to reach the log in screen.
    I don't know what else to try! Any help would be welcomed.

    Try this DNS server ..
    Open System Preferences > Network > Advanced > DNS
    Click + and type:
    208.67.222.222
    Click + again and do the same.
    208.67.220.220
    Click OK.
    Quit and relaunch Safari to test.

  • Insert and then show the result and refresh page problem

    hi all,
    I collect the form value and put them into db, and then display this student 's inform out from db including the one we just submit, first I do it on this way
      insertpayment(UserId, FeeType, DuteDate, OfficerReason, OtherReason, CompleteDate,
                            InterviewDate, ApprovalDate,PaymentYear);
                   studentRecords= getFound(UserId);
                     userSession.setAttribute("studentRecords", studentRecords);
                     RequestDispatcher disp;
                   // disp = getServletContext().getRequestDispatcher("/WEB-INF/jsp/   studentRecords= getFound(UserId);");
                     disp = getServletContext().getRequestDispatcher("/showPayment");
                    disp.forward(req, res); then whenever I refresh my showRecords.jsp" I call the insert function. THAT IS HORRIABLE.
    I try to move the studentRecords= getFound(UserId); to my showPayment servlet and then forward the result to showRecords.jsp, but I alwarys get error
    PWC4011: Unable to set request character encoding to UTF-8 from context /report, because request parameters have already been read, or ServletRequest.getReader() has already been called
    How should I handle this kind of problem??

    Karan, thank you for the link, i read a few articles, I only get the sample part part use res.sendRedirect("/myfolder/showPayment"); in my insert servlet and use forward to display the page
    userSession.setAttribute("studentRecords", studentRecords);
                  RequestDispatcher disp;
                  disp = getServletContext().getRequestDispatcher("/WEB-INF/jsp/secure/admin/showRecords.jsp");
                   disp.forward(req, res);   
    this solute the refresh page problem, but bring the new problem I can't use the following way to disable the back button. not the perter solution
    maybe I did not understand PRC more advice!!
    response.setHeader("Cache-Control","no-cache"); //Forces caches to obtain a new copy of the page from the origin server
    response.setHeader("Cache-Control","no-store"); //Directs caches not to store the page under any circumstance
    response.setDateHeader("Expires", 0); //Causes the proxy cache to see the page as "stale"
    response.setHeader("Pragma","no-cache"); //HTTP 1.0 backward compatibility

  • FCP hangs on launch and then won't force quit

    I am having trouble launching FCP.
    it will hang about at the point that it is llooking for the deck. I try to force quit and it hangs up there too.
    I did manage to get it to come up once but I noticed in thhe capture settings that the Apple Firewire setting was (missing). I have also been getting the "You must restart hold down the power button" message alot lately.

    Here is my suggestion
    1. Update Mac Pro EFI Firmware. http://www.apple.com/support/downloads/macbookproefifirmwareupdate12.html
    2. Reset PRAM via the following process:
    Shut down your Mac Pro , then start it back up while immediately holding the following keys: Command, Option, P and R.
    Hold the keys down until the computer restarts and you hear the startup sound for the third time.
    3. Erase FCP preferences files. http://docs.info.apple.com/article.html?artnum=93832
    4. unplug all GRAID. Basically FireWire VTR and Storage need separate bus, so you needs a PCIe FW card.
    Usually you can hook up both FW storage and VTR on the same FireWire bus; it is not stable, but at least you can captuer or control the deck.
    5. update CalDigit's FASTA-4e driver to 2.0.3 http://www.caldigit.com/support.asp
    6. are you using apple original memory?
    We are using Apple original RAM 8Gigs, CalDigit FASTA-4e card, CalDigit S2VR Duo 1.5TB, FCP 5.1.2, OS 10.4.8, been running a while, no problem at all.
    If you still have this problem, you can try to disconnect all external devices and memory one by one to point which component causing that issue.
    Power G5 Quad and Intel Mac Pro   Mac OS X (10.4.3)  

  • When booting up, the bluetooth connects and then disconnects with my trackpad 3 or 4 times then i get a gray cover over the desktop that drops from top to bottom then a window that tells me to use the power button to do a forced shutdown.

    when booting up, the bluetooth connects and disconnects with my trackpad 3 to 4 times and then i get a gray sheet that drops down from the top to bottom of the desktop then a box in the center that tells me to use the power button to do a forced shutdown. wireless keyboard connects with no problem. went to the apple store and they replaced the bluetooth card. still have the same problem. removed the batteries from the trackpad, strted up and no problem connecting with wireless mouse and keyboard. anyone else experience this?

    This could be a software/state problem or a hardware problem.  Here are steps to resolve the former.
    http://support.apple.com/kb/TS2570
    https://discussions.apple.com/docs/DOC-5282

  • I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.

    I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.
    I saw this report being sent to Apple:
    Interval Since Last Panic Report:  581719 sec
    Panics Since Last Report:          10
    Anonymous UUID: F4CF708D-D85C-4EC5-8047-4FC22C6B03AF
    Fri Mar  7 13:00:14 2014
    panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800020c590, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000007541000, CR4: 0x0000000000040660
    RAX: 0xffffff8000000000, RBX: 0xffffff800d35a870, RCX: 0xffffff800cf55cd8, RDX: 0xffffff80008a8fcc
    RSP: 0xffffff805e5f3d60, RBP: 0xffffff805e5f3da0, RSI: 0x000000001dcd6500, RDI: 0xffffff800d168778
    R8: 0x0000000000000001, R9: 0xffffff805e5f3e88, R10: 0x0000000000000011, R11: 0x0000000000000000
    R12: 0x0000000000000000, R13: 0xffffff800d168770, R14: 0xffffff800d168778, R15: 0x0000000000000000
    RFL: 0x0000000000010082, RIP: 0xffffff800020c590, CS:  0x0000000000000008, SS:  0x0000000000000010
    Error code: 0x0000000000000000
    Backtrace (CPU 0), Frame : Return Address
    0xffffff805e5f3a00 : 0xffffff8000204d15
    0xffffff805e5f3b00 : 0xffffff80002d1208
    0xffffff805e5f3c50 :
    Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
    Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
    Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
    Serial ATA Device: OPTIARC DVD RW AD-5970H
    USB Device: FaceTime HD Camera (Built-in), 0x05ac  (Apple Inc.), 0x8509, 0xfa200000 / 3
    USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 5
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x821a, 0xfa113000 / 8
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0245, 0xfa120000 / 4
    USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0xfd110000 / 3

    Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
    There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
    If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
    Run Rember first... call back with results.
    Good luck,
    Clinton

  • HT3053 I have a 13inch MacBook Pro and when I switch it on the apple logo appears then a slot and the circular symbol which is turning and then before opening the home screen it switches off again. Is there a sequence that I can use to force it to load.

    I have got a 13 inch MacBook Pro and it got stuck in a loop so I switched it off by holding the power button down and now when I switch it on the apple logo appears then I get a blank slot at the bottom of the screen then the circle appears and rotates and then it switches off again, I have tried starting it again with the system disc that came with it when it was new but it makes no difference. Is there a sequence that I can use to force it to start.

    Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
    Take it to whoever replaced the screen and see if they can help you.
    iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked.

Maybe you are looking for