Correct project settings for Brinno time lapse cameras?

Hi,
I am totally new to all this so please forgive if an obvious answer. I have been doing a building project time lapse using some time lapse cameras by Brinno. They are the TLC200's (http://www.brinno.com/html/TLC200.html). I am about to start a new project to put together the final timelapse but have no idea what type project settings to start it as. They claim to record in 1280x720 HD and output a raw avi file of the time lapse sequence after filming (each frame i think is captured as jpeg). You pre set the number of frames it takes (eg 1 every 30 minutes like I have) and what frame rate it puts the sequence of individuale captures together and outputs to the avi file (I choose 10 fps). That is all the informatoin I have. Any ideas?
Many thanks
[I though I would also mention it is ultimately going to be around a 1min30s - 2 min video at the end to be posted on youtube.]

First, you need to find out exactly what is inside your file
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen
shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/
Also... if your "raw avi file" uses the H.264 codec... it will not work
http://forums.adobe.com/thread/854115
Also... you mention jpeg... which may or may not work
MJPEG http://forums.adobe.com/thread/730396

Similar Messages

Correct PPro CS3 Project Settings for Neoscene/Cineform 1080 60i .avi files?

I am looking for clarification on the correct Premiere CS3 project settings for AVCHD 1080 60i NTSC files converted with Neo Scene with the "maintain source frame format" option.
Should the PPro project settings for "Field" be upper or lower field first?
On a Cineform discussion board I was told all interlaced HD footage is upper field first.
However, I have found that a PPro project setting of upper field first results in much more sluggish playback than lower field first.
So seems there is additional processing needed with the upper field first project setting and this suggests to me that lower field first is the proper setting.
Any thoughts from NeoScene/Cineform users out there?
Thanks!
The project settings I have been using are:
Editing Mode: Desktop
Timebase: 29.97
Frame size: 1920 x 1080
Pixel Aspect Ratio: Square Pixels (1.0)
Fields: Lower Field First
Audio: 48000

...is not so good - bad colours. In Microsoft DV Avi-DV Pal compression. D1/DV PAL Wide is pixelate. I have click the de-interlace so it is not because of that. I have no problem to use encore it the file i send is compressed in those settings i mention before. I have no problems in compressing the file with those settings at all, like i have when i want to transfor the video in avi uncompressed.
Oaaa...i am going crazy here. I have had so many problems with this and if i end up working this documentary and not beeing able to export it i go mad!...this if i do not go there before because of this problems...

Whats the best settings for exporting a three camera youtube video on a mac book pro

I need help figureing out Whats the best settings for exporting a three camera youtube video on a mac book pro. I use 15 or 30 fps and aI cant figurwe it out [please help

chucknoris501
What version of Premiere Elements are you using on Mac?
Export your Timeline content to a .mp4 file, using export settings which have been customized under the Advanced Button/Video Tab of the export's preset.
See Publish+Share/Computer/AVCHD and .mp4 category. The exported file is then uploaded to YouTube at the YouTube web site.
If you post the properties of your source video and project settings, I will suggest the settings for the Timeline content export to file saved to the computer
hard drive for upload to YouTube at the YouTube web site.
ATR

Project settings for mixing AVCHD and iPhone video

Hello,
It seems that getting the correct project settings is imporant to Premiere, but what if I would like to mix AVCHD video with iPhone 3GS video? Which project settings would I select in this case?
Thank you.

This question aroused my curiosity and I tried mixing 1080i AVCHD and Nokia phone .3gp video on an 1080i AVCHD timeline in PE8 - the 3gp video played fine, the AVCHD video needed the timeline rendered to give a decent quality playback. I realise that's different from iPhone video, but I'm simply suggesting that it's worth trying, and that project presets don't necessarily mean that only the preset file type will work.
I have to say that this whole project settings thing is a mystery to me. Why does a 1080i AVCHD preset make a better job of playing back 3gp video from the timeline than it does playing back 1080i AVCHD? Weird. Why not just handle all that in the background (eg without asking the user for any settings at all, like one NLE here does, or simply setting the timeline to the first clip of the project (optionally) like another one here does?
As for the comment earlier on about background rendering - here (after a day or so) it seems to be not a very useful thing. Much grinding by the CPU for a very slow result. To get the timeline to play smoothly it's much quicker to position the work area bar as required and hit "enter". Also, one has to watch for the new analysis process, which once started seems to create an everlasting CPU intensive process even if you cancel it. You have to keep a sharp eye on the process manager and see what's consuming CPU cycles (if you don't know already) and kill any apparently rouge Adobe-related processes by hand. "Bmem" is your friend here, which is about the first thing I install on any PC of mine - badmofo.org/bmem is the site for this excellent freeware app.

TS2758 I need to know the correct account settings for my mail on my Iphone 3G please

I need to know the correct account settings for my mail on my Iphone 3G please?

How would anyone here know the correct settings for your mail account?

HT1494 hi....i cant continuously play my music with my ipod nano....i tried a lot with the settings for wake time but still it is pausing the music path.Please anybody help me with this issue

hi....i cant continuously play my music with my ipod nano....i tried a lot with the settings for wake time but still it is pausing the music path.Please anybody help me with this issue

Is this your problem?
iPod nano (6th generation): Music stops when display turns off
B-rock

[svn:fx-trunk] 7801: Submit on behalf of Pete - an update to the project settings for the flex4test project , the link type was wrong.

Revision: 7801
Author:   [email protected]
Date:     2009-06-12 14:38:25 -0700 (Fri, 12 Jun 2009)
Log Message:
Submit on behalf of Pete - an update to the project settings for the flex4test project, the link type was wrong.
Doc Notes: None
Bugs: None
Reviewer: none
tests: compile & run
Modified Paths:
    flex/sdk/trunk/development/eclipse/flex/flex4test/.actionScriptProperties

Wait a second...there is more to that error message that I overlooked before.
There might be something other than just the way I set the CODE and CODEBASE parameters wrong here
Any ideas?
Here is the entire messsage:
load: class DisplayMonoApplet.class not found.
java.lang.ClassNotFoundException: DisplayMonoApplet.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more

Which project settings for project for Canon Powershot Video Editing?

Which project settings for project for Canon Powershot Video Editing?
I want to edit video taken with a Canon Powershot SD 550 taken in NTSC 640 x 480. When I start a new project, which project settings should I be using? Also when exporting the project to view on a computer should I stick with the AVI or will MPEG or another universal format give me better end quality?

Hunt,
This user has two thread topics here that are identical to ones at the forum which I frequent. Early on I downloaded video from the Canon Powershot that he says he is using for the basis of my comments. So, I have put that video through gspot myself. Since the user is going between the two forums (mostly here), I did not want anything lost in the back and forth. The goal is to help attainment of the goal. That is why I am including comments at both locations:
At The Other Forum
Project Settings Thread
http://www.elementsvillage.com/forums/showthread.php?t=52299
Rotation Thread
http://www.elementsvillage.com/forums/showthread.php?t=52298
The user has gotten back to me on the video rotation issue, thanking me, but telling me that another workflow was identified...and, as I note, generously shared with both sites. I am in the process of personally checking out what he said worked for him in that regard. However, the user has not gotten back to me on the topic of project settings.
So to expedite matters, when you get a chance, could you please check out my comments in that thread? I would be interested in your perspective on the matter and what I wrote.
Thanks.
ATR

HT3228 What's the correct email settings for the fastest email receiving on my iPhone 4s

What's the correct email settings for the fastest email receiving on my iPhone 4s

As no one here knows who your email provider is, no, no one can help. Have you tried looking at your email provider's help pages? Done an internet search?

Projects settings for AVCHD MTS files in Adobe Premiere Elements 8

Hello,
I have read several discussions already, about importing AVCHD MTS file in Adobe Elements (version 8), but I'm also confused a littlebit, so I would like to confirm if I'm correct.
FYI, I have a Canon Legria HFR26 camera and am using Adobe Premiere Elements 8 (with the latest updates installed).
According to the specs in the Canon instruction manual:
Videos are recorded in high definition using AVCHD specifications
(MPEG-4/H.264 compression).
Audio compression: Dolby Digital 2ch
The camera supports making video's in different format, but I have done it in the default SP format, which results in a resolution of 1440x1080 (50 fields per second, interlaced).
I have copied the video from the camera to my harddisk, and Windows also mentions the video's as AVCHD of 1440x1080 (Bitrate 7672kbps).
The frame rate is 25 frames/second. I assume this is correct for 50i?
So, when I import my video's into Adobe Elements 8, I select the following projects settings:
PAL, AVCHD, HD 1080i 25
Because the description matches my video files:
- For editing with 1440x1080i AVCHD camcorders.
- 16:9 interlaced HD video at 25 frames per second.
- 48kHz audio.
The video's are imported correctly and I can play them. However, as soon as I drop a video on the timeline, Adobe immediately starts background rendering the video (a red line appears on the timeline).
What I understand from some discussions, is that this shouldn't happen, because the video format doesn't match the project settings. On the other hand, I have also read that for Adobe Elements 8 this is normal behaviour and it always start background rendering AVCHD video's.
Is this expected behaviour or should I chance my projects settings or maybe even convert my video files to a different format?
Thanks,
Michiel

The ability to work natively with AVCHD files was not added until version 10, Michiel. So you'll still have to render while you work in version 8.

Correct sequence settings for Sony HandyCam?

I have a Sony HandyCam DCR-SR200 and when i drag the video over in premiere to add it to the edited video it tells me to check my sequence setting meaning i set it up wrong for that type of video? i just used standard settings. But, if i click change or keep, the video is extrmely zoomed in. How can i change this? The correct sequence settings or am i missing a setting? It's Premiere CS6. Thanks!

Please NOTE that the PPro CS6 screen may look a bit different (I use CS5)
For CS5 and later, the easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341
Plus, a tutorial list in message #3 http://forums.adobe.com/message/2276578

Settings for port forwarding IP cameras

I am trying to configure Airport Extreme to set them up for Port Forwarding. As I have found many times, the directions are set up for routers on PC's, not on Macs... I have accessed Port Forwarding before for other cameras, and tried to do it the same way as before, but when I click on UPDATE to update the Airport Express, and then check on the settings I made for the camera, the settings are missing...I am not sure if there is one set of Port numbers I should be using but am not... Also, on the very first heading of a port forwarding window, there are apparently several default set ups, Remote access, Mail etc.. but none for IP cameras.. wondering if there is one set up I should use in this heading. Thanks for any help or advice....
Geoff

the program that came with the camera found the IP address for the camera but lists a web address for my LAN, not a WAN...ie http://10.0.1.34/ how do I either find out what IP address the DHCP gave the camera
The 10.0.1.34 IP address is the one assigned by the DHCP server in your AirPort Extreme router.
how do I either find out what IP address the DHCP gave the camera, if it did, or assign one to the camera so that its accessible from outside my LAN? like an IP address of 198. etc...
Typically, you will want to assign a static Private IP address for your IP camera. You can then port map to this static address when attempting to access the camera from the Internet. In this case you will want to use the DHCP Reservations feature that is located on the DHCP tab within the AirPort Utility.
Accessing the camera from the Internet would require the public WAN-side IP address of your router. This address is provided to you from your ISP. So for example, if your camera is accessable from a web browser, you would enter http://<your WAN-side IP address>:80 in the browser when you are at a remote location.

Batch Process For HDR Time Lapse?

Hi,
I'd like to batch process a sequence of 830 photos. I basically want to make two copies of each - one with less exposure (darker) and one with more (lighter) so at the end I'll have 2490 images (in separate projects). Incidentally, something I've noticed is that when selecting one photo for adjustments it automatically duplicates the photo alongside the original, I'd like to temporarily disable this so I can select all the photos in one project and adjust them as one so they all turn out the same. In case you haven't guessed already it's for an HDR time lapse film I'm making. I'll then be taking the images to photomatix for more processing - a whole other forum to visit then...
Any ideas?
Thanks.

Cecilstar wrote:
Hi,
I'd like to batch process a sequence of 830 photos. I basically want to make two copies of each - one with less exposure (darker) and one with more (lighter) so at the end I'll have 2490 images (in separate projects).
No reason I know this can't be done. Lift and stamp adjustment.
Incidentally, something I've noticed is that when selecting one photo for adjustments it automatically duplicates the photo alongside the original, I'd like to temporarily disable this so I can select all the photos in one project and adjust them as one so they all turn out the same.
Aperture→Prefs→Advanced→{uncheck "Create new versions when making adjustments"}.
In case you haven't guessed already it's for an HDR time lapse film I'm making. I'll then be taking the images to photomatix for more processing - a whole other forum to visit then...
What's the subject? I'd like to see the film.
Any ideas?
Thanks.

Best settings for Point Grey Flea camera

Hi
Can anyone using Point Grey Camera(Flea) find out the best settings(Hue, White Balance U, White balance V, Saturation....) for best image quality.
Regards
Abhishek Verma

chucknoris501
What version of Premiere Elements are you using on Mac?
Export your Timeline content to a .mp4 file, using export settings which have been customized under the Advanced Button/Video Tab of the export's preset.
See Publish+Share/Computer/AVCHD and .mp4 category. The exported file is then uploaded to YouTube at the YouTube web site.
If you post the properties of your source video and project settings, I will suggest the settings for the Timeline content export to file saved to the computer
hard drive for upload to YouTube at the YouTube web site.
ATR

Correct Format Settings for Import

I'm trying to figure out the correct settings for exporting a project from Avid Adrenaline to then import for iDVD at the best quality.
I've tried QT movie. It looks fine. Then I import it into iMovie to create chapters then to iDVD. The finished product has some issues playing back movement... most noticed in lip movement. Could iMovie be causing this problem?
Thanks,
Ken J.
iMac G5 Mac OS X (10.3.7)

Common problem. Solutions can be found here...
http://www.danslagle.com/mac/iMovie/audio/1001.shtml
Patrick

Correct project settings for Brinno time lapse cameras?

Similar Messages

Maybe you are looking for