Correct User Exit search for a Buisness Process..
Hi Team,
Can someone please explain me how should i go about to search for the correct User Exit running behind a Process(A buisness Process ) which would require certain enhancements ..
Thanks .
Regards,
SK
Hi,
Go to SE93, and give the t.code which you want
Then take the package and go to SMOD
There click F4 for enhancements, then click on information system, there you give package and enter
Now, you will get corresponding exits.
this is one way.
other way is we need to check whole program or exit
go to that t.code, goto system -->status .There find out the prog name.
Then double click the program name.
In attributes teb, you find the package.
go to SMOD, press F4 and input package
Hope this helps
Regards,
Anbu
Similar Messages
-
Correct user exit need for vl32n - post goods receipt.
Sorry this is not the correct forum . SO please don't look in to this
For vl32n , upon "Post goods receipt" button click, I was writing code in "mv50afz1" ...Basically in the "mv50afz1" program, I am clearing the value of batch(charg) and the same batch value I am assigning to vendor batch(am doing by moving xlips-charg value to xlips-lichn).
But the thing is my logic should be written in one of the userexit before this user exit( Why because SAP generates one batch on it's own and assigns that to batch if it the batch field in vl32n is space - If batch field is not space SAP's generated batch won't be assigned - So I need to make the batch value space in vl32n upon click of "Post goods receipt" button to allow assignment of SAP's batch).
So could you please suggest me is there any user exit available for this ?
THANKS.
Edited by: sam kumar on May 8, 2009 7:22 PMI am sorry this i snot the correct forum.
-
To find out appropriate user exit/ badi for transaction VT01n
Hi,
I have the following requirement.
Cass shipment type (VTTK-ADD03) field needs to be required and should be automatically populated upon creation of the shipment document. The rules for populating the value (SO, ST, PO and RA) are as follows:
If any of the orders on the shipment are customer order types, then the CASS shipment type should be a SO,
If all of the orders are STO orders, then the Cass shipment type should be "ST",
If all of the orders are PO orders, then the Cass shipment type should be "PO" , and
If all of the orders are customer return orders, then the Cass shipment type should be "RA".
I have to find out proper user exit / badi to do this.I have tried with many userexit but it won't work.
Thanking in advance to give your suggestion in order to resolve it.
With regards,
Ajit.Hi this code will enable you to find the user exit for any transaction . Just give the transaction as input
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
*---End of Program
Just for your information the User exits available for VT01n are
MV56AINI Initialization of transaction control for transportation
V56AFCCH Shipment processing: Check function code allowed
V56AGTAR User Exit for Filtering Shipping Unit Calculation
V56ARCHV Customer-spec. checks for archiving shipments
V56ATKTX Change the number of lines for text input in shipment
V56BMOD Transportation processing: Field modification
V56DISTZ Shipment Processing: Determine Distance
V56FCOPY Shipment processing: Copy delivery data
V56FSTAT Shipment processing: Activities when setting a status
V56L0001 Status of Shipments for a Delivery
V56LDELI Read Delivery Data for Shipment Processing
V56LOCID Shipment Processing: Determine Location Identification
V56MVT04 Extensions for Collective Processing of Shipments
V56SLDET Shipment processing: Leg determination
V56TDLIF Filter Delivery Items for Shipment
V56UCHCH Shipment processing: Check whether changes were made
V56UCHCO Check shipments are complete
V56UDLUP Obsolete as of 4.6C: Delivery Update on Delivery Routines
V56UNUMB Shipment number allocation
V56USTAT User-individual definition of transportation planning status
V56USVDO Update new objects for transport
V56USVDP Preparation for updating new objects for transport?
Award points if helpful..
Thanks -
User exit IPRM0002 for preventive maintenance
user exit IPRM0002 for preventive maintenance
has anyone used this user exit? or BADI: BAdI: IPRM_MCP_SCHE_CHANGE ?
I seem to have some difficulty in knowing how to use these....
I need to basically be able to influence a calling date for next PMorder to be opened but documentation is not explanatory and, even if I do know what these exit/badi are used for, i do not understand how to use the parameters provided.
can anyone help?Hi,
I dont think you would be able to test the exit if you dont implement them for the user exits simply passing the parameters wont help,actually there is a process of implementing a USER-EXIT i suppose u would already be familiar to it, I order to activate the exit you have to create a project in CMOD transaction and assign the enhancement to that and then also create the include that is avaliable inside the FM and there you would be able to put your code.
For the BAPIs ,yes the control should go inside the BADI once you put a breakd point inside the right method but there to you need to implement the BADI and then you can put your code in the method for the effects to take place and you can test.
The detail process of implementation are already avaliable on SCN, It seems that you dont have developer authorizations so i would suggest to take help from some one who has, Best of Luck:).
Regards,
Himanshu -
Can anyone give me user exit name for create/update purchase order partners
Hello guys
Can anyone gives me user exit name for create/update purchase order partners?
Requirement is to insert/update partner when SC flag is checked while creating/updating purchase order (ME22N / ME21N) by using user exit.hi,
check these exits.
Transaction Code - ME21N Create Purchase Order
Enhancement/ Business Add-in Description
Enhancement
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
M06B0003 Number range and document number -
User Exit & BADI for controling the END user in co06
Hi
I HAVE SOME 2 DOUBTS
1. I need a user exit / BADI for controlling the user to edit a specific document type in co06 (BACKORDER PROCESSING) .
the control should be actve for specfic order type for specfic users
2 DEPENDS ON ORDER TYPE I NEED TO CONTROL THE ALLOCATION , AND HOW TO CHECK THE SAFETY STOCKAnswer cannot be Provided properly , so has to Post more questions . i am jus closing my ques??
-
MEREQ001 User Exit Problem for ALV Columns.
Hello,
I am using this user exit to make changes to the Purchase requisition enjoy transaction. There is an ALV used for item details and if you use the customer CI_EBANDB include in EBAN table you can see those fields available in the alv and you can add them up using change layout.
To make these fields editable as they remain in display always inspite of the fact that you use ME51n or ME52n.
MM --> Purchasing --> Purchase Req -->Define Scree Layout at document level.
is the configuration required as per a previous mail thread in the forum. However when i go to spro i am not able to see those new fields which i have added for KEY FIELD selection. Am i missing something or has anybody before done this... Could anybody guide me with the step by step process.
Regards,
Shekhar KulkarniHello,
In 46C, I checked and found no user exits / BADIs for your requirement. If you are very keen of this feature, may be that you have to modify the SAP standard. Not a good option.
Regards, Murugesh AS -
User Exit MIGO for Purchase Orders
I need to check a purchase order during the Migo process.
I tried the User Exit EXIT_SAPLEINR_001, but the break-point has no effect. The user- exit is useful for schedule agrmts but it seems that there is a different handling.
Do you have an idea where I can check the MIGO date?hi alexander,
this program will display all the user exits available for any specified Tcode.
when u execute this code...... it will ask for tcode..... u enter any tcode.... it will display all available exits for specified tcode.....
i hope this may help u...... all the best....
report y_user_exit .
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
reward me if it is useful..............
with regards..... -
Hello Gurus,
My requirement is that I need to change an Invoice Line Item data before the actual posting in Background via Program RMBABG00.
It would be great if somebody could please tell me, is there any USER-EXIT / BADI for doing the above mentioned task.
I will be really helpful as it is very urgent!!!!!
Thanks in advanceHi,
these user exits avialable for Tcode MIRA...
LMR1M001 User exits in Logistics Invoice Verification
LMR1M002 Account grouping for GR/IR account maintenance
LMR1M003 Number assignment in Logistics Invoice Verification
LMR1M004 Logistics Invoice Verification: item text for follow-on docs
LMR1M005 Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006 Logistics Invoice Verification: Process XML Invoice
MRMH0001 Logistics Invoice Verification: ERS procedure
MRMH0002 Logistics Invoice Verification: EDI inbound
MRMH0003 Logistics Invoice Verification: Revaluation/RAP
MRMN0001 Message output and creation: Logistics Invoice Verification
regds,
paras -
Hi all,
I have a requirement to display Requirement. Plan number: (PLAF-PBDNR) in Co01/02/03. Anyone knows user exit / badi for the same ?
Thanks and regards
JijoExit Name Description
CCOWB001 Customer exit for modifying menu entries
COIB0001 Customer Exit for As-Built Assignment Tool
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
PPCO0001 Application development: PP orders
PPCO0002 Check exit for setting delete mark / deletion indicator
PPCO0003 Check exit for order changes from sales order
PPCO0004 Sort and processing exit: Mass processing orders
PPCO0005 Storage location/backflushing when order is created
PPCO0006 Enhancement to specify defaults for fields in order header
PPCO0007 Exit when saving production order
PPCO0008 Enhancement in the adding and changing of components
PPCO0009 Enhancement in goods movements for prod. process order
PPCO0010 Enhancement in make-to-order production - Unit of measure
PPCO0012 Production Order: Display/Change Order Header Data
PPCO0013 Change priorities of selection crit. for batch determination
PPCO0015 Additional check for document links from BOMs
PPCO0016 Additional check for document links from master data
PPCO0017 Additional check for online processing of document links
PPCO0018 Check for changes to production order header
PPCO0019 Checks for changes to order operations
PPCO0021 Release Control for Automatic Batch Determination
PPCO0022 Determination of Production Memo
PPCO0023 Checks Changes to Order Components
STATTEXT Modification exit for formatting status text lines -
User Exit / BADi for TCode - IMA11 (Create Appropriation Request )
Hi friends ,
Can anyone help me in finding the User Exit / BADI for Transaction IMA11 (Create Appropriation Request , Module - FI ).I want to create search help for field "Partner" in table control "Person Involved" present in this transaction.
Thanks in advance.
Regards
Nand KishorHi,
The following user exits are available :
Exit Name Description
AAIR0001 IM-IS: User value fields in app.req. reporting
AAIR0002 IM-FA: User fields for app. requests
AAIR0003 IM: Workplace assignmt when creating PM order from app.req.
AAIR0004 IM Drilldown: Definition of User-Defined Characteristics
AAIR0006 IM-FA-IA: Data Transfer from App. Req. to WBS Element
regards
Aveek -
User exit / badi for transaction appcreate
Hi,
Can nyone help me in getting user exit / badi for transaction appcreate .
Cheers
kamleshHi Kamlesh,
Try below code to know the userexits for the given trxn code.
Regards,
Raj
*& Report ZTESTRAJ_USEREXITS
REPORT ztestraj_userexits
NO STANDARD PAGE HEADING
LINE-SIZE 200
MESSAGE-ID zz.
T A B L E D E C L A R A T I O N S *
TABLES: tftit,
e071,
e070.
S T R U C T U R E D E C L A R A T I O N S *
TYPES: BEGIN OF x_tstc,
tcode TYPE tcode,
pgmna TYPE program_id,
END OF x_tstc.
TYPES: BEGIN OF x_tadir,
obj_name TYPE sobj_name,
devclass TYPE devclass,
END OF x_tadir.
TYPES: BEGIN OF x_slog,
obj_name TYPE sobj_name,
END OF x_slog.
TYPES: BEGIN OF x_final,
name TYPE smodname,
member TYPE modmember,
include(15), "Include name
END OF x_final.
I N T E R N A L T A B L E D E C L A R A T I O N S *
DATA: it_tstc TYPE STANDARD TABLE OF x_tstc WITH HEADER LINE.
DATA: it_tadir TYPE STANDARD TABLE OF x_tadir WITH HEADER LINE.
DATA: it_jtab TYPE STANDARD TABLE OF x_slog WITH HEADER LINE.
DATA: it_final TYPE STANDARD TABLE OF x_final WITH HEADER LINE.
V A R I A B L E S D E C L A R A T I O N S *
U S E R I N P U T S S C R E E N *
S E L E C T I O N S C R E E N *
SELECTION-SCREEN: BEGIN OF BLOCK blk01 WITH FRAME TITLE text-t01.
PARAMETERS: p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk01.
S t a r t o f S e l e c t i o n *
START-OF-SELECTION.
PERFORM get_tcodes. "Get Tcodes
PERFORM get_objects. "Get Objects
E n d o f S e l e c t i o n *
END-OF-SELECTION.
PERFORM display_results. "Display Results
*& Form get_tcodes
Get Tcodes
FORM get_tcodes.
SELECT tcode
pgmna
INTO TABLE it_tstc
FROM tstc
WHERE tcode = p_tcode.
IF sy-subrc = 0.
SORT it_tstc BY tcode.
ENDIF.
ENDFORM. " get_tcodes
*& Form get_objects
Get Objects
FORM get_objects.
DATA: l_fname LIKE rs38l-name,
l_group LIKE rs38l-area,
l_include LIKE rs38l-include,
l_namespace LIKE rs38l-namespace,
l_str_area LIKE rs38l-str_area.
DATA: v_include LIKE rodiobj-iobjnm.
DATA: e_t_include TYPE STANDARD TABLE OF abapsource WITH HEADER LINE.
DATA: l_line TYPE string,
l_tabix LIKE sy-tabix.
IF NOT it_tstc[] IS INITIAL.
SELECT obj_name
devclass
INTO TABLE it_tadir
FROM tadir FOR ALL ENTRIES IN it_tstc
WHERE pgmid = 'R3TR' AND
object = 'PROG' AND
obj_name = it_tstc-pgmna.
IF sy-subrc = 0.
SORT it_tadir BY obj_name devclass.
SELECT obj_name
INTO TABLE it_jtab
FROM tadir FOR ALL ENTRIES IN it_tadir
WHERE pgmid = 'R3TR' AND
object = 'SMOD' AND
devclass = it_tadir-devclass.
IF sy-subrc = 0.
SORT it_jtab BY obj_name.
ENDIF.
ENDIF.
ENDIF.
*- Get UserExit names
LOOP AT it_jtab.
SELECT name
member
INTO (it_final-name, it_final-member)
FROM modsap
WHERE name = it_jtab-obj_name AND
typ = 'E'.
APPEND it_final.
CLEAR it_final.
ENDSELECT.
ENDLOOP.
*- Process it_final contents.
LOOP AT it_final.
l_tabix = sy-tabix.
CLEAR: l_fname,
l_group,
l_include,
l_namespace,
l_str_area.
l_fname = it_final-member.
CALL FUNCTION 'FUNCTION_EXISTS'
EXPORTING
funcname = l_fname
IMPORTING
group = l_group
include = l_include
namespace = l_namespace
str_area = l_str_area
EXCEPTIONS
function_not_exist = 1
OTHERS = 2.
IF sy-subrc = 0.
IF NOT l_include IS INITIAL.
*- Get Source code of include.
CLEAR: v_include, e_t_include, e_t_include[].
v_include = l_include.
CALL FUNCTION 'MU_INCLUDE_GET'
EXPORTING
i_include = v_include
TABLES
e_t_include = e_t_include.
IF sy-subrc = 0.
LOOP AT e_t_include.
IF e_t_include-line CS 'INCLUDE'.
CLEAR l_line.
l_line = e_t_include-line.
CONDENSE l_line NO-GAPS.
TRANSLATE l_line USING '. '.
l_line = l_line+7(9).
it_final-include = l_line.
MODIFY it_final INDEX l_tabix TRANSPORTING include.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " get_objects
*& Form display_results
Display Results
FORM display_results.
FORMAT COLOR COL_HEADING.
WRITE:/1(150) sy-uline.
WRITE:/ sy-vline,
2(23) 'Extension Name',
24 sy-vline,
25(39) 'Exit Name',
64 sy-vline,
65(74) 'Description',
140 sy-vline,
141(9) 'Include',
150 sy-vline.
WRITE:/1(150) sy-uline.
FORMAT RESET.
SORT it_final BY name member.
LOOP AT it_final.
CLEAR tftit.
SELECT SINGLE stext
INTO tftit-stext
FROM tftit
WHERE spras = 'EN' AND
funcname = it_final-member.
WRITE:/ sy-vline,
it_final-name COLOR COL_KEY, 24 sy-vline,
25 it_final-member, 64 sy-vline,
65 tftit-stext, 140 sy-vline,
141 it_final-include, 150 sy-vline.
WRITE:/1(150) sy-uline.
ENDLOOP.
ENDFORM. " display_results -
User Exit / Badi For CJ37, CJ34, CJ38
I want user Exit / Badi For CJ37, CJ34, CJ38 which will execute whenever there is any change for WBS budget (supplement / transfer / return) regardless WBS have assigned values.
This is required to trigger my Workflow.
Available Exit which i know is EXIT_SAPLBPFC_002 is executing only when WBS have assigned values otherwise not.
PLease reply ASAP.Even you can search all exit and BADI:
https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=howtofinduserexitandbadi&adv=false&sortby=cm_rnd_rankvalue -
User Exit/BADI for Transaction CNR1 & CNR2
Hi All,
We have a requirement where we need to make use of the transaction CNR1 & CNR2 to validate the employee number, can anyone tell me is there any user exit/BADI available for this purpose, I have searched for the user exits using a small utility program which resulted in 'No Exits',
Your quick help would be highly appreciated,
Rgds,Hi Sailatha,
I am not very clear with the requirement. I would appreciate if you can explain me the scenario.
As I understand the requirement there is no user exit exists for this purpose but there is one BADI available for CNR2 which can only be used if we try to remove the HR assignment to work center and the assignment is to Object Type "US" (User HR object). Hope this helps.
Definition name: CRHRORG
Method: CHECK_DEASSIGN_HRORG
Kind Regards,
Sanjeev Munjal -
User-Exits/Badis for T.Code Co01 Production Order
Hi Friends,
Please can any one give the User-Exits/ Badis For Co01 , I need to link the Material with Documents....
Thanks,
Ravi...........These are the available user exits..
CCOWB001 Customer exit for modifying menu entries
COIB0001 Customer Exit for As-Built Assignment Tool
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
PPCO0001 Application development: PP orders
PPCO0002 Check exit for setting delete mark / deletion indicator
PPCO0003 Check exit for order changes from sales order
PPCO0004 Sort and processing exit: Mass processing orders
PPCO0005 Storage location/backflushing when order is created
PPCO0006 Enhancement to specify defaults for fields in order header
PPCO0007 Exit when saving production order
PPCO0008 Enhancement in the adding and changing of components
PPCO0009 Enhancement in goods movements for prod. process order
PPCO0010 Enhancement in make-to-order production - Unit of measure
PPCO0012 Production Order: Display/Change Order Header Data
PPCO0013 Change priorities of selection crit. for batch determination
PPCO0015 Additional check for document links from BOMs
PPCO0016 Additional check for document links from master data
PPCO0017 Additional check for online processing of document links
PPCO0018 Check for changes to production order header
PPCO0019 Checks for changes to order operations
PPCO0021 Release Control for Automatic Batch Determination
PPCO0022 Determination of Production Memo
PPCO0023 Checks Changes to Order Components
STATTEXT Modification exit for formatting status text lines
Maybe you are looking for
-
sir i have given lot of effort but i am not able to solve my problem either with notifiers or with occurence fn,probably i do not know how to use these synchronisation tools.
-
Can I run a report based on the occurance of an event in the database
(eg some data has been inserted into a table)? I read in the FAQ of Report that is possible and i have to use some PL/SQL stored procedures in the database that use the UTL_HTTP package (available in 7.3 or later) to issue the HTTP request to the ser
-
hi, Connection to the queue is not establised after a crash of one node I'd be grateful if anyone confirmed that my jms clustered queues are configured and handled correctly from API point of view. I have: - cr
-
Install itunes without bonjour or apple mobile device support
For my company having bonjour is not an option and is considered a security threat,even after uninstalling bonjour it still appears in the registry. Therefore it was nessesary to put on our company server the msi file for itunes. To install itunes WI
-
please tell me the purchase and sales transaction codes and to this codes name the relevant table these codes are joined up