Corrupted pack file: magic/ver = CAFED00D/160.1 should be CAFED00D/150.7

Hi
While unpacking the jars I am getting the following exception...
Corrupted pack file: magic/ver = CAFED00D/160.1 should be CAFED00D/150.7
Can anyone please comment.?

Yes..The jars were created with building project with ant script(setting target="1.5").And I was trying to unpack these jars with java1.5
As per javac sepcifications we can do a cross compile(http://java.sun.com/j2se/1.4.2/docs/tooldocs/windows/javac.html).
Edited by: Vikz on May 15, 2009 5:05 PM

Similar Messages

JBoss Shuts Down while reading a Corrupt Zip File

Hi,
I have a strange problem, where the jboss crashes when i read a corrupt file.
Code is like this :
ZipFile zipfile = null;
Enumeration e = null;
try
zipfile = new ZipFile(zipFile);
e = zipfile.entries();
catch(Exception e1) {
e1.printStackTrace();
while(e.hasMoreElements()) {
ZipEntry entry = (ZipEntry) e.nextElement();
JBoss Error Description :
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x77FCD91F
Function=RtlDestroyHeap+0x2DB
Library=C:\WINNT\system32\ntdll.dll
Current Java thread:
     at java.util.zip.ZipFile.getNextEntry(Native Method)
     at java.util.zip.ZipFile.access$400(Unknown Source)
     at java.util.zip.ZipFile$2.nextElement(Unknown Source)
     - locked <0x1122c828> (a java.util.zip.ZipFile)
     at com.intruvert.alertarchival.process.CoreRestore.extractDescriptionXML(Unknown Source)
     at com.intruvert.alertarchival.process.ArchivalManager.getArchivalZipFileInfo(Unknown Source)
     - locked <0x330cf478> (a com.intruvert.alertarchival.process.ArchivalManager)
     at com.intruvert.mgmt.alertarchival.AlertArchivalBean.getArchivalZipFileInfo(AlertArchivalBean.java:235)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:683)
     at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:186)
     at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:72)
     at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:84)
     at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:315)
     at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:148)
     at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:111)
     at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:191)
     at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:122)
     at org.jboss.ejb.StatelessSessionContainer.internalInvoke(StatelessSessionContainer.java:331)
     at org.jboss.ejb.Container.invoke(Container.java:709)
     at sun.reflect.GeneratedMethodAccessor103.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.jboss.mx.server.ReflectedDispatcher.dispatch(ReflectedDispatcher.java:60)
     at org.jboss.mx.server.Invocation.dispatch(Invocation.java:62)
     at org.jboss.mx.server.Invocation.dispatch(Invocation.java:54)
     at org.jboss.mx.server.Invocation.invoke(Invocation.java:82)
     at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:197)
     at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:473)
     at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:97)
     at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:90)
     at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:46)
     at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:55)
     at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:100)
     at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:85)
     at $Proxy236.getArchivalZipFileInfo(Unknown Source)
     at com.intruvert.ui.util.busobj.DBManager.getArchividFile(DBManager.java:397)
     at com.intruvert.ui.util.busobj.DBManager.getFileTransferInfo(DBManager.java:274)
     - locked <0x10ee9ed8> (a com.intruvert.ui.util.busobj.DBManager)
     at com.intruvert.ui.util.servlet.CArchivalUploadServlet.doUpload(CArchivalUploadServlet.java:157)
     - locked <0x15789860> (a com.intruvert.ui.util.servlet.CArchivalUploadServlet)
     at com.intruvert.ui.util.servlet.CArchivalUploadServlet.doPost(CArchivalUploadServlet.java:58)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:75)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:186)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.jboss.web.tomcat.security.CustomPrincipalValve.invoke(CustomPrincipalValve.java:66)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:158)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
     at java.lang.Thread.run(Unknown Source)
Dynamic libraries:
0x00400000 - 0x0040B000      C:\CVS_TRIMBLE\ems\Install\jre\bin\java.exe
0x77F80000 - 0x77FFD000      C:\WINNT\system32\ntdll.dll
0x7C2D0000 - 0x7C332000      C:\WINNT\system32\ADVAPI32.dll
0x7C570000 - 0x7C623000      C:\WINNT\system32\KERNEL32.DLL
0x77D30000 - 0x77DA1000      C:\WINNT\system32\RPCRT4.DLL
0x78000000 - 0x78045000      C:\WINNT\system32\MSVCRT.dll
0x75030000 - 0x75044000      C:\WINNT\system32\WS2_32.DLL
0x75020000 - 0x75028000      C:\WINNT\system32\WS2HELP.DLL
0x08000000 - 0x08138000      C:\CVS_TRIMBLE\ems\Install\jre\bin\client\jvm.dll
0x77E10000 - 0x77E6F000      C:\WINNT\system32\USER32.dll
0x77F40000 - 0x77F7B000      C:\WINNT\system32\GDI32.dll
0x77570000 - 0x775A0000      C:\WINNT\system32\WINMM.dll
0x10000000 - 0x10007000      C:\CVS_TRIMBLE\ems\Install\jre\bin\hpi.dll
0x007C0000 - 0x007CE000      C:\CVS_TRIMBLE\ems\Install\jre\bin\verify.dll
0x007D0000 - 0x007E9000      C:\CVS_TRIMBLE\ems\Install\jre\bin\java.dll
0x007F0000 - 0x007FE000      C:\CVS_TRIMBLE\ems\Install\jre\bin\zip.dll
0x44420000 - 0x4443C000      C:\CVS_TRIMBLE\ems\Install\jre\bin\jdwp.dll
0x48440000 - 0x48445000      C:\CVS_TRIMBLE\ems\Install\jre\bin\dt_socket.dll
0x74FD0000 - 0x74FEE000      C:\WINNT\system32\msafd.dll
0x75010000 - 0x75017000      C:\WINNT\System32\wshtcpip.dll
0x487D0000 - 0x487DF000      C:\CVS_TRIMBLE\ems\Install\jre\bin\net.dll
0x782C0000 - 0x782CC000      C:\WINNT\System32\rnr20.dll
0x77980000 - 0x779A4000      C:\WINNT\system32\DNSAPI.DLL
0x75050000 - 0x75058000      C:\WINNT\system32\WSOCK32.DLL
0x77340000 - 0x77353000      C:\WINNT\system32\iphlpapi.dll
0x77520000 - 0x77525000      C:\WINNT\system32\ICMP.DLL
0x77320000 - 0x77337000      C:\WINNT\system32\MPRAPI.DLL
0x75150000 - 0x7515F000      C:\WINNT\system32\SAMLIB.DLL
0x75170000 - 0x751BF000      C:\WINNT\system32\NETAPI32.DLL
0x7C340000 - 0x7C34F000      C:\WINNT\system32\Secur32.dll
0x77BF0000 - 0x77C01000      C:\WINNT\system32\NTDSAPI.dll
0x77950000 - 0x7797A000      C:\WINNT\system32\WLDAP32.DLL
0x751C0000 - 0x751C6000      C:\WINNT\system32\NETRAP.dll
0x77A50000 - 0x77B3F000      C:\WINNT\system32\OLE32.DLL
0x779B0000 - 0x77A4B000      C:\WINNT\system32\OLEAUT32.DLL
0x773B0000 - 0x773DF000      C:\WINNT\system32\ACTIVEDS.DLL
0x77380000 - 0x773A3000      C:\WINNT\system32\ADSLDPC.DLL
0x77830000 - 0x7783E000      C:\WINNT\system32\RTUTILS.DLL
0x77880000 - 0x7790E000      C:\WINNT\system32\SETUPAPI.DLL
0x7C0F0000 - 0x7C151000      C:\WINNT\system32\USERENV.DLL
0x774E0000 - 0x77513000      C:\WINNT\system32\RASAPI32.DLL
0x774C0000 - 0x774D1000      C:\WINNT\system32\RASMAN.DLL
0x77530000 - 0x77552000      C:\WINNT\system32\TAPI32.DLL
0x77B50000 - 0x77BD9000      C:\WINNT\system32\COMCTL32.DLL
0x77C70000 - 0x77CB9000      C:\WINNT\system32\SHLWAPI.DLL
0x77360000 - 0x77379000      C:\WINNT\system32\DHCPCSVC.DLL
0x777E0000 - 0x777E8000      C:\WINNT\System32\winrnr.dll
0x777F0000 - 0x777F5000      C:\WINNT\system32\rasadhlp.dll
0x49330000 - 0x49335000      C:\CVS_TRIMBLE\ems\Install\jre\bin\rmi.dll
0x49E80000 - 0x49E88000      C:\CVS_TRIMBLE\ems\Install\jre\bin\nio.dll
0x4A550000 - 0x4A556000      C:\CVS_TRIMBLE\ems\Install\jre\bin\ioser12.dll
0x4BEE0000 - 0x4BFF2000      C:\CVS_TRIMBLE\ems\Install\jre\bin\awt.dll
0x77800000 - 0x7781E000      C:\WINNT\system32\WINSPOOL.DRV
0x76620000 - 0x76630000      C:\WINNT\system32\MPR.DLL
0x75E60000 - 0x75E7A000      C:\WINNT\system32\IMM32.dll
0x7CA00000 - 0x7CA23000      C:\WINNT\system32\rsaenh.dll
0x7C740000 - 0x7C7C7000      C:\WINNT\system32\CRYPT32.dll
0x77430000 - 0x77440000      C:\WINNT\system32\MSASN1.DLL
0x77920000 - 0x77943000      C:\WINNT\system32\imagehlp.dll
0x72A00000 - 0x72A2D000      C:\WINNT\system32\DBGHELP.dll
0x690A0000 - 0x690AB000      C:\WINNT\system32\PSAPI.DLL
Heap at VM Abort:
Heap
def new generation total 54464K, used 24954K [0x10010000, 0x13b20000, 0x13b20000)
eden space 48448K, 39% used [0x10010000, 0x1128eb08, 0x12f60000)
from space 6016K, 100% used [0x13540000, 0x13b20000, 0x13b20000)
to space 6016K, 0% used [0x12f60000, 0x12f60000, 0x13540000)
tenured generation total 725952K, used 562288K [0x13b20000, 0x40010000, 0x40010000)
the space 725952K, 77% used [0x13b20000, 0x3603c398, 0x3603c400, 0x40010000)
compacting perm gen total 39424K, used 39287K [0x40010000, 0x42690000, 0x44010000)
the space 39424K, 99% used [0x40010000, 0x4266de88, 0x4266e000, 0x42690000)
Local Time = Tue Jun 21 10:27:43 2005
Elapsed Time = 198
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)
Could you please hep me out....
Thanks,
~ Ajay Sandesh

Simply remove the corrupt zip file, and replace it with the valid copy of the zip file.
regards,
Owen

Corrupt Dock File?

Hi,
So on my dock, I have my Applications Folder on it to use as a shortcut, but just recently, it started to display two of every application. See my picture:
I also have my Downloads Folder on my Dock. When I drag things from the Downloads folder into the trash can, nothing happens. But then when I click +Show In Finder+, it shows the file as deleted.
So it seems my Dock is not refreshing or something? So what I did to fix it was just remove the Applications and Downloads Folders from the Dock, and drag the Applications and Downloads folder from my hard drive to the dock. But everytime I log back in or download something else, the problem will arise again.
Do I have a corrupt dock file? I didn't want to try messing with that until I consulted +Apple Discussions+ first.
Thanks, Alex

if recreating those stacks doesn't help try resetting your dock preference file. delete the file /users/user/library/preferences/com.apple.dock.plist and enter the following terminal command
killall Dock
your dock will be rest to the default. see if the problem goes away.

Cannot backup iPhone 3GS to my computer after upgrading to IOS 5.0 due to "corrupt backup file"

How do I sync my 3GS to my computer after upgrading to IOS 5.0.1 and getting message "corrupt backup file, delete and retry"?

Some Users have reported that a Restore has Resolved Issues after the Upgrade...
Backup and Set Up as New Device
http://support.apple.com/kb/HT4137

Error -32810 occurred at The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi

I have two cFP-2120 RT controller. They both have NI-Serial RT2.5.6, DataSocket for LV RT4.2, NI-VISA 3.6, FP Drivers 5.1.0, FP VI Manager 3.1.0 LV RT 7.1.1 installed. But one same vi can run on one controller but not another.
the error message got when it runs on another controller is "Error -32810 occurred at The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi"
I wonder by what it is caused?
Thanks

Hi Matthew,
As mentioned previously, this KnowledgeBase article may be of some help. Also, if your code is being run on an embedded controller and then a network controller (not embedded), you will need to run the program differently. On the embedded controller, you should deploy your VI in a Project Explorer or programmatically (as described here.) However, you do not need to deploy the program to a network controller, but simply run the VI.
I would also suggest creating a new .IAK file. Do you still see the same error? Also, double-check that the software installed on the controller matches the software installed on the host PC. If you have any file paths associated with one FieldPoint controller, ensure that you are changing them to match the second controller.
Please keep us posted on your troubleshooting steps. Have a great day!
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments

Any way to repair corrupted pdf file?

I created a pdf document on a my PC and it became corrupted with all these strange characters.
Now when I open the document I get an error message that wasn't coming up before im hoping this msg will bring some light into the situation.
If anyone can help me id be very thankful

General Repair of Adobe Acrobat Reader corrupted .pdf file...
1. Go to adobe official site, click the "Support" tab on the top of the screen, click on "Adobe Reader," and then select the "I can't open a PDF document" statement underneath "Troubleshooting." The Support tab is located near the top of the screen as a white word against a black backdrop. After clicking Support, you will see the phrase "Product Support Centers" on a new page in bold white font, under which is "Adobe Reader." The new page after clicking "Adobe Reader" will have the word "Troubleshooting" underneath the phrase "Adobe Reader and Help Support." Underneath "Troubleshooting" is "I can't open a PDF document."
2. Follow the instructions on how to complete a general repair and installation of Adobe Acrobat Reader. To attempt the most basic PDF repair method, Open "Adobe Acrobat Reader" (select the program in your Start menu, which is on the bottom-left part of the screen), select "Help" from the gray tab menu at the top of Adobe Acrobat Reader, and click on "Repair Adobe Reader Installation." A meter should pop up indicating that your Adobe version is being checked for errors and is being linked back to the home Adobe official website just in case you need to download a new update of the program. If you need to download an updated version of the program, another pop-up will appear on your screen asking you if you want to update Adobe. Click "Yes."
3. Reopen the PDF file. It should now be readable. If not, then try the next set of directions.
4. If nothing helped, and you can't redowload .pdf file from source where it was, then use third party solution PDF On-line repair service https://onlinefilerepair.com/en/pdf-repair-online.html

Attempting to upgrade to Firefox 3.6 (using an ancient Mac OS 10.3), but received an error message (corrupt image file) when downloading - any way to correct this with my current OS?

I'm currently trying to update a few programs on my good old (VERY old) Mac Powerbook, but I ran into an error when downloading Firefox version 3.6...I'm currently running Mac OS X 10.3.9, which isn't compatible with the most recent versions of Firefox (or anything, for that matter), but it should still allow an upgrade of version 3.6; however, once the file finished downloading, an error message popped up indicating there's a corrupt image file. Is there any way to work around/correct this problem, or am I stuck with my old version of Firefox until I bite the bullet and upgrade my OS??? Any help is greatly appreciated!!

Firefox 3.6 requires at least OS X 10.4, the last version of Firefox that runs on OS X 10.3.9 is Firefox 2.0.0.20 available from https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/mac/en-US/

How to fix a corrupt .avi file (from capture in CS3)?

So I was recording a VERY long meeting at work and recorded it to my PC via Premiere. Since the recording was unattended, the file size is 275GB! I didn't really think anything would go wrong since I have recorded large .avi files in the past.
Well when I try to import the .avi or play it in media player, it is saying it is corrupt/wrong file format. I tried a few avi repair utilities and none of them fixed it. I'm guessing the avi headers are missing, but I thought Premiere wrote progressive .avi files (at least their export is progressive and valid while its writing).
Any help to repair salvage the avi? I only need about 50% of the actual content.

>wonder why you can view a video that is currently being exported
Seeing what the computer is
DOING while it is doing it is really not the same as trying to open a file after the fact
I have an inexpensive standalone DVD recorder to be able to move a movie from a DirecTv Tivo box in one part of the house to a DVD player in another part of the house
I can watch the video on the TV while it is playing from the DTivo box to the DVD recorder
If I do not properly CLOSE the disc when the recording is done, the DVD will not play
An improperly closed file is, as you found, not going to work
As I said, my best GUESS is that hitting the full point on the drive caused needed information to not be written to the header (or file end) and now any software you use to try and play or edit that file doesn't know what the file
IS because the identity is lost
I will guess that is also why the AVI repair programs you've tried won't work... they need to have some starting information to work, otherwise the contents of the file are just so much random "noise"

I followed your help directions on "Corrupt extension files" under "Unable to install add-ons", foolishly deleting the files you told me to. Now firefox won't open. I tried reinstalling firefox but it still won't open. Now what do I do?

I was trying to install the SEOQuake add on. After clicking install Firefox would hang up saying the script had timed out and asking if I want to stop it or continue. Didn't matter which option I chose nothing would happen. The only way to stop it was to close Firefox and restart. Tried restarting the computer. Still wouldn't install. Tried installing the Outwit add on and got the same error leading me to conclude it was a problem with Firefox, not the add on. I found this help page <http://support.mozilla.com/en-US/kb/Unable+to+install+add-ons?s=addons+won't+install&as=s> and did everything it told me to. Finally at the end I got to "Corrupt extension files". I foolishly deleted the files you told me to and now Firefox won't even start! I tried reinstalling Firefox and it still won't start. Tried restarting the computer. I have no idea how to get back to where I was let alone install the add ons I wanted to install. Please help. At this point I'd just be happy to be able to get Firefox working.

See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
Create a new profile as a test to check if your current profile is causing the problems.<br />
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)<br />
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Corrupt LOG File MaxDB 7.5 (Netweaver 04)

At the Installation the LOG went full. LOG-Mode = SINGLE.
Then I have added a new LOG File. Nothing happens. After rebooting the maschine,
the database doesnt come up, in krnldiag there is following:
2004-11-14 22:46:30 7579     11000 vattach '/sapdb/XI3/sapdata/DISKD0001' devno 1 T58 succeeded
2004-11-14 22:46:30 7520     11597 IO       Open '/sapdb/XI3/saplog/DISKL001' successfull, fd: 16
2004-11-14 22:46:30 7633     12821 TASKING Thread 7633 starting
2004-11-14 22:46:30 7632     11565 startup DEVi started
2004-11-14 22:46:30 7520     11597 IO       Open '/sapdb/XI3/saplog/DISKL001' successfull, fd: 17
2004-11-14 22:46:30 7634     12821 TASKING Thread 7634 starting
2004-11-14 22:46:30 7633     11565 startup DEVi started
2004-11-14 22:46:30 7579     11000 vattach '/sapdb/XI3/saplog/DISKL001' devno 2 T58 succeeded
2004-11-14 22:46:30 7520     11597 IO       Open '/data2/sapdb/XI3/DISKL002' successfull, fd: 19
2004-11-14 22:46:30 7635     12821 TASKING Thread 7635 starting
2004-11-14 22:46:30 7634     11565 startup DEVi started
2004-11-14 22:46:30 7520     11597 IO       Open '/data2/sapdb/XI3/DISKL002' successfull, fd: 20
2004-11-14 22:46:30 7636     12821 TASKING Thread 7636 starting
2004-11-14 22:46:30 7635     11565 startup DEVi started
2004-11-14 22:46:30 7579     11000 vattach '/data2/sapdb/XI3/DISKL002' devno 3 T58 succeeded
2004-11-14 22:46:30 7579 ERR    30 IOMan    Log volume configuration corrupted: Linkage missmatch between volume 1 and 2
2004-11-14 22:46:30 7579     11000 vdetach '/sapdb/XI3/sapdata/DISKD0001' devno 1 T58
2004-11-14 22:46:30 7520     12822 TASKING Thread 7631 joining
2004-11-14 22:46:30 7636     11565 startup DEVi started
2004-11-14 22:46:30 7631     11566 stop     DEVi stopped
2004-11-14 22:46:30 7520     12822 TASKING Thread 7632 joining
2004-11-14 22:46:30 7579 ERR    16 Admin    RestartFilesystem failed with 'I/O error'
2004-11-14 22:46:30 7579 ERR     8 Admin    ERROR 'disk_not_accessibl' CAUSED EMERGENCY SHUTDOWN
2004-11-14 22:46:30 7579     12696 DBSTATE Change DbState to 'SHUTDOWN'(25)
Is there any way to delete the corrupt LOG files in order to add new one? The data file is ok.
Thanks
Helmut

Thread was also opened on the Mailing list:
Here is the answer
Hi,
in most situations an "add log volume" does not solve
a log full situation, because the added logvolume is
accessible first at the moment, when the write position
on the log is at the end of the old logvolume.
If a LOGFULL occurs, the save log!
All "parts" of the LogVolume are numbered and each one
has stored the identifying number of it's predecessor and
it successor in it's header-page. The message
     "Linkage missmatch between volume"
means, that these values does not match any more.
Did you somehow changed the contents of this file/device?
If so: can you revert the change? Then the restart should
work again. do a logbackup and your database will run again.
If this doesn't work for you, you could patch the
header pages of the logvolume (I assume you do not really
want this).
Another way to solve the situation is to do a data backup
in admin-mode, reinstall the database and recover the
databackup, because the removal of a logvolume is not
supported.
kind regards, Martin

My Vista system crashed due to a corrupted windows file. When I reformatted C:/ & reloaded firefox & tbird, my bookmarks were gone. I have an image of the drive , but I don't know how to recover them and get the data back where I can access it.

Vista system crashed due to a corrupted system file. The C drive was reformatted, and windows reloaded, along with the rest of my programs.
Before the drive was reformatted, an image was made of it on a USB drive to save all the data. Now I need to know how to get the Bookmarks back for Firefox, and the Address Book back for Thunderbird.
Thanks

Thanks for the quick response. It worked very well, for both Firefox and Tbird.
One hitch, until I remembered: those are all hidden files, in hidden folders. I had a devil of a time finding the "roaming" folder, until I found out how to unhide everything. In years past, I used DOS for that kind of thing. Explorer is much less user-friendly. Now that I know how to do it, it's simple.
Thanks again for the guidance

Installed Photoshop cc 2014 asks for serial # - corrupted Windows file permissions

More of a warning / heads up to all than a question - installing Photoshop cc 2014 [via the CC manager app] caused some Windows file (security) permissions to become corrupt corrupt on my system. Symptoms include cc2014 asking for serial number validation on startup (when, as a cloud version, it should not do so), then being unable to connect to the internet when you press the 'validate serial' button so getting that window into infinite loops, and - a real pain in the *** when trying to fix the above - causing abends of some windows shell functions that in turn cause windows explorer to crash and restart.
Anyhow, digging into this (fortunately, I am a long time Windows SysProg) I discovered that for reasons unknown, either the CC master app or the actual Photoshop cc2014 installer (or both) are changing file access control permissions on a number of files, mostly DLL's. Most of the files affected are in the (normally hidden) Program Data directory on the windows root disk, Some of them are in the Adobe subdirectory - so fair enough if they want to fool around with their own program - but others being changed are in the Common Files and Microsoft subdirectories. I cannot for the life of me figure out why this is necessary nor why Adobe feel the need to touch files that 'do not belong' to them - something dangerous in the extreme as an external app such as Windows Update might replace or 'repair' the files so touched, and if Adobe / CC are relying on file permissions on non-Adobe files, such changes could result in all manner of random and spurious problems / error messages occurring.
Anyhow, if, fellow Photoshop cc 2014 user, you get this happen to you then you can fix the file permissions by opening a console window [also called a "DOS box", or "command prompt" depending on your age and knowledge... 8-) ] and run the windows file checker with the command
"sfc /scannow". Make sure that you use 'run as administrator' to open the console window, or you'll get an error about sfc only being available to administrators. Also a very (very) sensible idea to close all non-essential running applications first to prevent any possibility of weird interactions happening.
Finally, check that the 'hosts' file in [root drive]:/Windows/System32/drivers/etc is valid - for some reason, it looks like the install tried to check or update this file (again, I have no idea why) but the result was a corrupted hosts file, which I assume is the root cause of the 'unable to connect to host' type internet error messages. Copy the file, rename it as 'hosts.txt' and edit it with notepad or wordpad. Look for lines containing garbage strings at the bottom of the file (any line that starts with a # ignore, it is a comment, and any line that has IP addresses or host names should be ignored - though if they reference a site such as "someserver.adobe.com" you might want to treat them with suspicion if you continue to get internet 'cant connect to site' type errors.
Anyhow, when I fixed these two sets of problems, Photoshop cc 2014 started 'right first time' without all the BS messages about serial numbers etc.
Hope this helps somebody out there in AdobeLand......
Rick

Update: I tried several times to reproduce the error, actually it dosen't occur. I changed nothing on my system, without reboot it twice. This is what I said in my beginning times: it occurs sometimes but often. I will keep you up to date.

KB2878233 corrupts PowerPoint file type associations (bis).

Dear,
I posted the question below a week ago in the Office forums on answers.microsoft.com, but did not receive any reaction. Allow me to repeat:
Installing the KB2878233 security update corrupts the file type associations for PowerPoint files in the following environment: Windows XP SP3 ("fully" updated) / PowerPoint
Viewer v. 14.0.7015.1000.
PPT files get associated with MOC.EXE for opening them. Uninstalling the update does not restore the original associations. The problem can be alleviated by repairing the PPT Viewer installation manually.
Question: can this High Priority security update please be re-released through Windows Update without the corruption effects?
TIA.
Kind Regards,
Jan J.
Brussels, Belgium

Hi,
We can try to change the file associate in Registry key:
For all users on this computer, please change associate program of the .doc or file type you would like to under
HKEY_LOCAL_MACHINE\Software\Classes.
For current user account, please change associate program of the .doc or file type you would like to under HKEY_CURRENT_USER\Software\Classes. If there is no such extension, please create new keys for it.
Hope these could be helpful.
Kate Li
TechNet Community Support

My Adobe Illustrator is CS6 and it corrupts the file if I save it using accents

My Adobe Illustrator is CS6 and it corrupts the file if I save it using accents. How do I fix this?
I mean, if I save a file called "crachá" I'm using an accent on "a" so it showed as "á" but if I do this Illustrator says the following error:
"The file may be read-only, or another user may have it open. Please save the document with a different name or in a different foulder"
and when I try to open it says:
"The file "Crachá.ai" is in an unknown format and cannot be opened."
So, my solution is to create a new file and call it "Cracha", without the accent. But it never happened before. How can I fix this legitimately?
Thanks.

As for the resolution problem: upsampling an image doesn't improve its quality, because there's simply not enough information there.
As for the warning you get: it's most likely caused by RGB color mode or by placed RGB content that interacts with other content in the file (e.g. because you applied transparency)
In English it's this one:
As far as I see it there's no alternative to learning the basics of printing, color management and transparency. This is nothing that can be done by some forum posts.
Printing:
http://rufus.deuchler.net/2011/06/adobe-publishes-a-new-creative-suite-555-printing-guide. html
You need to understand what's happening on conversion of RGB to CMYK color space, which will happen when printing to offset presses. When you print on office printers, something else happens and all kinds of color may come out, because these machines sometimes do their own color correction and everything depends on how you set up the machine.
Provided you check the PDF in Acrobat: you need to set up color management there as well. This might lead to the differences (greenish) you're seeing.
Find a good book on color management and read the manual:
Creative Suite * Understanding color management (there's more about the subject)
As for transparency:
http://partners.adobe.com/public/asn/en/print_resource_center/Transparency-DesignGuide.pdf
http://partners.adobe.com/public/asn/en/print_resource_center/TXPGuide.pdf
Before sending files to a print service provider you need to get information on how they need the file. Most providers won't accept PDFs generated with "No color conversion". Or they won't guarantee for the output.
What you see on your monitor won't necessarily match the printed result unless your system is correctly calibrated and color management set up. And even then there might be differences.
Can't you contact this former colleague, pay him an amount of money and let him teach you the tools of the trade?

Corrupt CAB File

Hello,
I hope I have placed this in the correct forums here on TechNet. I have a corrupt CAB file and am looking on ways to correct it. We use WINRAR to open CAB files. When I attempt to open it via WINRAR I am being told "The archive is either in unknown
format or damaged." I have multiple CAB files generating this error, but not all of them.
Does Microsoft have a tool, or does anyone have any experience on the best way to repair these CAB files? These CAB files contain archived emails we are using with our Enterprise Vault system.
Thanks for any assistance!

What software creates the CAB files? (rhetorical) I'd contact their support for solutions.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Corrupted pack file: magic/ver = CAFED00D/160.1 should be CAFED00D/150.7

Similar Messages

Maybe you are looking for