Cost allocations with business area info

Hi Expert,
Is there any way to allocate cost to cost centers, including business area ? i understand that the standard allocation process in SAP do not allocate to business area. How about manual cost allocation posting ?
Thanks.
Angel.

Hi,
I have the following scenarios.
Scenario No. 1 (allocate cost within same cost center but different business area)
Cost center A with Business area 01 - $1000
to allocate the cost to :
Cost Center A with Business area 02 - $500
Cost Center A with Business area 03 - $300
Cost Center A with Business area 04 - $200
Scenario No.  2 (allocate cost in same business area to different cost center)
Further allocation base on scenario no. 1
Cost Center A with Business area 02 - $500
to allocate the cost to :
Cost Center B with Business area 02 - $300
Cost Center C with Business area 02 - $100
Cost Center D with Business area 02 - $100
Please advise if there is a solution on the above.
Thanks.
Angel.

Similar Messages

  • How to relate cost centre with Business area in MIRO

    while doing posting in MIRO, the cost centre picked against one of the entries in GL account line  is of another business area(of second plant). why its so? and how it happens.?how we can rectify it?
    in FS00, the default cost centre assigned is of first BA(business area) so when we do miro with PO of first BA then its alright, but when we do miro of second BA PO then the cost centre picked is of first BA. so how we cam similarize the cost centre with PO of respective business area?\
    so that when we do miro , the cost centre is picked automatically with related BA

    Hi
    In that case you can remove the cost center from FS00 and make entries in OKB9, under account assignment select option - 2 - BA is mandatory.
    Regards
    Amit
    Edited by: Amit Sathe on Nov 8, 2008 12:55 PM

  • Cost centre without business area

    Hi All,
    I have document splitting with business area and profit centre mandatory, along with this i have configured business area wise FSV in OBY6.
    We have  configured 10 business areas and 5 profit centres, but i have  created cost centres without business area and i dontwant to create cost centres with business area becoz junk master data in system and no control to users. also i have done configuration in OKB9 for automatic posting expences account with the combination of valuation area-business area- & cost centre, but when we are posting any financial document though MM or SD transactions like PGI or MIGO for service, system is not allowing to post financial document without business area cost centres. Error "Business Area XXXX / Cost centre XXXX is not assigned".
    After all analysis i came to know that, if we have cost centre with business area then only we can move with this set of configuration. Is it right?
    In No. what need to be done. basically we dont want to create cost centres for all Business Area
    Thanks in Advance,
    Sahil

    Hi,
    If you are not ready to maintain BA in CC master you should write Substitution / you should maintain derivation rule for deriving business area.
    Regards,
    Viswa

  • Error : Profit Center does not match with Business Area. Message no. ZGLTFI

    Hi Everyone,
    Error occurs when doing inbound PGR. Processed done so far are the following:
    Normal PO created & released.
    Inbound created
    Transfer order created and confirmed.
    When doing PGR via VL32N > click Post Goods Receipt error occurs
    Profit Center does not match with Business Area
    Message no. ZGLTFI0001031
    Checked already in KE53 the Profit Center used was assigned to the Co. Code used in the PO.
    The same Profit Center was maintained in material master.
    The Plant used was assigned to proper division and business area.
    Any other ways to check?
    Btw not only in Inbound PGR the error occurs .. also happened in MIGO and MB1C.
    Tried to do other transaction involing the material, plant and profit center all give the same error.
    Any info shared is much appreciated.
    Thank you.

    this error is not a SAP standard error, it is an own message class (ZGLTFI0001), so it must be issued from a validation or user exit.  Please find the user exit, or talk to FI Team and ask what they check

  • Problem with Business area

    hello,
    any body please help me.
    previously i have configured with business area.  every thing working fine. but my client decided to work  with profit center. then i have made changes with profit center, means all assignment i deleted. I changed all assignments in OKB9 changed to profit center. i have deleted business area assignment with sales area and plant.
    but when i am creating sales order it is asking business area. even i am doing stock posting with movement type 561 it is giving the same message. so please let me know where i am doing wrong.
    Thanks & regards
    Bhakta

    Hi,
    in the "global parameters" for your company code, uncheck "Business area fin. statements".
    Also make sure the field status groups you use for your accounts don't specify business area as a required field
    Regards
    Nikolas

  • How to update the posted documents with Business Area wise

    Dear experts
    Please suggest me how to update the posted documents with Business Area wise
    Ajeesh.s
    Moderator message: please do more research before asking, show what you have done yourself when asking.
    Edited by: Thomas Zloch on Nov 2, 2011 2:26 PM

    Hi,
    Select all your folders in Disco Administrator,ALT+ENTER to go to properties, then change the database from the default database to the remote database.
    Hope that helps,
    Rod West

  • Retained Earnings Account with Business area

    Hi SAP Friends,
    how has the system calculating the retained earnings balance for separate bus areas when we c/f balances?
    Where we can get the retained earnings account with business area
    Thanks & regards
    Amar

    Thanks lot for your quick response Mr. Ravi Sankar.
    Then after excuting the carry forward balance, where we can get the retained earnings report with business area.
    Thanks & regards
    Amar

  • Restrict the transaction authoriztions with Business area

    Hi All
    I want to restrict the access of transaction PCP0 with Business area.
    Please suggest me for the same
    Regards
    Aditi Singh

    The standard SU24 settings for PCP0 allow restricting the authorizations based on funds management areas using object
    F_FICB_FKR Cash Budget Management/Funds Management FM Area
    But there is not authorization check for business area in this transaction. You can alter the ABAP code for an authority check for business area using some user exit and a custom authorization object.

  • Allocation of cost from one business area to another business area

    Hello friends,
    Client Requirement: They have 5 business areas. one is for Head office and other 4 are business operations. Their head office expenses are booked under various cost centers in H.O Business Area. Now they want to allocate all H.O expenses to other business areas where business operations are carried on.
    currently all allocations are made manually. now they want to incorporate in SAP.
    is it possible to allocate the expenses which are booked under one business area to other business area???
    pls give your ideas for how to allocate those expenses.....

    They didn't have profit centre. so i cann't go for that option
    Each operation area has many cost centres and internal orders... i have to allocate the costs from the cost center to internal orders.... if it is a same business area there is no problem we can create assessment cylce and allocate the cost.... the problem comes only when the allocation needs from one business area's cost center to other business area internal orders
    for that the solution might be create Secondary cost element As you said and by using assessment cycle we could allocate the costs...
    vijay

  • Overhead Cost Allocation - with IFRS

    Hi Gurus,
    We have configured Leading Ledger for reporting in IFRS and a non-leading ledger for local (India) Reporting.
    As this implementation is being done by our Overseas parent company - we are using  template allocation for Overhead cost allocation.
    However, we want to allocate expenses based on actual consumptions rather than on Process Output quantity. ie. for  example - electricity charges we want to distribute based on actual no of units consumed by each department/machine/process.
    Kindly advise, If there a possibility for having both methods in the system (automatic) or manul process for achieving this.
    Thanks
    Sree.

    Hi Expert,
    There is no such feature to Allocate Overhead Cost with Ledgers.
    No need to Allocate Costs or Overhead Costs with respect to Leading Ledger - IFRS.
    By default, the Costs or Overhead Costs are allocated to Leading Ledgers.
    Regards,
    GK
    SAP

  • Tax amount line item with Business area in Billing Doc generating to A/cing

    Hi,
    While generating the Billing Doc, for the Tax amount line item , the Business area shd be populated. How this can be done? while  for the othter line items it is displaying but not for the tax amount line item.

    In ECC 6.0 with document splitting and new GL business area would be available in the general ledger view for tax postings. For earlier versions than ECC 6.0 use balance sheet adjustment program SAPF180 to populate business area for tax items.
    Thanks and regards
    Kedar

  • Error with Business area and profit center

    Hello Guru's,
    I have an issue when posting the stock through t-code MB1C and 521 movement type. We have assigned business area and profit centers for plants as below:
    For Plant 1000,
    Business Area:       1100
    Profit center:           1100
    And For Plant 2000,
    Business Area:        1200
    Profit center:             1200
    But when I am assigning plant 2000, and assigning business area and profit center as 1200 respectively. System by default is picking as 1100 with a warning message.
    Please help this resolving this issue, I want the system to take the correct assigned BA and Profit center.
    Regards,
    Varun Siddharth

    Hi Varun,
    One of the possible ways is, to assign a business area to the cobination of Plant and Division in OMJ7 (Assignment is possible for other combinations as well). Later you can define a substitution rule so that, a profit center is substituted to the combination of Plant and Business Area.
    Hope it helps you.
    Regards,
    Ravi Kumar

  • SEM-BCS how to make Consolidation Unit with Business Area

    Hi all,
    I am newbie in SEM-BCS and implementing BW-based BCS. Our situation is as follows.
    Situation
    - we have 7 companies worldwide and 4 different Business areas.
       Every company consists of at least two business areas in R/3.
    - we have sales transaction in FI among companies.
    requirement
    - we need consolidated F/S in whole consolidation group and consolidated F/S in Business area level.
    actually, we are planning to make the consolidation unit in company level.
    Do we have to break down consolidation unit in business area? or just breakdown category solves our requirement?
    If we have sales transaction even between business areas within certain company, do we have to make it in business area?

    Following are the answer to your questions…
    Q:   What to do for using this cube in BCS?
    A:    Add the business area to the cube. Generate the data basis and the business area gets added to all ODS/DSO , virtual cube.
    Suggestion: To avoid deleting the Profit center cube, since you can reduce the complication.
    Q:   Is it the problem about DATA BASIS Role?
    A:   No. Assign the role of subassignment or consolidation unit as needed. If you are giving the role of consolidation unit to business area, you need to insert the char Partner business area also in the cube.
    Q:   Is there some materials to solve this situation?
    A:   Refer the matrix consolidation material in help.sap.com from BCS portion.  As per SAP literature any relevant object can be made as second consolidation unit such as business area, functional area etc. Don’t fear. Once you start it the issue will be resolved in few days.
    Expected complication:
    If you are going to make business area as subassignment then it is simple. But if you are making business area as Consolidation unit, go for partner business area in cube.
    Ensure with your BI consultant that all BCS messages are addressed in BI infoobject for business area specifically.
    Things can get complicated only if we allow for it get complicated. But you are doing great.. Keep  posted.. Good luck.!!!..

  • Upload Manual bank statement with business area

    Hi Gurus,
    Business area is required field. While uploading manual bank statement through ff67, how can system identify the correct business area? Is there any option in which we dont have to enter business area manually while uploading?
    Please revert.
    Thank You

    Hi,
    The copy paste does not work in FF67. Only first column gets copied and then you have to copy paste column wise. This is limitation is SAP standard transaction and is not modifiable.
    LSMW will not help much as the records to be uploaded in the same statement and paage down can not be handled in LSMW.
    Your ABAPer need to record the transaction in SHDB and the can create a custom program to upload the excel using that recording. This is easy for programming point of view.
    Regards,
    Gaurav

  • Cost center assinment to business area  very urgent

    Dear all
    i am doing business area wise balance sheet and profit and loss account assign ment for company code (which is already having existing data ) for this co code
    so for company code is not using busineess ares now they are going to introduse new business areas.
    when i new business area in cost center it is throwing this error
    Field change Business area is not possible (transaction data already exists)
    Message no. KS 134
    Diagnosis
    To ensure the consistency of existing data, you can only change object Business area if no transaction data exists in the change period; that is, neither plan data nor actual data has been posted.
    As transaction data already exists, it is not possible to change objects in this time period.
    Procedure
    If you still want to change the object, select a suitable change interval by choosing "Edit -> Analysis period...".
    arroding to procedure if i  go to Edit /Analysis period the error is
    field change business area is not possible (transaction data already exists )
    please guide me
    regards
    sadiq

    hi karl,
    u are corrct about the KS 134 and  RKACOR06 pogramm. i am not talking about this situation .
    hear the author posted the docu ment thread wher till now ther company is not using business areas . now they created new business area (eventhough till now they are not created thats why TGSB error is coming). for that only i said we can creat new anlysis period  with assiging of business area in cost cenetr master screen .only for new analysis period only
    not for existing transaction data posted period.
    i think my communication may confused u . sorry for that.
    any how
    thank you very much for ur input.
    kaindly inform the author in this way for new analysis period with business area.

Maybe you are looking for