Cost center SKH/SK0305PO05 does not exist on 29.02.2012. Message no. KI222

dear Experts,
I am making Gr means Release Gr blocked stock for subcontracting po,i geting the error,
,but the cost center i created is in other controlling area,the same cost center i can
not create now,please suggest me.why this message is coming? can i change cost center
here.
Regards,
Varun

HI,
check following sap note
SAP Note 16653 - How is the validity of the cost center checked
and take the help of your CO and FI consultant for same
check following link also
[http://forums.sdn.sap.com/thread.jspa?threadID=1930191]
Regards
Kailas Ugale
Edited by: kailasugale on Feb 29, 2012 9:35 AM

Similar Messages

Profit center 1000/9999 does not exist for 21.10.2008-Message no. KM026

Hello
I am trying to create Inquiry through T-code VA12 but when I am assigning Project with it pop up error
Profit center 1000/9999 does not exist for 21.10.2008
Message no. KM026
Diagnosis
The desired profit center 9999 is not in the master data table for the specified date.
Procedure
Check your entry.
Note: The profit center is usually derived from the original account assignment object (cost center, order, and so on) or other information (such as the material number).
If necessary, create the desired profit center for the appropriate time frame.
Initially in this system dummy profit center activated but I now I donu2019t want dummy profit center so I changed master data date but now I am getting this error.
From were this (9999) dummy profit center is picking.
If some body has Idea let me know

Dear,
Go to tcode KCH5N select ur profit center on the right side u will find the validity period button click it to check. . If the posting is taking place within the validity period no issue else extend the validity period..
To check the period closing t.code is MMRV
To close the period - MMPV
If the problem still exists, then please go to KE53, give the respective profit center in which the material is assigned and enter.
There you can see the validity period for that profit center and I presume the validity period is ended before the creation date. Check that.
Regards,
R.Brahmankar

Profit center 1000/N999 does not exist for 10.05.2009

Hi Guys
I am try to post a goods issue. But this error keeps coming up.-
Profit center 1000/N999 does not exist.
Can anyone help.

Hi,
This problem will be resolved by maintain the material in a particular plant. It happens because of intercompany transaction. Take any one of the successful material in the sales org( you are trying to post goods issue) and you can see a specific plant to that material in that sales org. So create your material also in that plant. It will not give the error.
Regards,
Satya.

Profit center US01/ TP3870 does not exist for 03/23/2011

Hello Team,
Our Profit Center is 6045TP3870 but when SD guy is releasing SD document for Account at VF02, he is getting below error,
"Profit center US01/ TP3870 does not exist for 03/23/2011"
I don't understand why the system has taken part of Profit Center only. Profit center 6045TP3870 is well exist for 03/23/2011.
I have checked the Material Master when the profit Center is correctly maintained.
Can any one help to resolve this issue.
Spandana

Hey Spandana,
Make sure the profit center is active, and if it is, check for relevant validations and/or substitutions with user exits.

Profit center 1000/1400000023 does not exist for 21.07.2009

Hi Gurus,
When i am posting billing document i am gettting error message "Profit center 1000/1400000023 does not exist for 21.07.2009"
Pls help me how to solve this problem.
Thanks & regards
Srinivas.N

Dear Srinivas,
The validity date of Profit center is finished.
Go to KE53 and check the Dates for the Pofit center whether its valid or not.
If its not valid, Go to KE52, Change the date, actiivate the Profit center. ( i guess it will be done by FI Consultant) .
PS: Please search the forum before posting the question, you will get lots of handful materials...and dont post same question in multiple forums.
Thanks,
Raja

CR068 Work center category Z006 does not exist

In Customizing transaction 'OP40', I inserted the application 'N' (Networks) for setting the task list application of a work center category Z006 to be used in PS (Project System)
Three weks ago I used transaction CR01 to create some work centers with Z006 category to be used in networks of a Project with no problem; but now I want to create another work center with transaction CR01, and I get the error message CR068 Setting:`Work center category Z006 does not exist' although the work center category has been maintained.
This work center category was not deleted in customizing, I can see the last work centers created in table CRHD.
I followed the steps described in the SAP note 15657 - (Setting the work center category is not permitted) of course using the task list application N.
I would like to get some help.
Regards.
Rafael Di Giovann T

Hi,
Do you have authorization to see OP40 customization in that client, if yes, then kindly check and confirm whether configuration with respect to Z006 is still there in that client or its deleted/ overwritten with some valuable changes. The work center that had been created in past will definitely be there in CRHD table/ system irrespective of the configuration changes to their work center category.
Regards
Avisek Bhardwaj

Profit Center does NOT exist on 08/24/2010 (Message KM700)

Hello,
I am using resource related billing.
I am adding a Contract Line Item to an existing contract.
In this Contract Line Item I am entering a wbs element for whichc the associated profit center has an effective date
of 01/01/2011.
The Contract Header has a document date of 08/24/2010
After entering the wbs element in the new contract line and hitting enter I receive the below warning message:
Profit center ###/##### does not exist for 08/24/2010
Message no. KM700
###/##### = Controlling Area/Profit Center
Is there a setting that can be switched off so that the warning is NOT displayed ?
Thanks
Ermanno.

If it is warning message, the user can leave as it is. If it is error then in t.code KE52, you can change the validity period by clicking the change validity period button. Change here validity period from date 08/24/2010, thereby you can avoid this message.
Does this answer your question? If not why you want to remove the warning message? It looks it is standard message, used by more than one program.
Regards,

Profit center 1000/DUMMY does not exist for 20.06.2011 KM026 - Asset postin

Hi Friends,
While posting asset opening balance (transaction type 100), we are getting the error 'Profit center 1000/DUMMY does not exist for 20.06.2011' for one company code. (not for all company codes. It is giving error to only one company code).
We don't maintain this dummy profit center as we have doc splitting activated for all the compay codes. So, master data for dummy profit center is not there in the system for all the company codes. But all the company codes are working properly except one company code. It is giving dummy profit center error.
Please could any one advice?
Thanks in advance.

Hi krishna Kumar,
I guess you are in ECC 6.0 version or above 5.0 version.
Up to 4.7 the profit center accounting was a part of Controlling. But from ECC 6.0 ( Enterprise Centrel Component) the profit center accounting is part of FI.
Regarding the error mentioned by you, you have activated profit center accounting from CO module, and you have assigned the number ranges for Profit Center Accounting, this means for the documents with the profit center account assingment system will generate 1 FI Document and 1 profit center document.
So wherever system is not able to find the profit center it will try to post the document for dummy profit center.
As per my experience with ECC 6.0 we need not activate and assign the number ranges for profit center documents.
Except OKE5 settings no other settings are required for profit center.
The above all is if you dont want to use classic profit center accounting. So first please check your requirement and take the decision.
thanks & regards,
shashi kanth.

Tax code V0 does not exist for jurisdiction code IN00 Message no. FF718

Hi,
i have configured as per suggestion in message as well as assign Jurisidiction code in taxcode in FTXP, but when i try to create PO with tax code V0 and jurisdiction code IN00 then we are facing error "Tax code V0 does not exist for jurisdiction code IN00 Message no. FF718"
please advice me and help to resolve this issue is any config missing pls guide me.
Thanks
Best regards
Shital D

Please check this answered link:
Juristiction code - Error: FF718
Cost centre
Edited by: Afshad Irani on Jun 22, 2010 7:05 PM

Network Activity - Timesheet: Work Center in plant does not exists

Hi All,
While doing Timesheet entry against Network and Activity in CAT2 transaction Code, I come across one scenario in which If I use copy function then one error message appears as " Work center XXXXXXX in Plant XXXX does not exists"
But same combination gets worked if I put manually and do not use copy function.
I think system checks copied entry plant with new entry Plant.
Is this system inconsistency ? If so what may be the probable solution ? OSS Note ? Exit ?
Please suggets to rectify this wrong validation message.
Many thanks in advance.
Swapnil Kharul

Hi Swapnil,
You can check following points once again.
1.Check your Network Actvity details:
Work Center/Plant : 1000/1300
Work 10 (hrs)
Activity Type :11000
DistKeyCapRqlnt:SAP020
Also Status of activity :whether it is in PCNF or CNF.
and in Network Header: check Capacity Requirements.
2.In CR02, check whether the work Center and Plant Combination.
Plant:1300
Work Center:1000
Goto Costing Tab: Note the following:
Cost Center: 4295
Actvity Type Int Proc(Bottom Field):11000
Formulae:SAP008
3.Check in KP26/27, whether Cost center has been
assigned to Activity Type for the period (or else entire Fiscal year).
Version:0
From Period:6
ToPeriod:6
Fiscal Year:2010
Cost Center:4295
Activity Type:11000
with this combination whther rate has defined or not.
Plan Actvity/Fixed Price/Variable Price
4.And also CAC2, don't hide any field in all screen Groups of your data entry profile.
Now Pl. let us know the results.(all values considered here are for your understanding)
Vemula

Country Grouping does not exist for tax year 2012 01

I get this error when simulating payroll for period 01 in tax year 2012. I use the South African payroll.

Would that be because payroll period does not exist?
You can use the report RPUCTP00 (Generate Payroll Periods) Check this out:
[http://help.sap.com/saphelp_45b/helpdata/en/35/a47c3c763e0392e10000009b38f9b7/content.htm]
Otherwise, please specify more, message class, where it occurs in payroll process... etc..
Hope it helps.
Regads,

Profit center 1000/00000208A0 does not exist for 13.06.2008

Hi All,
My user encounter this problem when try to release to accounting for a billing via VF02
The actual profit center is 208A03 but the msg show is 208A0
Where should I check for this problem ?
This is a new profit center.
Thanks in advance.
Janice

Hi,
Could you please tell us the message number and message class.
Thanks and regards,
Priyajit

Cost Center does not exist

Hi,
I have called "BAPI_GOODSMVT_CREATE" to have the goods issue, the posting period of MM and FI are opened but the it returned a message Cost center XXX /1101019 does not exist on DD.MM.YYYY .
Any transaction I need to run for the cost center?

Hi Chung,
Check if that Cost center exists. i think CC is 1101019.
Use txn code ks03 to display the cost center. If its there..then check the validity date for that cost center.
Hope it will give u some idea.
Cheers,
Vikram
Pls reward for helpful replies!!

Getting Cost Center Does not exist error when executing BAPI_ACC_GL_POSTING

Hi Champs,
I am getting Cost Center Does not exist error when executing BAPI_ACC_GL_POSTING_CHECK.
But when I checked for the particular Cost center, it is mapped to the same company code the program has got executed.
Example:
Cost center 1000/150402 does not exist on 17.11.2009.
Cost center 1000/150402 does not exist
Cost center 1000/150402 does not exist on 17.11.2009.
Cost center 1000/150402 does not exist on 17.11.2009.
Please let me know if you have any guess on this. It is very critical issue for me.
Thanks for all your help in advance.
With Best Regards,
Ravi kanth Yechuri

Use 0000150402 not 150402 .
Rob

Work center category does not exist in CNR1

Hi,
While creating a work center through CNR1, I am getting the error 'Work center category 008 does not exist'. I checked OP40 and the work center category is maintained there. Also the category 0008 has application maintained as Recipes.
Let me know if I am missing anything here.
Thanks & Regards,
Soumya.

Hi,
I feel so. If your using the work centre category for project managment, then, application management will be assigned to N, then you can use CNR1, which is the T code to create work centre in Project management.
In the standard system, Work centre category for project management is 006.
Pl. try creating the work centre through CRC1 for process manufacturing.
Madhava

Cost center SKH/SK0305PO05 does not exist on 29.02.2012. Message no. KI222

Similar Messages

Maybe you are looking for