Profit Center does NOT exist on 08/24/2010 (Message KM700)

Hello,
I am using resource related billing.
I am adding a Contract Line Item to an existing contract.
In this Contract Line Item I am entering a wbs element for whichc the associated profit center has an effective date
of 01/01/2011.
The Contract Header has a document date of 08/24/2010
After entering the wbs element in the new contract line and hitting enter I receive the below warning message:
Profit center ###/##### does not exist for 08/24/2010
Message no. KM700
###/##### = Controlling Area/Profit Center
Is there a setting that can be switched off so that the warning is NOT displayed ?
Thanks
Ermanno.

If it is warning message, the user can leave as it is. If it is error then in t.code KE52, you can change the validity period by clicking the change validity period button. Change here validity period from date 08/24/2010, thereby you can avoid this message.
Does this answer your question? If not why you want to remove the warning message? It looks it is standard message, used by more than one program.
Regards,

Similar Messages

Error : Profit Center does not match with Business Area. Message no. ZGLTFI

Hi Everyone,
Error occurs when doing inbound PGR. Processed done so far are the following:
Normal PO created & released.
Inbound created
Transfer order created and confirmed.
When doing PGR via VL32N > click Post Goods Receipt error occurs
Profit Center does not match with Business Area
Message no. ZGLTFI0001031
Checked already in KE53 the Profit Center used was assigned to the Co. Code used in the PO.
The same Profit Center was maintained in material master.
The Plant used was assigned to proper division and business area.
Any other ways to check?
Btw not only in Inbound PGR the error occurs .. also happened in MIGO and MB1C.
Tried to do other transaction involing the material, plant and profit center all give the same error.
Any info shared is much appreciated.
Thank you.

this error is not a SAP standard error, it is an own message class (ZGLTFI0001), so it must be issued from a validation or user exit. Please find the user exit, or talk to FI Team and ask what they check

Profit center does not exeist

Hi
We have received stock from K. C. Shah & Sons against P.O. No. 4500592514 dtd. 23.04.2007 Invoice no. 16 dtd. 14.05.2007 total 216 pcs but we are getting error in zpgr inward, error as " Profit center 1001/865401 does not exist for 16.05.2007". Please do the needfull for the same & reply immd.
If profit center does not exeist in ke53 what i want todo further steps.. for this problem.
Thank you
Anil

Hi
If profit center does not exist and you require and know that this is the right profit center then you need to create this profit center with the proper validity date i.e before 16.5.07.
If you think the profit center number shown is wrong then you need to cahneg the same in the material master assignment with the profit center which has a proper validity date.
Anand

Profit center 1000/9999 does not exist for 21.10.2008-Message no. KM026

Hello
I am trying to create Inquiry through T-code VA12 but when I am assigning Project with it pop up error
Profit center 1000/9999 does not exist for 21.10.2008
Message no. KM026
Diagnosis
The desired profit center 9999 is not in the master data table for the specified date.
Procedure
Check your entry.
Note: The profit center is usually derived from the original account assignment object (cost center, order, and so on) or other information (such as the material number).
If necessary, create the desired profit center for the appropriate time frame.
Initially in this system dummy profit center activated but I now I donu2019t want dummy profit center so I changed master data date but now I am getting this error.
From were this (9999) dummy profit center is picking.
If some body has Idea let me know

Dear,
Go to tcode KCH5N select ur profit center on the right side u will find the validity period button click it to check. . If the posting is taking place within the validity period no issue else extend the validity period..
To check the period closing t.code is MMRV
To close the period - MMPV
If the problem still exists, then please go to KE53, give the respective profit center in which the material is assigned and enter.
There you can see the validity period for that profit center and I presume the validity period is ended before the creation date. Check that.
Regards,
R.Brahmankar

Profit cener 9999 does not exist for 31.01.2010

I am getting this error when i am doing confirmation.. that Profit center XXXX/9999 does not exist for 31.01.2010.
If i check in KE52 the profit center 9999 is not found.neither in KE53..
If that profit center is not there in the system,then why is that error message says that.. Where is the prof center 9999 linkd in production ord confirmation..
Please help me out
For information: I am doing the confirmation in plant aaaa,whereas we also have a plant yyyy extended now.. Is there anyway to find whether this profit center is linked with the second plant.. If yes how can we find that out
Edited by: karthick PP on Feb 9, 2010 4:32 AM

hi,
This profit center might be coming from cost center which is defined in work center of that operation.Other reason might be work center specific cost center doesn't have profit center assignment so system is tying to post this amount to dummy profit center.Please check dummy profit center has been defined for that period?
Please let me know.
regards,
ashok

Cost Center does not exist for a particular period - Solution

We have encountered an error in the subject,
COST CENTER does not exist for a particular period
Solution:
1) Either extend the Posting period for the invoicing date
2) Or enter the Cost Center as PO number in Sales Order
Please do add your comments if there are different ways to solve this error

The Post contains a solution

Getting Cost Center Does not exist error when executing BAPI_ACC_GL_POSTING

Hi Champs,
I am getting Cost Center Does not exist error when executing BAPI_ACC_GL_POSTING_CHECK.
But when I checked for the particular Cost center, it is mapped to the same company code the program has got executed.
Example:
Cost center 1000/150402 does not exist on 17.11.2009.
Cost center 1000/150402 does not exist
Cost center 1000/150402 does not exist on 17.11.2009.
Cost center 1000/150402 does not exist on 17.11.2009.
Please let me know if you have any guess on this. It is very critical issue for me.
Thanks for all your help in advance.
With Best Regards,
Ravi kanth Yechuri

Use 0000150402 not 150402 .
Rob

Tax code V0 does not exist for jurisdiction code IN00 Message no. FF718

Hi,
i have configured as per suggestion in message as well as assign Jurisidiction code in taxcode in FTXP, but when i try to create PO with tax code V0 and jurisdiction code IN00 then we are facing error "Tax code V0 does not exist for jurisdiction code IN00 Message no. FF718"
please advice me and help to resolve this issue is any config missing pls guide me.
Thanks
Best regards
Shital D

Please check this answered link:
Juristiction code - Error: FF718
Cost centre
Edited by: Afshad Irani on Jun 22, 2010 7:05 PM

Cost Center does not exist

Hi,
I have called "BAPI_GOODSMVT_CREATE" to have the goods issue, the posting period of MM and FI are opened but the it returned a message Cost center XXX /1101019 does not exist on DD.MM.YYYY .
Any transaction I need to run for the cost center?

Hi Chung,
Check if that Cost center exists. i think CC is 1101019.
Use txn code ks03 to display the cost center. If its there..then check the validity date for that cost center.
Hope it will give u some idea.
Cheers,
Vikram
Pls reward for helpful replies!!

Funds center does not exist in FM area MOF1 and fiscal year

Hi Consultants,
I have configured the derivation strategy in FM and other relevant configurations. When trying to post a GL transaction in FI, This error message came up;
Funds center 0000412000 does not exist in FM area MOF1 and fiscal year 10/13/2010
What did i not get right.
Please reply.
Thanks.
Ekemini
Moderator: I believe, the error message speaks for itself. Please, avoid asking basic questions

Hi,
That's the message from Funds Mangement component. You have to check whether the derived fund centre is the right one and if yes, create it via FMSA transaction.
Regards,
Eli

KP90 error - KI222 - Cost Center does not exist.

Hi gurus,
While executing KP90, I got an error message saying "Cost Center xxxxxxx does not exist on 01/01/2011.
When I checked, the cost center is created from 05/01/2011 to 12/31/2011.
Please suggest any solutions....
1) Can I change the message class for KI222
2) Can I change the from date of cost center.
Please suggest as this in an High priority!!!!!!!!!!!!!
Regards,
Devang

Hi Devang,
As you can see, cost center was created some days after the date that the error message is showing.
You should create for this cost center the missing interval (01.01.2011 to 04.01.2011) and in case you create with the same data the interval will be combined.
Best Regards,
Vanessa.

Profit center is not found

Hi masters,
While doing MIRO, we are getting the error message like Profit center c.code/profit.center does not exist .
I have cheked in KE53 profit center is created and validity is also 01.01.2011 to 31.12.9999. Although i am getting the error message. Please suggest me on this.
Thanks
MDK

Ideally, this should have been posted in Financials forum.
Coming to the issue, check the following notes which may help you
1) Note 204787 - KM026: Profit center &1/&2 does not exist for &3
2) Note 978159 - Problem with profit center determination
thanks
G. Lakshmipathi

Personnel Does not Exists CAT

Hi, I created a Personnel in HR Mini Master. in CAT2 transaction , I can search & result shows new Personnel Created , but as soon as I click edit Time Sheet, It say Personnel does not exist. I tried creating Info 315 in PA30, but it said cost center does not exist in CSKS table, which infact exists. please help. Thanks and regards, Niketan Maral

Adding to It Function Module CATS_GET_BASIC_INFOTYPES is giving error for the personnel number
Thanks and regards

'Stream requested does not exist' error while importing MPEG-2 file.

Hi.
I received the following error when attempting to import an MPEG-2 file as a Timeline:
'Stream requested does not exist'
What does this mean?
Thanks,
William Johnston

Let me introduce you to the SEARCH link
http://www.adobeforums.com/cgi-bin/webx?126@@.1de98ec0
Go there and enter
Stream requested does not exist
As well as this message thread, there are over a dozen other messages you may read
If you don't find a solution... come back here and post more information
Always provide DETAILED computer and software information, including all hardware and software brand/model and version numbers, with DETAILS about the input files you are using and any output files you wish to create, plus read
How to ask a GOOD Forum question with COMPLETE information
First message gives 5 specific suggestions (you may do #5 for FREE, depending on your problem and purchase date) and then tells how to ask a question in such a manner that you provide all the information that you WILL be asked, for anyone to be able to provide an answer
Second message has advice, and links, concerning optimizing a computer for video editing
Third message concerns things that USED to work, but now do not (and more questions to answer)
Also, for Premiere Pro, check the
Wiki FAQ

The e-mail account does not exist at the organization

Hi, I have a user account that people receive the following message from:
The e-mail account does not exist at the organization this message was sent to. Check the e-mail address, or contact the recipient directly to find out the correct address.
<mailserverishere #5.1.1>"
I'ved looked and this particular case could be a quirky one.
The details are:
User account A is the account that Exchange thinks doesn't exist.
User account B is her boss.
A copy of user B's email is sent to A. (done through Delivery Options)
Senders sometime receive an email back saying user A's address doesn't exist.
(which really confuses them because they sent the email to B)
This is the only time the bounce message appears.
I've removed the forward and added it again. Still the problem.
Any clues?

You need to verify old delegates in UserB's mailbox by going to Tools -> Options -> Delegates. Remove old UserA and re-add it.
This is because of option “Delegates receives copy of meeting-related mails sent to me” is ticked with old UserA id in Delegates.
If you can't see any delegates then you have another option to delete delegates rule with MFCMapi.
- Open UserB's Mailbox with MFCMapi where UserB's outlook profile configured in online mode (not Cache mode)
- Double click the Mailbox of userB to open.
- Expand Root Container -> Top of the information store -> Inbox folder
- Right-click the "Inbox" folder, and then click "Display Rules Table".
- You can see all rules configured in mailbox.
- Delete the Delegate Rule with "PR_RULE_PROVIDER" column property shows "Schedule+EMS Interface". (this is the same option which you can set with GUI Delegation "Delegates receives copy of meeting-related mails sent to me" but stale copy is still in mailbox.)
THANK YOU! Amit Tank

Profit Center does NOT exist on 08/24/2010 (Message KM700)

Similar Messages

Maybe you are looking for