Cost Estimates taking raw material in CK40N
Dear Experts,
We are running Costing run using CK40n by selecting site & article
type:ZMTG. (Only Finished Product)
But Standard cost is displaying for ROH/VERP in CK13n/MM43.
We only want to carry out std cost run for only ZMTG article.
In Costing varinat Priority is set for "Valuation Price according to price control" so the value give is correct. But the standard price field is getting updated in material master for Raw Material.
I want to know usually whether it used to take like this, if not where i need to make changes so that it should not take while costing the finished product.
Please reply asap.
Dear Abhisek,
It does not matter if the standard field updates with cost estimate, coz it does not effect financial results at all, reason behind the price control which is moving average for RAW materials.
Secodndly, it is helpful for you to find out the price of material when cost estimate was exucuted, coz it will not change until your further cost estimate run.
Raw Materials are part of BOM, so system always calculate their prices to reach at price of finish product, but system does not post any price change document for raw materials.
Further u can confirm using tcode CKMPCD
Regards,
M. Tayyab Aslam
Similar Messages
-
Cost Run for Raw Material taking Standard Price instead of Moving Price
Hi all,
We ran a material costimate with normal components FG>SFG>RM. The RM price Control is set to
V (Moving Average Price) and for SFG & FG it is S(Std. Price). After we run CK11N, the price for
RM in Material Master changes as per Moving Price. We found that the RM Component is
costed based on Standard Price and not on the previous cost run Moving Average Price. After
certain period, if we again do cost run, the sytem is again picking up the standard price for costing
not the revised Moving Price. We have checked the Valuation Variant in the Costing Variant, where the strategy given is 1. Moving Average Price 2. Standard Price. We also tried to change the
sequence as 1. Price as per Purchase Info Record 2. Moving Average Price and 3. Standard Price and
also 1. Standard Price and 2. Moving Average Price. Our requirement is when we run the cost estimate the raw material has to pick the price of previous moving price stored in the Material Master. Kindly tell us where to set the indicator.
Thanks,
SadashivanHi Srikanth,
Problem solved. I checked the sequence in Valuation Variant and modified in Valuation Variant for Plant which I have not set previously and now the system is working correctly.
Thanks,
Sadashivan -
Cost object for raw material consumption posting
the raw material cosumption posting is done in the background when the goods issue is done. so where do we assign cost object for the primary cost element of raw material consumption account. since we create primary cost element for raw material consumption account, it will expect us to give cost object, so where we assign cost object for the raw material consumption cost element
hi
since the raw material cost is relevent for cost accounting u need to maintain primary cost elment accounts.When ever u confirm goods, the rm issue will take place automatically and will be debited to either product cost collector or production order. so u need not to assign any cost object for these consumption accounts why bcoz issues will take palce aganist a production order or product cost collector which is a cost object .
regards
siva -
What are the possible cost objects for raw material consumption postings
what are the possible cost objects for raw material consumption postings. i want to know whether it can be work order(maintenance order).
For example, you are confirming a process order and issuing raw materials to the process order, the system in the background creates the consumption posting and will by default use the process order as a cost object.
Similarly, when you are issuing materials to a work order, you will use MB1A and with movement type 261 and the system prompts you to enter the order number. If you are using movement type 201, then the system prompts you to enter the cost center and so on.
Thanks,
Madhav Nanduri -
ECC 600 - Cost Estimates for Consigned Material
We are in ECC 600and planning to implement Consigned Inventory in short time. However I am stuck with Inventory revaluation for consigned material.
Consingment Flow: Vendor ship these items against standard PO at zero price. At the consumption pricing is captured from Purchase info records.
Material valuation: We are using valuation variant 001 Planned valuation - mat. with
<b> Primary Strategy Sequence </b>
Planned Price 1
Valuation Price 1 Based On Co
Price from Purchasing Info Re
Sub-Strategy Sequence with Purchasing : Strategy Sequence
Purchase Order Price via Condition
Gross Purchase Order Price
Effective Price from Purchase Order
However when I try create cost estimate I am getting following error,
" No price could be determined for material/batch <......>/ plant <..> "
Any suggestions.
Thanks
UdayThanks for the quick response. I did maintain Purchasing info record using ME12. We do see pricing information at the time Production order backflsh. However contract and PO has no pricing information. Therefore initial GR is created with zero price. However at the time consumption against prod order, consignment material gets price from the Purchase info record. Bur consumption documents are not linked back to PO.When I try to cost these material using CK11N, SAP gives following messages,
Msg.typ Material Plnt Area MsgNo Message Text
I 1000 CK 037 Lot size 1 EA taken from costing view
I 1000 CK 776 No valid source of supply found for material plant 1000
E 1000 CK 465 No price could be determined for material/batch / plant 1000
I 1000 CK 361 Value of costing item 00001 in itemization is 0
E 1000 CK 240 Cost component split costed with value of zero
Any clue.
Thanks,
uday -
How do view previous cost estimate price in material master
Dear,
friend i want to see the previous standard estimate price of FG and SFG in material master data.i can view current and future standard price. But not the previous price so kindly anybody suggested me, is there any configuration needed for view previous price in controlling module.
Thanks
advance.You can try table MBEWH table for Material valuation price for previous periods
Or get product cost estimate number KALNR field from KEKO and use that as an input to CKIS table. Here cost is displayed as itemization -
No standard cost estimate found in material
T-CODE VF02
billing date 03.06.2011
NO STANDARD COST ESIIMATE COULD BE FOUND MATERILAL
in sale order
Pricing date 11.03.2011
Purchase order 09.03.2011
there are two items inthe sales order
our billing document for item 10
1.check MM03 costing 2
cost estimate not foundHi
Check if the material is new, you need a production orders and the valuation is standard. Perhaps you need to do the product costing. Without cost you dont have VPRS condition. Look for help from PP and/or CO consultants.
Regards
Eduardo -
Cost Estimate saving in material master.
Hi Gurus,
We have two costing variant. One standard variant(PPC1) is to update in Material master as standard price. Another one it need to update in the Tax price in material master as reference for sales. We created seperate varaint to update in tax price. But after releasing it not picking full value. Can you guide me how we do the setting to update full value in tax price in the material master.
Regards.
Ramesh.Hi
Go to OKTZ - Select your Cost Comp Str - Against each Cost Component, check whether they are marked as Relevant for Tax Price
Also, Select your Cost Comp Str and click on the Cost Component Views (Left side of the screen)
here, also mark as relevnt for Tax Price
br, Ajay M -
Deleting the released cost estimate -reg
Hi,
I have created std cost estimate for one material through CK40N and released.
After that , I tried to delete the cost estimate through CK44 , The variant (costing name) only deleted but i could not delete the released cost estimate for the material.
No GR , sales invoice any posting were happened after releasing.
Can you suggest me, what could be the reason and how to delete the cost esimate.
Regards
KarthikeyanDear Karthikeyan,
If you want to delete the released cost estimate use CKR1,which is not recommanded,as it may create
discrepancies.
CKR1 is used to reorganize or delete the existing or the future or the previous standard cost estimates.
CK44 is used to delete the costing run datas.
Regards
Mangalraj.S -
MTO - RAW MATERIAL COST ESTIMATE
In an MTO scenario I am using configurable material I run order BOM cost estimate after sales order creation and as a result value gets updated against EK02 condition type in sales order.
For order Bom cost estimate system picks values from material master of raw materials in BOM.
Raw material has moving price in material master, I want to know
1)what price system picks from material master for cost estimate MOVING AVERAGE PRICE, STANDARD PRICE in accounting view
2)Do we run cost estimate for raw materials in MTO, and if so then at what time.hello sir,
plz help me
ne production order shows for cost element of cost of finished goods amt shows vey high the std price in material master is 71 and qty is 140 but it is not showing with this multiplication it is in lacs.
in the production order the target cost is zero and total actal cost in lacs and total variance percentage is 0 only but as per knowledge no variance know but if u calculate 140*.71 it should come less amt as per material maser but in production order i t shows high amount
twe found that they changed the price after GR is done now we want to post JV correct?what is the procedure to post JV in the current month .
the entry at the time of G done with high value is
Finshed goods a/c dr(balance sheet item) 89 post key
COGS cr (p&L item) 91(post key)
now what is the rectification entry
Arjun -
Raw materials on MAP with split valuation used in standard cost estimate
We have a few raw materials which are purchased from different vendors and of different brands. We have opened split valuations for these raw materials. These raw materials are later used in manufacture of different finished goods. We use MAP for raw materials and Std. for finished goods. What configuration and processing steps will be required to run standards cost estimate and what will be standard price for a finished good considering the following example:
Material X is finished good
Raw Material A with split valuation @ USD 5 (brand aplha) & USD 10 (brand beta)
Raw Material B without split valuation @ USD 1
It is expected that we used brand aplha 60% of the time and brand beta 40% of the time and production batch size is usually 100 Kg.
Please reply
Edited by: Chris SAP on Sep 29, 2011 7:56 AMhi chris
Hope you have configured the material A for split valuation. while calculating standard cost estimate for the material C. through ck11n, the system will pick up the header price from material master.
But here you are saying that you have chances of using the material A, 60% of brand alpha and 40% brand beta
Instead of using split valuation use mixed costing concept. create the material A with separate Ids and create two boms one with alpha and the other with beta.
create procurement alternative in CK91N and mixed ratio with Ck94 and release the mixed cost estimate
please go through this thread also
Re: Difference between Split Valuation and Mixed Costing
Krishna -
Issue with Standard Cost estimates / Material Ledger
Background:
We have been using SAP for the last 5 years with Material Ledger active. Due to a number of reasons, we have not revised its standard cost estimates from 2001 till now. This means that at month end, we do not mark and release prices as recommended, nor do we mark prices and use dynamic release.
What Happened:
A new material called PFSW3 was made. This is a FERT. Before production
could start my team released the standard cost estimate for this material. Production was now able to proceed without problem. Then, when the time came to sell the material (VF02), SAP again raised the error 'cost estimate not found'. On checking the standard price in MM03, we discovered that the future cost estimate was missing. So we created and marked a new cost estimate in the middle of February 2007.
Problem:
When the first sale took place, SAP released the marked cost estimate and posted a Price Change document to adjust for the new standard cost. I understand this was due to dynamic release. Now, when month end came, the system settled all the production orders of material PFSW3 but did not do multi level costing on it.
Internal Investigation:
My team has determined that the material PFSW3 has price determination 2 set by mistake. All our other production materials (HALB and FERT) are
set to price determination 3 in the material master (accounting view).
Questions:
To sum this situation up,
we need to know why the material PFSW3 was not marked closed in its period status (CKM3) at the time of closing through CKMLCP?
What are the implications of not closing this material in Feb 2007 (current period status is showing 'Quantities and values entered')?
How can we close this material this month?
The future cost estimate is again missing for PFSW3 in March 2007 and I
fear we are going to face more problems as this material is sold to customers.
Please respond this is an urgent issue.Dear Shumyl,
Please, have a look at Note 645083 - Material period status set to "Closing Entry Completed" that might help to closing your material in previous period.
Hope it will be useful.
Regards,
Flaviano. -
Material Cost estimate in foreign Currency
Hi all,
We are trying to run CK11N, mateiral cost estimate for a material and its showing the error that exchange rate not maintained for CNY to JPY for exchange rate type "P".
But in quality, even without maintaining the settings, we are able to run the cost estimate.
Please let me know what could be the reason for the same.
Thanks,
Sajan C PDear Sajan C P,
If exchange rate type "P" for CNY to JPY has not been maintained in your quality system, I would assume that a component has been valuated with a price from purchasing info record. In your quality system, this price is already in local currency. Due to this, the system does not need to convert this value during calculation.
In your other system, the situation is probably different. The price from purchasing info record needs to be converted. For this reason, an exchange rate has to be maintained in OB08. You can check the currency setting of the info record in table EINE.
Regards,
Antje -
Material Cost Estimate - Release too early
Hi,
I ran the cost estimate for one material on 12.06.2008 and i released the cost estimate. Here it is saying 'Cost Estimate released too early'. I thought system is releasing the cost for material for the next month. but i want to update the material cost for this month only.
And how many days before you have to run the cost estimate for the new month.
sateeshHi Sateesh,
Please check the period which you have mentioned in CK24.
I think the period you have given is of next month. Hence system is giving that message as next month's period may not have been opened.
System allows to release cost estimate only once in a period. Normal practice is to carry out cost run at the end of the month.
Please do let me know if your problem is solved.
regards,
makrand -
Material Cost estimate error in CK11N
Hallo friend,
While I cost estimate in particular material through CK11N then this error occur as No price could be determined for material/batch 1002769-750/ plant XYZ. Even the material is maintained in BOM and Routing also. What would be the procedure for costing calculation ?
With Regards,
Samrat
Edited by: Samrat Roy on Feb 25, 2008 3:07 PMHi,,
kindly tell me urgent solution which is still pending.
With Regards,
Samrat
Maybe you are looking for
-
Touch screen on HP Envy 120 printer
My touch screen on my HP Envy 120 printer does not light up. The printer turns on and I can print from my computer but unable to scan or copy a hard copy document from the touch screen. Is there an easy fix for this or do I need to return the print
-
Hi All, While calling the receipt Un-application API, I am getting a error like' Customer Transaction Identifier has taken a precedence over the transaction number' Kindly suggest as to how can I troubleshoot this? Appreciate your valuable Inputss
-
How can i recover my photos from iMessage on my macbook pro after i forward them to myself?
I wanted to save some pictures from an iMessage Convo i had on my macbook and to save them i forwarded them to myself to my iPhone, all the sudden the convo disappears with the pictures i wanted to save. Is there a way for me to go back so i can get
-
Creating Function Module in Generic Extractor?
Hello All DO anyone has steps how to create a Functional Module in Generic Extraction? Pl let me know Many Thanks balaji
-
How to place a pdf form online?
I created a new pdf form with all the necessary field but when i uploaded it online, I could not write anything in the form fiels or tick a box