Costing Tables R12

Hi,
The following are 11.0.3 tables for costing, 'am trying to figure out their new corresponding tables in R12. If anyone will be able to pinch in any idea's or information on the same, that will be of a great help.
CM_CLDR_HDR
CM_CLDR_DTL
CM_CMPT_MST
CM_CMPT_DTL
Thanks
Ravi K

Hi Sagar,
Thanks for your reply.
I got the quantity from COEP table,by passing process order OBJNR field.
Best Regards,
Kiran.

Similar Messages

IW32 needed Plan Cost and Actual Cost table name

Hello ,
In IW32 transaction Plan Cost and Actual cost in cost tab ---Table Name.
Req: needed plan cost & actual cost table names for particular order number.( For New Report )
Can you please let me know where Plan cost & actual cost get stored in IW32 in Cost tab ( table name / function module name ) or how its get calcualted for particular order number.
Thanks in advance !
Regards
Rahul

hi ,
i too had same issue , i wrote following FS for that :
Actual and planned cost from PMCO-WRT00 to WRT12(the sum of values should be considered for actual as well as planned ) for PMCO-OBJNR taken from CAUFV -OBJNR for order number AFIH-AUFNR and also currency from CAUFV-WAERS .
Actual cost will have valuation type PMCO-WRTTP = 4 and planned cost will have valuation type PMCO-WRTTP = 1 , which will be placed in different column
hope this helps
regards
satish

Unable to join Unit Cost(Cost table) to Sales Table.

Hi All,
I am beginner for OBIEE technology.May be this question is silly for you but i am facing issue in it.I am mentioning my issue below:-
We have two tables one is SALES(Fact Table ) and second one is COST (Fact Table). I want to apply Calculation Measures on this logical tables(BMM Layer).As per Oracle document,when they are dragging Unit_Cost column from Cost table (Physical Layer) to Sales table then no logical source table is creating for them but when i am trying this then I am getting one more logical source table (COST).So my doubts are :-
1) Why is the other LST is creating for me?
2) I s there any join require between COST and SALES Table to remove this Logical source table(Cost)?
Please let me know if any clarification is require on this issue.
Thanks
Shashank Jain

it is correct. we you have two or more sources for same logical table obiee will create LTS for each source. you can't join these two fact tables physically but they will join using conformed dimension(common dim) based on physical schema design in physical layer.
Thanks
Jay.

Updating Territory_id in RA_CUSTOMER_TRX_ALL table( R12.1.1) by Using API

Hi Gurus,
I am not able to find the API for updating the Territory_id of RA_CUSTOMER_TRX_ALL table( R12.1.1).
If anybody have know about this API Please help me out.
Any help would be highly appreciated.
Thanks,
Anushka

It is Critical

"starter placer cost table" option in FPGA

Can someone explain when to use the "starter placer cost table" option in FPGA?
Steve

For others reading this, here's what we're talking about:
Here's what the Xilinx Documentation says about it (it's a map & place and route feature):
Starting Placer Cost Table (1-100)
Specifies a placement initialization value with which to begin the Place and Route attempts. Each subsequent attempt is assigned an incremental value based on the placement initialization value. Select a number from 1 to 100.
The number you choose corresponds to a cost table index and results in different Place and Route strategies. Cost tables assign weighted values to relevant factors such as constraints specified in the input file (for example, certain components must be in certain locations), the length of connections, and the available routing resources. Cost-based placement is described in the "PAR" chapter of the Command Line Tools User Guide.
By default, this property is set to 1.
Basically, it's the starting seed for the Xilinx Algorithms that try to get all of your logic in the right place on the FPGA.
So, back to your question: when should you change it? I would say almost never. I think the best time to use it is if you're running into a PAR bug that causes the compilation to hang or crash. It can help you meet timing, but you're likely going to have to do a lot (hundreds) of compilations to find the right value. Since we only let you use a random value... hitting that checkbox might let you meet timing when you compile, and then not the next time. Useful if you're tight on timing and have a final design that you're trying to get a bitfile for. Not so useful during development.
Here's a full article on Xilinx's website: http://www.xilinx.com/support/answers/35534.html

Inserting Cost Table

Hi,
I want to add different Cost rate table for a particular assignment any easy steps and secondly need also some help in making a group cost. Anyone??
Thanks,
Emil Vega

Dear Emil,
There are very simple steps in MS 2010.
to set a different Cost rate table for an Assignment:
1.Display the TASK USAGE or Resource Usage view.
2.Set a different cost rate table for a particular assignment.
- Set a different cost rate table in the cost rate table Column
a.Insert the Cost Rate Table Column
b.If necessary, reposition the cost rate table column
c.In the cost rate table column, from the cost rate table drop-down list corresponding to the appropriate assignment, select the desired cost rate table.
d.Just press Enter
-Set a different cost rate table in the Assignment Information dialog box.
a. Double-click the appropriate resource or task corresponding to the desired assignment to display the Assignment Information dialog box.
b. On the General page, from the Cost rate table drop-down list, select the appropriate cost rate table.
c. Click OK.
For Group Cost:
Group costs using the Group Definition dialog box:
1. Display the Cost table, or insert the appropriate columns in the desired view.
2. On the View tab, in the Data section, choose Group by→More Groups to display
the More Groups dialog box.
3. If you want then, select Task or Resource to specify the type of group to create.
4. Click New to display the Group Definition dialog box
5. In the Group Definition dialog box, specify the desired settings.
• In the Name text box, type a suitable name for the new group.
• Check the Show in menu check box to display the new group on the Group by submenu.
• Check the Group assignments, not tasks or Group assignments, not resources check box to display only resources or tasks, respectively.
• In the Group Definition table, specify the grouping criteria.
a. In the Field Name column, from the Field Name drop-down list corresponding to Group By, select the desired column name.
b. If you need then, in the Order column, select Ascending or Descending to sort results in ascending or descending order, respectively.
c. If necessary, in the remaining Then By rows of the Group Definition table, specify more grouping criteria.
In the Group by setting for section, select the required Group By or Then By row and specify the desired font, cell background color, and pattern to be applied to tasks or resources that match the grouping criteria.
I hope it helps you...
Regards,
Muhammad Enam Ur Rehman

Cost table in unifier

Hello,
I would like to know if there is a way to add a cost table where we can see the forecast month by month or quarter by quarter : roughly speaking, a way to associate dates with costs. I didn't found how to do it whit the cost sheet.
Many thanks in advance for your support
Thomas

The Cash Flow will provide what you are looking for. You can define the Forecast column in the Costs Sheet as your source of cost and then you can define date ranges and profile curves to be applied to the forecast.

Opening Balances for Project Costing in R12

Hi All,
What are the Open transactions should be migrated as Opening Balance in Project Costing (R12) for Projects and Tasks. Here at client place cost will come from Inv, PO, AP and OTL to Project costing (R12). Can you please explain in detail (Opening Balances & Historical Cost - How to Migrate)?
Waiting for replies...

Hi
Usually on implementation of Projects, people are migrating total historical costs per project.
Depend on your current system, you may convert the historical data summarized by project, task, expenditure organization and expenditure type. There is an option to summarize costs into the latest period, just before starting the future transactions import into Projects. Otherwise, consider summarizing cost data per period, per quarter or per year.
The summarized data may be loaded as miscellaneous expenditures into Projects.
Be aware that for converted expenditures you should setup a Transaction Source which is costed and accounted.
Dina

Bank Information in AP_SUPPLIER_SITES_ALL table (R12)

All,
My requirement is to query the bank information of all the supplier sites. When I query the 'sites_all' table, I can see the bank_account_num,bank_account_name and bank_num fields with Null value. But when I check the particular supplier sites in the UI, I can see the bank information. Can anybody let me know in R12, any other supplier table captures bank information?
Many thanks in advance,
Sen.

try this:
SELECT BANK_ACCOUNT_NAME, BANK_ACCOUNT_NUM
FROM IBY_EXT_BANK_ACCOUNTS
WHERE EXT_BANK_ACCOUNT_ID IN
(SELECT EXT_BANK_ACCOUNT_ID
FROM IBY_ACCOUNT_OWNERS
WHERE ACCOUNT_OWNER_PARTY_ID IN
(SELECT party_id
FROM hz_party_sites
WHERE party_site_name = '*<your site name>*'))

CATS-Cost table

Hi all,
I am trying to generate a new report for CATS time entries. In which table can I get the cost for the particular hours confirmation per employee (Not cost of the PM order as a whole; instead the confirmation wise cost data) Can anyone please tell which table contains this field? COEP table is not helping as I need the cost of the employee for individual PM order confirmations
Thanks & Regards,
Jegashree

Hi Jegashree,
You can get the details like employee no/name and PM order no. as well as the cost per hours from table CATSM .
In this you will get the hours per actiivty type and i suppose you must have defined the cost of the activity in KP26......
will this be useful for your query????
regds
SS

Standard & actual cost table

Sir,
I ve to create standard & actual cost report for client in PP
But i cant gate table & field name for:-POWER & UTILITY,
                                                            PACKING COST,
                                                            SALARY & WAGES,
                                                           FACTORY OVERHEAD,
                                                           DEPRECIATION
Hi gurus please suggest table names
Moderator: If it's PP, why do you ask it on Conrolling forum? Anyway, a question likes this could not be properly answered

Hi
Check the fun modules
K_VARIANCES_PARALLEL_CALC
K_VARIANCES_HIERARCHY_CALC
K_VARIANCES_OBJECT_CALC
<b><REMOVED BY MODERATOR></b>
regards
Anji
Message was edited by:
        Alvaro Tejada Galindo

Costing tables

Hi,
I have developed a product wise utility report ,in which activity cost i fetched from S027 table against a process order,plant and activity type.
But can anyone let me know from where i can get the quantity against process order,plant and activity type.
Is there any BAPI or Function modules to fetch the data.
Best Regards.

Hi Sagar,
Thanks for your reply.
I got the quantity from COEP table,by passing process order OBJNR field.
Best Regards,
Kiran.

Sales order cost table...

hi all,
i am running costing for sales order. in which table i can see the result?

Hi,
VBAK -                          Sales Document: Header Data
VBAP -                          Sales Document: Item Data
KONV -                          Conditions (Transaction Data)
KONP -                          Conditions (Item)
KONH -                          Conditions (Header)
KANZ - Assignment of Sales Order Items - Costing Objects
Regards,
Srilatha.

Order cost table

Hi Gurus,
Can any body please tell me what is the table for estimated, planned and actual costs for an order.
Regarsd
satish

satish,
Have a look at the bottom of [this|http://www.sapfans.com/forums/viewtopic.php?t=170009] post
PeteA

Plan cost table

Hi All,
I wan to prepare some z development using plan cost.Can any one tell me table in which i can get plan cost.As it varies with change in operation how to find latest cost.
Thanks
SaP learner.

Hi ,
Thanks all.Will you please tell us how you have found table.As I tried to search from field name PKOSTENKGR,data element DKGRKOPLAN could not get it.Also what are values from WRT00 to WRT16.Plan cost is appearing in WRT12.what is significence of it.
Regards
SAP learner.

Costing Tables R12

Similar Messages

Maybe you are looking for