Could Form server use the network device

Can anyone tell me?
When i used the form server, I had to type a full nework device path on the "serverArgs" parameter because my applications are on network device.<PARAM NAME="serverArgs" VALUE="module=\\servername\device\main.fmx>
When i ran the html page on web ,it will appear the message (cannot read the form \\servername\device\main.fmx) . What can i do to fix the problem?

Try changeing the DSN server. See:
iOS 5 update issues "Network...: Apple Support Communities

Similar Messages

The ipod software update server could not be contacted.the network connection could not be established

the ipod software update server could not be contacted.the network connection could not be established

Try changeing the DSN server. See:
iOS 5 update issues "Network...: Apple Support Communities

Running reports through Forms server using run_report_object produces no output.

I am running a non-parameterized report from forms on the forms server using run_report_object. The parameters being passed to the reports server through the property palette are
file name = blr_ndc_005
execution mode= RUNTIME
communication mode = ASYNCHRONOUS
destype= SCREEN
desformat=
desname=
report server= REP60_9IAS
although the report ran successfully there is no output being displayed in any browser window. Though when i change the destype parameter to 'FILE' the report runs successfully and the file is generated.
I want similar functionality to the web.show_document built-in but the purpose is to hide the username and password.
I would be very grateful if anyone could help me in this regard or let me know if this is not possible.
Thanking in anticipation,
Majid.

please check the reports and forms integration paper on otn to see the correct way to get your output from the report.

How to read XML file kept on NON-SAP server using the Http URL ?

Dear Experts,
I am working on CRM2007 web UI. I need to read a XML file placed on a shared server location by a third party program. Then process that XML file into CRM and create a quotation using the data extracted from the file.
All i have with me is the http URL that points to the location of the file.
I am supposed to read the file , create quotation and at later point of time i would be asked to update the quotation and then generated new XML representing updated quotation and replace the XML file on shared server location with this new updated XML file.
I know how to extract data from XML file into ABAP but i have no clue as to how to access the file on some other server using the http url i have and how to read it ?
I searched on the forum and i found the codes for reading XML file that is located either on client machine OR on the Application server wheareas my file is on some other than sap application server.
Please help me as its an urgent issue .
Points will be rewarded for sure.
Please help.
Thanks in advance,
Suchita.
p.s. : the http url to the file location is like -->
http://SomeServerDomain/SomeDirectory/file.xml

hi,
interesting task.
to request the file by a http call you need to create an if_http_client object.
More info is [here|http://help.sap.com/saphelp_nwmobile71/helpdata/en/e5/4d350bc11411d4ad310000e83539c3/frameset.htm]
to parse the file you either have to work with the ixml packages ([info|http://help.sap.com/saphelp_nwmobile71/helpdata/en/47/b5413acdb62f70e10000000a114084/content.htm]) or you use an XSLT transformation ([info|http://help.sap.com/saphelp_nwmobile71/helpdata/en/a8/824c3c66177414e10000000a114084/content.htm]).
uploading the final file isn't so easy. if you only have http, you should write a server script to allow uploading of the new file and copying it into the place of the old file. but you definitely need the script.
now it's your take. depending on how experienced you are in ABAP and networking this might turn out to be easy or pretty complicated.
have fun,
anton

I was wondering if there's a way to connect to my work server from my home iMac i7. I can't seem to get Share Screen to work. I have tried connecting to server using the vnc but doesn't work.

I was wondering if there's a way to connect to my work server from my home iMac i7. I can't seem to get Share Screen to work. I have tried connecting to server using the vnc but doesn't work.

The easiest way would be to use Back to My Mac, but that will only work if the server is a Mac running OS X 10.7 or later and you have the cooperation of the network administrator.
OS X: Using and troubleshooting Back to My Mac with your iCloud account

Installing Printers from Windows 2008 R2 printer server using the Cname

Am having issues installing printers on workstations from the windows 2008 R2 print server using the DNS names. the servername and Full qualified Name works fine.
l have tweaked the Registry and Disabled the StrictNameChecking but still getting an error. this is the message am getting...
Printer Installation Failed
You do not have enough privilege to complete the printer installation on the local machine.
I found this KB and did exactly what is in the KB but stilll....
lhttp://support.microsoft.com/kb/870911/en-us
need help

Hi.
I think I solved this yesterday. We got 1 printserver, with an alias, which we had this problem to connect to. I noticed that there is a difference between x86 and 64bits system entries in the registry...
When you are having a 64bit system, you must use REG_QWORD instead of REG_DWORD, REG_DWORD is only to be used in x86 system! See below.
Windows 2008 server R2 64-bit
HKLM\SYSTEM\CurrentControlSet\Control\Print
= ”DnsOnWire” = REG_QWORD Decimal = 1
(reg add hklm\system\currentcontrolset\control\print /v DnsOnWire /t REG_QWORD /d 1)
HKLM\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters
= DisableStrictNameChecking = REG_QWORD Decimal = 1
(reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v DisableStrictNameChecking /t REG_QWORD /d 1)
HKLM\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters\
REG_SZ = OptionalNames = “aliasname” (C-name record in DNS)
(reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v OptionalNames /t REG_SZ)
Windows 2008 server x86
HKLM\SYSTEM\CurrentControlSet\Control\Print = "DnsOnWire" = REG_DWORD Decimal = 1
(reg add hklm\system\currentcontrolset\control\print /v DnsOnWire /t REG_DWORD /d 1)
HKLM\SYSTEM\CurrentControlSet\services\Lanmanserver\Parameters = DisableStrictNameChecking = REG_DWORD Decimal = 1
(reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v DisableStrictNameChecking /t REG_DWORD /d 1)
HKLM\SYSTEM\CurrentControlSet\services\LanManServer\Parameters\ REG_SZ = OptionalNames = “aliasname”
(C-name record in DNS)
(reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v OptionalNames /t REG_SZ)
Don't forget to reboot your system after these changes!
Best Regards, Mats

Can't access my Directory Server using the Console installed on a machine

can't access my Directory Server using the Console installed on a remote server, lookied into knowledge base article 4693, but still same any idea ?

I too am having problems accessing Directory server from Netscape Console installed on Winxp.
If I try to open Directory server it doesn't give any error. No windows nothing.
If I try th same from the machine on which it is installed everything is fine. What is strange is that it did open a couple of times. But at the same time I can open the admin server, Netscape Messaging server from the xp box. Searching all over for a solution. Any help/pointers would be greatly appreciated.
Config details:
iDS4.13, iMS 5.0, running on Sol 8 box
Netscape Console 4.2 on WinXP.
Thanks

Hi there, can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac Mini? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? Thanks in advance, Grtz T.

Hi there,
Can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac mini i7 using an Apogee jam as an input for bass and a Behringer USB DAC with RCA audio output? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? I'm also suffering massive audio lag issues with the Apogee jam after waking the mini from sleepmode, wich pretty much renders it useless.
Thanks in advance,
Grtz T.

I think the easiest way to do this is to have the EyeTV app running in one user account and sent via HDMI to the TV, and use a separate user account for Screen Sharing. Both logins can be active at the same time and with Lion you can connect via screen sharing to which ever login you need.
With regards to the Mac video resolution changing, when it is not the current input on your AV receiver. This is 'normal', if the Mac sees no signal it drops down the a lower level. What you need is to buy a HDMI Detective Plus which tricks the Mac in to always seeing a signal and hence it will not drop down the resolution. See http://www.gefen.com/kvm/dproduct.jsp?prod_id=8005
The Mac mini does have an IR receiver. This can be used with the EyeTV app, iTunes, and similar. Yes I believe EyeTV would run for prolonged periods quite happily, it is has been around for a long time and had most of the rough edges polished off. However one issue you will have to deal with is that it does not automatically update its program guide data. For this you might have to write or modify an AppleScript. Elgato support or their user forums will be a lot of help.
You can set EyeTV to convert recordings to an iTunes (Apple TV) compatible format and then delete them from EyeTV.
The HDMI Detective should solve your handshaking problems.

Can data be passed to an external web server using the "in-course web browsing" feature in ver. 7?

Can data be passed to an external web server using the "in-course web browsing" feature in ver. 7? I would like to display a simple web page, and I would like to pass to that web page the answers to all the quiz questions, quiz score, etc. In other words, instead of passing quiz results to a SCORM-compliant LMS like Moodle, I'd like to pass that data to a Drupal Webform using a URL like:
https://www.example.com/my-drupal-webform?param1=value1&param2=value2...&paramn=valuen
Is this possible?
Thanks,
John

You have to make sure every step in MOS Document ID 726414.1 that is applicable to your E-Business Suite 12.1.x release is performed. Enabling ASADMIN is just one of the steps. In spite of following all the steps in this Document you continue to get the error when clicking "Generate WSDL", please log a Service Request with Oracle Support.I will check all steps again. Maybe I missed one... Thanks!

How can I configuration MBean in weblogic server using the console ?

How can I configuration MBean in weblogic server using the console ?
I hear people talking about mbeans in weblogic server I have look in the console I can not find where , or how to do it.
can some body explain that or a link that explain it, how to do it on the console ?

Hi,
Registering Custom MBeans from Admin Console is not yet possible. But yes there are ways to Configure and Utilize Custom MBeans ...
http://weblogic-wonders.com/weblogic/2010/02/16/registering-and-invoking-custommbeans/
Thanks
Jay SenSharma

I have 4 ricco md2 mini USB speakers and i can't get them to play at the same time. i have tried using the aggregate device feature but have had no luck. i can play each pair separately, but not together. what should i do?

i have 4 ricco md2 mini USB speakers and i can't get them to play at the same time. i have tried using the aggregate device feature but have had no luck. i can play each pair separately, but not together. what should i do?

i have 4 ricco md2 mini USB speakers and i can't get them to play at the same time. i have tried using the aggregate device feature but have had no luck. i can play each pair separately, but not together. what should i do?

Cannot create a server using the selected type

Hi,
I'm trying to integrate tomcat 6.0 with Eclipse. But when I try to add Tomcatv6.0 Server,
it is sowing an error message " Cannot create a server using the selected type ".
Can anyone tell me why?
Thanks in advance

In order to solve the problem you need to
* close eclipse
* go to ~/workspace/.metadata/.plugins/org.eclipse.core.runtime/.settings
* remove the files org.eclipse.wst.server.core.prefs and org.eclipse.jst.server.tomcat.core.prefs
* solve the problem with the permissions of the policy files or the personal instance of tomcat6
* start eclipse
In order to be able to use the tomcat6 server the proper solution is to have a personal instance of the tomcat6 server as described in the section "Advanced Configuration - Multiple Tomcat Instances" of the file RUNNING.txt (and the problems that have been reported about this ;-) )
My configuration: Debian/Sid, Eclipse 3.4.1. Ganymede
george

Iphone 4s getting hot up when using the network. is it a sim problem

iphone 4s getting hot up when using the network. is it a sim problem or battery problem?

You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
 Cheers, Tom

HT201210 Trying to restore ipod and keep on getting error message: the ipod software update server could not be contacted. the network connection was reset

Hello can someone please help? Trying to restore ipod and I keep on getting error message: The IPod software update server could not be contacted. The network connection was reset. Make sure your network is active and try again.

Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem

Using the network load balancing from the nodes itself

I have installed a 2 node Sun Cluster 3.2, configured a shared ip resource and attached to it a scalable network aware resource working on the two nodes. I have crashed the process on one of the node in such a way that the cluster could not restart it again
In this status I tried to open a connection from another server and the load balancer always sent the traffic to the node that was up which is as expected...
If I try to open a connection from the node on which the process is failed then I get a connection refused meaning that the load balancer is not working in this circumstance.
Is this a bug/ a mis-configuration/ or just an inherent cluster problem.
Is there a solution to this issue?
Regards
Daniel

To answer your first question, no, there isn't anything you can do.
Here is what my colleague suggested while I was away:
Zone-clusters scalable services still require shared-IP zones, which means requests from one app to another would still bounce back due to loopback. Probably wouldn't help here.
They could isolate the services that must talk to other services into their own failover group on exclusive-IP zones. Other services can be setup as originally planned. But maybe there are too many such "dependent services" for this to be useful. Also, each failover service must have its own IP address.
Finally, can these web services be configured so that it tries multiple addresses. In that case, if the shared address foo for service X bounces back (due to X having crashed on the local node), the app itself would retry with address bar for service X? This allows for uniform configuration across all services, namely:
    - try shared address
    - try node 1's own address (either public or clusternode1-priv)
    - try node 2's own address
You can fine tune it so that configurations on node 1 only use node 2's address as backup, and vice versa. I don't know if that is any help.
As for your second question, the answer is that Solaris Container Clusters allow for consolidation and isolation of clusters onto a single set of nodes. Normal containers don't really allow you to consolidate complete clusters in quite the same way. See http://www.sun.com/offers/details/820-7351.html for more.
Tim
---

Could Form server use the network device

Similar Messages

Maybe you are looking for