Could not save...disk is full

I installed a new 1.5 terabyte hard drive and when I try to save either Photoshop or Lightroom files I get this error message. I do not get the message saving a file in a Sony or Microsoft program. Is this something to do with Adobe programs?
thanks
ja

Thanks for you suggestions which twicked my thinking: When I got an error message in Photoshop, I tried LR and got an error message trying to export an existing collection. BUT, the collection and its catalog were on the old drive that I had removed, so obviously it could not access that source. Now, I have to figure out what the problem is in Photoshop.
thanks again

Similar Messages

Using Photoshop Elements 12 on my MacBook Pro laptop, when saving a file I have been working on I get the following message although there is at least 50GB free space on the hard drive: Could not save because the disk is full.

I have been making Christmas Cards, working in layers and then flattening the image. However, I am unable to save the final image as I get the following message: Could not save because the disk is full. Looking at the system report for my laptop shows there is 52GB of free space.

Well, running on a 2006 model. I did not have a startup disc. Initially, it booted up on original software in 2006. Since then, I've upgraded to 10.6 via a box set. And, since then I think I popped it up to lion.
All I have on a disc is snow leopard. And, I can't get farther than the setup screen due to hard drive. I'm taking to a apple authorized repair store right now. We'll see what they tell me . I'm just going to weigh the cost of repair vs. buying new.
Another bad, stupid thing is I had no means of backing up my stuff. So, I might have lost things like music, vids, etc. we'll see if they can recover. If the cost is too much for repair I might just forget it and start over with a new system. Just not sure at this point.

Photoshop cc could not save because disk doesn't exist

I am trying to save my photo from photoshop back to lightroom and I keep getting an error that is "could not save because disk does not exist. Anyone know how to fix this?

Better to ask in Photoshop Lightroom or Photoshop General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Could not save "blablablabla" becuse write access was not granted, this users have full permissions.

We have several MAC OSX 10.9.3 users that use adobe CC and then having trouble save your files on the network the error is Could not save “blablablabla” because write access was not granted, this users have full permissions.

Some 10.9.3 links
-next link says After Effects, but check YOUR permissions !!!
-http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
-Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

Could not save file

Hi
When I place a .psd-file in Indesign and option + click on it, the image opens in Photoshop. When I try to save the PSD-file, from time to time I get the message: "could not save the file because it is already in use or was left open". I can only save the PSD-file when I close the initial Indesign-document.
I've already posted the is question on the Photoshop-forum (http://forums.adobe.com/message/2216629#2216629) and they say it's an Indesign issue.
What can I do?
Ief

Are you having the problem when doing Edit Original from ID, or simply when opeing a lot of images in Photoshop? In the bad old days when drives were expensive I used to get not enough space errors in Photoshop all the time on large files (or lots of files open would be similar) when trying to save because the scratch disk was full. That's not the same problem as described in the original post though.

Cannot save as PDF - "Could not save a copy as (filename) because the file is already in use..."

I have a number of PSD files I've created and I'm trying to save them as PDFs.
I can Save for Web and Devices, I can save as a .gif, .eps., and every other format I've tested, but I cannot save as a PDF. I get the error:
"Could not save a copy as (filename) because the file is already in use or was left open by another application."
I'm running Adobe Master Collection CS5 with Photoshop CS 5.5 (12.0.4 x64) on a Windows 7 64-bit machine.
I have a 928 GB HD with 697 GB free.
I have rebooted and tried saving the files immediately after I reboot. I have killed my virus scanner. I have killed a number of other possible culprits including Acrotray.exe and CS5ServiceManager.ext
I have run Process Explorer as recommended by Microsoft and found no applications using the file. I've also tried saving the file to my external hard drive and/or renaming the file with only rare luck.
Nothing seems to fix it.
The boards seem to suggest Adobe isn't taking responsibility for this and pointing it back to the OS or other software. I'm willing to believe them if someone can show me how/where to kill whatever process it is - but at this point, all my indicators point back to Photoshop.

Here is a clip from a past post where user could not drag and drop files to hard drive.
To my great relief I have now sorted this issue and offer the following as the Correct Answer. My sincere and grateful thanks go to Curt and Yammer, above, who have helped me so much in sorting this Windows 7 issue which is clearly very relevant to Bridge users also. Any slowness to grasp what they have been saying is down to me!
The key to solving this issue lies is understanding that in terms of Windows 7 Security, every internal or external hard drive, plus folders, sub-folders and files thereon has an OWNER. Also each OWNER has a certain level of PERMISSION to do things such as moving files to a different folder, deleting or re-naming them etc. If you try to do things that you don't currently have Permission to do, that is when you get an ‘Access Denied’ error message. Also your system has an Admistrator or Administrators and at the outset you need to ensure through the Control Panel that you are listed as one of them. .
If, like me, you didn't realise these things, (and why would you if Microsoft or your computer or hard drive suppliers couldn't be bothered to really make sure you knew about them), then trying to fathom the ‘Access Denied’ problem becomes a stressful and frustrating nightmare as I can testify having spent a week at it!
The steps that I took to resolve the issue and which I believe now constitute the 'Correct Answer' are as follows:
First make sure that you have Administrator rights on your system via the Control Panel
Next ‘right click’ on the Drive whose files you want to gain full access to, for example the drive that your pictures are stored on, and click on 'Properties'.
Under the Security tab you will see a list of Groups and Users on this drive and the Permissions that they have to do things.
Before doing anything to edit these Permissions, first click on the Advanced button. This opens another window with a tab showing the Owner of this drive.
Click on the Owner tab and if you are not already listed as the owner, make yourself the owner by selecting your name from the list. I believe it should appear there if you are an admistrator or user. (In my case at this stage the owner was initially shown as an obscure string of numbers and letters which I believe identified the drive when it was connected to the lap top I was using before I upgraded my machine)
Now be sure to check the box that says "Replace Owner on Subcontainers and Objects" and the click Apply. On completion of this step, the drive in question and all the folders, subfolders and files thereon should now be 'owned' by you. You could check this out by right clicking on a particular folder then clicking Properties > Security > Advanced > Owner. Your name should appear. So far so simples!
Now go back to the Security Tab for your drive (Step 2 / 3 above) and look at the Permissions you currently have. Your aim now is to allow yourself 'Full Control.' If you don’t currently have this level of permission click Edit, select your name on the list, check ‘Full Control’ and 'Apply' the change.
I think I'm right in saying that at this point whilst still working in the Drive directory you are now given the option of ticking boxes which allow you to, in effect, cascade the permission you have just granted yourself to all the files and folders on that drive. Tick the box to allow this and Windows should then take care of the rest.If I'm not quite correct here then in my particular case, for example, all my images were stored on my external drive. The top level, or 'parent' folder in which all my pictures could be found was the 'My Pictures' folder and I had created a number of folders and subfolders ('child ' folders) within that folder. The permissions I gave to the Parent folder – My Pictures – were cascaded down through the Child folders.
On completion of the above step I tested the result in Windows Explorer by dragging a few files back and forth between folders and it now worked perfectly - I was now able to move / delete / rename etc all files without now getting the dreaded access denied message. What a sense of relief! This meant that I could now open Bridge normally rather than having to right click it and 'Run As Admistrator' - albeit that is a very useful thing to do until you get the problem sorted as described.

Could not save because file was already in use or left open

I am have several problems with Adobe Photoshop CS4. I call up Adobe for help, I pay 50.00 or 60.00 for their help with these situations that I am having. Adobe concludes the phone call saying they are closing the case cause the problem has been resolved. I told them it has not been resolved I am still having problems then the person hangs up on me. I call back cause the problems still persists, the tech person told me that I had to pay another 50.00-60.00 for the
tech support. I told him that I already paid and that I still need help, the tech guy told me that the case was closed cause it was resolved. I told them it was not
resolved and I am needing help with this particular issue. The tech person kept saying that the issue was resolved and if I needed more help that I had to pay.
This time I hung up on him and while I did that I said that the Apple Support Community was way more helpful and it was free.
So here I am 6 months later and tried everything, Here are the problems that I am having.
1. CS4 keeps quitting unexpectedly with no cause no error nothing. The blue light under the CS4 Ps is still lit and wont let me reopen the file, I then have to force quit the program. I then get these windows asking if I want to send a report, I click ignore cause I am tired of filling out those things. So I try to open the
photoshop file and I get the blue window with the Ps logo on it, its scanning everything but then it stops responding when the scan reaches the part where it says scanning memory and freezes. I then have to force quit the program again, I have to do this 5 times before it will open the file. Then Ps will unexpectedly quit after 2 hrs of working and starts the B.S. all over again. I dont know what is wrong with CS4. Other times it runs really slow and glitchy. It also happens on my Mac Book Pro, iMac and of course my Mac Pro.
I know its not the computers or the settings or anything interacting with it. I checked everything extensively from the terminal to permissions and back to the program itself and everything in between. I am needing help, the Adobe forums are of no use, I cant find anything there.
2. I keep getting this error and I am not sure what it is, this only happens when I use Ps CS4 and yes it happens on all my other Apple computers.
Error: "could not save because file was already in use or left open" not sure how to fixt this, I have already tried the permissions and it did not seem to work.
All my computers run OS X Lion version 10.7.3. I had these problems even before I upgraded to Lion, 2 months later after Lion came out. These problems have been going on since Snow Leopard. All my Macs are up to date and I did use the Disk Utilities on everything... Please help me.

First off are you editing a photo that you have placed into indesign if so the in use or left open issue is a common one, the only help is to go to indesign move the picture by nugging it then go back to photoshop and try saving again, if this does not work close the indesign file then save.
On the other issue of photoshop crashing, One thing I would try would be to create another user account, Start up photoshop and only it and work with it. The reason why is to see if maybe there are some 3rd party software you have loaded on your systems that might be causing the issues. "Ya never know"
I would assume you have reinstalled photoshop on lion. Do you still have older version of OSX installed, if so try booting to them and working with photoshop to see if it works there.
Good Luck

Could not save....because the file is already in use or was left open

I have been using PS since V5 and have never experienced this problem which continues to crop up in PSCS3. I get this stupid error message "Could not save....because the file is already in use or was left open." Even if I save as a new file which does not exist anywhere in the galaxy, I will get the same &^%$!! message. I have gone to the folders and made sure read only was unchecked in properties. I have lots of disk space and four gigs of high-end RAM. This is particularly frustrating when you are using this software to make a living and a fifteen minute project becomes a 45 minute project. I like everything about CS3 but want to pull my hair out by the roots when I pay for the best photo editing software available and it continues to screw me out of money. Adobe, are you out there? Can anyone help???
Thanks
Win XP SP2 / P4 3.2 running at 3.36 / four gig ram / buncha HDD space (more than 2TB total.
Thanks and please excuse my prosaic explosions.
Joe

Same error intermittently on different files. Windows7 64bit CS4. Saving a file in Photoshop - working from local hard drive - and got the file in use can not save error. We tried changing the name, saving as a different file type with no success. I closed absolutely every application that was running and then stopped all non windows processes from Task Manager and still file in use.
I was finally able to save by choosing "NONE" for the preview instead of Tiff 8-bit in the save options.
The bug is in Photoshop and it is putting a file lock on the preview file that it creates and then not alowing any save with the preview option checked.
After saving without a preview we could close PS and reopen then open the saved file and resave with the preview selected. Closing PS unlocked the preview file.

'Could not save because access was not granted'

I have just changed to iMac from a pc.
On the pc I had two LaCie external hard drives containing all my photos. When I connected them up to my Mac, all the photos were there and I was able to edit them but the problem arose when I tried to save them. When I tried to 'save or save as', even using a different file name I am getting the 'could not save because access was not granted' message. The same message pops up even when trying to save something generated in Photoshop and not taken from the external hard drive.
I went into Applications and Disk Utility but it appears the 'hard drives cannot be written to' and the SMART status is not supported, whatever that might mean!
Any help or suggestions would be greatly appreciated.

Hi, possibly your EHD need to be Mac formatted.
If you have formatted them right click on the Icon then select Get Info. On the very bottom of the Get Info window there is a section for Permissions. You need to Unlock (needs your password) and hit the + sign, from there choose YOUR name & Allow "Read Write" - See if that helps..
If the EHD are NOT Mac formatted you will need to transfer everything from one EHD to the other then format the empty drive:- Applications ->Utilities ->Disk Utility -> Hilite Erase (top of window) Mac Extended..After that send everything back to the Formatted drive & do the same to the second drive..Finally Repair Permissions on YOUR Mac Main HD & Verify Disk on the EHD's-after that All should be good..........L
Message was edited by: elmac

Message "Could not save because there is not enough memory (RAM)"

Running Mac OS9.2.2 Suddenly start to get and error message " An error occured saving the enclosure "file name" Not enough memory" when trying to save an attachment in Microsoft Outlook. Same thing with Adobe Photoshop - when trying to save an any new file - message "Could not save because there is not enough memory (RAM)".
Already Tried:
During several freezes, suddenly my mac stop recognize any extensions. When used Microsoft Outlook and tried download an attachment got an error message type 3. So I create a new set in extensions manager and get ride of Type 3 error, but get a new error message "Not enough memory" when try to save an attachment, or "Not enough RAM" - when try to save an EPS file in Adobe Photoshop.
In Outlook ("Get Info" section)changed memory size:
Suggested Size: 7168 K
Minimum Size: 16000 K
Preferred Size: 16000 K
In all mailboxes - there are not that many messages and they are not heavy at all, I checked them all before. And I rebuilt/compressed Outlook database - holding Option while restarted Outlook...
Adobe Photoshop - started acting weird at same time. Even if I want to open a file through the menu: File - Open - it gives me the same message.
Who has any clue - please help!!!

Hi, Mike -
I have Outlook Express's Preferred memory allocation set to 45000K, and don't have any problems with attachments. Don't be afraid of increasing OE's Preferred memory allocation (nor IE's, either - I have that set to 65000K).
How large is the Messages file used by the account you're using in Outlook? You can examine that file here - (hard drive) >> Documents >> Microsoft User Data >> Identities >> (account folder, either the default "Main Identity" or one you've created) >> Messages.
It seems that the Messages file grows with each email received; but does not shrink when an email is deleted. Over time, especially when lots of attachments are involved, that file can get huge.
One way to help it not get too big is to -
• delete attachments after copying them to the desktop. In case you're not familiar with the easy way to copy an attachment to the desktop - select the email so it opens; click the small triangle next to the legend "Attachments" between the upper pane and the lower pane in Outlook's main window; drag the attachment from the list out onto the desktop. It will be extracted and copied to that location. Once that has been done you can delete the attachment from the email with which it arrived.
• after purging your emails of unneeded emails and attachments, compact the file. To do that, quit Outlook if it is running. Then hold down the Option key and start up Outlook. A splash screen will appear asking if you want to compact its database files - click yes. Follow the prompts.
Compacting OE's database can also fix some instances of a damaged database that can't be used.
If you could answer a few more questins, perhaps we can offer additional suggestions -
1) How much RAM do you have installed? That means the physical RAM, not counting Virtual Memory in use, if any.
2) How full is your hard drive - how big is it, how much free space is left unused?
3) When was the last time you rebuilt the desktop file?

Download updates for the lion and I read the writing could not save any of the selected updates. Why?

why after Download updates for the lion 10.7 and I read the writing could not save any of the selected updates and I can't upgrade the software ?

The only thing that worked for me was to boot in safe mode.
Power down. Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore.
No trouble at all once I did this.
Reminder: create full backup before you upgrade OS
Hope it helps.

Could not save as "untitled-218a.jpg" because write access was not granted.

Can anyone guide me on what might be going on? I am unable to save images in PS. I keep getting this error: Could not save as “untitled-218a.jpg” because write access was not granted.
Thank you!

we don't even know what platform your using or version of PS
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Could not Save As because write access was not granted

I get an Error Message every time I try to Save As my Image after working with them on my iMac why?
here the Message I get it: Could not Save As because write access was not granted,I try both JPG & PSD.Thanks

You could start by repairing permissions with Disk Utility and go over the usual trouble-shooting routines (trashing prefs by keeping ctrl-alt-shift pressed while starting Photoshop, 3rd party plug-ins deactivation, system maintenance etc.)?
Edit: Of course you could also manually check the permissions for the file, the folder, the folder the folder resides in etc. (File > Get Info in the Finder).
And just to make sure: You are saving to a local volume and not across a network?

Mac: Could not save PREFERENCES because .....

Could not save Preferences because the file is locked or you do not have the necessary access privileges. Use the ‘Get Info’ command in the Finder to unlock the file or change permissions on the file or enclosing folders.
I have just installed CS5 as an upgrade to my CS3 on my MAc Pro that is running Leopard OS X 10.5.8. The electronic download and installation went very well. I could open CS5 and did work on editing some images, and all seemed to be working fine, until I quitted Photoshop CS5. I got the above message and similar ones for my Workspace changes. The Photoshop CS5 program did not allow me to save any changes in my Preferences, custom Brushes or Workspace.
I have full read/write privileges to my computer and I could not find any file or folder, related to Adobe CS5, that is LOCKED. I have never encountered this 'insufficient privileges' problem with any of my other program installation, including CS3 and lately the Lightroom 3. Please help!!

Hi Slau104,
I had the same problem, and have just found the answer elsewhere on this forum.
It has worked perfectly for me. Here it is…
Just go to Users\Library\Preferences\Adobe Photoshop CS5\ and change the permissions on the folder. I just changed the "Everyone" variable to "Read & Write" and Photoshop started up without issue.

Could not save document

I'm using GoLive CS2 v. 8.0.1
Mac OSX 10.6.7 on a Mac Pro w/ two Quad-core Xeon
I opened my site, made a small change, and when I tried to save the site, I received this error message: Could not save document, OS Error (-36).
When I try to re-open the same site, I'm told the site cannot be read. When I open the backup site, the change I had made is visible but I cannot save this backup site either.
Opening previous copies of the site from another disk gives the same results; I can open the site, make changes, but can't successfully save the site without corrupting it.
I've been using the same version of GoLive successfully for several years, modifying the same site, and now it suddenly cannot save the site.
I updated to OSX 10.6 last December, and have used GoLive successfully since then. I don't recall when the system did the update to 10.6.7 and am not sure if I used GoLive since that happened.
Does this sound like a corruption of the application software? If so, is my best course of action just reloading the software?
Is there some compatibility problem between GoLive 8.0.1 and OSX 10.6.7?
What to do?
Don Wong
[email protected]

Thanks for the PPC tip. My PPC tower is long gone, but I've still got my 6 year old PowerBook. Not sure if it's up to the task, but I'll keep it around.
I'm a photographer, not a website writer, and only learned enough GoLive a few years back to write my site and maintain it. I seem to remember that GoLive was replaced by Dreamweaver (Adobe gave me a copy of it along with GoLive) and my impression is that GoLive is no longer being updated and therefore more problems might crop up as operating systems and hardware evolve. (I could be wrong, since I don't follow web software developments.)
Back to your original comment about wanting to stick with GoLive CS2. If for some reason I wanted to transition to another software in the future, is there a standout choice for me? Keeping in mind that I don't really use it that often, and would prefer spending the least amount of time relearning things.
What is the majority using these days?
Also, if I did switch software, would I have to re-write my site from scratch, or could the existing site be 'ported' over to the new software?

Could not save "IMG_5116.psd" because write access was not granted.

"Could not save “IMG_5116.psd” because write access was not granted." i keep on getting this error message why/?????

nimrod levy,
It seems like a permission issue. Grant 'write and read' permission to the file.
MAC : Right click on the file > click on "Get Info"
scroll to the bottom "Permissions" > unlock it > set permission as "Write and read" to all the users.
Win: Right click on the file > "Properties".
Uncheck "Attributes: Read only".
Go to 'Security' tab > 'Edit'
Give full control check all in "Alloy" column; uncheck all from deny column if any to all the users.

Could not save...disk is full

Similar Messages

Maybe you are looking for