Could not send notification, device does not have a apns token
I dont know what this means....for ipad 3 with mobile iron..
This might help ya -> iOS: Understanding Notifications
Troubleshooting notifications
Push notifications require an active Wi-Fi or cellular connection. If you are not receiving notifications for a specific app, try these steps:
1. Verify that the app supports notifications.
2. After installing an app or restoring a backup to a different iOS device, open the app at least once to begin receiving notifications.
3. If the app requires entering or logging in to an account, you will need to do this before receiving notifications.
4. Check Settings > Notifications to ensure that the app is configured for notifications.
If notifications do not appear only in the Notification Center, verify that the Notification Center setting for the app is enabled.
5. If you are still unable to receive notifications and you are using a Wi-Fi connection, verify that the network or firewall is not blocking access to port 5223.
Similar Messages
-
Updated my phone, now e-mail will not send because server does not allow relaying
Updated iphone 3GS to iOS 5, now my company e-mail will not send "because server does not allow relaying". I'm just an employee, not an IT type - have no idea what this means and I'm very frustrated. Also infuriated with Apple because THEIR update caused this to happen, yet I have to PAY for their support because I have an older iPhone. Someone please help.
razmee209, thanks for your reply. After signing up for the community, I saw that I wasn't the only one. However, I think I've solved it by looking over the comments in reply to others with this problem.
First, I think the iOS5 update may have made the phone default to IMAP setting. I noticed when I deleted my account and re-set it up that there is a large button at the top for either IMAP or POP. It is already defaulted to IMAP, but my account must be POP. So this is the first thing to check when you're setting up your account.
Second, I noted some other comments about needing to supply a username and password to the outgoing server even though it says optional. I included those, but got a message that it wasn't recognized (or something like that) and did I want to continue anyway. I told it to continue. After a few seconds, it verified my account, and now everything works.
Hope this helps others having this problem. -
Outgoing emails not sending, error 'server does not allow relaying.
This IPhone 4 is new, I have made sure that all the credentials are correct and the outgoing settings are set up but still the emails won't send.
I just sold my Blackberry which sends emails better then any other phone, I need this e-mail for work, please help?No it is a AOL account, any ideas?
-
when i try to send songs to my ipad it says 'this device does not have the necessary services' what can i do about this?
call monster, the manfacturer of beats and ask them: http://beatsbydre.com/support/international-support-contact-numbers,default,pg.h tml
-
Exception: Could not send notifications due to Error
Hi experts...
I have configure the Notification Message function for the new task in UWL follow the guide below.
https://help.sap.com/saphelp_nwce711/helpdata/en/e4/32ff7865fa483dba3686160f5c6dd0/frameset.htm
It does work on the server (BPM/CE7.11) in my office. (CE install in VMware along with mail Server, use same IP: 8.8.2.180)
But when I do the same thing on client's side, it just doesn't work out. (use the same VM instance, but in different Network environment)
I list the detail info. of settings and exception below:
For BPM Mail Server Connectivity:
host: 8.8.2.180 (also try bpm.hjoy.com.tw)
user: jason
e-mailAddress: jason @demo.hjoy.com.tw
PSW: goodtry
For BPM Notification Messages Configuration:
Mark both option
URL: http://bpm.hjoy.com.tw:50000
Could not send notifications due to Error: (Failed in component: sap.com/tcbpemtmear, BC-BMT-BPM-DSK) Exception raised from invocation of public int com.sap.bpem.tm.notification.MailNotificationSender.startNotification(com.sap.bpem.tm.adapter.Action,com.sap.bpem.tm.ITaskInstance) throws java.lang.IllegalArgumentException method on bean instance com.sap.bpem.tm.notification.MailNotificationSender@1a44705 for bean sap.com/tcbpemtmearannotation|bpemtmejb.jarannotation|MailNotificationSender in application sap.com/tcbpemtmear.; nested exception is: javax.ejb.EJBTransactionRolledbackException: (Failed in component: sap.com/tcbpembaseear, BC-BMT-BPM-DSK) Exception raised from invocation of public void com.sap.bpem.base.mail.MailSenderBean.send(com.sap.bpem.base.mail.IMessage) throws com.sap.bpem.base.mail.MailException method on bean instance com.sap.bpem.base.mail.MailSenderBean@14d43e4 for bean sap.com/tcbpembaseear*annotation|bpembaseejb.jar*annotation|MailSenderBean in application sap.com/tcbpembaseear.; nested exception is: com.sap.bpem.base.mail.MailException: javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 554 User unknown
Please kindly help me for this...Good day! I configured the notification but I stack with a problem.
There is an error in logs:
Could not send notifications due to Error: {...} nested exception is: com.sap.bpem.base.mail.MailException: com.sun.mail.smtp.SMTPSendFailedException: 550 authentication required
But I've entered the login and the password to the smtp. Where can I find a reason of the error?
Also I tried to configure notification service using the link http://help.sap.com/saphelp_nwce711/helpdata/EN/e4/32ff7865fa483dba3686160f5c6dd0/content.htm, but when I try to configure tcbpembase~ear service there is no edit button and the column "Modifiable" has no check. What it can be? -
Cannot send email. When I click Write the window does not open properly. Does not have the "send, spelling, attach, security, save line there. Then when I click File, then Send now it will not send. A message comes up saying my SMTP server failed. Have check and everything appears to be o.k.
Hi Stephen,
What version of MS Office are you using?
Are you facing the issue similar to that mentioned here: Acrobat/Reader: Attach to Email button not working for PDFs referenced from long URLs
Open Acrobat. Use the click-path Edit - Preferences - select the Category "Email Accounts". In the dialog there is the "Add Account" drop-down. Select "Add Other". The "Add Webmail Account" dialog presents. You'll fill out the dialog's fields with Outlook.com settings. (don't forget the "Advance Settings" button)
From a look-see on the web it appears that the following are the needed settings. BUT, you'll be wanting to validate.
The Outlook.com SMTP server settings for sending outgoing messages from an email program on desktop, cell phone or mobile device are:
• Outlook.com SMTP server address: smtp.live.com
• Outlook.com SMTP user name: Your full Outlook.com email address (not an alias)
• Outlook.com SMTP password': Your Outlook.com password
• Outlook.com SMTP port: 587
• Outlook.com SMTP TLS/SSL encryption required: yes
For incoming messages from an Outlook.com account to an email program using POP, use the Windows Live Hotmail POP3 server settings.
The Outlook.com POP server settings for downloading new incoming messages to email program, cell phone or mobile device are:
• Outlook.com POP server address: pop3.live.com
• Outlook.com POP user name: Your full Outlook.com email address (not an alias)
• Outlook.com POP password: Your Outlook.com password
• Outlook.com POP port: 995
• Outlook.com POP TLS/SSL encryption required: yes
Regards,
Rave -
I have music on my iTunes library that I want to put on my iPhone 4S, but when I plug in my phone to my computer, my device does not appear in iTunes. It is connected to my computer, but iTunes won't recognize it... I have restarted my phone and computer, uninstalled itunes and reinstalled it, and punched a wall. idk what to do..
Unplug your Iphone out of your computer and replug it back in. It took me several times before I could do this
-
Could not send notification 65569 (status 'FAILED')
Customize Workflow runs with 2006 error - only happen in the morning
We have created a customize workflow which works a bit funny here:
When we first run the workflow in the morning, it ends up with this error:
Activity Buyer Notifications
Result Mail
Error Name WFMLRSND_FAILED
Error Message 2006: Could not send notification 65569 (status 'FAILED') to 'CONTRACT SERVICES'.
Error Stack WF_MAIL.GetDocContent(PO_DETAILS_BUYER)
Then, thinking of some problem might happend to the workflow mailer, we run the standard workflow, e.g. PO Approval. It runs successfully and send out the notification email. So, we then run the customise workflow again, and this time it works, no error has been generated as above.
The funny thing is, this had happened more than a week, where every morning I have to somehow run a standard workflow (normally I just create a new PO and send for approval), and got my customize workflow run successfully.
Can someone highlight what's going wrong here?
Is that some setup or soemthing that contribute to this problem?
Thanks,
PatriciaThe notifications are defined in the workflow but they do use a document type attribute (we send a table of data "Job", "Job Name", "Amounts").
We have changed the database packages a lot and that created many problems afterwards so we minimized when we make those changes and we restart everything (database, IAS Server) afterwards.
Here is the email to SYSADMIN:
=========================================================
Subject: Error in Workflow DUNAPIN2/20060323123955x30741282 2006: Could not send notification 41119 (status 'ERROR') to 'KKEMPER'.
From
To SYSADMIN
Sent 03-APR-06
Due
Notification ID 41121
An Error occurred in the following Workflow.
Item Type = DUNAPIN2
Item Key = 20060323123955x30741282
User Key =20060323123955x30741282
Error Name = WFMLRSND_FAILED
Error Message = 2006: Could not send notification 41119 (status 'ERROR') to 'KKEMPER'.
Error Stack = &ERROR_STACK
Activity Id = 52557
Activity Label = GET_GENERAL_LEDGER_APPROVAL:NTF_V2_AR_DEPT_OFF_MGR
Result Code = #MAIL
Notification Id = 41119
Assigned User = KKEMPER
Workflow monitor
Please click on one of the following choices to automatically generate an E-mail response. Before sending the E-mail response to close this notification, ensure all response prompts include a desired response value within quotes.
How do you want to Continue?
How do you want to continue?: Abort Resolved Retry Request information
=========================================================
Any help would be greatly appreciated.
Jim -
Bluetooth: Device Does Not Have The Necessary Services
I have a new iMac and MacBook both with OS X 10.5.1. I paired both via Bluetooth and they both see each other. However when I try to "Send File" or "Browse Device" with either machine, I get an error that says "The device does not have the necessary services".
Very frustrating!Same trouble on Mac 10.5.1 + smartphone HTC s710 (windows mobile 6). The thing is that it worked 15 days ago! (before a relaunch of the device). What does Apple ?
-
When I try to log into Facetime or IMessage, system have returned the following error:
Registering device does not have the appropriate credentials
Two days ago Facetime was working correct I did not change my Apple ID or my password since them. Operating system is Mountain Lion update running on my MacBook Pro.
I do not know if could be a reason for this issue or not but I have updated recently my iPhone and my iPad to iOS 7. But Facetime between these device are working properly, the problem is with the MacBook Pro.
Please, any help to solve this problem will be apreciated.I do have the same thing going on with my MacBook! it's annoying!
-
Internet Connection - Your Apple wireless device does not have a valid IP.
I just bought an Apple TimeCapsule and set it up normally, following instructions to my Arris cable network on the Videotron provider here in Quebec, Canada. The TimeCapsule did appear as a wireless device on my MacBook Pro (after updating the AirPort software from the provided CD - as was instructed). I went through the whole installation process to obtain at the end this error:
Internet Connection - Your Apple wireless device does not have a valid IP.
The only provided instructions were to check the cable and then contact your Internet provider. Well it seems clear to me that if I contact my provider and say that the internet connection works fine directly on my computer, also fine through my "normal" wireless router but not with my new TimeCapsule, I won't get much of a response.
After a lot of research, a friend indicated the solution in my case.
You have to really reset the cable modem to convince it to start giving out IPs again.
To do this:
1. Unplug your TimeCapsule (possibly you might have to reset to factory defaults - see the documentation)
2. Unplug your cable modem
3. Reset your cable modem by pressing the reset button with a pen (or something) for several seconds.
4. Plug your cable modem back in and let it reboot/restart - until the lights are back on.
5. Plug in your TimeCapsule
Everything should now work and you can restart your AirPort set-up on your Mac.
Good luck!My ISP is AOL. The service is DSL via a broadband modem. Somewhere during the setup process there appears to be a communicatiosn issue between the Airport Extreme Base Station and the DSL modem. When I hook the DSL modem directly to my iMac I can connect to the internet without any issues.
I tried the factory reset and the DSL modem reboot process described in other posts and seemed very close to success...until the internet setup step. That is where this issue first presented itself. -
I've just updated my iTunes on my laptop
And when i plug my iPhone in, nothing happens and the device does not show up in iTunes
I have tried numerous cables, uninstalling and re-installing iTunes and searching for devices on iTunes
And i still have no luck
help!Pick the appropriate one of these for advice:
Windows - http://support.apple.com/kb/ts1538
Mac - http://support.apple.com/kb/ts1591 -
When trying to log into face time I get the registering device does not have appropriate credentials after I sign in, I have OSX 10.8.4 on my Mac Pro. I can log into face time without a problem using my IPAD.>
Please take each of the following steps that you haven't already tried, until the issue is reolved. If there's no resolution after Step 3, post your results.
Step 1
Sign out of iMessage in the Accounts tab of the preferences dialog, then sign back in.
Step 2
Log out of your user account and log back in.
Step 3
Boot in safe mode and test, then reboot as usual and test again.
Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. -
My device does not automatticaly download and I have turned off I cloud
I am signed into I tunes. I have my I phone connected, but my device does not show up. I had disabled Icloud and still my device does not show up. I am trying to sync my pictures to get my available space on my phone to allow more things to be done.
Where exactly are you looking, and are you trying to copy photos off your phone or sync them to it ? (Whether you are signed into iCloud or not doesn't matter.)
If copy them off your phone (and the photos weren't originally synced from a computer) then copying them is done outside of iTunes : Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support
If you are trying to sync them to your phone and the phone isn't showing in your iTunes when connected to it (on the current version of iTunes you should get a device icon towards the top left of iTunes, next to the content category icons) then try these troubleshooting pages :
PC : iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Mac : If you don't see your connected device in iTunes for Mac - Apple Support -
I'm trying to set up my Facetime on my laptop but I'm getting an error message that says my registering device does not have appropriate credentials. How can I fix this?
katharina,
The specific circuit board I was talking about is the "Logic Board" which should have the serial number of your computer embeded electronnicaly. Sometimes the technicians who replace this board do not bother to enter the computer's serial number into it after making the repair/replacement. Probably because they don't think that it is important. The only way you can have this done is to bring it back to the shop where it was repaired, and have them do it. On some Macs you can check the electronic serial number by clicking on the Apple logo on the top left hand corner of the screen, then clicking on "about this mac" then clicking on "more info" button on the window which will appear. If you can't see any serial number, then your replacement board was not serialized.
Maybe you are looking for
-
DHCP problem with wireless clients
I've just set up this eqipment Router/Firewall ASA 5505 Cisco WLC 2125 - Wlan controller Switch Catalyst 2960 16 Ap's AIR-LAP1131AG-E-K9 Everything was working fine, but after a while there was a problem, spesially with cell phones with wlan and wit
-
How to print in reverse on my officejey 4500 wireless
I just purchesed a pad printer and I need to be able to print in reverse can you help. Thanks
-
Hello everybody, Just for information I would like to know something please : In R/3 SD we use product proposal from tables VBPV and VBPK while creating sales documents for our customers. We would like to use just the same in our CRM and Mobile Sales
-
Hi, While reading "Enterprise Single Sign-On", I came across section "Message Processing With an SSO Ticket". Here, the explanation contains 2 SSO (SSO Server A and SSO Server B). But, I have seen many times that there is only single SSO Server. How
-
While trying to instal Mountain Lion OS on my macbook pro, I got the error message that my HD was damaged and it reverted to my Lion OS. Why does this happen? I bought the OS online through the app store.