Could u pls send these?
I need a moderate example for interactive report with little bit complexity in logic
could any body provide me any report or atleast link so that I can able to learn ,As
Im very fresher to reports Im interested to knew about the reports development but I need
a little bit hard and includes runtime selcection screen logics ,real time example ..could u pls....send it tome...
A simple example that shows two lists
REPORT zkb_test.
DATA: i_t000 TYPE TABLE OF t000,
i_tcurc TYPE TABLE OF tcurc.
DATA: w_t000 TYPE t000,
w_tcurc TYPE tcurc.
DATA: v_field(80) TYPE c.
START-OF-SELECTION.
SELECT * FROM t000 INTO TABLE i_t000.
SELECT * FROM tcurc INTO TABLE i_tcurc.
LOOP AT i_t000 INTO w_t000.
WRITE:/ w_t000-mtext,
w_t000-ort01,
w_t000-mwaer HOTSPOT ON.
HIDE w_t000-mwaer.
ENDLOOP.
AT LINE-SELECTION.
GET CURSOR FIELD v_field.
CONCATENATE 'You have Clicked:' v_field INTO v_field.
MESSAGE v_field TYPE 'I'.
READ TABLE i_tcurc INTO w_tcurc WITH KEY waers = w_t000-mwaer.
IF sy-subrc EQ 0.
WRITE:/ w_tcurc-waers,
w_tcurc-isocd.
ENDIF.
Regards
Kathirvel
Similar Messages
-
I want to learn SD , Could you pls send me the Reference Book names.
Hi All,
I want to learn SD , Could you pls send me the Reference Book names.
and i heard about materials like Billing , Pricing , Shipping - Which material should i study first to understand baisc flow.
Thanks in Advance.
Regards,
Nithi.Hi ,
Instaed of a book i will refer you the help files of SAP .
You can get there files at http://help.sap.com/
An for SD the link is http://help.sap.com/saphelp_47x200/helpdata/en/92/df293581dc1f79e10000009b38f889/frameset.htm
These files will help you a lot .
even today also SD gurus take help from these files only.
Regards -
Hi everybody!
I have some doubts in abap could u pls tellm these asap!
How you support the clients. Could you expalin me prcedure of loging the tockens and how do you intract to clients. Also hom many tockens you get in a day ( on an average).
What is Integration between SD and MM : SD and FICO ? Can any body give me this is ?
How to maintain Transport Request?Hai!
In Sap we have three types of projects 1.Implementation 2.Upgrading 3.Maintanence.
When ur talking about the supporting to client it means that the Sap is already implemented and the coding part is also done.But when the client wants to change the look of the ouput ie it can be from any part of Abap(report,BDC's scripts and so on).So we need to change the coding according to the requirement of client ie in simple terminology enhancements.
Coming to tickets that depends upon the project if the supporting project is huge it takes time and until u are not up with it you wont be given the other one.I mean when it is fully tested and forwarded to PRD.Well about transport request you have transaction called SE09 create a transport request in DEV and work on it when you feel that the coding part is done in DEV then transport it to QAS for testing.You'll be getting request when u make changes in program.I did'nt understand about your question regarding Integration between SD and MM or FICO.Hope u got my answer to ur questions. -
Pls Send me Step by Step procedure for a Smartforms
hi all ,
pls send me Step by step procedure for a Smartform creation or PPT to This Email id : [removed by moderator]
thanks in advance
rgds
rafi.vhi mahammad rafi,
u can read this,
smart forms
Introduction to SAP SmartForms
What is SAP Smart Forms?
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all
cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic
are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via
a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At
runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals,
and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks
whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use
background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can
suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in
minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure
(tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for
graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content
and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content
from R/3 to an external product without passing any layout information about the Smart Form.
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is
necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with
data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)
A Simple Smartform Tutorial
SAP Smartforms can be used for creating and maintaining forms for mass printing in SAP Systems. The output medium for Smartforms
support printer, fax, e-mail, or the Internet (by using the generated XML output).
According to SAP, you need neither have any programming knowledge nor use a Script language to adapt standard forms. However, basic
ABAP programming skills are required only in special cases (for example, to call a function module you created or for complex and extensive
conditions).
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Additional Fonts for your SMARTFORMS
You can create additional fonts and style with transaction SMARTSTYLES
This can then be define in the paragraph and character formats, which you can then be assign to texts and fields in the Smart Form.
The character formats includes effects such as superscript, subscript, barcode and font attributes.
Difference with SMARTFORMS vs. SapScript(SE71)
The Following are the differences :-
a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
b) It is possible to have a smartform without a main window .
c) Labels cannot be created in smartforms.
d) Routines can be written in smartforms tool.
e) Smartforms generates a function module when activated.
Contributed by : SAP ABAP/4 Programming, Basis Administration, Configuration Hints and Tips
f) Unlike sapscripts (RSTXSCRP), you cannot upload/download Smartform to your local harddisk.
It was said that it was provided in CRM 3.0 version, but not available in R/3. You can download smartforms into Local PC in a XML format.
In the same way you can upload this XML format into Smartform. From the smartform editor itself you can call download option, if you are
working in CRM 3.0 environment.
In R3 also, you can download into XML format. However, it's not sure about uploading. Refer to the program 'SF_XSF_DEMO'.
In 4.7 Enterprise, other have seen this utlity which is completey missing in 4.6c. There is functionality to downlaod a complete form or only a
particular node. (Utilities -> Download form). It will create a XML file and save it in the hard disk.
For others, if you want to download/upload the Smartforms source, you will need the help from the Basis people. What you can do is to
create a Transport and then FTP down to your local harddisk. When you need the Smartform source in another system, you have FTP up
the Smartforms file back to the SAP server. Finally, the Basis team, will tp it into your system.
g) The protect and endprotect command in sapscript doesn't work with smartforms. For example on a invoice: First data of position no 80. is
printed on page one, other data of position no 80 is printed on page 2. And there's nothing you can do about it. Actually, there is
something you can do about it. By using a folder node and checking the 'protect' checkbox, everything in that folder will be page protected.
FAQ on Migrating SAPscript to SmartForms
Is it possible to migrate a SAPscript form to a Smart Form?
Smart Forms provides a migration tool for this purpose which migrates layout and texts of a SAPscript form to a Smart Form. It does not
migrate SAPscript form logic of the print program. Using Smart Forms, this logic is described by the tree structure of the Form Builder. The
effort involved in migrating it depends on the complexity of the print program.
Which Basis Release do I need to use SAP Smart Forms?
SAP Smart Forms is available as of R/3 Basis Release 4.6C.
I have heard that Smart Forms replaces SAPscript. What does "replace" mean?
It does not mean that SAPscript is removed from the Basis shipment. Even as of Basis Release 4.6C, SAPscript remains part of the SAP
standard and there are no plans to remove it. Since Smart Forms is currently, and will continue to be, the tool for form maintenance for
mySAP.com solutions, our further development efforts will focus on Smart Forms, not on SAPscript.
Do we have to migrate all SAPscript forms to Smart Forms?
There is no point in migrating all SAPscript forms already in use. Since SAPscript can still be used and will be available in the future, there is
no need to. If you plan to migrate a SAPscript form, it is recommended that you check whether benefit is worth the effort involved.
Conversion of SAPSCRIPT to SMARTFORMS
SAP provides a conversion for SAPscript documents to SMARTforms.
This is basically a function module, called FB_MIGRATE_FORM. You can start this function module by hand (via SE37), or create a small ABAP
which migrates all SAPscript forms automatically.
You can also do this one-by-one in transaction SMARTFORMS, under
Utilities -> Migrate SAPscript form.
You could also write a small batch program calling transaction SMARTFORMS and running the migration tool.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the
corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in
the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the
user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all
form outputs are included in an output request
Smart forms Frequently Asked Questions
Forcing a page break within table loop
Create a loop around the table. Put a Command node before the table in the loop that forces a NEWPAGE on whatever condition you want.
Then only loop through a subset of the internal table (based on the conditions in the Command node) of the elements in the Table node.
Font style and Font size
Goto Transaction SMARTSTYLES.
There you can create Paragraph formats etc just like in sapscript.
Then in your window under OUTPUT OPTIONS you include this SMARTSTYLE and use the Paragraph and character formats.
Line in Smartform
Either you can use a window that takes up the width of your page and only has a height of 1 mm.
Then you put a frame around it (in window output options).
Thus you have drawn a box but it looks like a line.
Or you can just draw "__" accross the page and play with the fonts so that it joins each UNDER_SCORE.
Difference between 'forminterface' and 'global definitions' in global settings of smart forms
The Difference is as follows.
To put it very simply:
Form Interface is where you declare what must be passed in and out of the smartform (in from the print program to the smartform and out
from the smartform to the print program).
Global defs. is where you declare data to be used within the smartform on a global scope.
ie: anything you declare here can be used in any other node in the form.
Smartforms function module name
Once you have activated the smartform, go to the environment -> function module name. There you can get the name of funtion module
name.
The key thing is the program that calls it. for instance, the invoice SMARTFORM LB_BIL_INVOICE is ran by the program RLB_INVOICE.
This program uses another FM to determine the name of the FM to use itself. The key thing is that when it calls this FM (using a variable to
store the actual name), that the parameters match the paramters in your smartform.
Another thing to note is that the FM name will change wherever the SF is transported to.
So you need to use the FM to determine the name of the SF.
Here is the code that can be use to determine the internal name of the function module:
Code:
if sf_label(1) <> '/'. " need to resolve by name
move sf_label to externalname.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = externalname
importing
fm_name = internalname
exceptions
no_form = 1
no_function_module = 2
others = 3.
if sy-subrc <> 0.
message 'e427'.
endif.
move internalname to sf_label.
endif.
It checks to see if the sf_label starts with a '/', which is how the internal names start. if it does, the name has already been converted. If
not, it calls the FM and converts the name.
You would then CALL FUNCTION sf_label.
Smartforms FAQ Part Two
Smartforms output difference
Problem with Smartforms: in a certain form for two differently configured printers, there seem to be a difference in the output of characters
per inch (the distance between characters which gives a layout problem - text in two lines instead of one.
It happens when the two printers having different Printer Controls' if you go to SPAD Menu (Spool Administrator Menu) you can see the
difference in the Printer Control and if you make the Printer control setting for both the printers as same. then it will be ok. and also u have
to check what is the device type used for both the output devices.
SmartForms Output to PDF
There is a way to download smartform in PDF format.
Please do the following:
1. Print the smartform to the spool.
2. Note the spool number.
3. Download a PDF file (Acrobat Reader) version of the spool by running Program RSTXPDFT4 and entering the
noted spool number.
SmartForm Doublesided printing question
Your customer wants your PO SmartForm to be able to print "Terms and Conditinos" on the back side of each page. They don't want to
purchase pre-printed forms with the company's logo on the front and terms & conditions on the back. Now this presents an interesting
problem.
Has anyone else ever had a request like this? If for example there was a 3 page PO to be printed, they want 3 pieces of paper, the front
side of each to containe the PO information (page 1, 2, and 3) and the back side of each piece of paper to containg the static "Terms &
Conditions" information.
Anyone have a clue how to force this out?
Easy - page FRONT lists page CONTACTS as next page and CONTACTS lists FRONT as next page. Since CONTACTS does not contain a MAIN
window, it will print the contacts info and then continue on to FRONT for the rest of the main items. Additionally, set print mode on FRONT to
D (duplex) and set CONTACTS to 'blank' (for both resource name and print mode - this is the only way to get to the back of the page).
Transport Smart Forms
How does one transport SMARTFORM? SE01?
How do you make sure that both, the SMARTFORM & it's function module gets transported? Or does the FM with same name gets generated
automatically in the transported client?
A smartform is transported no differently than any other object. if it is assigned to a development class that is atteched to a transport layer,
it will be transported.
The definition is transported, and when called, the function module is regenerated.
This leads to an interetsing situation. On the new machine, it is very likely the function module name will be different than the name on the
source system. Make sure, before you call the function module, you resolve the external name to the internal name using the
'SSF_FUNCTION_MODULE_NAME' function module.
Typically, generate the SF, then use the pattern to being in the interface. Then change the call function to use the name you get back from
the above function module.
Smartforms: protect lines in main window.
How to protect lines in the main window from splitting between pages?
It was easy with SAPscript, but how to do it with SF's. For 4.7 version if you are using tables, there are two options for protection against
line break:
- You can protect a line type against page break.
- You can protect several table lines against page break for output in the main area.
Protection against page break for line types
- Double-click on your table node and choose the Table tab page.
- Switch to the detail view by choosing the Details pushbutton.
- Set the Protection against page break checkbox in the table for the relevant line type. Table lines that use this line type are output on
one page.
Protection against page break for several table lines
- Expand the main area of your table node in the navigation tree.
- Insert a file node for the table lines to be protected in the main area.
- If you have already created table lines in the main area, you can put the lines that you want to protect again page break under the file
using Drag&Drop. Otherwise, create the table lines as subnodes of the file.
- Choose the Output Options tab page of the file node and set the Page Protection option. All table lines that are in the file with the Page
Protection option set are output on one page.
In 4.6, Alternatively in a paragraph format use the Page protection attribute to determine whether or not to display a paragraph completely
on one page. Mark it if you want to avoid that a paragraph is split up by a page break. If on the current page (only in the main window)
there is not enough space left for the paragraph, the entire paragraph appears on the next page.
Details information about SAP Barcodes
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the
logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP
support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as
the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format
language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most
important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on
the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
The next part of the equation can be a bit tricky as you will need to get a printer to print that barcode font. Regular laser printers does not
normally print barcode fonts, only specialized industrial printers that is specifically designed to support that protocol and that uses
specialized label media and heat transfer (resin) ribbon to create the sharp image required for barcodes.
Not to fear though, there are two ways to get around this:
- You can have your IT department do some research -
most laser printers can accept a font cartridge/dimm chip (similar to computer memory), called a BarDIMM that will allow a laser printer to
support the printing of barcodes.
- Secondly, you can buy software that you can upload in your SAP pri
regards..
seshu. -
Pls send some usefull doc related to CO
MODERATOR: Do not post your email address or links to copyrighted information on these forums. If you do, the thread will be LOCKED and all points UNASSIGNED. If you have some information, please consider posting it to the [Wiki|https://wiki.sdn.sap.com/wiki/display/ERPFI/Home] rather than sharing via email. Than you for your assistance.
Dear Gurus,
Pls send some usefull doc related to CO(Eg Presentation or user manual) on removed by moderator
i assign full marks to u.
Regards
MaheshHi Mahesh,
Please check the below link, it may hep you....
http://www.sapficoconsultants.com/thanku.html
if useful pl assign points
thanks
PVK -
Pls send material for idocs in ECC 6.0
Pls send material for idocs in ECC6.0
Hi sitaram s ,
IDoc
- IDoc (for intermediate document) is a standard data structure for electronic data interchange (EDI) between application programs written for the popular SAP business system or between an SAP application and an external program. IDocs serve as the vehicle for data transfer in SAP's Application Link Enabling (ALE) system. IDocs are used for asynchronous transactions: each IDoc generated exists as a self-contained text file that can then be transmitted to the requesting workstation without connecting to the central database. Another SAP mechanism, the Business Application Programming Interface (BAPI) is used for synchronous transactions.
A large enterprise's networked computing environment is likely to connect many geographically distributed computers to the main database. These computers are likely to use different hardware and/or operating system platforms. An IDoc encapsulates data so that it can be exchanged between different systems without conversion from one format to another.
IDoc types define different categories of data, such as purchase orders or invoices, which may then be broken down into more specific categories called message types. Greater specificity means that an IDoc type is capable of storing only the data required for a particular transaction, which increases efficiency and decreases resource demands.
An IDoc can be generated at any point in a transaction process. For example, during a shipping transaction process, an IDoc may be generated that includes the data fields required to print a shipping manifest. After a user performs an SAP transaction, one or more IDocs are generated in the sending database and passed to the ALE communication layer. The communication layer performs a Remote Function Call (RFC), using the port definition and RFC destination specified by the customer model. The IDoc is transmitted to the receiver, which may be an R/3, R/2, or some external system.
Archiving Processed IDocs
IDoc archiving is a two-step process:
1. Archive the IDoc.
2. After that another job will be generated. You can see in your SARA for your trigger to delete those archived IDocs.
Have a look at transaction WE47, set "Archiving - Possible" for all statuses to be archived. Use transaction SARA with object IDoc to archive. If the above is set then all IDocs are archived the same way.
Transaction SARA works in the following way:
On the main screen enter IDoc as the object. Click on Customising -> Technical settings. This shows the logical filename (configured via transaction FILE & SF01) that will be used to get a filename when writing the archive files. It also shows the document type (that links to an archive via transaction 0AC0) or the archive, depending on SAP version. You can also set the size of the archive files and whether the deletion and storage jobs should execute automatically or not.
On the main screen there are, amongst others, buttons for ARCHIVE, DELETE and MANAGEMENT. When you click on ARCHIVE you will go to a screen where you can create variants, and set the parameters for the archiving job. The EXECUTE button will schedule this job. If the "start automatic" tic for the deletion program was not set in customising, you will need to go to the DELETE button on the main screen to schedule the deletion jobs, after the archive job has finished. This schedules a job per archive file. In MANAGEMENT you will be able to see the statuses of each archive run.
SAP Integration Using ALE(Application Linking and Enabling)
- IDOCS -
http://www.thespot4sap.com/Articles/SAP_ALE_IDOCS.asp
Updating IDoc data in segments,Changing a control record of an IDoc,Getting IDocs linked to Application documents,
Displaying and IDoc in a report,Read IDoc from Database,Creating and sending an IDoc,Update IDoc status on the database
ALE Inbound Pre-Processing
http://www.erpgenie.com/sapedi/idoc_abap.htm
cheers!
gyanaraj
reward points if u find this helpful -
Could you please send me the material Opps concepts Classes and Methods
Hi Experts,
I am working on Opps concepts.I am new to this concept.
Could you please send me the detailed presentation on Abap oops.
Thanks inadvance,
Regards,
Rekha.Hi this will help u.
OOPs ABAP uses Classes and Interfaces which uses Methods and events.
If you have Java skills it is advantage for you.
There are Local classes as well as Global Classes.
Local classes we can work in SE38 straight away.
But mostly it is better to use the Global classes.
Global Classes or Interfaces are to be created in SE24.
SAP already given some predefined classes and Interfaces.
This OOPS concepts very useful for writing BADI's also.
So first create a class in SE 24.
Define attributes, Methods for that class.
Define parameters for that Method.
You can define event handlers also to handle the messages.
After creation in each method write the code.
Methods are similar to ABAP PERFORM -FORM statements.
After the creation of CLass and methods come to SE38 and create the program.
In the program create a object type ref to that class and with the help of that Object call the methods of that Class and display the data.
Example:
REPORT sapmz_hf_alv_grid .
Type pool for icons - used in the toolbar
TYPE-POOLS: icon.
TABLES: zsflight.
To allow the declaration of o_event_receiver before the
lcl_event_receiver class is defined, decale it as deferred in the
start of the program
CLASS lcl_event_receiver DEFINITION DEFERRED.
G L O B A L I N T E R N A L T A B L E S
*DATA: gi_sflight TYPE STANDARD TABLE OF sflight.
To include a traffic light and/or color a line the structure of the
table must include fields for the traffic light and/or the color
TYPES: BEGIN OF st_sflight.
INCLUDE STRUCTURE zsflight.
Field for traffic light
TYPES: traffic_light TYPE c.
Field for line color
types: line_color(4) type c.
TYPES: END OF st_sflight.
TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
DATA: gi_sflight TYPE tt_sflight.
G L O B A L D A T A
DATA: ok_code LIKE sy-ucomm,
Work area for internal table
g_wa_sflight TYPE st_sflight,
ALV control: Layout structure
gs_layout TYPE lvc_s_layo.
Declare reference variables to the ALV grid and the container
DATA:
go_grid TYPE REF TO cl_gui_alv_grid,
go_custom_container TYPE REF TO cl_gui_custom_container,
o_event_receiver TYPE REF TO lcl_event_receiver.
DATA:
Work area for screen 200
g_screen200 LIKE zsflight.
Data for storing information about selected rows in the grid
DATA:
Internal table
gi_index_rows TYPE lvc_t_row,
Information about 1 row
g_selected_row LIKE lvc_s_row.
C L A S S E S
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_toolbar FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING
e_object e_interactive,
handle_user_command FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm.
ENDCLASS.
CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_toolbar.
Event handler method for event toolbar.
CONSTANTS:
Constants for button type
c_button_normal TYPE i VALUE 0,
c_menu_and_default_button TYPE i VALUE 1,
c_menu TYPE i VALUE 2,
c_separator TYPE i VALUE 3,
c_radio_button TYPE i VALUE 4,
c_checkbox TYPE i VALUE 5,
c_menu_entry TYPE i VALUE 6.
DATA:
ls_toolbar TYPE stb_button.
Append seperator to the normal toolbar
CLEAR ls_toolbar.
MOVE c_separator TO ls_toolbar-butn_type..
APPEND ls_toolbar TO e_object->mt_toolbar.
Append a new button that to the toolbar. Use E_OBJECT of
event toolbar. E_OBJECT is of type CL_ALV_EVENT_TOOLBAR_SET.
This class has one attribute MT_TOOLBAR which is of table type
TTB_BUTTON. The structure is STB_BUTTON
CLEAR ls_toolbar.
MOVE 'CHANGE' TO ls_toolbar-function.
MOVE icon_change TO ls_toolbar-icon.
MOVE 'Change flight' TO ls_toolbar-quickinfo.
MOVE 'Change' TO ls_toolbar-text.
MOVE ' ' TO ls_toolbar-disabled.
APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD.
METHOD handle_user_command.
Handle own functions defined in the toolbar
CASE e_ucomm.
WHEN 'CHANGE'.
PERFORM change_flight.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMETHOD.
ENDCLASS.
S T A R T - O F - S E L E C T I O N.
START-OF-SELECTION.
SET SCREEN '100'.
*& Module USER_COMMAND_0100 INPUT
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
DATA:
For parameter IS_VARIANT that is sued to set up options for storing
the grid layout as a variant in method set_table_for_first_display
l_layout TYPE disvariant,
Utillity field
l_lines TYPE i.
After returning from screen 200 the line that was selected before
going to screen 200, should be selected again. The table gi_index_rows
was the output table from the GET_SELECTED_ROWS method in form
CHANGE_FLIGHT
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines > 0.
CALL METHOD go_grid->set_selected_rows
EXPORTING
it_index_rows = gi_index_rows.
CALL METHOD cl_gui_cfw=>flush.
REFRESH gi_index_rows.
ENDIF.
Read data and create objects
IF go_custom_container IS INITIAL.
Read data from datbase table
PERFORM get_data.
Create objects for container and ALV grid
CREATE OBJECT go_custom_container
EXPORTING container_name = 'ALV_CONTAINER'.
CREATE OBJECT go_grid
EXPORTING
i_parent = go_custom_container.
Create object for event_receiver class
and set handlers
CREATE OBJECT o_event_receiver.
SET HANDLER o_event_receiver->handle_user_command FOR go_grid.
SET HANDLER o_event_receiver->handle_toolbar FOR go_grid.
Layout (Variant) for ALV grid
l_layout-report = sy-repid. "Layout fo report
Setup the grid layout using a variable of structure lvc_s_layo
Set grid title
gs_layout-grid_title = 'Flights'.
Selection mode - Single row without buttons
(This is the default mode
gs_layout-sel_mode = 'B'.
Name of the exception field (Traffic light field) and the color
field + set the exception and color field of the table
gs_layout-excp_fname = 'TRAFFIC_LIGHT'.
gs_layout-info_fname = 'LINE_COLOR'.
LOOP AT gi_sflight INTO g_wa_sflight.
IF g_wa_sflight-paymentsum < 100000.
Value of traffic light field
g_wa_sflight-traffic_light = '1'.
Value of color field:
C = Color, 6=Color 1=Intesified on, 0: Inverse display off
g_wa_sflight-line_color = 'C610'.
ELSEIF g_wa_sflight-paymentsum => 100000 AND
g_wa_sflight-paymentsum < 1000000.
g_wa_sflight-traffic_light = '2'.
ELSE.
g_wa_sflight-traffic_light = '3'.
ENDIF.
MODIFY gi_sflight FROM g_wa_sflight.
ENDLOOP.
Grid setup for first display
CALL METHOD go_grid->set_table_for_first_display
EXPORTING i_structure_name = 'SFLIGHT'
is_variant = l_layout
i_save = 'A'
is_layout = gs_layout
CHANGING it_outtab = gi_sflight.
*-- End of grid setup -
Raise event toolbar to show the modified toolbar
CALL METHOD go_grid->set_toolbar_interactive.
Set focus to the grid. This is not necessary in this
example as there is only one control on the screen
CALL METHOD cl_gui_control=>set_focus EXPORTING control = go_grid.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0200 INPUT
MODULE user_command_0200 INPUT.
CASE ok_code.
WHEN 'EXIT200'.
LEAVE TO SCREEN 100.
WHEN'SAVE'.
PERFORM save_changes.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
*& Form get_data
FORM get_data.
Read data from table SFLIGHT
SELECT *
FROM zsflight
INTO TABLE gi_sflight.
ENDFORM. " load_data_into_grid
*& Form change_flight
Reads the contents of the selected row in the grid, ans transfers
the data to screen 200, where it can be changed and saved.
FORM change_flight.
DATA:l_lines TYPE i.
REFRESH gi_index_rows.
CLEAR g_selected_row.
Read index of selected rows
CALL METHOD go_grid->get_selected_rows
IMPORTING
et_index_rows = gi_index_rows.
Check if any row are selected at all. If not
table gi_index_rows will be empty
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines = 0.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
textline1 = 'You must choose a line'.
EXIT.
ENDIF.
Read indexes of selected rows. In this example only one
row can be selected as we are using gs_layout-sel_mode = 'B',
so it is only ncessary to read the first entry in
table gi_index_rows
LOOP AT gi_index_rows INTO g_selected_row.
IF sy-tabix = 1.
READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
ENDIF.
ENDLOOP.
Transfer data from the selected row to screenm 200 and show
screen 200
CLEAR g_screen200.
MOVE-CORRESPONDING g_wa_sflight TO g_screen200.
LEAVE TO SCREEN '200'.
ENDFORM. " change_flight
*& Form save_changes
Changes made in screen 200 are written to the datbase table
zsflight, and to the grid table gi_sflight, and the grid is
updated with method refresh_table_display to display the changes
FORM save_changes.
DATA: l_traffic_light TYPE c.
Update traffic light field
Update database table
MODIFY zsflight FROM g_screen200.
Update grid table , traffic light field and color field.
Note that it is necessary to use structure g_wa_sflight
for the update, as the screen structure does not have a
traffic light field
MOVE-CORRESPONDING g_screen200 TO g_wa_sflight.
IF g_wa_sflight-paymentsum < 100000.
g_wa_sflight-traffic_light = '1'.
C = Color, 6=Color 1=Intesified on, 0: Inverse display off
g_wa_sflight-line_color = 'C610'.
ELSEIF g_wa_sflight-paymentsum => 100000 AND
g_wa_sflight-paymentsum < 1000000.
g_wa_sflight-traffic_light = '2'.
clear g_wa_sflight-line_color.
ELSE.
g_wa_sflight-traffic_light = '3'.
clear g_wa_sflight-line_color.
ENDIF.
MODIFY gi_sflight INDEX g_selected_row-index FROM g_wa_sflight.
Refresh grid
CALL METHOD go_grid->refresh_table_display.
CALL METHOD cl_gui_cfw=>flush.
LEAVE TO SCREEN '100'.
ENDFORM. " save_changes
chk this blog
/people/vijaybabu.dudla/blog/2006/07/21/topofpage-in-alv-using-clguialvgrid
with regards,
Hema.
pls give points if helpful. -
Pls Send Some Good Doc's on Business Area and Cost Center
Dear Gurus,
<b>Pls Send Some Good Doc's on Business Area and Cost Center.
My mail id is [email protected]</b>
Its Very Urgents.
Regrds
MaheshHello
Check these help links
For Business area:
http://help.sap.com/erp2005_ehp_02/helpdata/en/5f/1fac7c4aee11d189740000e8322d00/frameset.htm
For Cost Center
http://help.sap.com/erp2005_ehp_02/helpdata/en/0b/2a623f507d11d18ee90000e8366fc2/frameset.htm
Reg
*assign points if useful -
Pls send step by step procedure to create generated idoc type in ECC 6.0
Hi
pls send me the step by step procedure In ECC 6.0 Version
1) To create generated idoc type
2) To extended idoc type
3) How we can add structure to custom segments
thanks in advancehi,
check these likns...
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
ALE/ IDOC/ XML
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
IDOC Convertion
/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment
regds,
paras -
What all the thing should be used in order to improve the performance and what all the thing should be avoided ?
Explain abt control brk statement ?
Could you pls give me clear explanation for CHECK,EXIT,STOP ?
In real time, what is the steps which is used for transfer data - BDC
whether call transaction,session method pls explain it
And also explain about the include statement used in BDC
Could you pls answer thisHi
All this AT NEW, AT FIRST, AT END OF and AT LAST are called control break statements of Internal tables and are used to calculate the TOTALS based on sertain key fields in that internal table
FIrst to use these statements the ITAB has to be sorted by the key fields on whcih you need the SUM of the fields.
Some time you will get * when moving data from this int table to other table using these commands
so you have to use
READ TABLE ITAB INDEX SY-TABIX in AT..ENDAT..if you are using other fields between them
DATA: sflight_tab TYPE SORTED TABLE OF sflight
WITH UNIQUE KEY carrid connid fldate,
sflight_wa LIKE LINE OF sflight_tab.
SELECT *
FROM sflight
INTO TABLE sflight_tab.
sort sflight by carrid connid.
LOOP AT sflight_tab INTO sflight_wa.
AT NEW connid.
WRITE: / sflight_wa-carrid,
sflight_wa-connid.
ULINE.
ENDAT.
WRITE: / sflight_wa-fldate,
sflight_wa-seatsocc.
AT END OF connid.
SUM.
ULINE.
WRITE: / 'Sum',
sflight_wa-seatsocc UNDER sflight_wa-seatsocc.
SKIP.
ENDAT.
AT END OF carrid.
SUM.
ULINE.
WRITE: / 'Carrier Sum',
sflight_wa-seatsocc UNDER sflight_wa-seatsocc.
NEW-PAGE.
ENDAT.
AT LAST.
SUM.
WRITE: / 'Overall Sum',
sflight_wa-seatsocc UNDER sflight_wa-seatsocc.
ENDAT.
ENDLOOP.
BDC
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as CLASSICAL METHOD.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
Differences between Call Transaction and Sessions Method:
Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
6) generally used for back ground jobs.
7) at atime we can update to more than one screens.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
6) for background n fore ground jobs.
7) at atime we can update to a single screen.
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
Regards
anji -
Hi All, Pls send me the recording for va01 by handling table control
Hi All, Pls send me the recording for va01 by handling table control with 3 or more materials. Pls send me a flat file and code ASAP.
Thanks®ards.
BharatHere is a example of similar kind ..plz go through this doc..it will be help hul 4 u
How to deal with table control / step loop in BDC?
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen? Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen,
our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
Now, I find a method with which we can determine the number of visible lines on Transaction Screen from our Calling BDC program. Maybe it is useless to you, but I think it will give your some idea.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number; (the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference in Static
ASSIGN and Dynamic ASSIGN.
Now I begin to describe the step to implement my method:
(I use transaction 'ME21', screen 121 for sample, the method using is Call Transation Using..)
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop.
Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data: FixedLine type i, " number of fixed line on a certain screen
LoopLine type i, " the number of lines occupied by one steploop item
FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new
" scrolling screen is empty, otherwise is 1
Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
pageno type i, " you need to scroll screen how many times.
line type i, " number of lines appears on the screen.
index(2) type N, " the screen index for certain item
begin type i, " from parameter of loop
end type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
LoopLine type i (see step 1)
FirstLine type i (see step 2)
DataLine type i ( this is the item number you will enter in transaction)
changing pageno type i (return the number of page, depends on run-time visible line in table control/ Step Loop)
changing line type i.(visible lines one the screen)
data: midd type i,
vline type i, "visible lines
if DataLine eq 0.
Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
pageno = DataLine div vline.
if pageno eq 0.
pageno = pageno + 1.
endif.
elseif FirstLine eq 1.
pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
midd = ( DataLine - 1 ) mod ( vline - 1).
if midd = 0 and DataLine gt 1.
pageno = pageno - 1.
endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
FirstLine type i(see step 2)
LineIndex type i(item index)
changing Index type n. (index on the screen)
if FirstLine = 0.
index = LineIndex mod Line.
if index = '00'.
index = Line.
endif.
elseif FirstLine = 1.
index = LineIndex mod ( Line - 1 ).
if ( index between 1 and 0 ) and LineIndex gt 1.
index = index + Line - 1.
endif.
if Line = 2.
index = index + Line - 1.
endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
DataLine type i
FirstLine type i
loopindex like sy-index
changing begin type i
end type i.
If FirstLine = 0.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loopindex gt 1.
begin = Line * ( loopindex - 1 ) + 1.
end = Line * loopindex.
if end gt DataLine.
end = DataLine.
endif.
endif.
elseif FirstLine = 1.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loop index gt 1.
begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
end = ( Line - 1 ) * ( loopindex - 1 ) + Line.
if end gt DataLine.
end = DataLine.
endif.
endif.
endif.
endform.
Step6 using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index
form creat_bdc.
field-symbols: <material>, <quan>, <indicator>.
data: name1(14) value 'EKPO-EMATN(XX)',
name2(14) value 'EKPO-MENGE(XX)',
name3(15) value 'RM06E-SELKZ(XX)'.
assign: name1 to <material>,
name2 to <quan>,
name3 to <indicator>.
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
perform calrange using Line DataLine FirstLine sy-index
changing begin end.
loop at DataTable from begin to end.
perform calindex using Line FirstLine DataTable-LineIndex changing Index.
name1+11(2) = Index.
name2+11(2) = Index.
name3+12(2) = Index.
perform bdcfield using <material> DataTable-matnr.
perform bdcfield using <quan> DataTable-menge.
perform bdcfield using <indicator> DataTable-indicator.
endloop.
enddo.
Sample code
Following is a sample code of handling table control in BDC.
REPORT Y730_BDC5 .
*HANDLING TABLE CONTROL IN BDC
DATA : BEGIN OF IT_DUMMY OCCURS 0,
DUMMY(100) TYPE C,
END OF IT_DUMMY.
DATA : BEGIN OF IT_XK01 OCCURS 0,
LIFNR(10) TYPE C,
BUKRS(4) TYPE C,
EKORG(4) TYPE C,
KTOKK(4) TYPE C,
NAME1(30) TYPE C,
SORTL(10) TYPE C,
LAND1(3) TYPE C,
SPRAS(2) TYPE C,
AKONT(6) TYPE C,
FDGRV(2) TYPE C,
WAERS(3) TYPE C,
END OF IT_XK01,
BEGIN OF IT_BANK OCCURS 0,
BANKS(3) TYPE C,
BANKL(10) TYPE C,
BANKN(10) TYPE C,
KOINH(30) TYPE C,
LIFNR(10) TYPE C,
END OF IT_BANK.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = 'C:\VENDOR.TXT'
FILETYPE = 'ASC'
TABLES
DATA_TAB = IT_DUMMY.
LOOP AT IT_DUMMY.
IF IT_DUMMY-DUMMY+0(2) = '11'.
IT_XK01-LIFNR = IT_DUMMY-DUMMY+2(10).
IT_XK01-BUKRS = IT_DUMMY-DUMMY+12(4).
IT_XK01-EKORG = IT_DUMMY-DUMMY+16(4).
IT_XK01-KTOKK = IT_DUMMY-DUMMY+20(4).
IT_XK01-NAME1 = IT_DUMMY-DUMMY+24(30).
IT_XK01-SORTL = IT_DUMMY-DUMMY+54(10).
IT_XK01-LAND1 = IT_DUMMY-DUMMY+64(3).
IT_XK01-SPRAS = IT_DUMMY-DUMMY+67(2).
IT_XK01-AKONT = IT_DUMMY-DUMMY+69(6).
IT_XK01-FDGRV = IT_DUMMY-DUMMY+75(2).
IT_XK01-WAERS = IT_DUMMY-DUMMY+77(3).
APPEND IT_XK01.
ELSE.
IT_BANK-BANKS = IT_DUMMY-DUMMY+2(3).
IT_BANK-BANKL = IT_DUMMY-DUMMY+5(10).
IT_BANK-BANKN = IT_DUMMY-DUMMY+15(10).
IT_BANK-KOINH = IT_DUMMY-DUMMY+25(30).
IT_BANK-LIFNR = IT_DUMMY-DUMMY+55(10).
APPEND IT_BANK.
ENDIF.
ENDLOOP.
LOOP AT IT_XK01.
REFRESH IT_BDCDATA.
perform bdc_dynpro using 'SAPMF02K' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-REF_LIFNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR'
IT_XK01-LIFNR.
perform bdc_field using 'RF02K-BUKRS'
IT_XK01-BUKRS.
perform bdc_field using 'RF02K-EKORG'
IT_XK01-EKORG.
perform bdc_field using 'RF02K-KTOKK'
IT_XK01-KTOKK.
perform bdc_dynpro using 'SAPMF02K' '0110'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-TELX1'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFA1-NAME1'
IT_XK01-NAME1.
perform bdc_field using 'LFA1-SORTL'
IT_XK01-SORTL.
perform bdc_field using 'LFA1-LAND1'
IT_XK01-LAND1.
perform bdc_field using 'LFA1-SPRAS'
IT_XK01-SPRAS.
perform bdc_dynpro using 'SAPMF02K' '0120'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-KUNNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-KOINH(02)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
DATA : FNAM(20) TYPE C,
IDX TYPE C.
MOVE 1 TO IDX.
LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.
CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKS.
CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKL.
CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKN.
CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-KOINH.
IDX = IDX + 1.
ENDLOOP.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-BANKS(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPMF02K' '0210'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-FDGRV'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFB1-AKONT'
IT_XK01-AKONT.
perform bdc_field using 'LFB1-FDGRV'
IT_XK01-FDGRV.
perform bdc_dynpro using 'SAPMF02K' '0215'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-ZTERM'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0220'.
perform bdc_field using 'BDC_CURSOR'
'LFB5-MAHNA'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0310'.
perform bdc_field using 'BDC_CURSOR'
'LFM1-WAERS'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFM1-WAERS'
IT_XK01-WAERS.
perform bdc_dynpro using 'SAPMF02K' '0320'.
perform bdc_field using 'BDC_CURSOR'
'WYT3-PARVW(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
CALL TRANSACTION 'XK01' USING IT_BDCDATA
MODE 'A'
UPDATE 'S'
MESSAGES INTO IT_BDCMSGCOLL.
ENDLOOP.
FORM BDC_DYNPRO USING PROG SCR.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROG.
IT_BDCDATA-DYNPRO = SCR.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.
Reward if helpful -
Pls send me Importent Basis R/3 FAQ's
Hi,
interview purpuse pls send me important Basis Faq's and also pls send me realtime scenarios .If you help I will give more reward points.and also if possible give answers also.
regards,
janaHi,
Search SAP.com FAQ.
1. What is SAP MMC good for?
a) Starting SAP instances
b) Viewing developer traces
c) Stopping SAP instances
d) Deploying SAPGUI
ANSWERS: A, B and C
The SAP MMC has multiple uses. Among them: starting/stopping instances and viewing/analyzing the developer traces (dev_disp, dev_ms, dev_w*).
Ignore the myths -- the reality is that SAP MMC can be installed on remote computers to manage SAP instances the same way as if you were using the actual SAP server. Find the SAP MMC installation components on the SAPGUI CD.
2. The following is true about Kerberos single sign-on (Kerberos 5 SSO):
a) It's only supported in UNIX environments
b) It provides encrypted authentication
c) It works in all Windows platforms
d) It's an SAP add-on available as of Web AS 6.10
ANSWERS: B
Kerberos is available in UNIX and Windows platforms. However, it only works with Windows 2000 and Windows Server 2003 Active Domain Controllers. Windows NT is not suitable for Kerberos 5. It provides encryption, which makes it a better option than regular Secure Single Sign-On. Kerberos SSO has been available since R/3 3.1x.
3. True or False? Since the release of SQL Server 2000, database integrity checks -- and DBCC CHECKDB in particular-- are a thing of the past in SAP.
a) True
b) False
ANSWERS: B
False! DBCCs (checkcatalog and checkdb) are definitely required and they should be performed on a regular basis.
4. What does report RSUSR003 do?
a) Lists logon system settings
b) Reports if passwords for SAP* accounts have not changed
c) Reports if passwords for DDIC are trivial
d) All of the above
ANSWERS: D
Report RSUSR003 lists all logon system settings and it reports if passwords for accounts SAP*, DDIC, SAPCPIC and EARLYWATCH are trivial. That is, the system will report the passwords for those accounts that have not been changed from the delivered ones. This is a handy report SAP auditors frequently ask for it immediately when doing an SAP audit
5. To prevent the use of common password combinations, a system can be set up to include:
a) A list of forbidden passwords in table USR40
b) Instance profile parameter "login/min_password_digits"
c) A list of forbidden passwords in table USR04.
d) No additional configuration, as SAP only allows complex passwords.
ANSWERS: A, B
To avoid this problem, populate Table USR40 with forbidden or illegal passwords combinations. Also, as of Web AS 6.10, instance profile parameter "login/min_password_digits" can be set to a value >= 1 to force users enter at least one digit in their password.
6. After a new installation of R/3 Enterprise, the system has a temporary license. How long does this license last?
a) Four months
b) Four weeks
c) Four days
d) Fourteen days
ANSWERS: B
This temporary license lasts up to four weeks. After that, nobody can log into the system except SAP. Therefore, users must request a permanent license at the early stages of an installation.
7. What is CUA?
a) It's the Control Upgrade Administration program, used during an SAP upgrade.
b) It stands for Central User Administration, where a central client manages all user accounts.
ANSWER: B
Central User Administration (CUA) was introduced in R/3 4.6 to provide a mechanism that allows central user management. Once configured, all user accounts are managed from a central client
. To prevent having to adjust output devices (e.g. print queue definitions) in every system each time they are transported from one system to another, an administrator can:
a) Set up a logical spool server by the same name in the source system and the target systems
b) Set up all printers to use "__DEFAULT" as the host printer
ANSWER: A
A logical spool server mapped to the real spool server can solve this problem by adjusting output devices after importing them.
For example, logical spool server "logicalspooler" can be set up in the customizing, quality assurance and production systems; printers get assigned to this spool server and they get transported. Because "logicalspooler" exists on the target systems, there is no need to change anything after the transport is imported.
9. True or False? In order to read developer traces, you have to go the operating system, because SAP does not have a way to do this within the application.
a) True
b) False
ANSWER: B
False! SAP provides transaction ST11 for this purpose. ST11 can even sort the trace files by date and time.
10. How can the logon screen be modified to include informational text, such as the company name, address, the system role, etc.?
a) Run transaction SE61, create object ZLOGIN_SCREEN_INFO and enter the desired text.
b) Ask SAP to modify the logon screen for you.
c) Using a C or C++ recompile SAPGUI.exe with the new text.
ANSWER: A
As of SAP version 4.6, transaction SE61 can be used to create object ZLOGIN_SCREEN_INFO. Text and icons can be added to messages that can appear at the logon screen.
11. True or False? MS-SQL Server can be installed using all the delivered default settings. Everything is controlled within the application, so SAP requires only a database engine to work.
a) True
b) False
ANSWER: B
False! MS-SQL Server needs to be configured with binary sort order and 850 multilingual character set. Therefore, using all defaults during a SQL Server installation will not work. The SAP installation program will fail.
12. What SAP transaction can assist in detecting I/O bottlenecks?
a) ST22
b) ST06
c) OS06
d) ST10
ANSWER: B, C
Either ST06 or OS06 can monitor disk I/O. These transactions are very convenient, as you do not have to go to the OS level. On the other hand, tools at the OS level may offer a more detailed analysis (e.g. Performance Monitor in Windows).
13. What does transaction SPAM do?
a) It configures the system to block spam e-mail in the business workplace.
b) It defines and import support package queues.
c) It displays the support packages that have been imported into the system.
d) Nothing. It's not an SAP transaction.
ANSWER: B, C
Transaction SPAM not only lists the support packages that have been imported into the system, but it also defines queues of support packages that can be imported. It's also the transaction that carries out the import.
14. If an SAP instance does not start after making changes to the instance profile via RZ10, what is the best course of action?
a) Restore the database from the last full backup
b) Edit the profile at the operating system level and manually change it back to the way it was. Then, restart the instance and correct the problem via RZ10.
c) Copy the instance profile from a working system into the affected system. d) Log a trouble ticket at the SAP Support Portal
ANSWER: B
In an emergency, the best thing to do is to manually edit and correct the problem in the instance profile (located under usrsapsysprofile). After successfully restarting the instance run RZ10 and correct the problem there. Save and activate the profile. If possible restart the instance right away and make sure everything works. Otherwise, plan on keeping a close eye on the instance the next time it restarts.
Restoring the database from a full backup will erase all the work done since the backup ended to the moment the problem occurred. Copying the instance profile from another system is a bad idea. The profiles are unique and contain hard coded values. Logging a trouble ticket is not necessary unless you cannot absolutely bring the system back up.
15. Which of the following are possible ways to display the R/3 Kernel patch of a system?
a) Run SM51 and click Release Notes
b) Run disp+work version at the OS level
c) Run SPAM, choose Imported Support Packages and click Display
d) Run SQ01 and click Kernel Patches
ANSWER: A, B
Within SAP run SM51, click Release Notes, and then read the line that says "Kernel Patch number." At the OS level, change it to the:
usrsapsysexerun directory and run dispwork version or dispwork V
Also, look for the "kernel patch number" line.
Useful UNIX SAP Commands.
Basic UNIX commands
Note: not all of these are actually part of UNIX itself, and you may not find them on all UNIX machines. But they can all be used on turing in essentially the same way, by typing the command and hitting return. Note that some of these commands are different on non-Solaris machines - see SunOS differences.
If you've made a typo, the easiest thing to do is hit CTRL-u to cancel the whole line. But you can also edit the command line (see the guide to More UNIX).
UNIX is case-sensitive.
Files
ls --- lists your files
ls -l --- lists your files in 'long format', which contains lots of useful information, e.g. the exact size of the file, who owns the file and who has the right to look at it, and when it was last modified.
ls -a --- lists all files, including the ones whose filenames begin in a dot, which you do not always want to see.
There are many more options, for example to list files by size, by date, recursively etc.
more filename --- shows the first part of a file, just as much as will fit on one screen. Just hit the space bar to see more or q to quit. You can use /pattern to search for a pattern.
emacs filename --- is an editor that lets you create and edit a file. See the emacs page.
mv filename1 filename2 --- moves a file (i.e. gives it a different name, or moves it into a different directory (see below)
cp filename1 filename2 --- copies a file
rm filename --- removes a file. It is wise to use the option rm -i, which will ask you for confirmation before actually deleting anything. You can make this your default by making an alias in your .cshrc file.
diff filename1 filename2 --- compares files, and shows where they differ
wc filename --- tells you how many lines, words, and characters there are in a file
chmod options filename --- lets you change the read, write, and execute permissions on your files. The default is that only you can look at them and change them, but you may sometimes want to change these permissions. For example, chmod o+r filename will make the file readable for everyone, and chmod o-r filename will make it unreadable for others again. Note that for someone to be able to actually look at the file the directories it is in need to be at least executable. See help protection for more details.
File Compression
o gzip filename --- compresses files, so that they take up much less space. Usually text files compress to about half their original size, but it depends very much on the size of the file and the nature of the contents. There are other tools for this purpose, too (e.g. compress), but gzip usually gives the highest compression rate. Gzip produces files with the ending '.gz' appended to the original filename.
o gunzip filename --- uncompresses files compressed by gzip.
o gzcat filename --- lets you look at a gzipped file without actually having to gunzip it (same as gunzip -c). You can even print it directly, using gzcat filename | lpr
printing
o lpr filename --- print. Use the -P option to specify the printer name if you want to use a printer other than your default printer. For example, if you want to print double-sided, use 'lpr -Pvalkyr-d', or if you're at CSLI, you may want to use 'lpr -Pcord115-d'. See 'help printers' for more information about printers and their locations.
o lpq --- check out the printer queue, e.g. to get the number needed for removal, or to see how many other files will be printed before yours will come out
o lprm jobnumber --- remove something from the printer queue. You can find the job number by using lpq. Theoretically you also have to specify a printer name, but this isn't necessary as long as you use your default printer in the department.
o genscript --- converts plain text files into postscript for printing, and gives you some options for formatting. Consider making an alias like alias ecop 'genscript -2 -r \!* | lpr -h -Pvalkyr' to print two pages on one piece of paper.
o dvips filename --- print .dvi files (i.e. files produced by LaTeX). You can use dviselect to print only selected pages. See the LaTeX page for more information about how to save paper when printing drafts.
Directories
Directories, like folders on a Macintosh, are used to group files together in a hierarchical structure.
mkdir dirname --- make a new directory
cd dirname --- change directory. You basically 'go' to another directory, and you will see the files in that directory when you do 'ls'. You always start out in your 'home directory', and you can get back there by typing 'cd' without arguments. 'cd ..' will get you one level up from your current position. You don't have to walk along step by step - you can make big leaps or avoid walking around by specifying pathnames.
pwd --- tells you where you currently are.
Finding things
ff --- find files anywhere on the system. This can be extremely useful if you've forgotten in which directory you put a file, but do remember the name. In fact, if you use ff -p you don't even need the full name, just the beginning. This can also be useful for finding other things on the system, e.g. documentation.
grep string filename(s) --- looks for the string in the files. This can be useful a lot of purposes, e.g. finding the right file among many, figuring out which is the right version of something, and even doing serious corpus work. grep comes in several varieties (grep, egrep, and fgrep) and has a lot of very flexible options. Check out the man pages if this sounds good to you.
About other people
w --- tells you who's logged in, and what they're doing. Especially useful: the 'idle' part. This allows you to see whether they're actually sitting there typing away at their keyboards right at the moment.
who --- tells you who's logged on, and where they're coming from. Useful if you're looking for someone who's actually physically in the same building as you, or in some other particular location.
finger username --- gives you lots of information about that user, e.g. when they last read their mail and whether they're logged in. Often people put other practical information, such as phone numbers and addresses, in a file called .plan. This information is also displayed by 'finger'.
last -1 username --- tells you when the user last logged on and off and from where. Without any options, last will give you a list of everyone's logins.
talk username --- lets you have a (typed) conversation with another user
write username --- lets you exchange one-line messages with another user
elm --- lets you send e-mail messages to people around the world (and, of course, read them). It's not the only mailer you can use, but the one we recommend. See the elm page, and find out about the departmental mailing lists (which you can also find in /user/linguistics/helpfile).
About your (electronic) self
whoami --- returns your username. Sounds useless, but isn't. You may need to find out who it is who forgot to log out somewhere, and make sure you have logged out.
finger & .plan files
of course you can finger yourself, too. That can be useful e.g. as a quick check whether you got new mail. Try to create a useful .plan file soon. Look at other people's .plan files for ideas. The file needs to be readable for everyone in order to be visible through 'finger'. Do 'chmod a+r .plan' if necessary. You should realize that this information is accessible from anywhere in the world, not just to other people on turing.
passwd --- lets you change your password, which you should do regularly (at least once a year). See the LRB guide and/or look at help password.
ps -u yourusername --- lists your processes. Contains lots of information about them, including the process ID, which you need if you have to kill a process. Normally, when you have been kicked out of a dialin session or have otherwise managed to get yourself disconnected abruptly, this list will contain the processes you need to kill. Those may include the shell (tcsh or whatever you're using), and anything you were running, for example emacs or elm. Be careful not to kill your current shell - the one with the number closer to the one of the ps command you're currently running. But if it happens, don't panic. Just try again If you're using an X-display you may have to kill some X processes before you can start them again. These will show only when you use ps -efl, because they're root processes.
kill PID --- kills (ends) the processes with the ID you gave. This works only for your own processes, of course. Get the ID by using ps. If the process doesn't 'die' properly, use the option -9. But attempt without that option first, because it doesn't give the process a chance to finish possibly important business before dying. You may need to kill processes for example if your modem connection was interrupted and you didn't get logged out properly, which sometimes happens.
quota -v --- show what your disk quota is (i.e. how much space you have to store files), how much you're actually using, and in case you've exceeded your quota (which you'll be given an automatic warning about by the system) how much time you have left to sort them out (by deleting or gzipping some, or moving them to your own computer).
du filename --- shows the disk usage of the files and directories in filename (without argument the current directory is used). du -s gives only a total.
last yourusername --- lists your last logins. Can be a useful memory aid for when you were where, how long you've been working for, and keeping track of your phonebill if you're making a non-local phonecall for dialling in.
Connecting to the outside world
nn --- allows you to read news. It will first let you read the news local to turing, and then the remote news. If you want to read only the local or remote news, you can use nnl or nnr, respectively. To learn more about nn type nn, then \tty{:man}, then \tty{=.*}, then \tty, then hit the space bar to step through the manual. Or look at the man page. Or check out the hypertext nn FAQ - probably the easiest and most fun way to go.
rlogin hostname --- lets you connect to a remote host
telnet hostname --- also lets you connect to a remote host. Use rlogin whenever possible.
ftp hostname --- lets you download files from a remote host which is set up as an ftp-server. This is a common method for exchanging academic papers and drafts. If you need to make a paper of yours available in this way, you can (temporarily) put a copy in /user/ftp/pub/TMP. For more permanent solutions, ask Emma. The most important commands within ftp are get for getting files from the remote machine, and put for putting them there (mget and mput let you specify more than one file at once). Sounds straightforward, but be sure not to confuse the two, especially when your physical location doesn't correspond to the direction of the ftp connection you're making. ftp just overwrites files with the same filename. If you're transferring anything other than ASCII text, use binary mode.
lynx --- lets you browse the web from an ordinary terminal. Of course you can see only the text, not the pictures. You can type any URL as an argument to the G command. When you're doing this from any Stanford host you can leave out the .stanford.edu part of the URL when connecting to Stanford URLs. Type H at any time to learn more about lynx, and Q to exit.
Miscellaneous tools
webster word --- looks up the word in an electronic version of Webster's dictionary and returns the definition(s)
date --- shows the current date and time.
cal --- shows a calendar of the current month. Use e.g., 'cal 10 1995' to get that for October 95, or 'cal 1995' to get the whole year.
You can find out more about these commands by looking up their manpages:
man commandname --- shows you the manual page for the command
For further ways of obtaining help, look at the pages with electronic sources of information and non-electronic sources.
More UNIX commands
Back up to the Main Computing Page
The root Directory
Command ls / this command lists the root directory
[agustin@server2 agustin]$ ls /
bin/ boot/ dev/ etc/ home/ initrd/ lib/ mnt/ opt/
proc/ root/ sbin/ tmp/ usr/ var/
Throughout the decade, developers had tried to define standards for the file system hierarchy and for what each of these directories should be used for. But even with the efforts of all these people there are still variations among all distributions.
/ root directory of the entire system
/bin holds system executables
/sbin holds system executables and are essential for starting up the system
/boot holds the files needed during the booting process including the kernel
/dev it is a special directory that holds information regarding peripherals /dev/ttys0, /dev/had, etc.
/home holds all the home directories for all users except root
/lib holds system binary libraries, shared libraries and kernel module
/opt here is where optional applications might go
/root this is the home directory for super user, do not confuse this folder with /
/tmp Here is where temporary files are stored; it is usually emptied when systems restart.
/var is where variable system files go, system logging, file locks, printer Spooling, mail spooling and many others.
/etc This directory holds almost all configuration files. As administrator you will spending most of your time tweaking settings in this folder.
/initrd this directory is used at boot time, in the initrd to perform pivot_root
/mnt This directory is used as a mount point. Here you can temporarily mount medias such as CD-ROM, zip and other file systems. Example: /mnt/windows, /mnt/floppy, mnt/cd-rom
/proc this directory is used as a kernel information access hooks, example of usage:
[agustin@server2 proc]$cat cpuinfo
[agustin@server2 agustin]$cat filesystems
/usr It is a very large directory, holds application programs; it also has several important additional directories.
/usr/bin contains binaries executables
/usr/include This directory contains C headers with various libraries applications.
/usr/local application programs used locally
The Print working directory command: pwd
[agustin@server2 agustin]$ pwd
/home/agustin
[agustin@server2 agustin]$
The command whoami, displays who you are at the current prompt
[agustin@server2 agustin]$ whoami
agustin
[agustin@server2 agustin]$
If you want to know who is logged into the entire system use the who command
[agustin@server2 agustin]$ who
agustin vc/1 Aug 17 07:38
root vc/2 Aug 19 06:51
user1 vc/3 Aug 19 06:46
[agustin@server2 agustin]$
Switching from regular user to root
To gain root's power temporarily use: su
[agustin@server2 agustin]$ su
Password:******* (when you are typing the password, you can not see it)
[root@server2 agustin]# whoami
root
[root@server2 agustin]#
Observe your prompt, it has been changed. When you are in this mode you can do anything; be careful how you use the super user account. Protect the root account at all cost.
The root account is strictly used for system administration. Any regular user cannot do things that are strictly for root unless root grants the right to the user. -
hi,
I have requirement to send data from R/3 to R/3 .Pls send me step by step procedure.
Thanks®ards
RaviHi
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
>>>> SAP ALE & IDOC<<<<
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
Create a Customer Distribution Model (CDM);
Add appropriate message types and filters to the CDM;
Generate outbound partner profiles;
Distribute the CDM to the receiving systems; and
Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
Check these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
Please check this PDF documents for ALE and IDoc.
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
<b>Reward points for useful Answers</b>
Regards
Anji -
Hi pls send me the ppts and documenation to understand MM
Hi
i am an abaper i want to know about mm
pls send me the ppts and documenation to understand MMHi,
MM Cycle:
Purchase Requisition-> STaff in an orgn places Pur requisition for want of some goods/products - ME51
Request for Quotation(RFQ)-> The Purchase dept in the orgn calls/requests for the quotation for the products against which PR was raised. - ME41
Vendor Evaluation->After receving the RFQ's, after comparison a Vendor is finalised based on the terms and conditions.
Purchase Order(PO)-> Pur order was issued to that vendor asking him to supply the goods/products -ME21N
Goods Receipt Note(GRN)->Vendor supplies the material/Products to the orgn-
MB01
Goods Issue (GI) -> People receives their respective itesm for which they have placed the Requisitions
Invoice Verification-> ALong with the Material Vendor submits a Invoice for which the Company Pays the amount - .MIRO
Data to FI -> data will be posted to FI as per the vendor invoices
you better go through all these links u will get all the info what ever u need
for mm
http://www.sapgenie.com/abap/tables_mm.htm
http://www.sap-img.com/sap-download/sap-tables.zip
http://www.allsaplinks.com/material_management.html
http://www.training-classes.com/course_hierarchy/courses/2614_SAP_R_3_MM_Invoice_Verification_-_Rel_4_x.php
http://www.sapfriends.com/sapstuff.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSMAT/PSMAT.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCMM/CAARCMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOMDMM/LOMDMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMMM/BCBMTWFMMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMIVMVAL/MMIVMVAL.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMWMLVS/MMWMLVS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMISVE/MMISVE.pdf
<b>Reward Points for helpful answers</b>,
Satish -
COULD YOU PLS HELP ME TO FIX REPEATED OBJECT ISSUE.
Hello
We are migrating ND5 application into Iplanet. I am not getting
any idea to migrate the following ND code into Iplanet.Could
you please help me to fix problem.If anybody handled with repeated
objects could you please send migrate code for the following
ND CODE.
CSpRepeated repeated =(CSpRepeated) event.getSource();
CSpStaticText stFieldName =(CSpStaticText)
repeated.getDisplayField("stFieldName");
CSpStaticText stCurrentValue =(CSpStaticText)
repeated.getDisplayField("stCurrentValue");
CSpStaticText stNewValue =(CSpStaticText)
repeated.getDisplayField("stNewValue");
CSpStaticText stUpdateType =(CSpStaticText)
repeated.getDisplayField("stUpdateType");
CSpStaticText stAuthorisers =(CSpStaticText)
repeated.getDisplayField("stAuthorisers");
int index = event.getRowIndex();
Thanks
Rao
----- Original Message -----
From: "Yathiraju K" <yathiraj.kan@w...>
Date: Friday, July 6, 2001 10:27 pm
Subject: Re: [iPlanet-JATO] execution context
Todd,
Let me explain you this way. Suppose I set MaxdisplayTiles(150)
and there
are only 134 rows in the table. FirstTime it displays 134 rows.
Now my requirement is that if I press next button, and since there
are only
134 rows, I want to display the same set of rows,
i.e., 0-134 again on the click of next button. Now since the model is
getting executed in an incremental approach,
the no of rows returned are zero in the next web action. I wanted to
override this incremental approach which is incorporated in
the execution context as per my understanding( I suppose am not
wrong).
So I was trying to do setAutoRetrieveExecutionContext(context)
with context
being set to (0,9999) in beforeModelExecutes.
I want to execute the model from the starting of the table again.
And this
is not working.
Probably I should do this before calling super.beginDisplay().
thanks,
raju.
----- Original Message -----
From: Todd Fast <toddwork@c...>
Sent: Saturday, July 07, 2001 3:35 AM
Subject: Re: [iPlanet-JATO] execution context
Raju.--
I think this is what you would expect with these settings, no? If you set
maxDisplayTiles to 9999, but you only see 134 rows, there are no more rows
to display when the next button is activated. There are only 134 rows in
the result set. JATO assumes that if you tell it 9999 rows aredisplayable,
and invoke a Next web action, the result set is larger than 9999 rows.> Otherwise, what's the Next web action for?
Todd
----- Original Message -----
From: "Yathiraju K" <yathiraj.kan@w...>
Sent: Friday, July 06, 2001 8:51 AM
Subject: [iPlanet-JATO] execution context
I am working on a page which is bound to a model.
I am setting maxdisplayTiles(9999) in the constructor.
when it first retrieves the model while executing
autoRetrievingModel, I
am getting 134 rows. Thats fine.
The page has the next button fucntionality. When next time it
executesthe
model, it is taking offset as 9999 and zero rows are returned.
This has been noticed inspite of setting the following in the
beforemodel
executes.
DatasetModelExecutionContextImpl context = newDatasetModelExecutionContextImpl(0,9999);
setAutoRetrieveExecutionContext(context);
any solution to this is very much appreciated.
thanks,
raju.
[Non-text portions of this message have been removed]
[email protected]
[email protected]
[email protected]Hi Rao,
I assume the code is a part of the viewbean , say pgAViewBean. And
pgAViewBean has a repeated field rB. In that case, the code can be migrated
as below :
String stFieldName = getRB().getStFieldName().stringValue();
Similarly for other fields.
int index = event.getRowIndex();
can be migrated as
int index = getTileIndex();
Thanks,
Subir.
SNR R wrote:
Hello
We are migrating ND5 application into Iplanet. I am not getting
any idea to migrate the following ND code into Iplanet.Could
you please help me to fix problem.If anybody handled with repeated
objects could you please send migrate code for the following
ND CODE.
CSpRepeated repeated =(CSpRepeated) event.getSource();
CSpStaticText stFieldName =(CSpStaticText)
repeated.getDisplayField("stFieldName");
CSpStaticText stCurrentValue =(CSpStaticText)
repeated.getDisplayField("stCurrentValue");
CSpStaticText stNewValue =(CSpStaticText)
repeated.getDisplayField("stNewValue");
CSpStaticText stUpdateType =(CSpStaticText)
repeated.getDisplayField("stUpdateType");
CSpStaticText stAuthorisers =(CSpStaticText)
repeated.getDisplayField("stAuthorisers");
int index = event.getRowIndex();
Thanks
Rao
----- Original Message -----
From: "Yathiraju K" <yathiraj.kan@w...>
Date: Friday, July 6, 2001 10:27 pm
Subject: Re: [iPlanet-JATO] execution context
Todd,
Let me explain you this way. Suppose I set MaxdisplayTiles(150)
and there
are only 134 rows in the table. FirstTime it displays 134 rows.
Now my requirement is that if I press next button, and since there
are only
134 rows, I want to display the same set of rows,
i.e., 0-134 again on the click of next button. Now since the model is
getting executed in an incremental approach,
the no of rows returned are zero in the next web action. I wanted to
override this incremental approach which is incorporated in
the execution context as per my understanding( I suppose am not
wrong).
So I was trying to do setAutoRetrieveExecutionContext(context)
with context
being set to (0,9999) in beforeModelExecutes.
I want to execute the model from the starting of the table again.
And this
is not working.
Probably I should do this before calling super.beginDisplay().
thanks,
raju.
----- Original Message -----
From: Todd Fast <toddwork@c...>
Sent: Saturday, July 07, 2001 3:35 AM
Subject: Re: [iPlanet-JATO] execution context
Raju.--
I think this is what you would expect with these settings, no?If you set
maxDisplayTiles to 9999, but you only see 134 rows, there are nomore rows
to display when the next button is activated. There are only134 rows in
the result set. JATO assumes that if you tell it 9999 rows aredisplayable,
and invoke a Next web action, the result set is larger than 9999rows.> Otherwise, what's the Next web action for?
Todd
----- Original Message -----
From: "Yathiraju K" <yathiraj.kan@w...>
Sent: Friday, July 06, 2001 8:51 AM
Subject: [iPlanet-JATO] execution context
I am working on a page which is bound to a model.
I am setting maxdisplayTiles(9999) in the constructor.
when it first retrieves the model while executing
autoRetrievingModel, I
am getting 134 rows. Thats fine.
The page has the next button fucntionality. When next time it
executesthe
model, it is taking offset as 9999 and zero rows are returned.
This has been noticed inspite of setting the following in the
beforemodel
executes.
DatasetModelExecutionContextImpl context = newDatasetModelExecutionContextImpl(0,9999);
setAutoRetrieveExecutionContext(context);
any solution to this is very much appreciated.
thanks,
raju.
[Non-text portions of this message have been removed]
[email protected]
[email protected]
[email protected]
[email protected]
The Information contained and transmitted by this E-MAIL is proprietary to
Wipro Limited and is intended for use only by the individual or entity to
which
it is addressed, and may contain information that is privileged, confidential
or
exempt from disclosure under applicable law. If this is a forwarded message,
the content of this E-MAIL may not have been sent with the authority of the
Company. If you are not the intended recipient, an agent of the intended
recipient or a person responsible for delivering the information to the named
recipient, you are notified that any use, distribution, transmission,
printing,
copying or dissemination of this information in any way or in any manner is
strictly prohibited. If you have received this communication in error, please
delete this mail & notify us immediately at mailadmin@w...
[Non-text portions of this message have been removed]
Maybe you are looking for
-
Negative Entries and Closing Balance of RG1 Register
Hi, We are updating our RG1 register with copy of movement type 311 & 312. We are using copy of movement type 311 for incoming entries in RG1 Register and copy of movement type 312 for the reversal. But in the table J_1IRG1, we can see only positive
-
Hi I have been wondering how many phones can I have on one contract
The reason for this is ,I have myself,my wife and 3 boys who all have separate contracts that I pay for costing me a small fortune a month.so when it comes up for upgrade is their a contract that allows a number of phones on one contract that will ke
-
Custom object in work flow not opening in CRM webclient ui
Hi, I have designed a workflow in SAP Ecc 6.0 CRM. There are some work items and a single custom popup screen in this workflow. This popup screen is used to get data and pass to the subsequent workitem. This screen opens in SAP CRM in the workflow in
-
Where can I find website templates that are editable by both Mac and PC
I need advice as to where I can get a website template(s) that can be edited with BOTH Mac and PC. (I am on a Mac, the other person working on this same project is using a PC.) I am proficient in Adobe Photoshop, Illustrator, and InDesign for Print,
-
ICal crawling SO SLOOOOOOWWW! Please Help!
It's actually on my sister-in-laws 1.6ghz G5 Powermac, but I have run out of ideas to try and help her.. Granted, she has about 17 very full calenders, but there is definitely something wrong.... iCal takes about 8 seconds to launch, moving from fiel