Couldnot see master data

hi guys,
I am trying to load Master data attr,text,hierarchy for one infoobject.
we have master data setup like this:
each year have one hierarchy and its classified as version
each year has one set of Master data text and attributes....as Master data donot support verion dependency...we created simulated time dependency..i.e, we load master data every year and mark it as time dependent....in one customised table we will store which year masterdata is which version...
for year 2009...its version 6......so while executing reports...if u enter 6 in variable...it picks 2009 master data,as I understood from documents....
Now my doubt is....
I loaded MD for two years using process chains....source system is csv files....To check if data is loaded properly,right-click on
Infoobject...Maintain master data...choose selections.....it doesnot show master data pertaining to last two data loads...
I included ATTRIBUTE CHANGE RUN in Process chain also...
then I clicked on 'Manage' of Infoobject attribute icon....I am able to see request I loaded and no-of records transferred....
I couldnot get what happened and how I can fix this?
Thanks alot.

Hello authors!!¨
Thanks for your replies.
I couldnot get it clearly what you mean.My doubts are:
1.If we have 100 records in file(or other source systems) and only see 50 records in MD target(because of routines in between)....how do we validate if data is loaded correctly?Krishna said...'take data input and validate against code'...what does that mean?
2.If we are loading master data....it seems like duplicate records for same key will not be loaded....
a)are they stopped on way to PSA or somewhere else in data flow?
b)Is this natural property of master data or do we do any settings?
3.where do we put settings to make particular infoobject KEY (many are talking about keys in BW) in BW?I can think that we make characteristic infoobject as KEY ..but can we make keyfigure infoobject also as a KEY?
thanks for your patience...

Similar Messages

Unable to see master data changes

I added a new field as an Attribute to Master Data (Customer Number) and loaded the data which was successfull. I created an infoset and created a report but am unable to see the values in this new field. I check 'Values in the Infoprovider' on the reports. Also when i go to RSISET and look for Infoset Values I do not see them there.

Hi,
I think there are two things you should check:
1. Have you seen the data for which you added into the attribute in your InfoObject?
2. Have you seen the field which you added into the attribute in your InfoSet?
If you got a "NO" answer, you maybe lose step(s).
Hope above helps you.

Delete Master Data - with or without sids

Hi
i am working on 0customer_attr
now when i right click and see master data it has 100 records
the same in r3 has 85 records.
so i thought i will try to delete master data and then load again.
so i right cick on 0customer and choose Delete master data.
now if i go back and see data for 0customer it still exists.
q1. what is the approach to delete and reload master data so between r3 and bw synchronization exists ???
q2. should i select with SIDS or without SIDS ???
how to rectify this error.
thank

Hi,
Q1..how can i find which transaction data is using those records ?
Doubleclick on the Master data IO. In the right pane you will find "Where-Used List" option. Click on that. It will give you the entire list of BW objects(DSO, Cube etc) in which your Master data IO is used.
q2. How can i delete transaction data
Right click on the Data targets(DSO, Cube etc) in which your master data IO is used, select the option Delete Data.
(or) Right click on the Data targets(DSO, Cube)>Manage>Select the Request-->Delete
q3. i dont see anything in psa,, it is master data so is that why there is no psa ??
Though it is a Master data, you should have loaded the data via DS so PSA will be there. It is possible that you might have deleted the PSA data.
Do one thing, delete all the Transactional Data(follow Q2 ans), then delete Master Data contents. Then do the loading again.
Hope it helps!
Regards,
Pavan

Transport direct update master data

Hi
I am trying to transport master data infoobject and its corresponding trans.stru and comm.structure.
When I go to transport connection from rsa1, select object type infosource, I cant see master data infosource. I can only see flexible updata sources!!! What is the procedure to collect transfer stru and comm.stru for direct update method?
I can see master data data source in the object type data source. If I collect just infobject and data source will it collect comm.stru and transfer stru automatically when I transport to Quality?
Please explain in detail.
Thanks in advance

Hi netin
go to SE03
search the R3TR Trasfer structure and check in which of the requests does this Object have.. so check the sequence of the objects in the production and then start importing the requests in Production same as the sequence how u have imported in the QA..
hope it helps
regards
AK

Not able to see the records in master data

Hi friends
My requirement needs the data to be loaded from a RDM table.I created a data source in the R/3 and by using the extracto checker i am able to see the data.I created the info packages one for Attr and other Txt,replicated the datasource and loaded the data.I am able to see the data in the PSA and when i go into monitor in the infopackage it says the data has been loaded and it shows no errors.But I am not able to see this data in the master data info object.Can anyone please help me out???
Mouli

Hi
Check out your infopackage setting: if its upto PSA or to MD table also
Open Master data table in SE11 and check the OBJVERS field wether the MD is activated or not!
Regards
GSK

Not able to see specific tags for FSCM Credit Management on BP master data screen

Hi All,
I have already set up Collections & Dispute Management,
I am now on my way to start FSCM Credit Management setting up. I have already created the BP role (UKM000) and assigned it for direction customer to BP, but I am not able to see any specific tag on BP Master data related to Credit management, (just as I can see "Collections profile" tag, in reference to Coll. Mngmt).
So, I am not able to see these tags yet: "Credit profile", "Credit worthiness", "Cresit limit and control".....under Credit Management BP role!
What am I missing there? Have I got to activate BAdi UKM_R3_ACTIVATE in order to be able to "see" those BP tags???
....Or what else?
I will reward with points if someone can provide me any hint about this issue.
Thanks a lot.

Hi Pallavi,
Many thanks for your quick response. However, I have not succeeded in seeing that tab.
Let me tell you, I may be confused by a document I downloaded from internet about the BP master data views (as for the FSCM Credit Management role, of course) . Please find below the commented tag. It is an imaged I copy to you from that document I told you, for you to see which tag I am talking about:
I don´t know the content of that tab...but I would like to see it in place....you know..
Now, I checked you last answer and I saw that everything was already set by factory, please find below:
BUS4 view:
BUS5 view:
However, I´m still not able to see the tab I told you at the beginning (first image). Am I confused about something here? Many thanks for your patience (these things happens when you set FSCM Credit Management for the first time).
Is that tag accesible?
Many thanks!
Wilson

T-code/Report for seeing the existing entire GL master data

Dear Experts,
Is there any t-code/Report for seeing the existing entire GL master data at chart of accounts level and company code level.
example :
GL a/c no    company_code   account_group   shrt_text    long_text     tax_category      open_item_management   etc
172500           1000                  Balance sheet   tds pay      tds payable    *                                 X
Thanks in Advance
Regards,
T.Kartheek
Moderator: Please, search before posting

Dear expert
    you can use f.10 or f.08
2. GL Account Balances (Totals & Balances )             S_ALR_87012301
3. GL Line Items                                                            S_ALR_87012282
4.Display of Changed Documents                                  S_ALR_87012293
5. Chart of Accounts                                                       S_AL:R_87012326
6.. GL Account List                                                      S_AL:R_87012328
7.. Display Changes to GL Accounts                             S_ALR_87012308
Regards
Ajeesh.s
Edited b

Master Data Loaded but not able to see.

Loaded master data successfully. Able to see it in P and M table, but not able to see when going thru Manage - Contents at InfoProvider level.
Many requests are available showing number of records Transferred and Updated.
What could be the possible reason?

Hi Sarabjit,
Welcome to SDN!!
You need to load the transaction data into the Info-provider to see the contents and not just the master data.
In case you have done the transaction load then you need to do the "apply hier/attr change" for the master data loaded. Goto RSA1 -> Tools(menu) -> apply hier/attr change -> Seelect your info-object and execute.
Bye
Dinesh

How to see request no in master data objects

Hi Experts,
In My scenario loading master data to Infoobject with delta update.
How to do the repeat delta? in case of delta failed.
Where to se the failed request.
i need it urgent ,please help me in this regard.
Thanks,
Bala

Hi
In the infopackage which loads the master data , there is a monitor option in the top. Choose this option and give a date range. You can see here the list of all requests failed/ success/still pending
From here, if certain requests failed for delta, you can go to PSA and right click on PSA and update immediately
Hope this helps
Regards
N Ganesh

Why cant I see an attribute when I "maintain master data"

Gurus -
Here is an easy question for you.
I added a new navigational attribute to an InfoOject. After I have loaded the data and activated it, I can't see the navigational attribute/values when I do a "maintain master data" when I display it via InfoObject. But, I can see the navigational attribute/values when I do a "maintain master data" when I display it via InfoSource. What do I have to do to see it when maintaining master data via the InfoObject option?
Thanks!

usually in maintain master data - it might be that the number of fields are too large and you are not able to see your field.... what you can do is to select a particular row with data and double click on it to see the data or go to options and user parameters and choose ALV grid display and it usually displays all the fields unless you are using a custom layout which does not have this characteristic included.
The easiest way to check out if the characteristic is available is to use the P table in SE16 and view the contents - this too if you do not have custom layout defined at the ALV grid level...

How to see where all the master data is being used

Hi Gurus:
How to see say master data XYZ is being used in ODS, IC...ETC
Thanks & Regards

hi MK K,
to check the characteristic value is used by which infoproviders, you may try
rsa1->infoobject->choose the characteristic->'master data maintenance', select the row for that characteristic value, and button 'delete' (trash icon) and 'save', you will get a message 'master data cannot be deleted'.
transaction slg1, object RSDMD, subobject MD_DEL, and execute, in next screen double click the top node, you will see the log, message text in below panel, e.g 'master data xyz(SID xxxxx) is used in /.../...'
xyz = characteristic value
/.../... = table name, can be dimension table of infocube, e.g /bic/d[infocubename]x, then you know which data target used the value.
hope this helps.

Can not find master data in the cube

ItemNo is an navigation attribute of 0Material. We are using 0material in a cube. When I display the cube data include ItemNo, I don't find the data I am looking for. For example:
In 0Material:
0Material      ItemNo    Description
AAA                001           Test
BBB                002           Test
In the cube I expect to see:
0Material             ItemNo            On Hand Qty
AAA                      001                      1000
BBB                      002                       2000
Instead I saw:
0Material             ItemNo            On Hand Qty
AAA                                                1000
BBB                                                2000
0Material got refreshed after cube data got loaded. Is that why I don't find the refreshed Master data?
Thank you!

Hi,
When you laod the cube, the Values for Master are automatically get created in the master data (If they are not present earlier and with "Data Update Type in the Data Tragets" setting in InfoPackage).
Now when you are loading your cube with 0Material and Item Number, the values for Item Number seems blank. Thats the reason why you are not able to see the Item Number in Cube though it is present in Master. Because now these are two different keys, one with Item Number value and other without Item Number value.
Regards,
Yogesh.

Error while deleting the Master data

Hi Friends,
i am getting the below error while deleting the data from a master data:-
The system is unable to delete all of the specified master data,because some of it is still in use. (See log:Object RSDMD, sub-object MD_DEL )
Do you want to delete the data records that are no longer in use?
Could you guide how should i proceed to delete the data.
Regards,
Hirdesh

Hi Hirdesh,
If you are using master data in someother data targets u cant delete master data.So first you have to delete the data in data targets where this particual master data object is used, then remove the data in master data object.
Regards
Prasad

Automatic PO creation from PR with no master data

Dear gurus,
Is it possible to run ME59- Auto PO creation from approved PR with no master data/source assigned/PIR? Assuming user create adhoc PR.
Is it possible to run this process successfully if i didn't meet on the criteria below? let say no.1 is not checked?
1.Material Master purchasing view, check automatic PO check box.
2. Vendor Master purchasing view, check automatic PO check box.
3. Maintain Source list for Vendor and Material (transaction ME01) and also see validity period.
4. Maintain Purchase Info Record (transaction ME11), check info record category (must be standard or pipeline or subcontracting)
5. Create a Purchase Requisition ( transaction ME51N), during creation select check box of Source Determination.
6. Use transaction ME59 and execute for purchase requisition for vendor, you will be able to create automatic PO.
Thanks in advance.

Hi,
yes all point should be checked
check following link
[http://www.sap-img.com/materials/steps-to-create-auto-po.htm]
Regards
Kailas Ugale

Steps to prepare and upload legacy master data excel files into SAP?

Hi abap experts,
We have brand new installed ECC system somehow configured but with no master or transaction data loaded .It is new empty system....We also have some legacy data in excel files...We want to start loading some data into the SAP sandbox step by step and to see how they work...test some transactions see if the loaded data are good etc initial tests.
Few questions here are raised:
-Can someone tell me what is the process of loading this data into SAP system?
-Should this excel file must me reworked prepared somehow(fields, columns etc) in order to be ready for upload to SAP??
-Users asked me how to prepared their legacy excel files so they can be ready in SAP format for upload.?Is this an abaper job or it is a functional guy job?
-Or should the excel files be converted to .txt files and then imported to SAP?Does it really make some difference if files are in excel or .txt format?
-Should the Abaper determine the structure of those excel file(to be ready for upload ) and if yes, what are the technical rules here ?
-What tools should be used for this initial data loads? CATT , Lsmw , batch input or something else?
-At which point we should test the data?I guess after the initial load?
-What tools are used in all steps before...
-If someone can provide me with step by step scenario or guide of loading some kind of initial master data - from .xls file alignment to the real upload - this will be great..
You can email me some upload guide or some excel/txt file examples and screenshots documents to excersize....
Your help is appreciated it.!
Jon

hi,
excel sheet uploading:
http://www.sap-img.com/abap/upload-direct-excel.htm
http://www.sap-img.com/abap/excel_upload_alternative-kcd-excel-ole-to-int-convert.htm
http://www.sapdevelopment.co.uk/file/file_upexcel.htm
http://www.sapdevelopment.co.uk/ms/mshome.htm

Couldnot see master data

Similar Messages

Maybe you are looking for