Count the number of values selected in a form

Hello
I need to count the number of values selected in a form.
Here is my form dump:
I want to count the values circled in red.
So the number I want in this case is 5.
Any suggestions?

Aegis,
Yeah, good point. Here is a minor tweak:
<cfset total = 0>
<cfloop collection="#FORM#" item="field">
     <cfif field NOT IS "fieldnames">
       <cfset total += ListLen( FORM[ field ] )>
     </cfif>
</cfloop>
<cfoutput>
     <p>Total: #total#</p>
</cfoutput>
-Carl V.

Similar Messages

Count the number of values selected in a Dashboard prompt

Hi,
I have a requirement to show the count of the number of values selected in a Dashboard prompt. How to do that?
Thanks in advance.

Hi,
Please follow below steps;
1. create a report(which will show the number of value selected)-
Pull the dimension column in criteria on which the prompt is created, make this column as IS PROMPTED. Edit the FX and put the expresion as; Count(*)2. In report pull narrative view add your custom text like "Number of prompt selected are @1". (@1 is nothing but he count of prompt selected.)
3. Put this report on the dashboard which has prompt.
Mark correct/helpful if it helps.
Regards,
Kashi
Edited by: K N Yadav on 28 May, 2013 2:01 AM

Counting the number of values selected in a list box

I'm trying to add a counter to a form that tells the user how many values have been selected from a list box... I tried adding a FormCalc formula to a calculate event in the "counter" field as follows:
count(form1.#subform[0].ListBox1.rawValue)
But for some reason it's not adding them up. It only gives me a value of 0 when none are selected, or 1 where any number of selections are made.
Can anyone help me out?
Thanks in advance

Try putting this in the calculate event of your counter field:
var num=0;
for (var a=0;a<ListBox1.items.nodes.length;a++){
if (ListBox1.getItemState(a))
num++;
this.rawValue=num;
Exit the list box and the field will calculate.
Kyle

Count the number of values in a two dimensional array

i am trying to figure out how to count the number of values in a two dimensional array.
numScores = student[i][j].length;This doesn't work, i am trying to find a way of counting the columns

Object[][] o;
int tot = 0;
for(int x = 0 ; x < o.length ; x++)
tot += o[x].length;
}If it's not a jagged array, however, this would be easier:
int tot = o.length * o[0].length;

How can I count the number of values in one column which answer to a condition in another column?

I'm using Numbers 3.2 and would like to count the names in a column which satisfy a condition in a different column. There are 3 "streams" through which these names have come to me, and I would like to easily identify how many have come from each stream. Any help?

Hi DirtyDawg,
COUNTIF is your friend here.
If your source is in column C and your streams are 1, 2 and 3:
=COUNTIF(C,"=stream1")
=COUNTIF(C,"=stream2")
=COUNTIF(C,"=stream3")
These need to be in a footer or header row or in a different column than C.
hope this helps,
quinn

Count the Number of Rows in Data form

Hi,
I want to count the number of rows in a data form.In my form there is a large number of rows.Is there any way to count it.
Thanks.

If you are on 11.1.2.x then you could look at adding a formula and using the CountA function - http://download.oracle.com/docs/cd/E17236_01/epm.1112/hp_admin/apcs03s06.html
Otherwise it would be possible using custom javascript which you would have to had some experience in using.
Cheers
John
http://john-goodwin.blogspot.com/

Count the number of days in the selected range using Customer exit

Hi Experts,
we have requirment where user is asking to add a column to report, which will have 'count of days for which key figure is having values' for each of the months and the Header would be 'Day Count'
Please let me know if its possible using Customer exit?

Hi,
In our report we have two characteristics site no. and product and we have 6 key figures of type quantity and Input for the report is Fiscal year/period
So in the report Key figures are populated with values for respective site no. and product combination
Now the user wants new column in report which will have header u2018Day countu2019 and it should Simply count the number of days in the selected range that have a volume different than 0 for key figure
Please let me know if more details are required

How do you get the count of number of checkbox selected?

hi,
plz tell me how do you get the count of number of checkbox selected?

Not sure what you are doing so I will attempt to answer your question. If have one question which can have multiple answers you have will recieve an array so you have to do getParameterValues("name") and move it into an array.
If you have multiple questions and only value will be selected do a getParameter("name") on each form element.
HTH, if not provide more detail.
J.Clancey

Count the number of records between two key values (BTREE)

How can I count the number of keys between two values?
I'm using python driver, and BTREE access method.
====>
ideally what I want is to average a whole time-series data set (the intervals can change) to a given number of points. The keys are the time stamps and the values are the data that needs to be averaged. I need to count the number of records between two time stamps so that I can divide that number by the number of points i need, and average the data. What is the best way to do this? Or should I just keep the intervals for the time stamp constant and use RECNO access method?
Thank you
(first post btw.. and why aren't there many people in stackoverflow who answer Berkeley DB questions?)

BDB is an embedded db and it does not have any internal counters or statistics that you could grap to use for this. You will need to do it manually.
You can create a cursor, grap the records you want, each time you get the next record you bump a counter.
If you are using RECNO, you can use a cursor to get the record number of the record (DB_GET_RECNO), and if all you data is in
sequentail records with no missing records you can figure out the total count by take last rec # - initial rec # + 1 to get a total count.
If you switch over to the SQL API, you can issue a SQL query to give you a count. Select count(*) Where .......
Since you have to grab the data anyway, then best may be to count records as you go along.
thanks
mike

How to Count the number of TAB chars value '0A' in a line?

I have a requirement to count the number of TABs in a text file that I am processing (they must equal 75) to ensure that all the fields have been submitted on the file I am reading?
How do I identify the TABs in a line?
I have this so far:
         CONCATENATE gv_unix_file gv_lstfiles-name INTO gv_unix_file.
          OPEN DATASET gv_unix_file for INPUT IN TEXT MODE ENCODING NON-UNICODE.
          IF sy-subrc <> 0 .
            message e000(zz) with 'Cannot access in_uk files'.
          ENDIF.
          CONCATENATE gv_unix_file_arc gv_lstfiles-name INTO gv_unix_file_arc.
          OPEN DATASET gv_unix_file_arc FOR OUTPUT IN TEXT MODE ENCODING NON-UNICODE.
          IF sy-subrc <> 0 .
            message e000(zz) with 'Cannot access in_uk files'.
          ENDIF.
          DO.
            READ DATASET gv_unix_file into lv_str.
            IF sy-subrc <> 0.
              exit. "exit do loop, file is done.
            else.
              TRANSFER lv_str to gv_unix_file_arc.
            ENDIF.
          ENDDO.

Here is a sample code:
DATA: lv_string TYPE string,
      lv_tab TYPE c VALUE cl_abap_char_utilities=>horizontal_tab,
      lv_i TYPE i.
DATA: result_tab TYPE match_result_tab.
DO 3 TIMES.
CONCATENATE 'A' lv_string INTO lv_string SEPARATED BY lv_tab.
ENDDO.
" this is how you need to find how many tabs are in your transfer work area...
FIND ALL OCCURRENCES OF lv_tab IN lv_string RESULTS result_tab.
DESCRIBE TABLE result_tab LINES lv_i.
WRITE:'No. of tabs found:', lv_i.

Count the number of rows resulting from a select statement

Hi,
Is there any way of counting the number of rows resulting from a select statement. i.e I have a select distinct statement and I then want to perform an IF statement on the number of rows resulting from the select statement.
Any help appreciated
Thanks
Gary

Declare
var1 number;
Begin
select count(distinct column_name) into
var1 from table_name;
If var1 > x Then
End IF;
End;
Hope I understood the problem correctly
null

Count the number of unique values in column

Hi
I have a large numbers file (thousands of rows) with data for different dates. I need to calculate the number of unique (distinct) dates are in the spreadsheet.
Does anyone know how to do this?
Thanks,
Bruce

bpj,
Let's say your date is in column B for this example and your first data row is Row 2. In another column you can enter into row 2: =IF(COUNTIF($B$2:B2, B)=1, 1, "") Summing the new column content will yield the number if unique dates.
As badunit observes, this will result in sluggish document. If the number of possible dates is small compared to the number of rows of data, it would be better to make a table of possible dates and count the number of occurrences of each of those dates in the data, a COUNTIF function on the frequency data for the date range will give you the number of unique dates, possible much more efficiently.
Jerry

Report model - number of values selected in DDL param

Good afternoon,
I have created a report model that references Teradata views, and I am using this model to populate several datasets in a Report Builder report. One dataset returns actual results, and the other datasets are used to populate available values for multivalued
parameters.
The issue I'm encountering is that some of my parameters return a large number (tens or hundreds of thousands) of selectable values. When clicking "select all", I'm getting an error, since the concatenated list of values exceeds
the length limit. However, since I'm working with a report model, I cannot use T-SQL workarounds such as custom "<ALL>" values/handling. I also need to limit my result set using these values as parameters, not filters, since I want
the intensive processing handled in the DB server, not the app server.
Is there any possible way to accommodate this? As an example, I have a large (200k+) list of products, belonging to about 7,000 brands. I want both my product number and brand lists as multivalue parameters...I might want to run
the report for all products and all brands (returning 200k+ rows), or choose "select all" in the products list, but only pick a few brands (or vice versa). Cascading parameters (with the first parameter limiting the next set of values)
is not an option since there are many of these parameters that have too many values for the allowed limit (i.e. even my brand list generated the error when I choose "select all" and only picked a few products).
I have searched literally dozens of forums and tech sites, all to no avail thus far. Any assistance will be greatly appreciated...thank you!
-Chris

I have a SSRS Report with 4 multi-select parameters.
The customer has requested that they would like the drill-through to open in a new window.
I am using Java Script for that purpose.
However, there is a limit on how long a URL may be.
Is there a way in a SSRS report to limit the number of values in a multi-select parameter selected?
Thanks.
One workaround is to add a internal parameter which will count the number of selected values and will allow the navigation only if the count falls below the threshold.
For this you can use an expression like below for setting the internal parameter
Len(Join(Parameters!MultiValuedParameter.Value,","))-Replace(Join(Parameters!MultiValuedParameter.Value,","),",","")
Then use expression like below for the jump to url/report property
IIf(Val(Parameters!HiddenParameter.Value)<=<your thresholdvalue>,<report url>,Nothing)
You can also add a notification textbox on top which will show a message like "Report navigation not possible due to too many values selected" and keep it hidden by default. Then based on above parameter value you can make it visible
ie make hidden property like below
IIf(Val(Parameters!HiddenParameter.Value)<=<your thresholdvalue>,False,True)
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Programatically count the number of files in a folder

Hi Folks
I need to programatically count the number of files in a given folder and return the value to a Program Unit to be included in further processing.
Can anyone point me in the right direction. I have looked at UTL_FILE but this does not offer what I want.
Does anyone know of an obscure package in Oracle that I could use?
I'm using 9i in a W2K environment.
Many thanks
Simon Gadd

Hi,
following a java based solution i found somewhere on Tom Kyte's AskTom forum.
GRANT JAVAUSERPRIV to TESTUSER;
dbms_java.grant_permission( 'TESTUSER', 'SYS:java.io.FilePermission', 'c:\', 'read' );
create global temporary table DIR_LIST
( filename varchar2(255) )
on commit delete rows
create or replace and compile java source named "DirList"
as
import java.io.*;
import java.sql.*;
public class DirList
    public static void getList(String directory)
                       throws SQLException
      File path = new File( directory );
      String[] list = path.list();
      String element;
      for(int i = 0; i < list.length; i++)
          element = list;
#sql { INSERT INTO DIR_LIST (FILENAME)
VALUES (:element) };
create or replace procedure get_dir_list( p_directory in varchar2 )
as language java
name 'DirList.getList( java.lang.String )';
exec get_dir_list( 'c:\temp' );
select count(*) from dir_list;

How to count the number of lines dynamically,

In the below code am trying to read the lines which are selected using a check box, also am categorizing the contents depending on the follow up material.
after displaying one category contents am displaying a line
which also counts to a line in the internal table.
My question is how to count the number of lines(ULINE) displayed dynamically.
FORM GET_LINES .
DATA: LV_LINES TYPE I,
        LV_TIMES TYPE I,
        LV_TABIX TYPE SY-TABIX.
DESCRIBE TABLE IT_REC LINES LV_LINES.
DO LV_LINES TIMES.
    LV_TIMES = SY-INDEX .
    READ LINE LV_TIMES FIELD VALUE IT_REC-CHECK INTO GV_CHECK.
    IF SY-SUBRC EQ 0 AND GV_CHECK IS NOT INITIAL.
      LV_TABIX = LV_TIMES.
      READ TABLE IT_REC INDEX LV_TABIX INTO GWA_UPDATE.
      IF SY-SUBRC EQ 0.
        APPEND GWA_UPDATE TO GT_UPDATE.
      ENDIF.
    ENDIF.
ENDDO.
ENDFORM.                    " GET_LINES

In the below code am trying to read the lines which are selected using a check box, also am categorizing the contents depending on the follow up material.
after displaying one category contents am displaying a line
which also counts to a line in the internal table.
My question is how to count the number of lines(ULINE) displayed dynamically.
FORM GET_LINES .
DATA: LV_LINES TYPE I,
        LV_TIMES TYPE I,
        LV_TABIX TYPE SY-TABIX.
DESCRIBE TABLE IT_REC LINES LV_LINES.
DO LV_LINES TIMES.
    LV_TIMES = SY-INDEX .
    READ LINE LV_TIMES FIELD VALUE IT_REC-CHECK INTO GV_CHECK.
    IF SY-SUBRC EQ 0 AND GV_CHECK IS NOT INITIAL.
      LV_TABIX = LV_TIMES.
      READ TABLE IT_REC INDEX LV_TABIX INTO GWA_UPDATE.
      IF SY-SUBRC EQ 0.
        APPEND GWA_UPDATE TO GT_UPDATE.
      ENDIF.
    ENDIF.
ENDDO.
ENDFORM.                    " GET_LINES
The display function is:
FORM DISPLAY_DATA .
ULINE.
WRITE : /1 SY-VLINE, 'check',
            10 SY-VLINE, 'Plant',
           20 SY-VLINE, 'Material number',
           50 SY-VLINE, 'Follow up material',
           70 SY-VLINE, 'Safety stock',
          100 SY-VLINE, 'Partc'.
ULINE.
LOOP AT IT_MARC.
    MOVE: IT_MARC-WERKS TO IT_REC-WERKS,
          IT_MARC-MATNR TO IT_REC-MATNR,
          IT_MARC-NFMAT TO IT_REC-NFMAT,
          IT_MARC-EISBE TO IT_REC-EISBE,
          IT_MARC-PARTC TO IT_REC-PARTC .
    APPEND IT_REC.
    CLEAR IT_MARC.
ENDLOOP.
DATA: GV_TABIX TYPE SY-TABIX.
LOOP AT IT_REC.
    GV_TABIX = SY-TABIX.
    READ TABLE GT_TOTAL WITH KEY WERKS = IT_REC-WERKS
                                 NFMAT = IT_REC-NFMAT.
    IF SY-SUBRC EQ 0.
      IT_REC-PARTC = GT_TOTAL-PARTC.
      MODIFY IT_REC INDEX GV_TABIX TRANSPORTING PARTC.
    ENDIF.
ENDLOOP.
LOOP AT IT_REC.
    WRITE : /1 SY-VLINE, IT_REC-CHECK AS CHECKBOX,
            10 SY-VLINE, IT_REC-WERKS,
            20 SY-VLINE, IT_REC-MATNR,
            50 SY-VLINE, IT_REC-NFMAT,
            70 SY-VLINE, IT_REC-EISBE,
           100 SY-VLINE, IT_REC-PARTC.
    AT END OF NFMAT.
      ULINE.
    ENDAT.
ENDLOOP.
ULINE.
ENDFORM.                    " DISPLAY_DATA
Solved

Count the number of values selected in a form

Similar Messages

Maybe you are looking for