Course won't load in LMS

We have a number of courses we created in Captivate 5.5 before we were able to upgrade to 6.  It seems like most of these courses have had some sort of issue with loading and/or resuming.  They'll start to load the player and just hang on "Loading". I've read somewhere that resume data in 5.5 didn't always play nice with the LMS, so we were hoping to republish these courses in 6.
My question is this: Will republishing a 5.5 file through 6 properly fix/update the resume data, or are we basically out of luck with those courses?
Our full situation is a little more complicated, but a clear answer to this would help us fit a piece to the puzzle and eliminate a variable.  We republished a 5.5 to 6, replaced it, and it still seems to hang on the load screen. But the odd thing is, it works perfectly fine from other networks.  We aren't experiencing any filter/firewall issues between our servers and the LMS, so I can't figure out what's making the Captivate courses in particular hang on just OUR network.
UGH.

Captivate 6 introduced totally new SCORM drivers from the same company that makes the SCORM Cloud online LMS, which is reportedly the most SCORM-compliant LMS on the planet.
Since these SCORM drivers have been introduced we've been seeing far fewer LMS integration issues reported in this Adobe Captivate Forum.  So I would definitely recommend that you upgrade Captivate, but I would suggest you do the upgrade to Cp7 now rather than Cp6 and that you go for the Subscription plan so that from now on all your licenses will be using the very latest software.  Trying to get good integration with LMSs is a moving target.
Another thing I would suggest is that you make sure there is no caching of Captivate course content being done on your network.  It is possible that your issue could be related to older copies of the courses still being served up by Proxy servers.  One way to test is to publish the same course with a totally different name and see if it suffers the same problem.

Similar Messages

  • Course slow to load on LMS

    Published a course to our LMS made up of 6 fairly large (lots
    of video) Captivate projects. The modules are slow to load when
    learners are viewing them. Is there a setting in Captivate when
    publishing that will allow the course to start once a certain
    portion of the files have been downloaded?
    Thanks for your help!

    If you have a copy of Flash, you can create a custom
    preloader that determines exactly when the movie starts playing.
    Essentially, you just need to change a number that determines
    how much of the movie must load. However, you mentioned that you
    use a lot of video and I don't know whether the preloader takes any
    of the video files into account before starting the movie.
    If you're still interested, here a post that gives the basic
    details (you can also search the forums for 'preloader' and
    probably find more detailed instructions):
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=67&catid=464& amp;amp;threadid=1292323
    EDIT: Forums are broken, so you'll need to change
    & to just & in the link above to get it to
    work

  • Can't log in - desktop won't load

    Hi, and thanks for reading this. I hope someone here can help me.
    I have a G4 flat-panel iMac, running 10.2.8. Bought brand new in 2002 and have had no problems, with the exception of the hard drive going out a few months later and replaced under warranty. (Apparently a few of the dual-boot machines had this problem.) They also upgraded the OS to 10.2.8 and the computer has run beautifully ever since. Until the other night.
    I was online and the modem disconnected but Internet Connect kept displaying "Disconnecting". This happens on occasion and the only way out of it is to shut down the computer and restart. So I did, and when the computer restarted I could not log in. The computer started as usual and seemed fine, the log-in screen appeared, I entered my password, the computer said "logging in", a blue screen appeared briefly... and then kicked back to the login screen. The desktop never appeared.
    After several tries of that, I decided to reset my password (with the system CD). It let me reset my password and the computer recognized the fact I had changed my password. (You know how the log-in screen "shakes" to signal a wrong password - that never happened.) I tried to log in again and it said "logging in"... and returned to the log-in screen. The same thing happened when I tried the root user account.
    I was able to start up from my Norton CD and changed the startup disk to 9.2. In 9.2, I can see the contents of my hard drive including my User folder in OS X and everything that had been on my desktop in OS X is right there in the "desktop" folder for my user name. I can move, copy, and delete things there. It's all there; the desktop just won't load when I start in OS X.
    I don't know if it helps, but in 9.2, the computer recognizes my ZIP drive, CDs, and my Wacom tablet and mouse.
    I have gone through the discussion boards and articles here and cannot find where anyone else has had the exact same problem. I have tried the possible solutions below, and none of them have changed anything:
    * Norton Utilities (Disk Doctor) - fixed some minor errors, then ran it again and no problems were found.
    * Safe Boot - I couldn't get the mouse to work, and when I figured out the keyboard "shortcuts" to log in, I got the same thing as before... "logging in" and then getting kicked back to the log-in screen.
    * Disk Utility (from the Mac OS X install CD) - it fixed a couple things then said that my hard drive appeared to be okay.
    * fsck (single-user mode) - it said that "Macintosh HD appears to be OK". So at least the hardware seems okay.
    * Rebuilding desktop - a long shot but I figured it was worth a try; nothing changed.
    * Reset privileges (single-user mode) - as far as I can see, nothing changed even after doing this.
    * Startup items (folder) - nothing seems out of place.
    * Disable log-in items - I still couldn't log in
    * In single-user mode: when trying one of the suggestions from an article here, I typed "cd/Users/{my user name}/Library, then mv Preferences Preferences_old, and received a message stating "no such file or directory."
    Looking through the contents of my hard drive, I can see that there is a Desktop icon for OS 9, but not anything for OS X. In theory, shouldn't there also be a desktop icon for OS X? Has my computer somehow lost its "connection" or "map" to my OS X desktop? I ran fsck again today so that I could look at logs/parse failed/plist/etc (an article I found here on apple.com) and following those steps, I noticed there was a line that said "root device is mounted read-only." So I can only assume that has to do with the fact my OS X desktop doesn't load.
    So, with all that being said (it's a lot, I know, and I hope it all makes sense) ... Is this problem something simple that I can fix myself, or do I need to take it into the shop and have a technician look at it? As you can imagine, this is all getting very frustrating, with limited access to an old version of Photoshop, SimpleText, and a very old web browser that only works on a few sites (and thankfully Apple.com is one of them). I miss my OS X.
    Thanks again for reading this, and for any advice/assistance you may be able to provide.

    Thanks, Anna. Excellent work. Everything seems fine, except, of course, the booting OS X part.
    First try Resetting the PRAM
    • Shut down the computer.
    • Locate the following keys: Command, Option, P, and R. You will need to hold these keys down simultaneously later.
    • Turn on the computer.
    • Press and hold the Command + Option + P + R keys immediately after the startup chime.
    • Hold keys down until you hear the startup chime for the third time.
    • Release the keys and immediately and allow computer to boot.
    The fact that you can boot in Safe Mode suggests that you may have a Login item that conflicts with the startup process. If resetting PRAM does not work try this:
    Boot computer in Safe Mode.
    If you are able to get into the Login items (Apple Menu > System Preferences > Accounts > Login Items) make a note of all the log in items (write it down). Then delete them all by selecting each one in turn and clicking the minus sign under the list. Shut down and try booting the computer normally. If you are able to boot successfully add the Login items on your list one by one and try rebooting each time you have added one. This should help you isolate the offending item.
    I hope one of these methods works. Post back and let me know.
    cornelius

  • Windows 7 won't load properly / possible HDD failure?

    Well I will start off by saying I've been having problems with this since I've bought it.  It used to be under warranty and I had to ship it back twice, and I've had to do countless system recoveries but this time I'm at a loss.  My current problem started about 4 days ago.  I had skype downloaded, and my skype started freezing randomly, but only for 30 seconds to a minute, and then come right back to working.  Then this started happening more frequently, and then it got to the point to where it wasn't just skype that would freeze, it was my computer.  It must have only been explorer.exe that was freezing or something because my mouse still moved, and if I was in a skype call the skype call would work but I couldnt type or click on skype without it saying that it wasn't responding.  Then yesterday that problem upgraded again to nothing working very well.  My computer (again I can only assume it was explorer or something) would start up normally, and then once I got to my desktop the load light would come on my tower and freeze / slow down anything and everything.  Example was I had VLC media player open watching a show and the video would freeze for 2 to 5 minutes, play for 10 seconds, then freeze again.  Beforehand it was only slight lock ups, but then it became full blown lockups.  Once that load light came on it stayed on and never wavered and I would be forced to restart my computer to even give it a chance to run properly for a few minutes before this same problem would occur.  Yesterday however the problem upgraded once again, and my computer wouldn't even let me get to my desktop normally.  I was able to load into safemode with networking to try some solutions but nothing worked.  Then the hangup issue started occuring in safe mode as well, forcing me to restart again.  This is where it just keeps getting worse sadly.  My computer would get to the "Starting Windows" screen, sit there for a couple minutes, then maybe 1 out of 10 attempts it would get to the "Welcome" screen as if it was trying to load my desktop but never would load it, and on the other 9 attempts I didn't make it to the "Welcome" screen it just sat a black screen with the load light going and it would never do anything.  My mouse has never been frozen at any point so it's not a full on freeze situation, but something isn't right.  I did a sytem recovery last night, put it back once again to factory settings and it still locked up a little but nothing compared to how it had been.  I turned my pc off and went to sleep, and then this morning it did the usual not getting past the "starting windows" screen.  Sometimes it wouldn't even recognize my hard drive, giving me the old "insert media and boot from disc" or "No media found", I also got two errors, PXE-E61: Media test failure, check cable, and the other message was PXE-MOF: Exiting PXE ROM.   Then after receiving those messages my computer would restart and give me the choice to hit a button to load from disk.  Throught the course of this problem I tried startup repairs, smart tests, anti viruses, nothing did anything to help.  So I decided once again it was going to be time for a system recovery, but now when I hit f11 to go into the system recovery options, all of it is blacked out.  I can't even click on system recovery anymore.  So at this point Windows 7 won't load at all, not even in safe mode, and I'm lucky to even be given the OPTION to start it in safe mode.  Half of the time it seems my computer doesnt even recognize my harddrive, and I can't even do a system recovery or repair tools, but the repair tools didn't really do anything anyway.  So I have no way to use that computer, and Im thinking it might be HDD failure but I'm not hearing any noises coming from it and my computer has always been a little slow so it's not like things have slowed down by a lot so I'm not so sure its my HDD but I have no idea what to do or where to start since I've exhausted all my of resources on trying to fix this issue myself.  I know this problem is probably way too vague to try to get an accurate idea of what is wrong, but I will check back now and then and answer any questions to the best of my ability (I'm not tech savy so if you need really fancy PC information you wil most likely need to tell me how to acquire said information).  I mean I guess if I have to I will get a new HDD, but that means I will most likely need to get a new OS, and I love windows 7 with all my heart and I don't want to upgrade at windows 8.  I feel like it's my OS but it could very well be anything at this point.

    Hi @rhhox ,
    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
    If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
    Regards,
    George
    I work for HP

  • I've swapped to i5c so my hubby has my i4s with pay as u go but now it won't load or sent e-mails! I've tried tech support suggested by Talkmobile for 'fix' but it hasn't solved problem,any ideas?..

    I've swapped to i5c (great phone) so my hubby has my i4s with pay as u go but now it won't load or sent e-mails! I've tried tech support suggested by Talkmobile for 'fix' but it hasn't solved problem,any ideas?..

    Try this from MacFixIt as well:
    In the case of drive directory damage or problems with permissions, the solution is usually to use Apple's Disk Utility to repair the disk. Of course, you won't be able to perform this operation normally (simply launching the Disk Utility application, located in Applications/Utilities, and initiating a disk repair) if your system will not startup. So two options exist:
    * Insert your Mac OS X 10.4.x (Tiger) media (DVD or CD) and restart the computer while holding down the "C" key. Once the computer has booted from the installation disc, select "Utilities" from the menubar and open Disk Utility. Repair the disk, then quit Disk Utility and restart your system.
    * Alternatively, you can repair the disk while booted in single user mode if you do not have access to a retail Mac OS X 10.4.x (Tiger) DVD/CD. To startup in single user mode, hold down the "Command" and "S" keys simultaneously at startup. Once properly booted, type the command fsck at the prompt. Repeat these process until no errors appear.

  • Slow loading in LMS - CP5.5

    All our courseware is designed the same way - a Title slide with an opening Zoom transition, audio, and two click boxes indicating where to go next.
    Some courses behave normally in the LMS. In others, the opening screen zooms in, a loading button appears, then the screen zooms in again.  There is no appreciable difference in the size of the files - they're all 2 - 5 MB. 
    I've tried setting the preloader in CP 5.5 at 50% instead of 100% - no difference.  And I've tried a test with duplicating the first slide and giving it just the zoom, with the audio and click boxes on the second slide.  No difference.  The LMS itself doesn't seem to have any settings to preload in stages.
    I've asked the LMS tech support for advice, but I wondered if anyone here had seen and solved this situation.
    Thanks for any help...

    You're probably experiencing server latency as your LMS bogs down under the onslaught of too many interactions being thrown at it by users of the Captivate content.
    Change your Captivate SCORM HTM template over to the one that only sends scoring data at the end of the project.  That will greatly reduce the load on your LMS.

  • Imovie won't load my itunes music and photos from iphoto.

    Imovie won't load my itunes music and photos from iphoto. This also does not work on my garageband for itunes music. I have tried backing my itunes media and rebuilding but it has not helped. Anyone with a solution?

    Note that you have to actually run the update - where you get the window where you have the choices to "Update" or "Restore" your iPod (you'll of course want to "Update"). It sounds to me like you downloaded the updater but did not actually run it to update your iPod.
    Hope this helps.
    PowerMac G5 DP 2GHz   Mac OS X (10.4.3)  

  • P6N SLI Platinum Won't Load Vista or XP

    I trying to load an OS on a new build, but have run into an issue. The build went well, but the OS won't load.
    While trying to load Vista (32bit) it says "Loading Operating System" and the progress bar goes all the way to the end but then never gets any further. It just sits there.
    So, not being familiar with Vistas load I thought I would tried XP Home SP2. With this I am at least able to partition the drives and choose quick format but once it gets to 20% this too freezes.
    So far I have gone into BIOS and chosen to load both safe defaults and optimized defaults, which makes no difference. I have also tried removing one or the other of the memory sticks, again no help.
    Here is the system particulars.....
    MSI P6N SLI Platinum LGA 775 NVIDIA nForce 650i SLI ATX MB
    Intel Core 2 Duo E6600 2.4GHz 775 Processor
    Antec Truepower Trio 650w PSU
    G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)
    1 - Western Digital Caviar 200GB 7200 RPM SATA 3.0Gb/s Hard Drive
    1 - Western Digital Caviar 250GB 7200 RPM SATA 3.0Gb/s Hard Drive
    1 - GIGABYTE GeForce 7300GT 256MB GDDR2 PCI Express x16 Video card
    1 - DVD drive
    1 - Sony Floppy
    Everything is brand new. Any help would be greatly appreciated 

    Quote
    Regarding Dual Channel Mode:
    Am I reading the manual wrong? In the illustration it shows 4 DIMMS, the closest to the CPU being DIMM1, followed by DIMM3 (which are yellow), then DIMM2 and lastly DIMM4 (which are orange), and it states that in order to take advantage of dual channel to place the memory in DIMMS 1 & 2 and/or DIMMS 3 & 4
    Sorry.  I did not realize MSI relabeled the DIMMs. You are right of course.
    [CPU] - DIMM1 - DIMM23 - DIMM32 - DIMM4
    [CPU] - SLOT1 - SLOT2 - SLOT3 - SLOT4

  • Session won't load - ERROR MESSAGE- Please help decipher

    For no apparent reason, when I opened my session I got an Adobe ERROR MESSAGE. Then the session won't load and Audition crashes.
    Here is the message:
    (A big Red X appears in the dialog window)
    Audition has encountered an error.
    [\Monk\main\common\PremiereShell\Src\PlayerFactory.cpp-379]
    Can anyone think of a way I can fix this situation and recover my session? Do you think a reinstall of Audition might help? Other sessions open fine. This session was particularly important because I had been working on it for weeks and this was the final finished version. It had been like pulling teeth to get this one done, then when I finally did get it done...this happened. So yuck!! Fortunately I had done a mixdown before the crash, small blessing. But I need the session, of course.
    Thanks for any ideas at all.

    ozworldz wrote:
    Very good.
    right...because the xml is basically a delimited text file. This kind of file would probably rarely ever get corrupted.
    ROFLMAO! Who told you that?
    It'a a FILE, for heavens' sake. And to any computer, all files are essentially the same thing - a string of bytes. What makes a file vulnerable or less vulnerable is how it's handled by whatever program is using it, or to a lesser extent the storage mechanism. And when it comes to .xml files and Adobe, they don't have a particularly good track record with some of them - notably the ones they use for system settings and presets.
    But I have to say that since Adobe thoughtfully gave us the option to save session data as .xml files, I haven't bothered to save them as anything else - simply because as Suite Spot says, you stand some sort of microscopic chance of being able to rescue the data when all else fails. I am fortunate - most of the stuff I do in MV doesn't use a load of tracks and absolutely no effects (live acoustic music editing), but even though the files aren't that complex, I still back them up regularly during processing because, as they regularly get rewritten and updated, they most certainly are vulnerable.

  • Firefox won't load any pages on SmartQ T10 but will find addons and sync. Why?

    Pretty much as the title says, it installed fine, displays the startup page but won't load anything remotely except add-ons and sync data. Every other browser and inet app works fine on the device, including opera and the defaul browser, gmail etc, only Firefox doesn't work.

    Not a reply but an update to my first posting. The problem fixed itself after about a month or so. Everything just returned to normal and Firefox worked again. Unfortunately the story continues. After a couple weeks of working the symptoms reoccurred and I was again without the use of Firefox. Pause - - - - but the story continues. I got fed up as I was writing this very update and I tried again for the countless time to find a solution. And the good news is I did and Firefox is again working. It turns out that I had always checked the MS Windows firewall which reflected that Firefox had access to the web. I never thought to check my antivirus program suite. It of course also has a firewall through which Firefox was for some reason not allowed. Once I gave Firefox access the problem was solved. I don't know why I had never thought of this. I am embarrassed to admit it but I hope this may help others.

  • Iphone 4 won't load past logo screen

    While on vacation, my phone went black. I thought the phone had gotten too hot, so when I got back to our room, I plugged it into the charger and after a few minutes it said "activation required", then brought me to the "connect to itunes" screen. Of course, on vacation, I didn't bring my computer! So after a week gone without my phone, I am connecting it to itunes and it won't load past the silver apple logo screen and itunes won't recognize it!! Help!! Is my phone trash or can it be saved???

    My solution: I opened the phone, removed the battery, cleaned out the battery connector and reattached the battery. The phone turned back on and showed the low battery sign.  I had done this before and it didn't work. Apparently the problem was I hadn't properly connected them. You need to make sure it's locked on tight so when you close your phone slides on easily.

  • AI file that has loaded many times previously into FC, now won't load

    I am starting to lose my mind working with Flash Catalyst.   I have created a file within AI CS5, imported into FC CS5 numerous times, now all of a sudden it won't load.  The error message "Error initializing import libraries" appears.   I had this issue happen before, but after much frustration, I went back and re-created the AI file under the Flash Catalyst New Document profile and that seemed to solve the problem, now, even with an AI file created with the FC document profile, a document that has loaded into FC MANY times successfully, all of a sudden won't load.   Of course I am at the end of the project and was ready to export the final SWF files and it does this.  I am about ready to throw my computer out the window at this point.  
    It is not a large file, under 1MB in fact, so that is not the issue.   Is there some kind of FC cache somewhere on my computer that I need to clear out?   I have scoured the internet looking for a solution as I have a deadline of Wednesday of this week for this project and I can't find anything helpful.  This is beyong frustrating and seems to make no sense as the AI file has imported successfully in it's current state many times. 
    I tried to rebuild the project, move its file location, rename it, cut and paste it into FC and nothing seems to work.  In fact, I can't cut and paste a simple object at this point without getting the "Error initializing import libraries" error message.   PLEASE HELP ME ADOBE!   I AM DYING HERE!!!   Thanks!!!!!!!!!!! 

    I found the FC log files and the log for my last attempt at importing my AI file is below.  Do I have a Java issue?   This is WAY above my pay grade, but I'm hoping maybe it's a simple fix?  Run Java update? 
    !SESSION 2011-11-08 09:01:17.129 -----------------------------------------------
    eclipse.buildId=unknown
    java.version=1.6.0_16
    java.vendor=Sun Microsystems Inc.
    BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
    Command-line arguments:  -os win32 -ws win32 -arch x86 -clean
    !ENTRY com.adobe.thermo.core 1 0 2011-11-08 09:01:28.111
    !MESSAGE Loading ThermoPanels from bundleentry://51/ThermoPanelsSWF/ThermoPanels.swf
    !ENTRY org.eclipse.equinox.p2.ui.sdk 2 0 2011-11-08 09:01:34.225
    !MESSAGE Could not locate the running profile instance
    !ENTRY com.adobe.flexbuilder.project 4 43 2011-11-08 09:02:09.931
    !MESSAGE Error during import: Error initializing import libraries
    !STACK 0
    java.lang.Exception
        at com.adobe.flexbuilder.project.internal.FlexProjectCore.createErrorStatus(FlexProjectCore. java:972)
        at com.adobe.flexbuilder.util.logging.GlobalLogImpl.log(GlobalLogImpl.java:66)
        at com.adobe.flexbuilder.util.logging.GlobalLog.log(GlobalLog.java:50)
        at com.adobe.thermo.importnativeartwork.importer.ImportManager.showErrorDialog(ImportManager .java:1982)
        at com.adobe.thermo.importnativeartwork.importer.ImportManager.importArtworkIntoNewFile(Impo rtManager.java:404)
        at com.adobe.thermo.importnativeartwork.importer.ImportManager.importArtworkWithProgress(Imp ortManager.java:305)
        at com.adobe.thermo.welcome.ProjectCommands.importArtworkWithProgress(ProjectCommands.java:4 19)
        at com.adobe.thermo.welcome.ProjectCommands.access$0(ProjectCommands.java:405)
        at com.adobe.thermo.welcome.ProjectCommands$1.run(ProjectCommands.java:368)
        at com.adobe.thermo.interfaces.FlexDialogManagerInterface$RunnableWrapper.run(FlexDialogMana gerInterface.java:77)
        at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
        at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:133)
        at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3800)
        at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3425)
        at com.adobe.thermo.interfaces.FlexDialogManagerInterface.doRunnable(FlexDialogManagerInterf ace.java:182)
        at com.adobe.thermo.importnativeartwork.ui.ImportProgressDialog.runImportNewProject(ImportPr ogressDialog.java:353)
        at com.adobe.thermo.welcome.ProjectCommands.doImportArtwork(ProjectCommands.java:361)
        at com.adobe.thermo.welcome.ProjectCommands.doImportArtwork(ProjectCommands.java:320)
        at com.adobe.thermo.welcome.ProjectCommands.createProjectFromArtwork(ProjectCommands.java:30 2)
        at com.adobe.thermo.welcome.ProjectCommands.createProjectFromArtworkRemote(ProjectCommands.j ava:313)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
        at java.lang.reflect.Method.invoke(Unknown Source)
        at com.adobe.thermo.core.remoteobject.IncomingCommandHandler.invoke(IncomingCommandHandler.j ava:152)
        at com.adobe.thermo.core.remoteobject.IncomingCommandHandler.access$0(IncomingCommandHandler .java:139)
        at com.adobe.thermo.core.remoteobject.IncomingCommandHandler$1.run(IncomingCommandHandler.ja va:124)
        at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
        at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:133)
        at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3800)
        at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3425)
        at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2382)
        at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2346)
        at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2198)
        at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:493)
        at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:288)
        at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:488)
        at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
        at com.adobe.thermo.application.ThermoApplication.start(ThermoApplication.java:133)
        at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
        at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
        at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
        at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:382)
        at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
        at java.lang.reflect.Method.invoke(Unknown Source)
        at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
        at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
        at org.eclipse.equinox.launcher.Main.run(Main.java:1236)

  • Dreamweaver 8 Trial won't load

    I'm hoping someone can help me. I am considering trying my
    hand at web design, so I downloaded the trial version of DW8 this
    morning to see if it might be good software to use. It has worked
    alright all day, but now when I try to go into it, it won't load. I
    click on the icon, select the trial version option, and I see the
    DW8 load screen and the DW icon appear briefly in the toolbar, but
    that's it. Nothing happens. Of course I've rebooted the computer
    but that hasn't helped. Can anyone tell me what the problem might
    be? Thanks.

    See if this helps:
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=fb181c10
    Nadia
    Adobe® Community Expert : Dreamweaver
    CSS Templates |Tutorials |SEO Articles
    http://www.DreamweaverResources.com
    ~ Customisation Service Available ~
    http://www.csstemplates.com.au
    > I'm hoping someone can help me. I am considering trying
    my hand at web
    > design,
    > so I downloaded the trial version of DW8 this morning to
    see if it might
    > be
    > good software to use. It has worked alright all day, but
    now when I try
    > to go
    > into it, it won't load. I click on the icon, select the
    trial version
    > option,
    > and I see the DW8 load screen and the DW icon appear
    briefly in the
    > toolbar,
    > but that's it. Nothing happens. Of course I've rebooted
    the computer but
    > that
    > hasn't helped. Can anyone tell me what the problem might
    be? Thanks.
    >

  • How do you remove an app mistakenly uploaded if it was meant for iphone only and won't load on iPod Touch?

    I uploaded an iPhone app to my iPod Touch by mistake, and of course it won't load, but it keeps trying. I can't remove it when I sync to the computer because no "x" appears on the darkened app. Is there another way to remove the app?
    Thanks for your help.

    Pianoperson,
    Try removing the App from iTunes and resyncing your iPod.  If that works, you can go ahead and redownload the application. Just make sure to not to sync it to your iPod touch.
    B-rock

  • P45 Diamond won't load Vista or anything!!!!!

    Hi,
    After spending about 300 bucks on this board and several hundred dollars in diagnostics, and 2 weeks myself trying to get my system to just run... I am at the end of my tether.
    Vista Ultimate x 64 (bought the disk) won't load, and BSOD after the pretty circle logo.
    I updated the bios to present one. The crashes don't even get to the ATI crashes (ATI.DKG errors)
    I've tried all the tricks like 1 stick of ram, video card only in 2nd PCIE slot, millions of memtests (all passed)
    I would post the errors, cept I can't open windows :(
    My setup is P45 Diamond Motherboard
    2 Seagate 1TB hard disks
    8 GB of DDR3 ram (2 sets) (Corsair xms3-1333MHz 1.7V CM3X2048-133c9dhx)
    2 visiontek ati 4850 video cards
    Intel Q9550 processor
    Power supply is 1000W Silverstone Strider Series
    I did my homework and made sure the ram, videocards and processor were compatible. Don't know why it doesn't work, nor anyone else.
    Is this board garbage or what?
    Any suggestions would be greatly appreciated.

    I h
    - reduce memory clock speed to 1066 MHz by manually choosing the corresponding FSB/DRAM Ratio
    - raise Memory Voltage to ~1.58V
    - Disable Spread Spectrum
    - Disable EIST
    - Disable C1E Support (CPU Features)
    - Disable everything that you do not need for installing an operating system, that is:
    --> USB Controller (use PS/2 Keyboard) (tried both ps2/ and usb)
    --> USB Device Legacy Support (disabled)
    --> Onboard LAN Controller (disabled)
    --> Onboard 2nd LAN Controller(disabled)
    --> LAN Option ROM (disabled)
    --> Onboard IEEE1394 Controller (disabled)
    --> Onboard E-SATA Controller (disabled)
    --> Extra RAID/IDE Controller (disabled)
    --> COM Port 1 (disabled)
    --> (Green Power [Energy Save, CPU Phase Control, DDR Phase Control, MCH Phase Control]) - removed it, ran it as 24 pin direct as well)
    --> disabled aoip in bios as well.
    There are kernel crashes in win xp 32 , xp 64 bit, vista 32 bit ultimate, vista 64 bit ultimate (bought 2 disks to date  ) debian, knoppix, Kbuntu, Ubuntu as well.
    retested my ram , CPU at today at a highly priced and well respected shop today as well.
    Corsair engineering stated they tested compatibility with this MOBO, but when retested today couldn't seem to get it working..... ???
    Additionally, the ram states 1.7v @ 9-9-9-24 settings for optimum. the board defaults at 1.5 v (10666). these are true 1333 MHz chips, and the actual voltage is 1.6 volts with a manual setting at 9-9-9-24 (as per corsair engineering).
    They did test an XMS3 DDR3 module, but it was only the 1G x 2 set. They stated compatibility for the 4 GB (2x2GB) set due to the chip architecture alone it appears.
    Silly me for wanting to run 8 gigs on a 64 bit system...
    This board appears to have great -promise, but looking at the returns at Fry's, makes me wonder why MSI doesn't get off their ass and make drivers to work with all the main rams and cards.
    That's how the big board manufacturers used to do business, now they just don't care. 
    BTW the Visiontek 4850 cards crash randomly with the ATI.DKG Driver with this card.
    ATM, I am stuck with dual 4850s - those are going to join the P45 Diamond in the garage (decided not to throw them away as I dumped $368 (with a 2 year warranty on the MOBO) and cannot return it as it is well past 15 days at the store  , perhaps MSI will make drivers for compatibility, world peace is achieved, and the cure for cancer is found (most likely to occur first)
    I might try another MSI product in the future, but my friends (who want me to build clones of my system) do not want this board after the extend of trouble I have gone through.
    Looking at EVGA and XFX at the moment, as ASUS is having a 60% return currently (poor manufacturing practices).
    Thank You All for all the assistance in trying to help me resolve my problem.
    this is by far the most helpful forum I have ever been on. I will keep looking, and of course trying trying to get this board running in my spare time in another system, but have run out of time in trying to get my office system running, so I am sending it to a shop so I can use this overpriced ram and flawed crossfirefire system (let someone else deal with the headaches). I am still interested in the OC features on this board, but really - "Green Power for an COD board is like trying to soup up a 4 cylinder for speed and gas mileage lol.  Cheers and Have a Great Day!!!

Maybe you are looking for