Cover Open Message, hp f4480 deskjet printer

Hi,
I accidentally broke the door sensor for my printer.
The solution says: "Open Door", and it won't print.
I've tried to install the broken sensor myself, which says "C 15" on it,
but I have no idea where it is supposed to go.
Thank you.
This question was solved.
View Solution.

Hello @Jen91,
Welcome to the HP Support Forums!
I understand that you have a broken door sensor on your HP Deskjet F4480 All-in-One Printer. Unfortunately, the door sensor is a non replaceable part within your HP Deskjet printer. Therefore, to correct the 'Door Open' error message on your printer a whole unit replacement would be needed.
I would recommend at this point contacting our Technical Support queue by phone to explore hardware options.
HP Technical Support can be reached at: 800-474-6836.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
HP Worldwide Contact
I wish you luck going forward with this!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Similar Messages

A PIXMA MP170. Power & Alarm lights flash. Ink doesn't move when cover opened. Error on print (XP).

I have a PIXMA MP170. The Power & Alarm lights flash. Ink cartridges don't move when cover opened. Service Error 6500 on print from computer (XP).

Hello danlee58.
If possible, please document the error pattern that appears on the LED display of the printer. A letter and one or two numbers should be alternating.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Hp officejet pro L7590 all-in-one printers - 'door open' message

We have a 1 and 1/2 year old HP Officejet Pro L7590 all-in-one . "Door Open" message would not go away even if all the doors are intact, or after we shut it down and turn it back on after 60 seconds. We could not print, fax nor copy. We talked to HP customer service which no longer support this series. How can we bring our printer back to work?

There are at least three interlock switches that can cause this error. One is on the door that covers the ink cartridges, one is on the top lid (covering the "guts" of the printer) you lift up to service the printheads and the third is on the back duplexer; if you don't have a duplexer, there should be a cover in place. You'll need to check all three to be sure they're in working order.
I know the door covering the ink cartridges has a tendency to break off the little tab that keeps the door closed so that would be the first one I'd check. The top lid that covers the "guts" of the printer also has a small tab that goes into a hole that activates an interlock switch. If that tab is broken off, the switch does not get closed, giving you the error message you see. I've seen this broken off also, usually from closing the cover when misaligned with the receiving hole. If this one is missing, you can ball up a small piece of paper and shove it in the hole to activate the interlock switch.
The 7590 is a great printer. Much better built than the newer models and cheap to operate, IMO. Hope you can get it working again.

Error message - The HP Deskjet 1510 Series was not found

I bought the Deskjet 1514 on 19/07/15 and installed it on my relatively new laptop. It worked ok, then I did the Windows 10 upgrade on 01/08/15. I installed the updated drivers from HP for this device. What ever I do, (have uninstalled software, reinstalled at least 4 times, used the scan doctor, swapped USB cables and ports, cleaned the disk...) I just get the message The HP Deskjet 1510 series was not found, yet when aligning the ink cartridges the scanner will work but I cannot do the test scan in the scan doctor or scan anything using the HP software (which you have to do as there is no proper control panel on the actual device). As bought the device primarily as a scanner, I am not happy and just want the thing to work but haven't a clue how to proceed except to take the thing back to Tesco and get a refund and buy a Canon instead... Please can anyone help as the HP support is useless? The printer part is working fine, which makes it ridiculous.

Hey , Welcome to the HP Support Forums!
I understand that your HP Deskjet 1514 All-in-One Printer is not being detected via the USB Cable connection on your Windows 10 computer. I would like to assist you today with resolving this installation and product detection issue. Thank you for including all of the troubleshooting steps that you have attempted prior to reaching out for support. At this time I am going to have you complete some additional troubleshooting steps. We will be repeating the uninstall process for troubleshooting today as it is crucial that we have a nice clean slate to work with. Please complete all of the steps below. Please disconnect the USB Cable from your printer and computer before proceeding. Step 1: Remove Driver: 1. Click on your Start button 2. Type Programs and Features in the 'Ask me Anything' box to the right of the Start button. If you just start typing when the Start screen is open it should automatically start typing in the 'Ask me Anything' section. 3. When Programs and Features opens scroll down the list of populated programs and look for your HP Deskjet. If you see your HP Deskjet listed please click on it and choose Uninstall. Follow the onscreen prompts to complete the uninstall. 4. Next, click on the Start button and type Devices in the 'Ask me Anything' box 5. Click Devices and Printers 6. Under the Devices and Printers window look for your HP Deskjet. If the HP Deskjet is listed, please right click on it and select 'Remvoe Device' or 'Delete' 7. Next, under the Printers section in the Devices and Printers window, click on any printer that shows once just to highlight it. Click on Print Server Properties at the top of the window. 8. Under Print Server Properties, click on the Drivers tab. 9. If you see your HP Deskjet listed under Drivers, click on it and choose Remove at the bottom. 10. Click Remove Driver Only 11. Select OK 12. Select Apply and OK under the Print Server Properties window 13. Close Devices and Printers. Please proceed to the next step. Step 2: Clear Temp Files: 1. Click on your Start button 2. Type Run. Click Run to launch the Run dialogue box. 3. In the Run box type %temp% and click OK 4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight. 5. Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item. 6. Close the Temp folder once it is emptied 7. Right click the Recycling Bin on your desktop and select Empty Recycling Bin. Please proceed to the last step. Step 3: Install Device: Please click here to download and run the HP Printer Install WizardOnce the download has completed please follow the steps under the PIW to install your devicePlug in the USB Cable only when prompted by the installerOnce the installation has completed successfully please test printing and scanning to confirm that your product is functioning as per normal. Please respond to this post with the result of your troubleshooting. Good luck!

HP 4515 ALL IN ONE DESKJET PRINTER NOT SCANNING

I HAVE
OS:WINDOWS 8.1 32-BIT
PRINTER:HP 4515 ALL IN ONE DESKJET PRINTER
OVER THE PAST FEW DAYS MY PRINTER HAS STOPPED SCANNING DOCUMENTS
THE MESSAGE "NOW SCANNING" KEEPS ON COMING
EARLIER IT WAS SCANNING DOCUMENTS BUT NOW IT HAS STOPPED DOING SO
ANY SOLUTIONS?
This question was solved.
View Solution.

hI @ARYANPRINJHA ,
I see by your post that you are unable to scan. I can help you with this.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
How is the printer connected? (USB/Ethernet/Wireless)
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Need installation cd for a HPF335 all-in-one deskjet printer.

NEED INSTALLATION CD FOR AN HP F335 ALL-IN-ONE DESKJET PRINTER. WHERE CAN I GET A COPY?

Hi,
Yes, the installer is downloadable - just select your OS on the link below, open up 'Drivers - Product Installation Software' and download the Full Feature installer.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=1153494&task=...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My eprint on my all in one deskjet printer 3050 j611a is not lighting up help

My eprint on my all in one deskjet printer 3050 j611a is not lighting up help

HI Michele100,
Welcome back to the HP Support Forums. I understand the ePrint light on the front panel of your Deskjet 3050A J611 printer is not lit up.
To better assist you, would you please supply some further information:
How is the printer connected (USB cable or wireless)?
What operating system are you using on your computer? whatsmyos.com
Are you getting any error messages? If yes, what do they say?
Is the printer plugged directly into a wall outlet?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

IMac and HP 6940 Deskjet printer

I'm using an iMac 3.06 GHz Core 2 Duo 4 GB RAM and an HP 6940 Deskjet printer. Recently the printer started working erratically: printer stalls frequently, takes way too long to print pages. Driver is 4.0, no new one seems to be available. Suggestions?

"She was using the Safari browser, 7.0.5 and this has been happening since then.."
It could be malware.
Download the malware removal tool here > The Safe Mac » Adware Removal Guide
If no malware was found, open System Preferences > Printers & Scanners then select the Print tab.
Click: Open Print Queue...
Delete all print jobs.
Then restart the Mac. Turn off the printer. Wait about ten seconds then turn it back on.

HP Photomart 1000 Deskjet Printer Problems

Previously through HP Support I was able to use my old faithful and super-reliable HP Photosmart 1000 printer on Vista (32bit) with this driver installed on Vista. It was the HP 970Cse and it worked flawlessly. But now, just getting an "error" message when trying to print a test page. Anyone have any more ideas? Have tried uninstalling and reinstalling this and other printer drivers that I use regularly. Please Help! I don't want to donate this one to the landfill yet!!

Actually the Deskjet 970 drivers are a better match for the Photosmart 1000. The Deskjet 990 drivers should work for text but will probably fail for photo's and some graphics.
What happens when you try to print - are there any error messages? Does the printer go through any motions of trying to print?
Is the printer connected with USB or a parallel port? If the printer is connected with a USB port it would probably be USB001: or USB 002:, see the document here. For a parallel port the likely port would be LPt1:.
How are you printing a test page? To start I would use Notepad and try a simple text document.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Why did I get a "You Have Missed a Print" message with Daily Mail Printer Edition?

You will miss a scheduled print if your computer is turned off or not connected to the Internet, or if you are logged out. When you see the “You have missed a print” message, you can click Print to print now, or Skip.
You can set Daily Mail Printer Edition to automatically do the same thing every time you miss a print.
Open Daily Mail Printer Edition.
Click the wrench icon () to open theSettings dialog.
If you want missed items to print immediately when you log in, select Automatically. If you want to be asked before an item is printed, select When Prompted. If you always want to skip missed items, select Never.
Did this answer your question? If it did, why not click the Kudos! button to the left?
If it didn’t answer your question about a printing problem, click Reply to ask the community, or search the forum for other posts that might help.
Or click here to go back to the Guide to Printing Daily Mail Printer Edition Sections.
I work on HP's behalf.

hi i'm a new user and i'd like to be able to print a PAST crossword from the Universal Crossword please know this is not a printing problem but i hope you will be able to help me find an archived crossword puzzle for April 24, 2012 Thank You!

Deskjet printer woes

I have a 720C deskjet printer. Yes, it is old but it works well, or did until we got Vista. The instalation CD says it works for windows 3.1x, Windows 95, and windows NT 4.0.    It had been working on windows XP home edition and I think when it was set up that we got dsome sort of update-patch-fixer from the HP website.
At present my computer is correctly identifying the printer, it comes on and the paper will begin to feed, it makes the "I'm ready" noise and then it just sits there with its little green light blinking away.
Is there anything I can do? I'm not geeky.

This reply is to: Bob Headrick, Microsoft MVP Printing/Imaging
Bob, thank you for trying to help me with this issue.
Your hyperlink. which leads to the instructions for "Installing the Printer Driver Located in the Windows Vista Operating System" is exactly what I did. I've followed your instructions again so that I can provide you with the details of what's happening:
1. "Installing the Printer Driver Located in the Windows Vista Operating System" gives two choices depending upon the type of cable you are using. I went the route
     of "USB Cable". The reason for this choice is that with Windows XP, I was using a Parallel cable on a computer that had a Parallel port and the printer worked
      fine. I've since gone to a new computer that does not have a Parallel port, and thus, purchased a USB to IEEE 1284 Parallel Printer Cable.
      [By the way, I'm using this exact same type USB to Parallel printer cable for my HP LaserJet 2100 on the new computer running Vista 64 and the LJ2100 works
     just fine.]
2. After the printer has been turned on and I connect the cable, I get a "Driver Software Installation" popup that says:
    "HEWLETTPACKARDDESKJET 720C ... Searching Windows Update"
      A few seconds later the popup updates with "Installing Driver Software"
      Just a few seconds after that the popup updates with "Ready to use"
3. I then open up the Printers folder. It shows the 720C in "Ready" state.
4. I then right-click the 720C, select "Properties" from the dropdown and click on the button "Print Test Page"
5. A popup entitled "HP DeskJet 720C" indicates "A test page has been sent to your printer" however, the green light on the printer doesn't flash, there is no noise
    coming from the printer (like it's about to print), and no test page prints.
6. I get similar results if I go to Microsoft Word to print a document. The print queue shows that the document is spooling and then the document quickly disappears
    from the print queue.
I hope these details help you in helping me! Thanks so much!

Cannot open message catalog when invoked through JNI

Hello there.
I'm having the following problem:
I've coded a simple workstation tuxedo client (tuxedo version 9.1) that uses a couple of services. When I compile it as an executable and run it everything works fine, with no issues. However, when compiled as a dynamic library and invoked from JAVA via JNI, all functionalities operate correctly (the client connects to the server and invokes the services without a hitch), except that in the event of an error, when I invoke the function tpstrerror(), the following error is returned instead of the proper error description:
NLS:4: Cannot open message catalog LIBWSC_CAT, set 1, num 1142; check TUXDIR=/home/adrian/bea/tuxedo9.1, LANG=C
I've checked and re-checked the environment variables. I now include the values for those I think could be relevant to the issue, printed in the C code, obtained with the getenv() function.
These are the values printed when run as an executable:
TUXDIR=/home/adrian/bea/tuxedo9.1
LANG=en_US.UTF-8
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11:/usr/games:/usr/java/jdk1.5.0_06/bin:/home/adrian/bea/tuxedo9.1/bin
NLSPATH=/home/adrian/bea/tuxedo9.1/locale/C
And these when run as a dynamic library invoked from Java code:
TUXDIR=/home/adrian/bea/tuxedo9.1
LANG=en_US.UTF-8
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11:/usr/games:/usr/java/jdk1.5.0_06/bin:/home/adrian/bea/tuxedo9.1/bin
NLSPATH=/home/adrian/bea/tuxedo9.1/locale/C:/usr/dt/lib/nls/msg/%L/%N.cat
The only difference is marked in bold, but I don't think it matters much (don't know what is appending that extra value to the variable though).
I've tried setting LANG=C and NLSPATH=/home/adrian/bea/tuxedo9.1/, with no luck. Is there maybe a native library that has to be included in order to open the message catalogs that is not in TUXDIR/lib?
I'd highly appreciate if anyone could point me in the right direction here.
Thank you in advance for taking the time to read the post.
Regards.
Edited by evertonland at 01/31/2008 7:10 AM

Haven't entirely given up on solving this "the right way", but implemented a partial solution that is of some help nonetheless. Check out the following thread if by some cruel whim of fate you're having this same problem:
http://forums.bea.com/thread.jspa?threadID=300005078

I installed a new printer and now Photoshop Elements tells me I can't print. The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to che

I installed a new printer and now Photoshop Elements tells me I can't print. The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to check your printer settings before printing." I have uninstalled and re-installed Photoshop Elements, checked my printer settings and still I can't print a photo.

Hi ,
Please update to PSE 13.1
13.1 has solved this problem.
Refer to this link.
Photoshop Elements Help | Printer errors with Photoshop Elements 13

Bridge CC. on opening message says unable to read cache, purge cache. This does not help.

On opening message says unable to read cache, purge cache. Purging the cache does not help and Bridge continues to hang. Was working fine before.

Mac? REad this http://forums.adobe.com/thread/1237168

My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

Restart your WiFi router and printer by removing power for 30 seconds.

Cover Open Message, hp f4480 deskjet printer

Similar Messages

Maybe you are looking for