CProject descriptions in Display working time report

Hi Gurus,
in our system we set the integration with HR, and we tranfer via ALE personnel numbers from R/3 to BP in cProject. We record time with timesheet to wbs linked to cProject tasks.
I have a problem in report CATS_DA "Display working time" with cProject descriptions
In this report, fields CPR_TEXT & CPR_OBJTEXT in the CATSDB_ALV output structure are always blank. I checked table IAOM_CPRO_EXAT in R/3, where cProject description can be found, but it seems that no access to this table is done when executing CATS_DA.
Any idea how to show cproject task and project destription in CATS_DA?
Thanks in advance
Roberto

Hi Roberto,
I think, the description of the project should be retrieved remotely from cProject system.
You can apply the check report in
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=61926
and debug the result of the call:
Get worklist for cProjects
CALL FUNCTION 'DPR_API_CATS_WORKLIST' DESTINATION lt_receivers
   EXPORTING
Kind regards,
Zhenbo

Similar Messages

  • G/L Account Description not displaying in the report

    Hi Friends,
    G/L account description was not found in the report, after loading g/l text and attribuites. Please help me what might be the problem in this regard.
    Regards,
    Raju..

    Is G/L Account depends on Chart of Accounts. Is their any way that G/L acount and description is displayed in report. G/L Account is appearing but not descrition. Master data attr & text loaded fine.
    Raju

  • Parameter Description value display on Crystal Report

    Hi
    I have created a Parameter based off OPCH.Project, so within the Project Parameter the values are the Project Codes and under Description I have the Project Names.
    Is it possible to display this Project Description value on the Crystal Report when previewing instead of the Project Code?
    Regards
    Kurt Walters

    hello Kurt,
    i think your having problem with the join..
    in A/P Invoice the Project is populated in the line level (PCH1) and not in the header (OPCH) so your join should be PCH1.Project inner join OPRJ.Project
    here is my sample query, try to run this in your machine
    SELECT T0.[DocNum], T0.[DocDate], T2.[PrjName], T0.[DocTotal]
    FROM OPCH T0  INNER JOIN PCH1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OPRJ T2 ON T1.Project = T2.PrjCode
    WHERE T1.[Project] = 'ProjectCOde'
    just replace ProcjectCOde to your actual project code
    i have also made a sample report in my crystal here, i added OPCH, PCH1 & OPRJ, then from your menu Database -->> Show SQL Query, your Query should look like this
    SELECT "OPCH"."DocNum", "OPCH"."DocDate", "OPRJ"."PrjName", "OPCH"."DocTotal", "OPRJ"."PrjCode"
    FROM   ("Production"."dbo"."OPCH" "OPCH" INNER JOIN "Production"."dbo"."PCH1" "PCH1" ON "OPCH"."DocEntry"="PCH1"."DocEntry") INNER JOIN "Production"."dbo"."OPRJ" "OPRJ" ON "PCH1"."Project"="OPRJ"."PrjCode"
    WHERE  "OPRJ"."PrjCode"=N'ADM-1001'
    ORDER BY "OPCH"."DocNum"
    observed that i dont have the U_WPANO, just add it in your filter record.
    your current settings in Select Expert -- Record is good enough
    {OPCH.Project} = {?Contract Name} and
    {OPCH.U_WPANO} = {?WPA Number}
    hope this may finally solve your issue, but if not please let me know.
    best Regards,
    Fidel

  • Non working times report in pwa 2010

    how can I report out non working time for resources?

    See this similar
    post for a code oriented solution for resources.
    This
    post gives a similar code for project exceptions.
    Otherwise, select Reports | Assignment | Who Does What, edit the Report, and then within the Details Tab, select Calendar under the resource column.  It will list each resource's calendar and non working time. See reference
    here.
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

  • ABAP Dump when selecting Calendar Field for selection in Working Time reports

    Hi Team,
    Out client gets a weird issue, when he selects date from selection he gets dump, this is happening only in his system, If he tries from his same user id from different machine, he is not getting the error.
    Dump details below
    What happened?
        The current application program detected a situation which really
        should not occur. Therefore, a termination with a short dump was
        triggered on purpose by the key word MESSAGE (type X).
    Thanks ~ Priya

    Hi Krishnan,
    this issue is most likely related to some missing\unregistered components in SAPGUI folder. There are a few ways to solve this kind of errors:
    1. In order to check it, ask your client to go to 'C:\Program Files (x86)\SAP\SapSetup\Errors\' path and open an .xml file, which is the error report file that contains error log created during SAPGUI client installation. The erroneous modules can be registered by using regsvr32 command via command line. (Make sure you have Administrator rights while doing this.)
    2. If previous step did not help, run SAP Logon, goto Options->System Information->'Check SAP GUI Installation' and run the report.It will open an xml file with the errors report.
    3. If none of steps helped, then reinstall SAPGUI client. You need to run installation under Administrator user rights.
    BR

  • HR Securtity Issue with CATS_APPR_LITE - Approve Working Times and query

    hi Gurus
    here is the our issue :
    1. User need access to do timekeep as well as query . In order to process the time keep task one of the transaction used in the process is CATS_APPR_LITE which requires P_ABAP in the role or by transaction ( Se93 added P_abap object) .
    From the query side role this should not have P_ABAP since giving access to this will have access to sensitive data even though the roles are restricted by Personal area or structural authorisation.
    If both roles are assigned to users then P_ABAP from the timekeep role will overwrite the query roles and users get access to data for which they should not see .
    We have created dual sign on to avoid this task but is there a better way that users can do this task by just single id.
    any suggestions

    Hello,
    CATS_APPR_LITE is meant for Time Approval
    CATS_DA is meant for Display Working Times.
    Can you ellaborate more if this does not solve your inquiry?
    Thanks.
    REgards,
    Bentow.

  • Report to display Average time taken for processing payments".

    Hi,
    I have been asked to develop a report for "Report to display Average time taken for processing payments".
    Could any one guide me technically what are the different tables i need to take to generate the report. Treat this is very urgent. Pls provide sample code too....
    Thanks in advance....

    Given below is the set up for credit card payment processing:
    Set Up Credit Control Areas:
    Define Credit Control Area
    Transaction: OB45 
    Tables: T014
    Action: Define a credit control area and its associated currency.  The Update Group should be ‘00012’.  This entry is required so the sales order will calculate the value to authorize
    Assign Company Code to Credit Control Area
    Transaction: OB38
    Tables: T001
    Action: Assign a default credit control area for each company code
    Define Permitted Credit Control Area for a Company
    Code
    Transaction: 
    Tables: T001CM
    Action: For each company code enter every credit control area that can be used
    Identify Credit Price
    Transaction: V/08
    Tables: T683S
    Action: Towards the end of the pricing procedure, after all pricing and tax determination, create a subtotal line to store the value of the price plus any sales tax.  Make the following entries:
    Sub to:  “A”
    Reqt:  “2”
    AltCTy:  “4”
    Automatic Credit Checking
    Transaction: OVA8
    Tables: T691F
    Action: Select each combination of credit control areas, risk categories and document types for which credit checking should be bypassed.  You need to mark the field “no Credit Check” with the valid number for sales documents.
    Set Up Payment Guarantees
    Define Forms of Payment Guarantee
    Transaction: OVFD
    Tables: T691K
    Action: R/3 is delivered with form “02” defined for payment cards.  Other than the descriptor, the only other entry should be “3” in the column labeled “PymtGuaCat”
    Define Payment Guarantee Procedure
    Transaction: 
    Tables: T691M/T691O
    Action: Define a procedure and a description. 
    Forms of Payment Guarantee and make the following entries Sequential Number  “1” 
    Payment Guarantee Form “02”
    Routine Number   “0”    Routine Number can be used to validate payment card presence.
    Define Customer Payment Guarantee Flag
    Transaction: 
    Tables: T691P
    Action: Define a flag to be stored in table. 
    Create Customer Payment Guarantee = “Payment Card Payment Cards (All Customers can use Payment Cards)”.
    Define Sales Document Payment Guarantee Flag
    Transaction: 
    Tables: T691R
    Action: Define the flag that will be associated with sales document types that are relevant for payment cards
    Assign Sales Document Payment Guarantee Flag
    Transaction: 
    Tables: TVAK
    Action: Assign the document flag type the sales documents types that are relevant for payment cards.
    Determine Payment Guarantee Procedure
    Transaction: OVFJ
    Tables: T691U
    Action: Combine the Customer flag and the sales document flag to derive the payment guarantee procedure
    Payment Card Configuration
    Define Card Types
    Transaction: 
    Tables: TVCIN
    Action: Create the different card types plus the routine that validates the card for length and prefix (etc…) 
    Visa , Mastercard, American Express, and Discover 
    Create the following entries for each payment card 
    AMEX  American Express ZCCARD_CHECK_AMEX Month
    DC  Discover Card  ZCCARD_CHECK_DC  Month*****
    MC  Mastercard  ZCCARD_CHECK_MC  Month
    VISA  Visa   ZCCARD_CHECK_VISA  Month
    The Routines can be created based on the original routines delivered by SAP. 
    *****SAP does not deliver a card check for Discover Card. We created our own routine.
    Define Card Categories
    Transaction: 
    Tables: TVCTY
    Action: Define the card category to determine if a
    payment card is a credit card or a procurement card.
    Create the following two entries
    Cat Description  One Card  Additional Data
    CC Credit Cards  No-check  No-check
    PC Procurement Cards No-check  Check
    Determine Card Categories
    Transaction: 
    Tables: TVCTD
    Action: For each card category map the account number range to a card category.  Multiple ranges are possible for each card category or a masking technique can be used.  Get the card number ranges from user community.  Below is just a sample of what I am aware are the different types of cards. 
    Visa Credit  Expires in 7 days. 
        400000   405500
        405505   405549
        405555   415927
        415929   424603
        424606   427532
        427534   428799
        428900   471699
        471700   499999
    Visa Procurement  Expires in 7 days.
        405501   405504
        405550   405554
        415928   415928
        424604   424605
        427533   427533
        428800   428899
    Mastercard Credit Expires in 30 days
        500000   540499
        540600   554999
        557000   599999
    Mastercard Procurement Expires in 30 days
        540500   540599
        555000   556999
    American Express Credit Expires in 30 days
        340000   349999
        370000   379999
    Discover Card Credit Expires in 30 days
        601100   601199
    Set Sales Documents to accept Payment Card Information Transaction: 
    Tables: TVAK
    Action: Review the listing of Sales Document types and enter “03” in the column labeled “PT” for each type which can accept a payment card
    Configuration for Authorization Request
    Maintain Authorization Requirements
    Transaction: OV9A
    Tables: TFRM
    Action: Define and activate the abap requirement that determines when an authorization is sent.  Note that the following tables are available to be used in the abap requirement (VBAK, VBAP, VBKD, VBUK, and VBUP).
    Define Checking Group
    Transaction: 
    Tables: CCPGA
    Action: Define a checking group and enter the
    description.  Then follow the below guidelines for the remaining fields to be filled.
    AuthReq Routine 901 is set here.
    PreAu  If checked R/3 will request an authorization for a .01 and the authorization will be flagged as such. (Insight does not use pre-authorization check).
    A horizon This is the days in the future SAP will use to determine the value to authorize
    (Insight does not use auth horizon period).
    Valid  You will get warning message if the payment card is expiring within 30 days of order entry date. 
    Assign Checking Group to Sales Document
    Transaction: 
    Tables: TVAK
    Action: Assign the checking group to the sales order types relevant for payment cards
    Define Authorization Validity Periods
    Transaction: 
    Tables: TVCIN
    Action: For each card type enter the authorization validity period in days.
    AMEX American Express 30
    DC Discover card  30
    MC Master card  30
    VISA Visa   7
    Configuration for clearing houses
    Create new General Ledger Accounts
    Transaction: FS01
    Tables: 
    Action: Two General Ledger accounts need to be created for each payment card type.  One for A/R reconciliation purposes and one for credit card clearing.
    Maintain Condition Types
    Transaction: OV85
    Tables: T685
    Action: Define a condition type for account determination and assign it to access sequence “A001”
    Define account determination procedure
    Transaction: OV86
    Tables: T683 / T683S
    Action: Define procedure name and select the procedure for control.  Enter the condition type defined in the previous step.
    Assign account determination procedure
    Transaction: 
    Tables:
    Action: Determine which billing type we are using for payment card process.
    Authorization and Settlement Control
    Transaction: 
    Tables: TCCAA
    Action: Define the general ledger accounts for reconciliation and clearing and assign the function modules for authorization and settlement along with the proper RFC destinations for each.
    Enter Merchant ID’s
    Transaction: 
    Tables: TCCM
    Action: Create the merchant id’s that the company uses to process payment cards
    Assign merchant id’s
    Transaction: 
    Tables: TCCAA
    Action: Enter the merchant id’s with each clearinghouse account

  • Displaying Non-Work time for all resources via a Calendar?

    I am looking for a way to display a calendar or a view of all resources that will show the planned vacation time for each resource based on the "non-work time" set in each resource calendar.

    Hi,
    As workaround solution, through P6 professional you can create a report with choosing
    "Resources" as subject Area and selecting "Time Distributed Data" option and,
    At "Time Intervals Field" you can select "Limit" to be distributed.
    This will give you a tabular report showing resource limit over selected period with selected intervals.
    Regards,
    Marcos

  • Calendar Displays CDT time in Description

    Hello All,
    I am on iOS 8.2 and my calendar on my iPad displays CDT time zone in my description events. My iPad calendar synchronizes from Microsoft Exchange Outlook calendar. I am located in Eastern Time and whenever I accept calendar invites it displays CDT in the calendar description on the iPad. On the left side of the calendar (day view) the meetings goes into the correct time slot for Eastern Time but it displays CDT time in description. So we have this dual time zone issue and can be confusing.
    How can I have CDT time display disappear from my Calendar description?
    I tried:
    1) Manually setting my location in calendar and general in the iPad.
    2) Resetting my iPad.
    3) Contacting my Exchange admin and make sure my time zone is set correctly on their end.
    Nothing works, I spoke to Apple Senior level Support and there is no solutions. Is this similar to the GMT bug or something on my end?. Because I never had this issue since i upgraded to 8.0 iOS
    Thanks!

    I have the same issue since updating to iOS 8. Search for GTM bug. Sounds like we have to wait for Apple to fix their end for MS Exchange accounts.

  • SAP HR : Wrong working days displayed in Z report

    Dear Friends ,
    I have made a z report for SAP- Hr to show working days of employee of a particular month
    when I am running report for all the employees then working days are wrongly displayed in alv
    report but when I am running the report for a particular employee then the working days are
    correct . I have done debugging also , every thing is fine in debugging , Now I am confused
    where is fault I have to run the report for all employee.
    Kindly suggest .
    Regards
    Rihan
    SAP-abaper

    hye ,
    here, some code for your reference ,
    LOOP AT it_empall WHERE pernr EQ stru-pernr.
          SELECT SINGLE SUM( abwtg ) FROM pa2001
                              INTO absdays
                              WHERE pernr = it_empall-pernr
                              AND   endda BETWEEN p_begda AND p_endda
                              AND   begda BETWEEN p_begda AND p_endda.
    "FOR RESIGN
            select single begda from Pa0000 into enddt where pernr eq it_empall-pernr
                                                       and massn eq 'H6'.
    "FOR HIRING
             select single begda from Pa0000 into begdt where pernr eq it_empall-pernr
                                                       and massn eq 'H1'.
         totdays = p_endda - p_begda.
          totdays = totdays + 1.
         if enddt GT p_begda and enddt LT p_endda.
                           X = ( p_endda - enddt ) + 1 .
                           workdays = totdays - x - absdays.
                           stru-kaltg = workdays.
         elseif begdt GT p_begda and begdt LT p_endda.
                          X = ( begdt - p_begda ) .
                          workdays = totdays - x - absdays.
                          stru-kaltg = workdays.
         else .
                          workdays = totdays - absdays.
                          stru-kaltg = workdays.
         endif.
      ENDLOOP.
    Note : here p_begda AND p_endda are month start and end date.
              and begdt and enddt  (  these are  employee joined and resigned date)
    Pls suggest .....

  • Header information not displaying in ABAP Webdynpro record working time

    1. I am not seeing the header information, personnel number, name, cost center, on the ABAP Webdynpro record working time timesheet. When I run the timesheet profile in CAT2 the header contains the personnel number, name, cost center, but these do not display when the ABAP Webdynpro timesheet is run
    2. Is there a version of the ABAP webdynpro timesheet that prompts for the personnel number, date and profile prior to executing the timesheet?  I want to define an ESS link for managers to update timesheets of individual teammates.  The teammate do not necessarily have to be their direct reports

    Hi David,
    CATS Webdynpro application is a OIF fpm. Please check if you have performed the FPM IDR configuration properly.
    In standard, the ESS CATS does not prompt for the personnel number except in CE scenario. In MSS addon, you have an option to launch the ESS CATS application on-behalf of the employee. Please refer to the sap library documentation.
    Hope this helps,
    Regards,
    Roy

  • Displaying date/time in the report of last updating data?

    Hi,
    I have produced a report over a multiprovider. The multiprovider is built up from tow cubes. The data is being updated to one cube each hour and to the another cube one time daily.
    The date/time that display in the report is for the last updating data of the cube that updating one time daily.
    I want that the date\time be updated each hour, in another words, to display the date\time of last updating data to the second cube.
    Any suggestions?

    Hi Mohamad,
    Please read through this discussion for a solution:
    ROLLUPTIME of a multiprovider
    Hope this helps...

  • Time display in Query/Report

    Hi,
    If I don't select/restrict a "time" characteristic in a query, I guess all data (for entire time in the InfoCube) is displayed in the report? Correct? Is it possible to modify this display by default?
    Thanks
    Sabine

    Hi Sabine,
    Yes. If you do not restrict your query by any time characteristic, it will display all the records that matches your other selection criteria. The time characteristics you see in the query are the only ones included in your cube.
    If you would like to restrict the query output by a certain time criteria, you may do so by dragging your time characteristic into the filter area of BEx and selecting the values you want to display. Or you may drag your time characteristic and then select the filter values after executing the query. Hope this helps.
    Juice

  • Unable to get the form displayed in Working Time

    Hi,
    We are implementing ESS with ECC5.0 on EP6. When I go for Working time and click on Time Statement for a Chosen period .. below it doesn't display me the form needed.
    I have checked from the Tx : HRFORMS, the Form Name :SAP_TIM_99_0001 & 0002 are active.
    Is there anything else i need to configure at the r/3 end to get that display on portal?
    Need help on this ..
    Thnks in advance.
    Vijay

    Hi Aniket,
    To the Clusters .. do you mean at the j2ee engine side?can you please give me info in detail
    Thnx for valuable inputs
    Vijay
    Message was edited by:
            NR

  • Working time page in ESS not displaying the way I configured in SPRO.

    Hi  Experts
    In SPRO I have assigned service EMPLOYEE_WORKTIME_Proxyworktime05 to subarea record working time.
    Now instead of showing the link to record working time and its text description as done in SPRO my portal is showing two links under record working time 1.Record working time(no text) 2 Release working time (no  text).
    In my development portal everthing is working fine but in QA its behaving the way mentioned above.I have done same configuration for both.
    Please help me resolve it.

    Thanks

Maybe you are looking for