CProjects Status report not visible

Hi
I am trying to disply the project status report but unable to do so.
When I click on Preview butttonto display status report, new screen opens with Save, Save and Send and cancel button but could not see report there.
Is there anything missing with JAVA applate setting?
Working on ECC6 server.
Thanks and Regards,
Niraj Sikligar

Hi Niraj,
Run the following reports in Transaction SE38
1. FP_PDF_TEST_00
specify connection as ADS
This should return certain version information. If this is succesfull go for the next one.
2. FP_TEST_IA_01
Keep everything on the selection screen as it is and execute.
Note: If you get an error that says: "Cannot find PDL type for output device LOCL",
Open the report in SE38 in display mode.
Navigate to the source code:
* Set output parameters and open spool job
fp_outputparams-preview  = 'X'.    " do not launch print preview
fp_outputparams-nodialog = 'X'.      " suppress print dialog
fp_outputparams-connection = p_conn.
Place a session break-point on
fp_outputparams-connection = p_conn.
and then execute the report (F8).
When it stops at the break-point, double click on fp_outputparams-nodialog  and remove the X on it.
(you may take help from a technical guy here)
Continue by pressing F8.
A print pop-up will appear, change output device from LOCL to PDF1 and continue (F8).
Check wether a form is displyed or not.
Regards,
Reema.

Similar Messages

  • CProjects Status Report Printing

    Good Morning,
    Is it possible to restrict for certain users not have view/print the cProjects status report,  but they should able to access all project types for other part of the cProjects elements, if any one done this before = please share with me?
    Regards
    Goli.

    Hi Goli,
    You can do this by hiding the "Status tab" for those users. Take help of basis team.
    Regards,
    Yaghag

  • CProjects Project status report not generated

    Hi
    I am facing problem of getting Project status report for a project in cProjects 4.0
    I am at client side and accessing the IDES ECC6.Her I am trying for getting Project status report for the project created.
    The error I am getting is :
    "WebDynpro Exception: ADS: Request start time: Thu Aug 21 16:53:27 GMT+03:00 2008(200,101). "
    In customizing for cProjects I have used the std. form available for the same, activated the same for the project type and when tried to get the report I got the above mentioned error.
    Then in se38 I executed the programme FP_TEST_IA_01 the result was :
    ADS: Request start time: Thu Aug 21 17:23:42 GMT+03:00 2008(200,101)
    Also I have activated the following services
    SICF->Services->default_host->sap->bc->fp and fpads, both are active.
    But still I am not getting project status report from cProjects.
    Please guide me what else should I do to get the project status report?
    Thanks and Regards,
    Niraj Sikligar

    Hi Reema,
    Its great to hear from you.
    I have run the report : FP_PDF_TEST_00
    Out put is :
    Version Information:                705.20060620101936.310918
    What does that mean ?
    Secondly,
    I have checked RFC destination for ADS the results were as shown below:
    On Technical Settings tab page :
    target host: ides
    Path prefix: /AdobeDocumentServices/Config?style=rpc
    Is this OK?
    Is there anything else to be done?
    Regards,
    Niraj Sikligar

  • Report Viewer Webpart IE9 issue -Reports not visible

    Hi,
    we have several installations using Sharepoint 2010 together with Reporting Services 2008 and 2008R2.
    When displaying reports in Sharepoint through the report viewer webpart, the rendering in IE9 will sometimes not display the report. This means
    the Sharepoint site including the report viewer headline is visible, but the report itself is not rendered. After pressing ctrl+F5 the report most of the time will show up. When viewing the logs of reporting services it is clear that the report has been executed,
    but as stated it was not visible in IE9.
    Even when forcing IE9 to render all Websites in compatibility mode there is no change. Out of 10 times the report is roughly 3 times not visible.
    On systems still using IE8 there are no problems at all.
    Any ideas?
    Regards,
    Andre

    Hi,
    I just want to know whether this problem occurs on all the computers which installed Internet Explorer 9? As a test, please try to reset IE then check the result again:
    1.      
    Run Internet Explorer, use Alt + T to open Tools menu, choose Internet Options.
    2.      
    Choose Advanced tag, click “Reset…” button, click OK in the pop-up box.
    3.      
    Click OK to close Internet Options, then restart Internet Explorer.
    In you have any progress, please let me know.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • PowerView report not visible in Excel web App

    Created a report using PowerView in Excel 2013 but it is not visible when i am viewing in Excel Web App?
    Is there any settings we need to enable?
    Kindly suggest.

    Good question. This is something that's really hard to find an answer to in the docs. But as far as I can tell, you need SQL 2012 sp1 Enterprise or BI edition. Also, SSRS will have to be installed and configured in SharePoint integrated mode. Also, Excel
    services will need to be configured to be used, not Excel Web apps.
    For me, part of the confusion comes from the fact that there are actually several versions of Power View, and the docs are not always clear which version they're referring to, so my answer might be wrong.
    Supporting links:
    Excel 2012 sp1:
    http://msdn.microsoft.com/en-us/library/gg492257.aspx
    Enterprise or BI, SSRS in Integrated mode:  http://technet.microsoft.com/library/cc645993(SQL.110).aspx
    Excel services, not Excel Web apps:
    http://office.microsoft.com/en-us/excel-help/power-view-in-excel-on-office-365-or-in-sharepoint-server-HA103276078.aspx?CTT=5&origin=HA102835634
    Mike G.

  • DBACockpit - Generate AWR reports not visible

    Hello,
    i have read the "SAP on Oracle Development Update":
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a07754d4-edd4-2910-0683-c9473aaeca51
    On page page 27 is a screenshot of the possibility to generate AWR reports out of DBACOCKPIT.
    I have an ABAP system on SAP_BASIS 7.00 with Patchlevel 15 (SAPKB70015) but i can not see this menu option. I only have the "Active Session History" but no "Workload Reporting".
    As described in sapnote #1028068 the monitored database is a local one and the licenses are purchased by SAP. The note also describes that the function should be available with SP12.
    What's wrong? Have you already checked your system for this point?
    Regards
    Stefan

    Hello Stefan, Hello Bill,
    we had the same problem. In 7.00 SP12 you can select the option, in SP15 it is not visible. We opened a customer message and were told, that there were some irritations arount the license of Oracle Diagnostic Pack, so SAP deactivated it in DBACOCKPIT/SP15. This is no problem any longer (note 1028068).
    In later SPs you can set an option (have look at note 1136582 / 1250596), but in SP15 you have to modify the source code. Unfortunately SAP isn't able to ship this via snote. In this case it might be better to open a customer message to get a detailed information.
    Regards
    Andreas

  • SSRS report not visible in Chrome, found the fix but don't understand where CTL_032 was determined.

    SSRS reports come up blank in Chrome. I found the solution listed numerous times. I am running SQL Server 2012. 
    Tried div#ctl31_ctl09 and ctl31_ctl10 but finally got to div#ctl32_ctl09 that worked. Where in the heck to I find the clt codes for the curretn version of SQL and can I find all ctl codes and just list them all so I don't have to worry about what one.
    div#ctl31_ctl09,
    div#ctl31_ctl10,
    and so on.
        overflow: visible !important;
    David Young

    Hello David,
    See Planning for Reporting Services and Power View Browser Support (SSRS 2014); Chrome is not supported, on IE, Firefox and Safari.
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Current Status report not updating

    Over the past few months I have been getting more and more problems where the "Current Status" indication is wrong.  Usually I can get the "Current Status" back to being accure by going to File/Refresh.  In the past when something changed the status, like a restart taking the system off line for a few seconds, the current status would update back to Available once the remote computer completed its reboot.  Now however there is about an equal chanve that the status indicated in ARD will or will not update automatically when the status changes.  If the status remains at ARD Not Available or Sleeping or something else ARD will not control that system till I manually do a refresh and then initiate the new action.
    This is more of an irritant than a major problem but it sure would be nice if I could get ARD back to correcting and updating the indicated status correctly.  This is with the 3.5.1 ARD Admin software.  Any Ideas?

    A few things I would suggest you do to determine where the problem lies.
    1) Create an Essbase pull sheet in Excel that mimics the form and verify you see the data in Essbase -- you should see it just after your form is saved.
    2) Compare the dimensions on your report with those on the Form. I would guess your report has an upper level member that is not dynamically calculated -- if this is true then if you really want the report to show the exact data as the form then update the report appropriately.
    Good Luck,
    -John

  • MCTC report not visible for particular period.

    Hi.
    I am uanble to see data in MCTC t code.
    Figures are visible Nov Month
    Figures Not are visible Dec Month
    MCTC report itself doesnt fetch data for Jan Month.
    Any  configuration need to be maintained?
    Customer & material both marked for statistical group.
    Reg.
    Amol

    Hi Amol,
                   Do as suggested above- Click on user settingsParameters-- Inclusde (With current peroid Check box should be ticked) in selection proposal. And make sure that the material has the  material stastics group in sales org2. Kindly please let me know If you need any more information on this.
    Regards,
    Ram Pedarla

  • SCCM 2012 Reports not visible

    Hi All,
    I am unable to view Reports in the SCCM CM 2012 console and the URL.
    I have installed the Reporting service in DB server and later also ran the Reporting service configuration on DB server.
    After that I am able to browse to the URL but do not see any default reports.
    I have followed http://www.windows-noob.com/forums/index.php?/topic/4550-using-sccm-2012-rc-in-a-lab-part-11-adding-the-reporting-services-point-role/
    Please suggest

    Hi,
    This is what I am getting in the log SRSRP
    Any Suggestions
    Timed Out... SMS_SRS_REPORTING_POINT
    4/7/2013 7:30:43 AM 4012 (0x0FAC)
    Reporting Services URL from Registry [http://ushtsawphxp015:8080/ReportServer/ReportService2005.asmx]
    SMS_SRS_REPORTING_POINT 4/7/2013 7:30:43 AM
    4012 (0x0FAC)
    The request failed with HTTP status 401: Unauthorized.
    SMS_SRS_REPORTING_POINT 4/7/2013 7:30:43 AM
    4012 (0x0FAC)
    (!) SRS not detected as running SMS_SRS_REPORTING_POINT
    4/7/2013 7:30:43 AM 4012 (0x0FAC)
    Failures reported during periodic health check by the SRS Server USHTSAWPHXP015.PHXCORP.COM.
    SMS_SRS_REPORTING_POINT 4/7/2013 7:30:43 AM
    4012 (0x0FAC)
    Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT
    4/7/2013 7:30:43 AM 4012 (0x0FAC)
    Timed Out... SMS_SRS_REPORTING_POINT
    4/7/2013 7:31:43 AM 4012 (0x0FAC)
    Reporting Services URL from Registry [http://ushtsawphxp015:8080/ReportServer/ReportService2005.asmx]
    SMS_SRS_REPORTING_POINT 4/7/2013 7:31:43 AM
    4012 (0x0FAC)
    The request failed with HTTP status 401: Unauthorized.
    SMS_SRS_REPORTING_POINT 4/7/2013 7:31:43 AM
    4012 (0x0FAC)
    (!) SRS not detected as running SMS_SRS_REPORTING_POINT
    4/7/2013 7:31:43 AM 4012 (0x0FAC)
    Failures reported during periodic health check by the SRS Server USHTSAWPHXP015.PHXCORP.COM.
    SMS_SRS_REPORTING_POINT 4/7/2013 7:31:43 AM
    4012 (0x0FAC)
    Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT
    4/7/2013 7:31:43 AM 4012 (0x0FAC)
    Timed Out... SMS_SRS_REPORTING_POINT
    4/7/2013 7:32:43 AM 4012 (0x0FAC)
    Reporting Services URL from Registry [http://ushtsawphxp015:8080/ReportServer/ReportService2005.asmx]
    SMS_SRS_REPORTING_POINT 4/7/2013 7:32:43 AM
    4012 (0x0FAC)
    The request failed with HTTP status 401: Unauthorized.
    SMS_SRS_REPORTING_POINT 4/7/2013 7:32:43 AM
    4012 (0x0FAC)
    (!) SRS not detected as running SMS_SRS_REPORTING_POINT
    4/7/2013 7:32:43 AM 4012 (0x0FAC)
    Failures reported during periodic health check by the SRS Server USHTSAWPHXP015.PHXCORP.COM.
    SMS_SRS_REPORTING_POINT 4/7/2013 7:32:43 AM
    4012 (0x0FAC)
    Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT
    4/7/2013 7:32:43 AM 4012 (0x0FAC)
    Murali Krishna V.S

  • Post OSD deployment advertisment status report not show succeeded. Report show "Will Not Rerun"

    Hi,
    When deploying image with SCCM 2007 OSD and deployment finish successfully, in report "Status summary of a specific
    task sequence advertisement" status for deployed machine is not successfully but show "Will Not Rerun"
    I have hundred of machines to deploy and i must click on every machine in report to verify if task was finish successfully.
    Please help
    Thanks
    hrvoje

    One more thing. If I remove machine from collection immediately after task start on this machine, status in report show successfully after task was finished. And in console there is no obsolete record for this machine. ?!?!
    hrvoje

  • Status reporting not working

    Suddnenly last week the status of the ARD clients stopped being available to me. I cannot see who is logged in, ARD version, current application or scan for new clients. I have a feeling either a port block on port 3283 has been set or ARD Admin is no longer using this port.
    I can still observe and control (used by port 5900) ARD clients that are in my All computers list but cannot see the clients status.
    has anyone else seen this?
    System 10.7, ARD Admin 3.5, clients a mix of 3.4 and 3.5.1

    Hi Samtom,
    I would have to ask, what LMS are you using? I am using
    Integrity ELearning's WBT Manager and have had no problems using
    the the Captivated Quiz generated files almost as is. (I do have to
    add some cross-domain scripting, but that's another story.)
    I have experienced some rather odd results if I am not
    careful when I create a SCORM quiz. It is important to have the
    Quiz Manager settings just-so to have logical quiz results. What I
    mean is that when I have (in the Quiz Manager -> Reporting)
    Report Pass/Fail selected I need to have the proper Quiz Pass/Fail
    settings selected and have the questions weighted properly
    otherwise a user might get all the answers on a quiz correct, but
    not pass is. This also relates to settings in the Manifest setting
    for SCO -> Mastery Score.
    You might try adjusting these settings to see how your LMS
    handles them.
    Good luck,
    TPK

  • Discoverer report not visible

    Hello,
    i logged into discoverer plus using Sysadmin user but still i couldn't see some reports whose owner is some other user. How to see all the reports available in Discoverer Plus? Using which user and responsibility should i login for that?
    Your help is greatly appreciated.
    Thanks
    --Kumar                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    Hi Rod,
    Like always, thanks for your help but here a consultant has created some discoverer reports last year using the login details of our users. Now he is not here anymore and if we want to change something in the report, we have to request the user to grant access of the report to SYSADMIN or our username which is really a frustrating. I'm surprised why we don't have any super user to have access to all the reports....
    Thanks
    --KK                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • MS Word report not visible in executable

    We are using LV 7.1 FDS (with app builder) on Win2000 prof. We have Report Generation Toolkit and Database Connectivity Toolkit installed (among others). Our VI publishes reports in MS Word. When the user clicks the "report" button, the VI generates the report and this is available to the user on screen. No file is saved and the user has the choice to save the report with any name.
    The report function works fine in VI state.
    But, when we make an EXE of the VI the behaviour of reporting changes. Now, pressing the "report" button triggers harddisk activity but nothing comes-up on the screen. There is no report to be seen on either the screen or the taskbar!! In the VI, the taskbar shows a word document and the report is accessible when the user clicks on this.
    The amount of disk activity is similar to the case when we were generating reports in our VI.
    The EXE is being tested on the same machine as the VI.
    We have tested on 3 machines (with Office 200 and Office XP) but the problem remains.
    What could be going wrong?
    An early answer would be appreciated.
    Thanks,
    Gurdas
    Gurdas Singh
    PhD. Candidate | Civil Engineering | NCSU.edu

    Bill and Kileen,
    Thanks both. That is just what was needed. I tested and it works fine now.
    The same is also mentioned in the User Guide / Release Notes that accompanied the toolkit.
    I happened to collect some other webpages and .pdf that talk of other issues. In case someone happens to need this (.zip file would be less than 1 MB), please feel free to write at [email protected]
    Best regards,
    Gurdas
    Gurdas Singh
    PhD. Candidate | Civil Engineering | NCSU.edu

  • Crystal Report not visible when using IE9

    Hello,
    I have a report that has been displaying fine in IE8 for me, but when I upgraded to IE9, the report stopped displaying.  This problem seems to only occur if the report has more than 5 columns of data in it.   If it has 5 or less columns, everything displays correctly.  If it has 6 or more columns, a blank page loads.  I've noticed that if I try to print the blank page,  it will print correctly(all columns will display).
    So far, the only solution I've found is by going into compatibility mode in my IE9.    Is there a way to fix this so that compatibiltiy mode is not required to view the report in IE9?  This report is going to be used by client's and I have no way of stopping them from upgrading their browser.
    Also, I have read that Crystal Reports does not support IE9.  Does anybody know when they will support it?
    I'm using Crystal Reports version 14.0.2.364 RTM to create the report.
    The version of Crystal Reports on my aspx page is  13.0.2000.0
    Thank You.

    Bug description and suggested workarounds have been posted in this thread:
    Fix for CR for VS2010 visual effects bug: faded or blank report under IE9
    04/17/2012 Update:
    It has been verified that the bug fix has been applied to Service Pack 3.

Maybe you are looking for