Post OSD deployment advertisment status report not show succeeded. Report show "Will Not Rerun"
Hi,
When deploying image with SCCM 2007 OSD and deployment finish successfully, in report "Status summary of a specific
task sequence advertisement" status for deployed machine is not successfully but show "Will Not Rerun"
I have hundred of machines to deploy and i must click on every machine in report to verify if task was finish successfully.
Please help
Thanks
hrvoje
One more thing. If I remove machine from collection immediately after task start on this machine, status in report show successfully after task was finished. And in console there is no obsolete record for this machine. ?!?!
hrvoje
Similar Messages
-
Post OSD deployment advertisment status / reporting
Hello,
My OSD deployments migrating from xp to win 7 are going well and during the deployments I monitor the report "Status summary of a specific task sequence advertisement"
to get a feel how the deployments are going.
The issue I'm having is that post install(next morning) the same report does not show any record of the computers even running the advertisements and the homepage summarization
does not show the advertisement either.
How can I get a status report the following morning? I know I can use the report "History - Specific task sequence advertisements run on a specific computer" but this
is just for a specific computer and it doesn't give the same task sequence detail I've seen during the deployment but
wanted to target a collection? There are some minor tasks wihtin the task sequence that have failed in the past so i marked them continue on error in hopes of monitoring the details status report in morning.I am also interested in an update on this....
This is happening on a wide-scale OSD but here are the reports and logs from one specific machine:
Report Name: History - Specific task sequence advertisements run on a specific computer
Execution Time Last Step Last Action Last Group Last Status Message ID Last Status Message Name Exit Code Action Output
5/19/2011 11:32:12 AM 10002 Program received 0
5/19/2011 12:46:18 PM 10005 Program started 0
5/19/2011 2:59:38 PM 10005 Program started 0
5/19/2011 4:08:00 PM 10002 Program received 0
Report Name:
All system resources for a specific task sequence advertisement in a specific state
TestPC 10002 Program received 5/19/2011 4:08:00 PM P01 C0120330 149521
Report Name: Status for a specific computer of a task sequence advertisement available to unknown computers
AND Report Name: Specific task sequence advertisements run on a specific computer
The TestPC shows "accepted status" at 5/19/2011 4:08:00 PM but drilling down to it:
Last Entry for specific TestPC is: 5/19/2011 3:57:45 PM 11143 The task sequence execution engine successfully completed a task sequence 0
Here is the reference of the OSD TS completing in the SMSTS logs. There is nothing afterwards in the log:
Process completed with exit code 0 TSMBootstrap 5/19/2011 3:57:45 PM 2304 (0x0900)
Exiting with return code 0x00000000 TSMBootstrap 5/19/2011 3:57:45 PM 2304 (0x0900)
Process completed with exit code 0 OSDSetupHook 5/19/2011 3:57:45 PM 944 (0x03B0)
Task sequence completed 0x00000000 OSDSetupHook 5/19/2011 3:57:45 PM 944 (0x03B0)
Terminating system message loop. OSDSetupHook 5/19/2011 3:57:45 PM 2296 (0x08F8)
Restoring original desktop wallpaper. OSDSetupHook 5/19/2011 3:57:45 PM 944 (0x03B0)
::SystemParametersInfoW( 0x0014, 0, (LPVOID)m_sOriginalWallpaper.c_str(), 0 ), HRESULT=80070002 (e:\nts_sms_fre\sms\client\osdeployment\osdgina\wallpaperselector.cpp,161) OSDSetupHook 5/19/2011 3:57:45 PM 944 (0x03B0)
Exiting SetClientProvisioningMode 0x00000000 OSDSetupHook 5/19/2011 3:58:17 PM 944 (0x03B0)
Uninstalling Setup Hook OSDSetupHook 5/19/2011 3:58:17 PM 944 (0x03B0)
Removing setup hook from registry. OSDSetupHook 5/19/2011 3:58:17 PM 944 (0x03B0)
Successfully removed C:\WINDOWS\system32\OSDGINA.DLL OSDSetupHook 5/19/2011 3:58:17 PM 944 (0x03B0)
Could not delete the file C:\WINDOWS\system32\OSDSETUPHOOK.EXE. Error code 5 OSDSetupHook 5/19/2011 3:58:17 PM 944 (0x03B0)
Marking the file C:\WINDOWS\system32\OSDSETUPHOOK.EXE for deletion on Reboot OSDSetupHook 5/19/2011 3:58:17 PM 944 (0x03B0)
Successfully removed C:\WINDOWS\system32\OSDSETUPHOOK.EXE OSDSetupHook 5/19/2011 3:58:17 PM 944 (0x03B0)
Successfully removed C:\WINDOWS\system32\_SMSOSDSetup OSDSetupHook 5/19/2011 3:58:17 PM 944 (0x03B0)
Finalizing logging from process 940 OSDSetupHook 5/19/2011 3:58:17 PM 944 (0x03B0)
Successfully finalized logs to SMS client log directory from C:\WINDOWS\SysWOW64\CCM\Logs OSDSetupHook 5/19/2011 3:58:17 PM 944 (0x03B0)
Cleaning up task sequencing logging configuration. OSDSetupHook 5/19/2011 3:58:17 PM 944 (0x03B0)
Andrew -
Software Deployment - the status is not correct
Hello everyone,
My company is running SCCM to manage clients and deploy software. I found that almost computers got installed successfully but report and deployment status show not correct information. This is quite weird. Please take a look at screenshot.
Anybody has idea on it?
Le Nhut Minh PwC Vietname Limited.Hi,
Please check software distribution logs to find some useful information.
http://technet.microsoft.com/en-us/library/hh427342.aspx#BKMK_AppManageLog
If the status forward successfully, MP_Status.log also need to be examined.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Remote Support Platform System Status Report
RSP has been installed and the System status report run. I have checked the RSp documentation, Wiki and Blog, but am unable to determine how to action and improve the results.
Key results of the report are indicated below:
Database Information rating - poor.
This is determined by : Depends on ratings in Database Version, SBO-COMMON transaction log size, Company Database Setting - Model, Company Database Setting - Grow Rating and Company Database Backup Statistic.
Hardware Information u2013 acceptable.
This is determined by :Depends on rating in Disk Space Statistic Acceptable.
Can you please advise how these results can be investigated further, and improved?
Regards,
LisaHi Lisa,
If you scroll a bit more down within the System Status Report you will find just below the Database Information rating the rating for
Database Version
-Poor rating: If DB server has any other version than specified in "Green" column
-Acceptable: Never (this rating you should never get)
-Excellent: If DB version is one of the following: 8.00.760 8.00.2039 9.00.1399 9.00.2047 9.00.* 10.00.['' means any number]
Please note the Db version you can get easily by running the following query within SQL Management Studio
SELECT @@VERSION
SBO-COMMON transaction log size
-Poor rating: If size of SBO-Common DB log file is bigger than 1000M
-Acceptable: If size of SBO-Common DB is between 250M and 1000M
-Excellent:If size of SBO-Common DB is smaller than 250M
Note: Shrinking the DB might improve the results. Another solution could be while patching the whole system: 1.Backing up
the DB, delete it and carry out the upgrade as usual. It will create a new SBO-Common
Please get the ratings for
Company Database Setting - Model
Company Database Setting - Grow Rating
Company Database Backup Statistic
Disk Space Statistic
from the attached example of a System Status Report.
In case something is not clear enough explained, we are looking for feedback in order to make the System Status Report more userfriendly.
Kind regards
Mario
Edited by: Mario Schoenberg on Feb 24, 2010 7:42 AM
Attachment renamed -
Force a Task Sequence to Re-Run with advertisement set to not Re-Run
Hi there,
Is it possible to force a task sequence to re-run when the advertisement is set to not re-run? Even when deleting the advertisement and recreating a new advertisement (which forces a new ID creation), somewhere in the workstation (be it WMI and/or registry)
it knows that the task sequence (due to the same Package ID) has already run.
This guide is partially handy
http://blogs.msdn.com/b/steverac/archive/2009/11/06/sccm-forcing-a-task-sequence-to-rerun.aspx
However, he does not mention how to do so with the advertisement set to not rerun - only 'always rerun program'
Thanks, AmielHi
You can re-run TS by following 3 ways
If you have installed Configuration Manager ToolKit then there is an option called "SCCM ConfigMgr Tools" by right clicking on a collection which would give you an option "ReRun Advertisements". Through this, you can re-run TS.
I have the toolkit installed however the Program rerun behavior is set to Never rerun advertised program, so when I choose
'rerun advertisement' through SCCM I receive 'Unable to set RerunBehaviour. Program will not rerun'.
So back to my original question, if the Program rerun behaviour is set to 'Never rerun advertised program' NOT 'Always rerun program' (as explained in the link I provided) - is it at all possible to Force a rerun through WMI or registry?
*Update - this is not a PXE Task Sequence either. -
Enforcement states for a deployment report status is not refresh..
Enforcement states for a deployment report status is not refresh.
We have deployed patches by software update and monitoring status by checking report
Enforcement states for a deployment. We have observed status difference in report and in actual PC. Status of One PC is
Downloaded update in report but actually that patch was
installed on PC.
why this difference and what is the solution to solve this.Hi Garth - I don't recreate the SU group. I recreate the deployment from
the SU group.
The SU Group contains all deployed updates and the deployment is a "catch-up" and targets a collection of all clients on the particular platform ie. Server 2008 R2. It's a mandatory deployment and I've set it to report "all messages" as opposed to the default
"success and failure".
There's no particular SU that are showing ESU. It's the client that shows ESU via the report "Enforcement States for a Deploymennt", and it's only ever the clients that were "Pending System Restart" previously that change to "Enforcement State
Unknown". The software centre on these clients all know they're pending restart, and if the pending restart is performed on the client it will then change to "Compliant", but it never changes from ESU while its real state is "Pending Restart".
Hopefully that clarifies the scenario.
Like I said, I have a workaround, but I'd like to eliminate this behaviour on all my SCCM 2012 instances which are all affected. -
Windows 7 SP1 client shows status of "Not Applicable" for every single update
Windows 7 SP1 client
Every update, including all Critical Updates for Windows 7, show a status of "Not Applicable" when running a "Computer Detailed Status Report"
The computer is current in updating its status with the WSUS server.
I am hoping that you can suggest reasons why this would be.
Thanks!
mkIt is only the one computer that has all of its updates listed as 'Not Applicable'
Some of these are the same updates that other computers show as 'Installed'
Any other ideas?
Yep!
Every update, including all Critical Updates for Windows 7, show a status of "Not Applicable" when running a "Computer Detailed Status Report"
The computer is current in updating its status with the WSUS server.
One of those two statements is not true.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Recovery Point Status Report Shows Only One Day
Hello. Our Recovery Point Status Report showed us the last five days until about a month ago and now it only shows us one day. Just happened over a week-end when there was nothing changed on the server. We appear to have recovery points that go back
a week and the recovery point status is set to a month. We are running System Center 2012 R2 DPM.
Any help is appreciated, thank you for your time.
gHi,
Check your status report granularity settings for each protection group and make sure it's set for 1 day instead of weekly.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights. -
I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control. I have set the ReportPath and ReportServerUrl correctly. I am
getting an error message.
Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account?
I am getting the following error message:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.Hi bucaroov,
The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
Please follow these steps to solve the issue:
Logon the Report Server machine.
Open the Reporting Services Configuration Manager.
Copy the Report Server URL from 'Web Services URL'.
Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
not available, could you please post the error message.
Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
For more information, please see:
Walkthrough: Using the ReportViewer Control in Remote Mode:
http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT -
Function keys status is not showing on screen
Hi... please help me. I m havin lenova ideapad s10-2 netbook. In this when i press fn + function keys action is performing but its status is not displaying on screen. So if i want to switch on WLAN when i press fn+F5 screen is not showing. Also usb devices are not detecting my laptop. Please help me out.......
Thanks
Solved!
Go to Solution.shiva2shetty wrote:
Thanks 4 information. I will try it. Also QS (Quick start) and "one key recovery" is not working when OS is loaded. I need to open from start menu. After that only QS and Function key status display are working. So can you tell me how to load these twodefault when OS boots.
Thanks
Hi for Qucikstart ... if there is still installed .. you could activate in in two ways... Start Computer press immidiate F2 for BIOS in move with arrow keys to CONFIG Page there you could found Quickstart set to enable... leave with press F10 save and exit...
or in windows XP start control panel you found QUICKSTART Configuration Tool click on this program you could activate at startup save and exit...
Or if Quickstart is not installed .. download from here S10-2 Driver Site
there you can also found OKR
sincerely KalvinKlein
by the way ... did you re-install the system ? which OS did you use? , you didnt say that in your first post ... that sounds to me that you try to re-install or use an old XP without SP3 ....
To fulfill your quest here is the driver page... for all ... pick your S10-2 OS drivers and install at first the chipset driver...
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1 -
Approved shopping carts not displayed in shopping cart status report
Hi Gurus
we are facing an issue in shopping cart status report. When the approver selects 'Approved by me' in shopping carts status report system is not showing any list. There are number shopping carts approved by the user . Other selection like selection period, status , completed indicator were selected properly. But if the approver selects 'Rejected by me' the system is showing all the shopping carts approved, rejected, and awaiting approval related to the approver.
This is happning with one user only. We had checked user authorization and parameters and every thing is fine . Aslo compared the same with other users for whom this report is working fine . We are in SRM 5.5 extended caassic senario.
Any suggestions/solutions on this
VB SASIn olden days of SRM , we forcily assign account assignment for PR which do not have accounting data in the PR to create a successful SC in SRM and remove the account assignment while creating a PO in the backend.
but since your in SRM 7.0
and also you made ensure that your PR has account assignment but it is not sitting in the cockpit.
and your shopping card trying to create a PO and failed right?
since it has incomplete data , how PO is creating. How system can create a PO without vendor.
escalate to SAP bvia OSS message
BR
Muthu -
Status Report with Last Logged on User on a deployment
Hi all,
I have been trying to find a report that will telling me the deployment status of an application and against the workstations the last logged on user.
Is there such a report or will I have to customize a report to do that?
CheersHello,
a report that will telling me the deployment status of an application
You can refer to compliance report.
For last logged on user, you can find the information in client propertities. If you want to query the information, you need create a customized report.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
CProjects Status report not visible
Hi
I am trying to disply the project status report but unable to do so.
When I click on Preview butttonto display status report, new screen opens with Save, Save and Send and cancel button but could not see report there.
Is there anything missing with JAVA applate setting?
Working on ECC6 server.
Thanks and Regards,
Niraj SikligarHi Niraj,
Run the following reports in Transaction SE38
1. FP_PDF_TEST_00
specify connection as ADS
This should return certain version information. If this is succesfull go for the next one.
2. FP_TEST_IA_01
Keep everything on the selection screen as it is and execute.
Note: If you get an error that says: "Cannot find PDL type for output device LOCL",
Open the report in SE38 in display mode.
Navigate to the source code:
* Set output parameters and open spool job
fp_outputparams-preview = 'X'. " do not launch print preview
fp_outputparams-nodialog = 'X'. " suppress print dialog
fp_outputparams-connection = p_conn.
Place a session break-point on
fp_outputparams-connection = p_conn.
and then execute the report (F8).
When it stops at the break-point, double click on fp_outputparams-nodialog and remove the X on it.
(you may take help from a technical guy here)
Continue by pressing F8.
A print pop-up will appear, change output device from LOCL to PDF1 and continue (F8).
Check wether a form is displyed or not.
Regards,
Reema. -
CProjects Project status report not generated
Hi
I am facing problem of getting Project status report for a project in cProjects 4.0
I am at client side and accessing the IDES ECC6.Her I am trying for getting Project status report for the project created.
The error I am getting is :
"WebDynpro Exception: ADS: Request start time: Thu Aug 21 16:53:27 GMT+03:00 2008(200,101). "
In customizing for cProjects I have used the std. form available for the same, activated the same for the project type and when tried to get the report I got the above mentioned error.
Then in se38 I executed the programme FP_TEST_IA_01 the result was :
ADS: Request start time: Thu Aug 21 17:23:42 GMT+03:00 2008(200,101)
Also I have activated the following services
SICF->Services->default_host->sap->bc->fp and fpads, both are active.
But still I am not getting project status report from cProjects.
Please guide me what else should I do to get the project status report?
Thanks and Regards,
Niraj SikligarHi Reema,
Its great to hear from you.
I have run the report : FP_PDF_TEST_00
Out put is :
Version Information: 705.20060620101936.310918
What does that mean ?
Secondly,
I have checked RFC destination for ADS the results were as shown below:
On Technical Settings tab page :
target host: ides
Path prefix: /AdobeDocumentServices/Config?style=rpc
Is this OK?
Is there anything else to be done?
Regards,
Niraj Sikligar -
Has anyone tried to pair the Tzumi bluetooth headphones to their iMac? My iMac will detect the device, connect to it for about 2 seconds, then shows a status of "not connected". Multiple attempts get the same result.
Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.
Maybe you are looking for
-
How to import DVD-R movie into Keynote?
I just transferred a video (with audio) from a VHS tape to a DVD-R, using a stand-alone DVD Recorder. Now I need to import this into Keynote. I've tried opening/playing the DVD with iMovie iDVD, and Quicktime but they will not recognize it as a reada
-
Audio/Video not in sync when exported!
So after exporting a 1.5 hour movie to QuickTime, I played it back and found that the audio and video on a couple of chapters are completely off. I then checked the sequence on FCP but it's perfectly synced. What's going on here? I put Setting as Cur
-
How do I reset the settings on iPhoto so that it forgets I wanted to use iCloud with iPhoto ?
-
Basic query (in internationalization)
I am new to internationalization I dont know how to run this file. i compiled this. I have a basic code taken from sun site. import java.util.*; public class I18NSample { static public void main(String[] args) { String language; String country; if (a
-
How to display leading zeros in a report
Hi folks, I am doing a HR report and the users are very much used to seeing a two digit numeric value as the pay scale since their legacy days. In BW, I have the Pay Scale defined as a character (2) and it shows the values on the report as follows: P