CPU high system usage
My laptop regularly slows way down and gets super choppy, and the Activity Monitor shows high system percentage during, usually up into the 70s. This happens when I try to watch videos online, play games, or even load too many pages at once. I have to close the tab or quit the application to get it going again. This occurs with all applications (Word, Excel, games, etc). Even after I install updates and restart I get the same problem. I've tried eliminating tabs and applications up at once, tried clearing space and uninstalling applications - same issue.
The kernel is using excessive processor cycles. Below are some possible causes for the condition.
Throttling
When it gets high temperature readings from the hardware, or a low-voltage reading from the battery, the kernel may try to compensate by interrupting the processor(s) to slow them down and reduce power consumption. This condition can be due to
a buildup of dust on the logic board
high ambient temperature
a worn-out or faulty battery in a portable
the malfunction of a cooling fan, a temperature sensor, or a voltage sensor
Note that if the problem is caused by a sensor, there may be no actual overheating or undervoltage.
If the computer is portable, test with and without the AC adapter connected. If kernel_task hogs the processor only on battery power, the fault is in the battery or the logic board. If it happens only on AC power, charging is causing the machine to heat up. That may be normal on some models. CPU usage should drop when charging is complete.
Apple Diagnostics or the Apple Hardware Test, though not very reliable, is sometimes able to detect a bad fan or sensor.
If nothing is wrong with the hardware, then whatever you can do to improve cooling may help.
Installed software
User-installed software that includes a device driver or other kernel code may thrash the kernel. That category includes virtualization software, such as Parallels and VMware, as well as most commercial "anti-virus" products. Some system-monitoring applications, such as "iStat," can also contribute to the problem. You can test for this possibility by completely disabling or removing the software according to the developer's instructions, or starting in safe mode. Note, however, that disabling a system modification without removing it or testing in safe mode may not be as easy as you think.
Corrupt NVRAM or SMC data
Sometimes the problem is cleared up by resetting the NVRAM or the SMC.
External display
Connecting an external LCD display to some MacBook Pro models may cause this issue. If applicable, test by disconnecting the display. You might get better results with a newer LED display.
Similar Messages
-
High system(kernel) usage all the time! but windows runs normal
My 2013 MBA has a very high system usage all the time, and its very slow, and fan starts working at high speed at startup..
I did a clean install of both Mavericks and Mountain lion, and still got the same problem..
Also I'm using boot camp (windows 8.1) and it runs normal!!! I'm only having this trouble using OSX
Note: I had a liquid spill on it.Please post the EtreCheck output
<https://discussions.apple.com/docs/DOC-6174>
You might also want to run Applications -> Utilities -> Activity Monitor and see if there is a process or processes that are running with high CPU loads.
The fans generally run fast and loud when the CPU is generating a lot of heat, and that generally only happens when apps are pushing the CPU to high percentages.
You could also look in the Applications -> Utilities -> Console for log entries that are frequently repeating, which might indicate a process that keeps failing and restarting again and again and ... -
I have a brand new macbook pro, had it about 3 wks so I'm frustrated to be having problems already. My CPU system usage stays around 89%, but my user is like 3%. Haven't downloaded any big apps or anything onto it. Imported my itunes library, not a huge one. Anyway I'm frustrated and annoyed because my computer is running very slow and it's stupid.
Yeah, I know what you're talking about, but there's nothing there that is using 89%. Right now I have 2 apps running. Activity monitor, Safari. Activity monitor is showing 3.2%, Safari 1.3%. The rest of the stuff is either 0 or 0.01.
Here's a list of the other things listed (which are running at 0.00-0.01%)
WebKitPluginAgent
UserEventAgent
SystemUIServer
pboard
mdworker
loginwindow
launchd
iTunesHelper
fontd
Dock
AppleSpell.service
AirPort Base Station Agent -
Only one CPU core high sys usage when create database instance via dbca
when using dbca to create database instance
JUST ONLY ONE CPU core high sys usage
how to troubleshoot it
see this:
top - 09:28:19 up 55 days, 20:38, 10 users, load average: 1.00, 1.08, 1.31
Tasks: 1231 total, 2 running, 1228 sleeping, 0 stopped, 1 zombie
Cpu(s): 0.0%us, 1.3%sy, 0.0%ni, 98.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 57588328k total, 55028620k used, 2559708k free, 196852k buffers
Swap: 16386292k total, 23156k used, 16363136k free, 23011232k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
11343 oracle 25 0 1771m 30m 23m R 99.7 0.1 5:36.39 oracle
3692 oracle 16 0 13948 2348 816 S 1.6 0.0 17:00.94 top
11432 root 15 0 13540 2024 820 R 1.3 0.0 0:00.21 top
11034 oracle 16 0 737m 171m 33m S 0.3 0.3 0:52.39 java
11435 oracle 15 0 66056 1596 1180 S 0.3 0.0 0:00.01 bash
1 root 15 0 784 172 160 S 0.0 0.0 38:56.76 init
2 root RT -5 0 0 0 S 0.0 0.0 0:00.58 migration/0
3 root 34 19 0 0 0 S 0.0 0.0 0:00.75 ksoftirqd/0
4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0
5 root RT -5 0 0 0 S 0.0 0.0 0:00.81 migration/1
6 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/1
7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1
8 root RT -5 0 0 0 S 0.0 0.0 0:02.53 migration/2 mpstat info
[root@localhost ~]# mpstat -P ALL 2
Linux 2.6.18-164.el5 (localhost.localdomain) 09/12/12
09:29:09 CPU %user %nice %sys %iowait %irq %soft %steal %idle intr/s
09:29:11 all 0.01 0.00 1.27 0.01 0.00 0.01 0.00 98.69 1658.29
09:29:11 0 0.50 0.00 0.00 0.00 0.00 0.50 0.00 98.99 1657.29
09:29:11 73 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:11 74 0.00 0.00 100.00 0.00 0.00 0.00 0.00 0.00 0.00
09:29:11 75 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:11 76 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:11 77 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:11 78 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:11 79 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:11 CPU %user %nice %sys %iowait %irq %soft %steal %idle intr/s
09:29:13 all 0.01 0.00 1.26 0.01 0.00 0.02 0.00 98.70 1761.19
09:29:13 0 0.50 0.00 0.50 1.00 0.00 1.99 0.00 96.02 1761.19
09:29:13 71 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:13 72 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:13 73 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:13 74 0.00 0.00 100.00 0.00 0.00 0.00 0.00 0.00 0.00
09:29:13 75 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:13 76 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:13 77 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:13 78 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:13 79 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00 you can see there is only one CPU CORE (core 74 but is random , other core have same status but just one CPU core)
[root@localhost ~]# vmstat -S m 2
procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------
r b swpd free buff cache si so bi bo in cs us sy id wa st
3 0 23 1861 203 24267 0 0 8 12 0 0 0 0 99 0 0
4 0 23 1845 203 24262 0 0 602 16460 3682 8121 2 2 96 1 0
3 0 23 1842 203 24276 0 0 692 7520 3297 6610 2 2 97 0 0
3 0 23 1830 203 24277 0 0 786 3040 3302 7118 2 2 97 0 0
4 0 23 1829 203 24277 0 0 126 3144 3247 7343 2 1 97 0 0
3 0 23 1827 203 24279 0 0 76 2944 3292 7502 2 2 96 0 0
3 0 23 1823 203 24281 0 0 0 3248 3164 7656 2 1 97 0 0
2 0 23 1827 203 24279 0 0 0 3646 3080 7480 2 1 97 0 0
2 0 23 1828 203 24279 0 0 0 476 2942 5648 1 1 98 0 0
3 0 23 1824 203 24281 0 0 2 7476 3377 8111 2 2 97 0 0iostat infor
avg-cpu: %user %nice %system %iowait %steal %idle
1.28 0.00 1.29 0.00 0.00 97.43
Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn
hda 0.00 0.00 0.00 0 0
sda 5.47 0.00 83.58 0 168
sda1 0.00 0.00 0.00 0 0
sda2 5.47 0.00 83.58 0 168
sda3 0.00 0.00 0.00 0 0
sda4 0.00 0.00 0.00 0 0
sda5 0.00 0.00 0.00 0 0
sdb 8.96 0.00 123.38 0 248
sdb1 8.96 0.00 123.38 0 248
avg-cpu: %user %nice %system %iowait %steal %idle
1.27 0.00 1.27 0.00 0.00 97.46
Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn
hda 0.00 0.00 0.00 0 0
sda 0.00 0.00 0.00 0 0
sda1 0.00 0.00 0.00 0 0
sda2 0.00 0.00 0.00 0 0
sda3 0.00 0.00 0.00 0 0
sda4 0.00 0.00 0.00 0 0
sda5 0.00 0.00 0.00 0 0
sdb 17.50 0.00 236.00 0 472
sdb1 17.50 0.00 236.00 0 472
avg-cpu: %user %nice %system %iowait %steal %idle
1.29 0.00 1.30 0.01 0.00 97.41
Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn
hda 0.00 0.00 0.00 0 0
sda 0.50 0.00 16.00 0 32
sda1 0.00 0.00 0.00 0 0
sda2 0.50 0.00 16.00 0 32
sda3 0.00 0.00 0.00 0 0
sda4 0.00 0.00 0.00 0 0
sda5 0.00 0.00 0.00 0 0
sdb 7.50 0.00 144.00 0 288
sdb1 7.50 0.00 144.00 0 288more detail:
database version 11.2.0.2.0
system version
[root@localhost ~]# cat /etc/issue
Red Hat Enterprise Linux Server release 5.4 (Tikanga)
Kernel \r on an \m
[root@localhost ~]# lsb_release
LSB Version: :core-3.1-amd64:core-3.1-ia32:core-3.1-noarch:graphics-3.1-amd64:graphics-3.1-ia32:graphics-3.1-noarch
[root@localhost ~]# uname -a
Linux localhost.localdomain 2.6.18-164.el5 #1 SMP Tue Aug 18 15:51:48 EDT 2009 x86_64 x86_64 x86_64 GNU/Linuxhardware info
vendor_id : GenuineIntel
cpu family : 6
model : 47
model name : Intel(R) Xeon(R) CPU E7- 4860 @ 2.27GHz
stepping : 2
cpu MHz : 2261.057
cache size : 24576 KB
physical id : 3
siblings : 20
core id : 18
cpu cores : 10
apicid : 229
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx pdpe1gb rdtscp lm constant_tsc ida nonstop_tsc pni monitor ds_cpl vmx smx est tm2 cx16 xtpr popcnt lahf_lm
bogomips : 4522.11
clflush size : 64
cache_alignment : 64
address sizes : 44 bits physical, 48 bits virtual
[root@localhost ~]# free -m
total used free shared buffers cached
Mem: 56238 55892 346 0 196 23645
-/+ buffers/cache: 32050 24188
Swap: 16002 22 15979
[root@localhost ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 19G 4.9G 14G 27% /
/dev/sda5 230G 27G 192G 12% /home
/dev/sda1 99M 12M 83M 13% /boot
/dev/sdb1 2.9T 2.3T 464G 84% /arrayEdited by: JOhnLiu on Sep 11, 2012 7:31 PMJOhnLiu wrote:
thanks for reply sb92075
[root@localhost ~]# mpstat -P ALL 2
Linux 2.6.18-164.el5 (localhost.localdomain) 09/12/12
09:29:09 CPU %user %nice %sys %iowait %irq %soft %steal %idle intr/s
09:29:11 all 0.01 0.00 1.27 0.01 0.00 0.01 0.00 98.69 1658.29
09:29:11 0 0.50 0.00 0.00 0.00 0.00 0.50 0.00 98.99 1657.29
09:29:11 73 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:11 74 0.00 0.00 100.00 0.00 0.00 0.00 0.00 0.00 0.00
09:29:11 75 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:11 76 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00I think you don't understand what i mean .
there just have ONLY ONE CORE %sys 100
the top command show average of all cpu core sys% usage
when the one core sys% is 100%
the system are very slow .
e.g: when I create a database instance used for a long time . over 2 hours
but generally it will be done at most 1 hours or shorteris any type of OS virtualization involved in this environment? -
Extremely high system CPU load on my new 2012 Macbook Pro
I just brought my brand new 2012 Macbook Pro (non-retina) home from the store and noticed that it was running INCREDIBLY slow. I opened up the activity monitor and found that the system's CPU load is consistently around 70%-90%. I haven't installed any software outside of google chrome, although the issue was happening even before I installed google chrome.
Here are screenshots of my macbook's specs
Here's a screenshot of the processes sorted by %CPU
Here's a screenshot of the processes sorted by CPU Time
Any idea what would cause such a high system CPU load? Again I haven't installed any software outside of google chrome, and I don't have anything hooked up to my Macbook. This issue happens when my Macbook is both plugged and unplugged and I haven't noticed any overheating or extensive fan use.harkiamsuperman,
your first image shows Chrome using over half of the CPU time. Note that Chrome on Mavericks is more CPU-intensive than other browsers, since Google does not provide a 64-bit version of the app for OS X.
Since you’ve just brought your MacBook Pro home, perhaps Spotlight is doing its initial indexing of your internal disk; that could be one possible explanation. If that is the cause, then your CPU usage should settle down after it finishes.
If you’d like to try something simple and immediate, you could reset your MacBook Pro’s System Management Controller, to see if that makes a difference. -
Macbook Pro CPU system usage up to 98% for no reason
Hi
I really hope someone can help me out here as I am really lost at the moment. This is my first post so I apologise in advance in case I posted in the wrong forum.
I updated my Macbook Pro (late 07 model) last week with 10.5.7 and smc 1.3 (software update not combo). My MBP has 4GB ram, all previous updates installed without any hitches and no new programs installed.
Ever since then I have been having trouble with my MBP, mainly it would get really sluggish after one hour (almost to the second, no kidding, I timed it). I use Activity Monitor and Console to see what's hogging the machine can see that the CPU system usage goes to 95%+ while no new activities/programs have been launched.
I tried many 'remedies' such as reinstalled the update using the combo download, disabled spotlight, disabled mobileme, reset smc/pram, turned off screen sharing and all to no avail.
I reside in Asia bought my MBP here and therefore don't get to call Apple and ask their technicians and the two advises I got from the dealers here are (1) I am now a proud owner of a MBP brick and (2) I might get a chance to 'resurrect' it when there's a smc 1.4 update.
Any help is appreciated.
Thanks.
It then getsYes you are right. I did not ask AM to 'Show All Processes' just 'My Processes'. After reading your post I restarted my MBP, started AM straight away, chose 'Show All Processes' and waited... Sure enough, the most likely 'culprit' is 'AgentDaemon'.
After some googling I found that it maybe related to a program called 'Network Magic' which I have been using for a year and a half and survived previous system upgrades by Apple.
I shall look for a way to safely and cleanly remove this program from my system.
Thank you very much for your help.
Cheers.
Message was edited by: lombarb -
Z10 - High CPU and Battery Usage with BBM
I recently updated my Z10 (UK and EE Carrier) to 10.2.1.3062 and every day or so I am getting very high CPU and Battery Usage with BBM running in the background.
I have never used BBM and have no active or past conversations or contacts.
This morning, it used around 60% battery in under 3 hours, with 95% of that time sat at 'idle' in my pocket.
Sometimes its after I have connected it to my car stereo (charging and streaming music via USB) on an Alpine CDA-117Ri, but I dont think thats a cause.
Some screen grabs:
[URL=http://s46.photobucket.com/user/hoopsontoast/media/IMG_20150126_095930_zpsj3haccgs.png.html][IMG]htt...
[URL=http://s46.photobucket.com/user/hoopsontoast/media/IMG_20150124_230003_zpshi2dpkfo.png.html][IMG]htt...You're not alone.
Please read this post here: http://supportforums.blackberry.com/t5/BBM-for-BlackBerry/BBM-is-draining-my-Battery/m-p/3039915#M52...
and contact BBM support as suggested to send logs. BBM Support is working to determine the cause of this.
Please post over in that thread so we can keep all related in one place.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Is there any Vi for getting the CPU and Memory usage of the Local as well as Remote System
Is there any Vi for getting the CPU and Memory usage of the Local as well as Remote System
Find the attachment(LV8.5) for local machines.
You can use shared variables to monitor the remote machine's usage.
Attachments:
Task Monitor 85.vi 25 KB -
Very high memory usage..possible memory leak? Solaris 10 8/07 x64
Hi,
I noticed yesterday that my machine was becoming increasingly slow, where once it was pretty snappy. It's a Compaq SR5250NX with 1GB of RAM. Upon checking vmstat, I noticed that the "Free" column was ~191MB. Now, the only applications I had open were FireFox 2.0.11, GAIM, and StarOffice. I closed all of them, and the number reported in the "Free" column became approximately 195MB. "Pagefile" was about 5.5x that size. There were no other applications running and it's a single user machine, so I was the only one logged in. System uptime: 9 days.
I logged out, logged back in, to see if that had an affect. It did not. Rebooted and obviously, that fixed it. Now with only FireFox, GAIM, and a terminal open, vmstat reports "Free" as ~450MB. I've noticed if I run vmstat every few seconds, the "Free" total keeps going down. Example:
unknown% vmstat
kthr memory page disk faults cpu
r b w swap free re mf pi po fr de sr cd s0 s1 s2 in sy cs us sy id
0 0 0 870888 450220 9 27 10 0 1 0 8 2 -0 -0 -0 595 1193 569 72 1 28
unknown% vmstat
kthr memory page disk faults cpu
r b w swap free re mf pi po fr de sr cd s0 s1 s2 in sy cs us sy id
0 0 0 870880 450204 9 27 10 0 1 0 8 2 -0 -0 -0 596 1193 569 72 1 28
unknown% vmstat
kthr memory page disk faults cpu
r b w swap free re mf pi po fr de sr cd s0 s1 s2 in sy cs us sy id
0 0 0 870828 450092 9 27 10 0 1 0 8 2 -0 -0 -0 596 1193 570 71 1 28
unknown%Output of prstat -u Kendall (my username ) is as follows:
PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP
2026 Kendall 124M 70M sleep 59 0 0:01:47 1.4% firefox-bin/7
1093 Kendall 85M 77M sleep 59 0 0:07:15 1.1% Xsun/1
1802 Kendall 60M 15M sleep 59 0 0:00:08 0.1% gnome-terminal/2
1301 Kendall 93M 23M sleep 49 0 0:00:30 0.1% java/14
1259 Kendall 53M 15M sleep 49 0 0:00:32 0.1% gaim/1
2133 Kendall 3312K 2740K cpu1 59 0 0:00:00 0.0% prstat/1
1276 Kendall 51M 12M sleep 59 0 0:00:11 0.0% gnome-netstatus/1
1247 Kendall 46M 10M sleep 59 0 0:00:06 0.0% metacity/1
1274 Kendall 51M 13M sleep 59 0 0:00:05 0.0% wnck-applet/1
1249 Kendall 56M 17M sleep 59 0 0:00:07 0.0% gnome-panel/1
1278 Kendall 48M 9240K sleep 59 0 0:00:05 0.0% mixer_applet2/1
1245 Kendall 9092K 3844K sleep 59 0 0:00:00 0.0% gnome-smproxy/1
1227 Kendall 8244K 4444K sleep 59 0 0:00:01 0.0% xscreensaver/1
1201 Kendall 4252K 1664K sleep 59 0 0:00:00 0.0% sdt_shell/1
1217 Kendall 55M 16M sleep 59 0 0:00:00 0.0% gnome-session/1
779 Kendall 47M 2208K sleep 59 0 0:00:00 0.0% gnome-volcheck/1
746 Kendall 5660K 3660K sleep 59 0 0:00:00 0.0% bonobo-activati/1
1270 Kendall 49M 10M sleep 49 0 0:00:00 0.0% clock-applet/1
1280 Kendall 47M 8904K sleep 59 0 0:00:00 0.0% notification-ar/1
1199 Kendall 2928K 884K sleep 59 0 0:00:00 0.0% dsdm/1
1262 Kendall 47M 2268K sleep 59 0 0:00:00 0.0% gnome-volcheck/1
Total: 37 processes, 62 lwps, load averages: 0.11, 0.98, 1.63System uptime is 9 hours, 48 minutes. I'm just wondering why the memory usage seems so high to do...nothing. It's obviously a real problem as the machine turned very slow when vmstat was showing 195MB free.
Any tips, tricks, advice, on which way to go with this?
Thanks!Apologies for the delayed reply. School has been keeping me nice and busy.
Anyway, here is the output of prstat -Z:
PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP
2040 Kendall 144M 76M sleep 59 0 0:04:26 2.0% firefox-bin/10
28809 Kendall 201M 193M sleep 59 0 0:42:30 1.9% Xsun/1
2083 Kendall 186M 89M sleep 49 0 0:02:31 1.2% java/58
2260 Kendall 59M 14M sleep 59 0 0:00:00 1.0% gnome-terminal/2
2050 Kendall 63M 21M sleep 49 0 0:01:35 0.6% realplay.bin/4
2265 Kendall 3344K 2780K cpu1 59 0 0:00:00 0.2% prstat/1
29513 Kendall 71M 33M sleep 39 0 0:07:25 0.2% gaim/1
28967 Kendall 56M 18M sleep 59 0 0:00:24 0.1% gnome-panel/1
29060 Kendall 93M 24M sleep 49 0 0:02:58 0.1% java/14
28994 Kendall 51M 13M sleep 59 0 0:00:23 0.1% wnck-applet/1
28965 Kendall 49M 14M sleep 59 0 0:00:33 0.0% metacity/1
649 noaccess 164M 46M sleep 59 0 0:09:54 0.0% java/23
28996 Kendall 51M 12M sleep 59 0 0:00:50 0.0% gnome-netstatus/1
2264 Kendall 1352K 972K sleep 59 0 0:00:00 0.0% csh/1
28963 Kendall 9100K 3792K sleep 59 0 0:00:03 0.0% gnome-smproxy/1
ZONEID NPROC SWAP RSS MEMORY TIME CPU ZONE
0 80 655M 738M 73% 1:18:40 7.7% global
Total: 80 processes, 322 lwps, load averages: 0.27, 0.27, 0.22Sorry about the bad formatting, it's copied from the terminal.
In any event, we can see that FireFox is sucking up 145MB (??!?!!? crazy...) XSun, 200MB, and java 190MB. I'm running Java Desktop System (Release 3) so I assume that is what accounts for the the high memory usage RE: java process. But, XSun, 200MB?
Is this normal and I just need to toss another gig in, or what?
Thanks -
PC with slow boot and pc speed, sudden high pc usage, delay-freeze when opening/performing something
Hi,
Before everything, two things:
1. I'm not a native english speaker so i may have some problems to speak properly/as objective as i'd like to.
2 . I'm writing in this section because i don't know the cause of my pc issues so i can't categorize them.
Now, my computer is a Toshiba satellite L755-S5244, Windows 7 Home premium 64 bits, Intel pentium CPU B940 2Ghz, 4 Gb RAM, and I'm writing this message using it.
I bought the laptop in December of 2011 and at the beggining it was working normally. Someone else used the computer these last months and he left the pc without antivirus protection; when i installed one (Avast) and start to analyze the pc it suddenly shutted down. It wasn't able to boot, so after some trys to restore/enter in safe mode I finally used the Toshiba Recovery Wizard to get the pc to the original factory settings. The process was sucessfull, so the first thing i did after finish the process was install a new antivirus (this time i used Kaspersky Pure) and the the analysis showed no threats as i expected.
However, before the recovery process i realized of some slow performance on the computer, like talking a bit too long to opening files or menus, control panel... almost anything was opening with a little delay even just after start the pc. This problem continued even after the recovery process. Also, an online game -League of legends- which was working fine when i just bought the pc, developed some issue: the screen and the audio randomly frezees for like 3-5 seconds. These problems seems to be related between each other.
But that wasn't all. After the recovery to the original factory settings, i just installed a few things:
-Kaspersky Pure 2.0, CCleaner (free), Mozila Firefox, and League of legends.
Later I also installed Microsoft Office 2010.
The antivirus showed no threats. The game kept with the freeze thing.
And 2 days ago i was playing league of legends and downloading Skype when the pc suddenly got too slow. I restarted it. After the restart it took a long time to boot, and before the windows login screen loaded there was a black screen where only the mouse was showed; the start-up was slow too, (this one showed a blue screen with the mouse too -but not BSOD-) all this took like 15-20 minutes; that never happened before so i restarted the computer again but the problem was the same: slow boot, slow desktop start-up (let's not even talk about opening something).
I went to the repair menu (f8) and try to restore the system but it didn't change anything. I checked for memory issues but there wasn't. I looked also for starting problems but the repair didn't find anything. All in there was saying: "the computer performance seems normal", but it wasn't. Like entering to windows in normal mode was talking to long, i tried the safe mode. It was also slow but not that much. When i entered, a system restore which i wasn't able to performance before in normal mode popped-up and said that the system was restored sucessfully to the first restore point -just after the factory recovery, but it apparently didn't fix the slow bot issue.
Even in safe mode the software was working slow so i decided to go for the toshiba recovery wizard again, and looked in here, the forums -and the rest of the net- for problems like mine.
This time the Toshiba Recovery Wizard took like ages to finish. 3 hours just for recovering, and like 7 more hours just installing the drivers. The boot/start-up was still slow, so i think this was the cause of the slow recovery because the wizard restarts the computer a lot.
When the factory settings recovery finished, the first boot was slow, also the start up, the programs, the start menu, the control panel, ... everything was slow the first time i opened it. If i keep using the same program, it seems normal, but randomly freezes if i select some option, of press something (like this browser, google chrome, even now when i'm writing this message or before where i was registering into the forums). As obvious, because this slow performance i'm really not comfortable using this computer.
I used the HDD SDD Alert but it says the HDD is working fine (the hard drive doesn't make weirds sounds, i almost don't hear it at all); also i did a PC Diagnostic with the PC diagnostic tool and everything passed the test. I can't think of virus/malware because i did the recovery wizard, twice. I just installed Avast again and it didn't find anything. With the task manager i noticed of a high pc usage (almost always 100%) was showing for a really short moment when/after the computer freezes.
So, i don't know how to solve this slow performance.
The last thing i did was download those speed-up softwares: SpeedUpMyPc, RegCurePro, SpeedyPC pro and Pareto logic Health Advisor. They scanned the pc for free and found like 100 system performance issues, but I'm not able to use these programms to fix the issues if i dont buy them. Also i'm not even sure if that will fix my problems.
That's why i'm here, looking for a way to identify/fix them. One last thing: all this time i've been checking the temperature of the laptop but is never hot -now is not even warm. Now i'm afraid of restarting the PC again cuz i know it will take a long time to get into a kinda stable performance like right now.
So that's all. If you read all this, have my thanks. Also, any help would be really appreciated it.
EDIT:
A new thing happened. When i try to installed league of legends, the setup told me that my hard drive may be corrupted and the file won't copy, i skip it a few times but the installation took a long of time (half hour) and the error kept ocurring. I hope this can may be a clue about what is happening to my pc.Satellite L755-S5244
If you restore the hard disk to its original out-of-the-box contents using Toshiba recovery media and still have trouble, then you know it's not due to software.
the setup told me that my hard drive may be corrupted and the file won't copy, i skip it a few times but the installation took a long of time (half hour) and the error kept ocurring.
In particular, that sort of thing occurs when a hard drive is failing. Time to call Toshiba's tech support at 1-800-457-7777 (from the US) or 1-949-859-4273 (from outside the US).
-Jerry -
Sudden high memory usage, can't find cause
I did a big update yesterday, and today I've started to notice very high memory usage. I wasn't keeping track before so I can't say how much it increased, but I've never had problems before, and the slowness and lack of responsiveness have been noticeable, though I haven't ruled out other possible causes for that. Here's the output of 'free -m':
total used free shared buffers cached
Mem: 7971 7826 144 0 1 149
-/+ buffers/cache: 7674 296
Swap: 9215 458 8757
It wasn't as bad as that right after startup, though usage still seemed suspiciously high. What makes this whole thing a mystery to me is that none of my running processes seem to be using that much memory! Here's the output of 'top -b -n 1':
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1 root 20 0 32712 544 384 S 0.0 0.0 0:01.32 systemd
2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd
3 root 20 0 0 0 0 S 0.0 0.0 0:02.48 ksoftirqd/0
5 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0H
7 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/0
8 root 20 0 0 0 0 S 0.0 0.0 0:15.55 rcu_preempt
9 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_bh
10 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_sched
11 root rt 0 0 0 0 S 0.0 0.0 0:00.05 watchdog/0
12 root rt 0 0 0 0 S 0.0 0.0 0:00.04 watchdog/1
13 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/1
14 root 20 0 0 0 0 S 0.0 0.0 0:01.02 ksoftirqd/1
16 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/1:0H
17 root rt 0 0 0 0 S 0.0 0.0 0:00.04 watchdog/2
18 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/2
19 root 20 0 0 0 0 S 0.0 0.0 0:01.17 ksoftirqd/2
20 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/2:0
21 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/2:0H
22 root rt 0 0 0 0 S 0.0 0.0 0:00.04 watchdog/3
23 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/3
24 root 20 0 0 0 0 S 0.0 0.0 0:01.04 ksoftirqd/3
26 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/3:0H
27 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 khelper
28 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kdevtmpfs
29 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 netns
30 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 writeback
31 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 bioset
32 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kblockd
33 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 xenbus_frontend
35 root 20 0 0 0 0 S 0.0 0.0 0:00.00 khungtaskd
36 root 20 0 0 0 0 S 0.0 0.0 0:06.75 kswapd0
37 root 25 5 0 0 0 S 0.0 0.0 0:00.00 ksmd
38 root 39 19 0 0 0 S 0.0 0.0 0:00.24 khugepaged
39 root 20 0 0 0 0 S 0.0 0.0 0:00.00 fsnotify_mark
40 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 crypto
44 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kthrotld
47 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 deferwq
49 root 20 0 0 0 0 S 0.0 0.0 0:00.21 kworker/1:1
61 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 ata_sff
63 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_0
65 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_1
68 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_2
69 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_3
70 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_4
71 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_5
76 root 20 0 0 0 0 S 0.0 0.0 0:00.00 khubd
81 root 20 0 0 0 0 S 0.0 0.0 0:00.02 kworker/3:2
93 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 firewire
94 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_6
95 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_7
96 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_8
97 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_9
100 root 0 -20 0 0 0 S 0.0 0.0 0:01.31 kworker/0:1H
104 root 20 0 0 0 0 S 0.0 0.0 0:00.03 jbd2/sda3-8
105 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 ext4-dio-unwrit
119 root 20 0 182720 324 228 S 0.0 0.0 0:02.90 systemd-journal
130 root 20 0 32032 320 316 S 0.0 0.0 0:00.16 systemd-udevd
133 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/1:2
150 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 rpciod
152 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 nfsiod
160 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/1:1H
162 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/3:1H
189 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 cfg80211
191 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 led_workqueue
216 root -51 0 0 0 0 S 0.0 0.0 0:00.00 irq/53-mei_me
220 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/2:1H
255 root 20 0 0 0 0 S 0.0 0.0 0:00.59 jbd2/sda2-8
256 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 ext4-dio-unwrit
267 root 20 0 13236 340 260 S 0.0 0.0 0:00.02 crond
268 root 20 0 57644 524 232 S 0.0 0.0 0:00.07 syslog-ng
275 root 20 0 77896 2164 52 S 0.0 0.0 0:00.11 cupsd
276 root 20 0 32856 32 0 S 0.0 0.0 0:00.53 atieventsd
278 root 20 0 26120 452 448 S 0.0 0.0 0:00.00 systemd-logind
280 dbus 20 0 18040 1040 484 S 0.0 0.0 0:00.16 dbus-daemon
293 root 20 0 8156 32 28 S 0.0 0.0 0:00.04 agetty
294 root 20 0 22416 304 304 S 0.0 0.0 0:00.00 kdm
311 root 20 0 32332 52 0 S 0.0 0.0 0:00.10 wpa_supplicant
314 root 20 0 4252 44 28 S 0.0 0.0 0:02.61 acpid
363 root 20 0 233544 396 396 S 0.0 0.0 0:00.12 colord
370 root 20 0 0 0 0 S 0.0 0.0 0:00.00 firegl
371 root 20 0 0 0 0 S 0.0 0.0 0:00.00 firegl
372 root 20 0 0 0 0 S 0.0 0.0 0:00.00 firegl
379 root 20 0 8612 60 16 S 0.0 0.0 0:00.00 dhcpcd
462 redac 20 0 15212 68 0 S 0.0 0.0 0:00.37 gpg-agent
465 redac 20 0 12680 4 0 S 0.0 0.0 0:00.00 ssh-agent
504 root 20 0 229584 440 284 S 0.0 0.0 0:00.03 upowerd
507 polkitd 20 0 506832 916 700 S 0.0 0.0 0:00.09 polkitd
563 root 20 0 355656 1804 1044 S 0.0 0.0 0:01.50 udisksd
628 redac 20 0 2397180 17068 2004 S 0.0 0.2 0:04.86 mysqld
796 rtkit 21 1 168664 372 360 S 0.0 0.0 0:00.34 rtkit-daemon
873 pdnsd 20 0 172532 0 0 S 0.0 0.0 0:00.00 pdnsd
874 tor 20 0 49952 20556 2152 S 0.0 0.3 0:05.89 tor
1884 root 20 0 361452 118644 105076 S 0.0 1.5 1:21.43 X
1895 root 20 0 75048 660 656 S 0.0 0.0 0:00.00 kdm
1903 redac 20 0 13736 412 408 S 0.0 0.0 0:00.01 startkde
1912 redac 20 0 18016 324 320 S 0.0 0.0 0:00.00 dbus-launch
1913 redac 20 0 19220 1604 564 S 0.0 0.0 0:00.50 dbus-daemon
1959 redac 20 0 12680 52 48 S 0.0 0.0 0:00.00 ssh-agent
1976 root 20 0 4080 40 0 S 0.0 0.0 0:00.00 start_kdeinit
1977 redac 20 0 343772 1976 1420 S 0.0 0.0 0:00.07 kdeinit4
1978 redac 20 0 348392 2680 1824 S 0.0 0.0 0:00.04 klauncher
1980 redac 20 0 1262136 5352 3596 S 0.0 0.1 0:00.48 kded4
1991 redac 20 0 430604 4032 2840 S 0.0 0.0 0:00.11 kglobalaccel
1995 redac 20 0 694524 3020 2520 S 0.0 0.0 0:00.10 kactivitymanage
2000 redac 20 0 4216 44 44 S 0.0 0.0 0:00.00 kwrapper4
2001 redac 20 0 516344 3224 2300 S 0.0 0.0 0:00.10 ksmserver
2009 redac 20 0 422056 19640 15244 S 0.0 0.2 0:23.69 compiz
2012 redac 20 0 388168 7692 4544 S 0.0 0.1 0:01.26 emerald
2023 redac 20 0 280300 2500 2160 S 0.0 0.0 0:00.06 kuiserver
2025 redac 20 0 154132 1848 1344 S 0.0 0.0 0:00.24 akonadi_control
2027 redac 20 0 1949412 1984 1592 S 0.0 0.0 0:00.33 akonadiserver
2059 redac 20 0 346680 1408 1020 S 0.0 0.0 0:00.04 kio_http_cache_
2062 redac 20 0 769220 4932 3436 S 0.0 0.1 0:01.00 krunner
2071 redac 20 0 603092 4484 3132 S 0.0 0.1 0:00.16 kmix
2073 redac 20 0 285208 2680 2352 S 0.0 0.0 0:00.04 nepomukcontroll
2074 redac 20 0 359260 3148 2864 S 0.0 0.0 0:00.25 gtk-kde4
2077 redac 20 0 309608 2468 2220 S 0.0 0.0 0:00.05 akonadi_agent_l
2078 redac 20 0 309512 2332 2140 S 0.0 0.0 0:00.04 akonadi_agent_l
2079 redac 20 0 309496 2564 2336 S 0.0 0.0 0:00.05 akonadi_agent_l
2080 redac 20 0 309608 2476 2224 S 0.0 0.0 0:00.05 akonadi_agent_l
2081 redac 20 0 549804 3236 2480 S 0.0 0.0 0:00.13 akonadi_archive
2082 redac 20 0 303140 2480 2276 S 0.0 0.0 0:00.04 akonadi_agent_l
2083 redac 20 0 305600 2516 2300 S 0.0 0.0 0:00.05 akonadi_agent_l
2084 redac 20 0 314988 4144 3156 S 0.0 0.1 0:00.12 akonadi_imap_re
2099 redac 20 0 430912 15668 9912 S 0.0 0.2 0:09.39 yakuake
2100 redac 20 0 309676 2560 2308 S 0.0 0.0 0:00.04 akonadi_agent_l
2101 redac 20 0 339400 2860 2468 S 0.0 0.0 0:00.09 akonadi_maildis
2102 redac 20 0 549820 2828 2504 S 0.0 0.0 0:00.13 akonadi_mailfil
2103 redac 20 0 314052 2924 2508 S 0.0 0.0 0:00.09 akonadi_nepomuk
2115 redac 20 0 303056 2428 2240 S 0.0 0.0 0:00.04 akonadi_agent_l
2132 redac 20 0 2011628 14200 5716 S 0.0 0.2 0:18.21 ktorrent
2158 redac 20 0 15972 836 520 S 0.0 0.0 0:00.00 bash
2161 redac 20 0 1040928 6484 3060 S 0.0 0.1 0:00.53 knotify4
2162 redac 20 0 1962616 484928 23072 S 0.0 5.9 2:06.25 firefox
2176 redac 20 0 13732 344 340 S 0.0 0.0 0:00.00 rssowl
2178 redac 20 0 11344 404 404 S 0.0 0.0 0:00.00 RSSOwl
2193 redac 20 0 374420 2764 2516 S 0.0 0.0 0:00.06 polkit-kde-auth
2195 redac 20 0 3314212 140484 13196 S 0.0 1.7 0:24.29 java
2203 redac 9 -11 308256 2424 912 S 0.0 0.0 0:00.36 pulseaudio
2209 redac 20 0 406420 3544 2720 S 0.0 0.0 0:00.08 korgac
2233 redac 20 0 69156 420 420 S 0.0 0.0 0:00.00 gconf-helper
2235 redac 20 0 45676 836 564 S 0.0 0.0 0:00.01 gconfd-2
2236 redac 20 0 438044 4468 3128 S 0.0 0.1 0:00.13 klipper
2322 redac 20 0 193052 944 740 S 0.0 0.0 0:00.00 gvfsd
2336 redac 20 0 282112 644 644 S 0.0 0.0 0:00.00 gvfsd-fuse
2361 redac 20 0 263576 572 572 S 0.0 0.0 0:00.00 at-spi-bus-laun
2436 redac 20 0 3188512 61188 19352 S 0.0 0.7 0:16.98 plasma-desktop
2441 redac 20 0 9828 784 520 S 0.0 0.0 0:01.06 ksysguardd
2832 redac 20 0 15580 1240 784 S 0.0 0.0 0:02.93 top
2867 redac 20 0 15972 1796 1160 S 0.0 0.0 0:00.03 bash
2937 root 20 0 0 0 0 S 0.0 0.0 0:00.03 kworker/2:1
2938 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/3:1
3336 root 20 0 0 0 0 S 0.0 0.0 0:00.25 kworker/u8:2
3643 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/u8:1
3662 root 20 0 0 0 0 S 0.0 0.0 0:00.03 kworker/0:1
3703 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0
3704 redac 20 0 15456 1308 992 R 0.0 0.0 0:00.00 top
32506 root 20 0 0 0 0 S 0.0 0.0 0:00.57 kworker/0:2
I wouldn't expect the '%MEM's to add up to exactly the real usage, but this isn't even close! So, what could be using up all of my memory? I have /tmp mounted to ram, but that's only a few megabytes. I really have no idea where to go from here.
The relevant portion of my pacman log is below, since I don't know how to get just a compact list of the updated packages. Most notably, the kernel was upgrades, from 3.9.9-1 to 3.10.3-1.
[2013-08-03 13:00] [PACMAN] Running 'pacman -Su'
[2013-08-03 13:00] [PACMAN] starting full system upgrade
[2013-08-03 13:38] [PACMAN] upgraded a52dec (0.7.4-6 -> 0.7.4-7)
[2013-08-03 13:38] [PACMAN] upgraded libmariadbclient (5.5.31-1 -> 5.5.32-1)
[2013-08-03 13:38] [PACMAN] upgraded mariadb-clients (5.5.31-1 -> 5.5.32-1)
[2013-08-03 13:38] [PACMAN] upgraded mariadb (5.5.31-1 -> 5.5.32-1)
[2013-08-03 13:38] [PACMAN] upgraded akonadi (1.10.0-2 -> 1.10.2-1)
[2013-08-03 13:38] [PACMAN] upgraded alsa-plugins (1.0.27-1 -> 1.0.27-2)
[2013-08-03 13:38] [PACMAN] upgraded alsa-utils (1.0.27.1-2 -> 1.0.27.2-1)
[2013-08-03 13:38] [PACMAN] upgraded x264 (20130206-1 -> 20130702-2)
[2013-08-03 13:38] [PACMAN] upgraded ffmpeg (1:1.2.1-1 -> 1:2.0-2)
[2013-08-03 13:38] [PACMAN] upgraded amarok (2.7.1-2 -> 2.7.1-3)
[2013-08-03 13:38] [PACMAN] upgraded anki (2.0.11-1 -> 2.0.12-1)
[2013-08-03 13:38] [PACMAN] upgraded apr (1.4.6-1 -> 1.4.8-1)
[2013-08-03 13:38] [PACMAN] upgraded glib2 (2.36.3-2 -> 2.36.3-3)
[2013-08-03 13:38] [ALPM] warning: /usr/lib/avahi/service-types.db installed as /usr/lib/avahi/service-types.db.pacnew
[2013-08-03 13:38] [PACMAN] upgraded avahi (0.6.31-9 -> 0.6.31-10)
[2013-08-03 13:38] [PACMAN] upgraded bison (2.7.1-1 -> 3.0-1)
[2013-08-03 13:38] [ALPM-SCRIPTLET] ---------------- I/O BUG ---------------------------------------
[2013-08-03 13:38] [ALPM-SCRIPTLET] There's a bug in fglrx found by lano1106 which generates
[2013-08-03 13:38] [ALPM-SCRIPTLET] great amount of unneeded I/O operations
[2013-08-03 13:38] [ALPM-SCRIPTLET]
[2013-08-03 13:38] [ALPM-SCRIPTLET] To activate workaround enable systemd service:
[2013-08-03 13:38] [ALPM-SCRIPTLET] systemctl enable temp-links-catalyst
[2013-08-03 13:38] [ALPM-SCRIPTLET] systemctl start temp-links-catalyst
[2013-08-03 13:38] [ALPM-SCRIPTLET]
[2013-08-03 13:38] [ALPM-SCRIPTLET] More infos:
[2013-08-03 13:38] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?pid=1279977#p1279977
[2013-08-03 13:38] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?pid=1280193#p1280193
[2013-08-03 13:38] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-08-03 13:38] [PACMAN] upgraded catalyst-utils (13.6-3 -> 13.8-1)
[2013-08-03 13:38] [ALPM-SCRIPTLET] + removing fglrx module from /usr/lib/modules/3.9.9-1-ARCH
[2013-08-03 13:38] [ALPM-SCRIPTLET] Building fglrx module for 3.9.9-1-ARCH kernel ...
[2013-08-03 13:38] [ALPM-SCRIPTLET] Ok.
[2013-08-03 13:38] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-08-03 13:38] [ALPM-SCRIPTLET] ATTENTION!
[2013-08-03 13:38] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-08-03 13:38] [ALPM-SCRIPTLET] To enable 'automatic re-compilation while system shutdown/reboot'
[2013-08-03 13:38] [ALPM-SCRIPTLET] testing feature run these commands as root:
[2013-08-03 13:38] [ALPM-SCRIPTLET] systemctl enable catalyst-hook
[2013-08-03 13:38] [ALPM-SCRIPTLET] systemctl start catalyst-hook
[2013-08-03 13:38] [ALPM-SCRIPTLET]
[2013-08-03 13:38] [ALPM-SCRIPTLET] More info here:
[2013-08-03 13:38] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?pid=1255575#p1255575
[2013-08-03 13:38] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-08-03 13:38] [PACMAN] upgraded catalyst-hook (13.6-3 -> 13.8-1)
[2013-08-03 13:38] [PACMAN] upgraded chromaprint (0.7-5 -> 0.7-6)
[2013-08-03 13:38] [PACMAN] upgraded nspr (4.9.6-1 -> 4.10-2)
[2013-08-03 13:38] [PACMAN] upgraded nss (3.14.3-3 -> 3.15.1-1)
[2013-08-03 13:38] [PACMAN] upgraded xdg-utils (1.1.0.git20121008-2 -> 1.1.0.git20130520-1)
[2013-08-03 13:38] [PACMAN] upgraded libgcrypt (1.5.2-1 -> 1.5.3-1)
[2013-08-03 13:38] [PACMAN] upgraded libpng (1.6.2-3 -> 1.6.3-1)
[2013-08-03 13:38] [PACMAN] upgraded xcb-proto (1.8-1 -> 1.8-2)
[2013-08-03 13:38] [PACMAN] upgraded libxcb (1.9.1-1 -> 1.9.1-2)
[2013-08-03 13:38] [PACMAN] upgraded libx11 (1.6.0-1 -> 1.6.1-1)
[2013-08-03 13:38] [PACMAN] upgraded giflib (4.2.1-3 -> 5.0.4-2)
[2013-08-03 13:38] [PACMAN] upgraded libwebp (0.3.1-2 -> 0.3.1-3)
[2013-08-03 13:38] [PACMAN] upgraded harfbuzz (0.9.18-1 -> 0.9.19-1)
[2013-08-03 13:38] [PACMAN] upgraded harfbuzz-icu (0.9.18-1 -> 0.9.19-1)
[2013-08-03 13:38] [PACMAN] upgraded chromium (28.0.1500.71-1 -> 28.0.1500.95-1)
[2013-08-03 13:38] [PACMAN] upgraded glew (1.9.0-2 -> 1.10.0-1)
[2013-08-03 13:38] [PACMAN] upgraded projectm (2.1.0-5 -> 2.1.0-6)
[2013-08-03 13:39] [PACMAN] upgraded clementine (1.1.1-8 -> 1.1.1-9)
[2013-08-03 13:39] [PACMAN] upgraded cln (1.3.2-1 -> 1.3.3-1)
[2013-08-03 13:39] [PACMAN] upgraded gstreamer (1.0.8-1 -> 1.0.9-1)
[2013-08-03 13:39] [PACMAN] upgraded gst-plugins-base-libs (1.0.8-1 -> 1.0.9-1)
[2013-08-03 13:39] [PACMAN] upgraded gst-plugins-bad (1.0.8-1 -> 1.0.9-1)
[2013-08-03 13:39] [PACMAN] upgraded clutter-gst (2.0.4-2 -> 2.0.6-1)
[2013-08-03 13:39] [PACMAN] upgraded colord (1.0.2-1 -> 1.0.2-2)
[2013-08-03 13:39] [PACMAN] upgraded cracklib (2.8.22-3 -> 2.9.0-1)
[2013-08-03 13:39] [PACMAN] upgraded dhcpcd (5.6.8-3 -> 6.0.4-1)
[2013-08-03 13:39] [PACMAN] upgraded dosfstools (3.0.20-1 -> 3.0.22-1)
[2013-08-03 13:39] [PACMAN] upgraded lib32-glew (1.9.0-1 -> 1.10.0-1)
[2013-08-03 13:39] [ALPM] warning: directory permissions differ on /opt/df_linux/
[2013-08-03 13:39] [PACMAN] upgraded dwarffortress (0.34.11-3 -> 0.34.11-4)
[2013-08-03 13:39] [PACMAN] upgraded jre7-openjdk-headless (7.u40_2.4.1-1 -> 7.u40_2.4.1-2)
[2013-08-03 13:39] [PACMAN] upgraded jre7-openjdk (7.u40_2.4.1-1 -> 7.u40_2.4.1-2)
[2013-08-03 13:39] [PACMAN] upgraded jdk7-openjdk (7.u40_2.4.1-1 -> 7.u40_2.4.1-2)
[2013-08-03 13:39] [PACMAN] upgraded eclipse (4.2.2-1 -> 4.3-1)
[2013-08-03 13:39] [PACMAN] upgraded emacs (24.3-2 -> 24.3-3)
[2013-08-03 13:39] [PACMAN] upgraded exempi (2.2.0-1 -> 2.2.1-1)
[2013-08-03 13:39] [PACMAN] upgraded fontforge (20120731_b-3 -> 20120731_b-6)
[2013-08-03 13:39] [PACMAN] upgraded fuse (2.9.2-3 -> 2.9.3-1)
[2013-08-03 13:39] [PACMAN] upgraded gegl (0.2.0-8 -> 0.2.0-9)
[2013-08-03 13:39] [PACMAN] upgraded git (1.8.3.3-1 -> 1.8.3.4-1)
[2013-08-03 13:39] [PACMAN] upgraded glib (1.2.10-9 -> 1.2.10-10)
[2013-08-03 13:39] [PACMAN] upgraded glib-perl (1.280-3 -> 1.301-1)
[2013-08-03 13:39] [PACMAN] upgraded glpk (4.48-1 -> 4.52-1)
[2013-08-03 13:39] [PACMAN] upgraded gnash-common (0.8.10-9 -> 0.8.10-10)
[2013-08-03 13:39] [PACMAN] upgraded ibus (1.5.2-2 -> 1.5.3-1)
[2013-08-03 13:39] [PACMAN] upgraded gnome-settings-daemon (3.8.3-2 -> 3.8.4-1)
[2013-08-03 13:39] [PACMAN] upgraded libqmi (1.4.0-1 -> 1.4.0-2)
[2013-08-03 13:39] [PACMAN] upgraded libmbim (1.2.0-1 -> 1.4.0-1)
[2013-08-03 13:39] [PACMAN] upgraded modemmanager (0.7.991-1 -> 1.0.0-1)
[2013-08-03 13:39] [PACMAN] upgraded gnome-control-center (3.8.3-1 -> 3.8.4.1-1)
[2013-08-03 13:39] [PACMAN] upgraded gnome-icon-theme (3.8.2-1 -> 3.8.3-1)
[2013-08-03 13:39] [PACMAN] upgraded gnutls (3.2.1-1 -> 3.2.3-1)
[2013-08-03 13:39] [PACMAN] upgraded gnome-vfs (2.24.4-6 -> 2.24.4-7)
[2013-08-03 13:39] [PACMAN] upgraded goffice (0.10.3-1 -> 0.10.4-1)
[2013-08-03 13:40] [PACMAN] upgraded gnumeric (1.12.3-1 -> 1.12.4-1)
[2013-08-03 13:40] [PACMAN] upgraded gst-plugins-base (1.0.8-1 -> 1.0.9-1)
[2013-08-03 13:40] [PACMAN] upgraded gst-plugins-good (1.0.8-1 -> 1.0.9-1)
[2013-08-03 13:40] [PACMAN] upgraded gstreamer0.10-ugly (0.10.19-5 -> 0.10.19-6)
[2013-08-03 13:40] [PACMAN] upgraded gstreamer0.10-ugly-plugins (0.10.19-5 -> 0.10.19-6)
[2013-08-03 13:40] [ALPM] warning: directory permissions differ on /var/log/hp/
[2013-08-03 13:40] [PACMAN] upgraded hplip (3.13.6-1 -> 3.13.7-1)
[2013-08-03 13:40] [PACMAN] upgraded idnkit (1.0-2 -> 1.0-3)
[2013-08-03 13:40] [PACMAN] upgraded ilmbase (2.0.0-1 -> 2.0.1-1)
[2013-08-03 13:40] [PACMAN] upgraded imlib2 (1.4.5-4 -> 1.4.5-5)
[2013-08-03 13:40] [PACMAN] upgraded iso-codes (3.43-1 -> 3.44-1)
[2013-08-03 13:40] [PACMAN] upgraded openexr (2.0.0-1 -> 2.0.1-1)
[2013-08-03 13:40] [PACMAN] upgraded media-player-info (17-1 -> 19-1)
[2013-08-03 13:40] [PACMAN] upgraded qtwebkit (2.3.1-2 -> 2.3.2-1)
[2013-08-03 13:40] [PACMAN] upgraded kdelibs (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdemultimedia-ffmpegthumbs (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-filesharing (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-kdnssd (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-kget (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-kopete (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-kppp (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-krdc (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-krfb (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kid3 (2.3-1 -> 2.3-2)
[2013-08-03 13:40] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-08-03 13:40] [ALPM-SCRIPTLET] lib32-catalyst-utils works with [multilib] repository
[2013-08-03 13:40] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-08-03 13:40] [PACMAN] upgraded lib32-catalyst-utils (13.6-1 -> 13.8-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-libx11 (1.6.0-1 -> 1.6.1-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-giflib (4.2.1-1 -> 5.0.4-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-gnutls (3.2.1-1 -> 3.2.3-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-harfbuzz (0.9.18-1 -> 0.9.19-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-libgcrypt (1.5.2-1 -> 1.5.3-1)
[2013-08-03 13:40] [PACMAN] upgraded libpciaccess (0.13.1-1 -> 0.13.2-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-libpciaccess (0.13.1-1 -> 0.13.2-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-libpng (1.6.2-1 -> 1.6.3-1)
[2013-08-03 13:40] [PACMAN] upgraded mesa (9.1.4-5 -> 9.1.6-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-mesa (9.1.4-1 -> 9.1.6-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-nspr (4.9.6-1 -> 4.10-2)
[2013-08-03 13:40] [PACMAN] upgraded lib32-nss (3.14.3-2 -> 3.15.1-1)
[2013-08-03 13:40] [PACMAN] upgraded libdatrie (0.2.5-1 -> 0.2.6-1)
[2013-08-03 13:40] [PACMAN] upgraded libgdiplus (2.10-4 -> 2.10.9-1)
[2013-08-03 13:40] [PACMAN] upgraded libthai (0.1.18-1 -> 0.1.19-1)
[2013-08-03 13:40] [PACMAN] upgraded libusbx (1.0.15-1 -> 1.0.16-1)
[2013-08-03 13:40] [PACMAN] upgraded libxfont (1.4.5-1 -> 1.4.6-1)
[2013-08-03 13:40] [PACMAN] upgraded linux-firmware (20130610-1 -> 20130725-1)
[2013-08-03 13:40] [PACMAN] upgraded mkinitcpio-busybox (1.20.2-1 -> 1.21.1-2)
[2013-08-03 13:40] [PACMAN] upgraded mkinitcpio (0.14.0-1 -> 0.15.0-1)
[2013-08-03 13:40] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2013-08-03 13:40] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Starting build: 3.10.3-1-ARCH
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'pata' is deprecated. Replace it with 'block' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'scsi' is deprecated. Replace it with 'block' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'sata' is deprecated. Replace it with 'block' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'usbinput' is deprecated. Replace it with 'keyboard' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [fglrx]
[2013-08-03 13:40] [ALPM-SCRIPTLET] Building fglrx module for 3.10.3-1-ARCH kernel ...
[2013-08-03 13:40] [ALPM-SCRIPTLET] Failed!!! Check out log: /var/log/catalyst-install.log
[2013-08-03 13:40] [ALPM-SCRIPTLET] - /usr/lib/modules/3.9.9-1-ARCH looks like unused, maybe remove it manualy?
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Starting build: 3.10.3-1-ARCH
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'pata' is deprecated. Replace it with 'block' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'scsi' is deprecated. Replace it with 'block' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'sata' is deprecated. Replace it with 'block' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'usbinput' is deprecated. Replace it with 'keyboard' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [fglrx]
[2013-08-03 13:40] [ALPM-SCRIPTLET] Building fglrx module for 3.10.3-1-ARCH kernel ...
[2013-08-03 13:40] [ALPM-SCRIPTLET] Failed!!! Check out log: /var/log/catalyst-install.log
[2013-08-03 13:40] [ALPM-SCRIPTLET] - /usr/lib/modules/3.9.9-1-ARCH looks like unused, maybe remove it manualy?
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-08-03 13:40] [PACMAN] upgraded linux (3.9.9-1 -> 3.10.3-1)
[2013-08-03 13:40] [PACMAN] upgraded linux-docs (3.9.9-1 -> 3.10.3-1)
[2013-08-03 13:40] [PACMAN] upgraded linux-headers (3.9.9-1 -> 3.10.3-1)
[2013-08-03 13:40] [PACMAN] upgraded lirc-utils (1:0.9.0-49 -> 1:0.9.0-52)
[2013-08-03 13:40] [PACMAN] upgraded mediastreamer (2.9.0-1 -> 2.9.0-3)
[2013-08-03 13:41] [PACMAN] upgraded meld (1.7.3-1 -> 1.7.4-1)
[2013-08-03 13:41] [PACMAN] upgraded mencoder (36285-1 -> 36285-3)
[2013-08-03 13:41] [PACMAN] upgraded mercurial (2.6.3-1 -> 2.7-1)
[2013-08-03 13:41] [PACMAN] upgraded mplayer (36285-1 -> 36285-3)
[2013-08-03 13:41] [PACMAN] upgraded nepomuk-core (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:41] [PACMAN] upgraded netctl (1.1-1 -> 1.2-1)
[2013-08-03 13:41] [PACMAN] upgraded nfs-utils (1.2.8-8 -> 1.2.8-9)
[2013-08-03 13:41] [PACMAN] upgraded pcsx2 (1.0.0-5 -> 1.0.0-6)
[2013-08-03 13:41] [PACMAN] upgraded rosegarden (13.04-1 -> 13.06-1)
[2013-08-03 13:41] [PACMAN] upgraded soundkonverter (2.0.3-1 -> 2.0.4-1)
[2013-08-03 13:41] [PACMAN] upgraded subversion (1.8.0-1 -> 1.8.1-1)
[2013-08-03 13:41] [PACMAN] upgraded syslinux (4.06-2 -> 4.07-1)
[2013-08-03 13:41] [PACMAN] upgraded telepathy-glib (0.20.2-1 -> 0.20.4-1)
[2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2013-08-03 13:41] [ALPM-SCRIPTLET] warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
[2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Done.
[2013-08-03 13:41] [ALPM-SCRIPTLET] recreating all formats...warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
[2013-08-03 13:41] [ALPM-SCRIPTLET] warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
[2013-08-03 13:41] [ALPM-SCRIPTLET] warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
[2013-08-03 13:41] [ALPM-SCRIPTLET] /usr/bin/fmtutil: line 395: /texconfig/tcfmgr: No such file or directory
[2013-08-03 13:41] [ALPM-SCRIPTLET] fmtutil: config file `fmtutil.cnf' not found.
[2013-08-03 13:41] [ALPM-SCRIPTLET] done.
[2013-08-03 13:41] [ALPM-SCRIPTLET] (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)
[2013-08-03 13:41] [PACMAN] upgraded texlive-bin (2012.0-13 -> 2013.30973-2)
[2013-08-03 13:41] [ALPM] warning: /etc/texmf/tex/generic/config/language.dat installed as /etc/texmf/tex/generic/config/language.dat.pacnew
[2013-08-03 13:41] [ALPM] warning: /etc/texmf/tex/generic/config/language.def installed as /etc/texmf/tex/generic/config/language.def.pacnew
[2013-08-03 13:41] [ALPM] warning: /etc/texmf/dvipdfmx/dvipdfmx.cfg installed as /etc/texmf/dvipdfmx/dvipdfmx.cfg.pacnew
[2013-08-03 13:41] [ALPM] warning: /etc/texmf/chktex/chktexrc installed as /etc/texmf/chktex/chktexrc.pacnew
[2013-08-03 13:41] [ALPM] warning: /etc/texmf/web2c/fmtutil.cnf installed as /etc/texmf/web2c/fmtutil.cnf.pacnew
[2013-08-03 13:41] [ALPM] warning: /etc/texmf/web2c/texmf.cnf installed as /etc/texmf/web2c/texmf.cnf.pacnew
[2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: saving updmap.cfg as /tmp/tmp.4WfV4vnjxi...
[2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: regenerating updmap.cfg (custom additions should go
[2013-08-03 13:41] [ALPM-SCRIPTLET] into /etc/texmf/web2c/updmap-local.cfg
[2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
[2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
[2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
[2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
[2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Done.
[2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: updating the fontmap files with updmap...
[2013-08-03 13:41] [ALPM-SCRIPTLET] updmap: resetting $HOME value (was /home/redac) to root's actual home (/root).
[2013-08-03 13:41] [ALPM-SCRIPTLET] done.
[2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: recreating all formats...
[2013-08-03 13:41] [ALPM-SCRIPTLET] /usr/bin/fmtutil: line 395: /usr/share/texmf/texconfig/tcfmgr: No such file or directory
[2013-08-03 13:41] [ALPM-SCRIPTLET] fmtutil: config file `fmtutil.cnf' not found.
[2013-08-03 13:41] [ALPM-SCRIPTLET] done.
[2013-08-03 13:41] [ALPM-SCRIPTLET] (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)
[2013-08-03 13:41] [ALPM-SCRIPTLET] NB: To setup ConTeXt and the lua(la)tex font db,
[2013-08-03 13:41] [ALPM-SCRIPTLET] see http://wiki.archlinux.org/index.php/TeX_Live
[2013-08-03 13:41] [PACMAN] upgraded texlive-core (2012.29661-1 -> 2013.30962-2)
[2013-08-03 13:41] [PACMAN] upgraded transcode (1.1.7-9 -> 1.1.7-10)
[2013-08-03 13:41] [PACMAN] upgraded twisted (13.0.0-1 -> 13.1.0-1)
[2013-08-03 13:41] [PACMAN] upgraded videoproto (2.3.1-2 -> 2.3.2-1)
[2013-08-03 13:41] [PACMAN] upgraded virtuoso-base (6.1.6-2 -> 6.1.7-1)
[2013-08-03 13:41] [PACMAN] upgraded virtuoso (6.1.6-2 -> 6.1.7-1)
[2013-08-03 13:41] [PACMAN] installed ffmpeg-compat (1:0.10.8-4)
[2013-08-03 13:42] [PACMAN] upgraded vlc (2.0.7-2 -> 2.0.8.a-1)
[2013-08-03 13:42] [PACMAN] upgraded webkitgtk (2.0.3-1 -> 2.0.4-1)
[2013-08-03 13:42] [PACMAN] upgraded wine (1.6rc5-1 -> 1.7.0-1)
[2013-08-03 13:42] [PACMAN] upgraded xorg-iceauth (1.0.5-1 -> 1.0.6-1)
[2013-08-03 13:42] [PACMAN] upgraded youtube-dl (2013.07.17.1-1 -> 2013.07.25.2-1)Okay, so it turns out that this was caused by the Catalyst bug described in this post. Reverting to the 13.6 version solved the problem. Lesson learned: if there's a ton of memory being used that isn't owned by a running process, start looking for bug reports involving drivers. Especially drivers known for being, well, pretty bad. Was there any method I could have used that would have told me that Catalyst was using all my ram, or is kernel-space memory usage pretty much a black box?
Last edited by Chaotechnician (2013-08-08 00:10:43) -
Hey Guys, I been having problems with my mac. I'm running 10.8.5 on my 2008 Power mac tower and recently I have been having problems with my mac
going real slow. I opened Activity Monitor and Noticed something called "Installer" and it was using 90% of my memory and the only thing I can do is quit the process. Does anyone know why this is happening?I ran EtreCheck and i'll post my results. I will add more ram after I fix the problem, and adding an SSD is a good option. I thought about it but
I was holding off because I was thinking of buying a new computer. I will try to keep my sysstem drive clean in the future. After Linc Davis posted about the Trojan i'm planning of doing that. I have a cloned mac drive, I updated the other day using SuperDuper.
My EtreCheck info
Problem description:
“Installer” app is running using High Memory Usage.
EtreCheck version: 2.0.11 (98)
Report generated November 14, 2014 2:06:44 PM PST
Hardware Information: ℹ️
Mac Pro (Early 2008) (Verified)
Mac Pro - model: MacPro3,1
2 2.8 GHz Quad-Core Intel Xeon CPU: 8-core
8 GB RAM
DIMM Riser B/DIMM 1
empty empty empty empty
DIMM Riser B/DIMM 2
empty empty empty empty
DIMM Riser A/DIMM 1
4 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser A/DIMM 2
4 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser B/DIMM 3
empty empty empty empty
DIMM Riser B/DIMM 4
empty empty empty empty
DIMM Riser A/DIMM 3
empty empty empty empty
DIMM Riser A/DIMM 4
empty empty empty empty
Bluetooth: Old - Handoff/Airdrop2 not supported
Video Information: ℹ️
ATI Radeon HD 2600 - VRAM: 256 MB
HP 2509 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.8.5 (12F45) - Uptime: 0:11:2
Disk Information: ℹ️
WDC WD1001FALS-00J7B0 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted> : 210 MB
Hard Drive (disk0s2) / [Startup]: 999.35 GB (456.96 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
WDC WD10EACS-00D6B0 disk1 : (1 TB)
S.M.A.R.T. Status: Verified
disk1s1 (disk1s1) <not mounted> : 210 MB
Media Drive (disk1s2) /Volumes/Media Drive : 999.86 GB (30.09 GB free)
WDC WD3200AAJS-41VWA0 disk2 : (320.07 GB)
S.M.A.R.T. Status: Verified
disk2s1 (disk2s1) <not mounted> : 210 MB
Archive Drive (disk2s2) /Volumes/Archive Drive : 319.73 GB (58.25 GB free)
USB Information: ℹ️
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Seagate Backup+ Desk 3 TB
S.M.A.R.T. Status: Verified
disk4s1 (disk4s1) <not mounted> : 315 MB
Seagate (disk4s2) /Volumes/Seagate : 3.00 TB (2.41 TB free)
Apple Inc. Bluetooth USB Host Controller
Tablet PTK-640
Firewire Information: ℹ️
WD Passport III 800mbit - 800mbit max
S.M.A.R.T. Status: Verified
disk5s1 (disk5s1) <not mounted> : 32 KB
GRPHX Drive 2 (disk5s3) /Volumes/GRPHX Drive 2 : 499.97 GB (126.10 GB free)
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4216 - SDK 10.8) Support
[loaded] com.sophos.kext.sav (9.2.0 - SDK 10.8) Support
[loaded] com.sophos.nke.swi (9.2.0 - SDK 10.8) Support
[not loaded] com.wacom.kext.wacomtablet (6.3.7 - SDK 10.8) Support
Problem System Launch Agents: ℹ️
[failed] com.apple.accountsd.plist
[failed] com.apple.coreservices.appleid.authentication.plist
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist Support
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.bjango.istatmenusagent.plist Support
[running] com.bjango.istatmenusnotifications.plist Support
[running] com.extensis.FMCore.plist Support
[running] com.sophos.uiserver.plist Support
[running] com.wacom.wacomtablet.plist Support
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist Support
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[running] com.bjango.istatmenusdaemon.plist Support
[running] com.crashplan.engine.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.quark.quarkupdate.plist Support
[running] com.sophos.common.servicemanager.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.genieo.completer.download.plist Support
[loaded] com.genieo.completer.update.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.redgiantsoftware.updater.plist Support
[running] com.spotify.webhelper.plist Support
[loaded] com.valvesoftware.steamclean.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
CrashPlan menu bar UNKNOWN (missing value)
Spotify Application (/Applications/Spotify.app)
CrashPlan menu bar Application (/Applications/CrashPlan.app/Contents/Helpers/CrashPlan menu bar.app)
Internet Plug-ins: ℹ️
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.1
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
AdobePDFViewer: Version: 10.1.1 Support
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
SharePointBrowserPlugin: Version: 14.0.0 Support
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions: ℹ️
1Password
Searchme
Slick Savings
Amazon Shopping Assistant
Ebay Shopping Assistant
3rd Party Preference Panes: ℹ️
Flash Player Support
Quark Update Preferences Support
WacomTablet Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
46% Installer
1% WindowServer
1% SystemUIServer
1% Google Chrome
1% ps
Top Processes by Memory: ℹ️
5.43 GB Installer
198 MB Mail
163 MB InterCheck
163 MB SophosScanD
137 MB SophosAntiVirus
Virtual Memory Information: ℹ️
7 MB Free RAM
3.95 GB Active RAM
3.95 GB Inactive RAM
676 MB Wired RAM
488 MB Page-ins
309 MB Page-outs -
KDE 4.7: very slow and high disk usage
Since upgrade to KDE 4.7 on my i686 laptop, my system behaves weirdly. I noticed a slow down caused by a very high disk usage: when the HDD spins the cpu usage reported by the CPU monitor plasmoid is very high (~ 50%), while top reports a very small CPU load. Another strange symptom is that, when I try to close the session, the system freezes for about 15 seconds before the logout/shutdown/restart dialog window appears, again with HDD spinning furiously. If I exit the dialog window and then try to close session again it works smoothly, so I think some caching is at work at second try.
This is very painful since it slows down my workflow. Since now I tried to:
- disable nepomuk, strigi and all that using the nepomukcontroller plasmoid
- disable compositing
- delete .kde folder
- uninstall and reinstall all kde packages
without any benefit. On the same laptop I have dual boot with a 64 bit arch installation, which does not have the same problem, nor has it my 64 bit desktop pc.
Does anyone have similar issues? I don't understand what is it that makes the HDD spin so much, nor how to eventually track it down (are there som HDD usage profiling utilities?). Moreover, why top and CPU usage plasmoid report so different CPU usage stats?
I'm very confused, so any help will be greatly appreciated.Although I'm not having any of the issues as Snack, I have found KDE 4.7.0 to be a very horrible release. In fact, I'm sick and tired of the KDE release notes bragging about killing thousands of bugs each release, when in actuality the first few revisions of each stable release are horrible. When I first upgraded, I ran into at least four really nasty bugs. Although I've worked around some of them, it left a really sour taste in my mouth. Here is what I've experienced:
1.) With a new user or fresh install, there is no wallpaper by default, even if I install kde-wallpapers before I log in, it makes no difference.
2.) Sometimes kwin will crash during log out.
3.) Worse yet, if I exit a full screen game, it will more than likely crash Kwin. This is a problem on my laptop (which has intel video) and not my desktop (which has nvidia video). If I don't remember to disable desktop effects before opening a game, I may run into a problem.
4.) Although my performance is good, it's not great. I would think a laptop with a Core i5 processor and 8GB of RAM would run faster than it is.
I have tested XFCE for a bit, and I do like it alot. However, with XFCE I am unable to browse Samba shares, and that is a huge problem. In addition, I find KDE's applications to be much better than what ships with XFCE, but I question whether they're worth the performance hit. I really love Kate, Gwenview, Digikam, and Amarok. I know you can install those in XFCE, but they feel out of place and then my desktop pretty much becomes a mutt. Not only that, but KDE is full featured, whereas XFCE is not. It's like I have to choose between a stable desktop or a desktop with full of bugs.
I hope that KDE 4.7.1 fixes everything, but historically it's usually the 4.x.2 release that really does the trick. -
Hi!
I would like to know if there is any way of getting system CPU and memory usage using Java code.I want to get the system CPU and memory usage using the performance monitor dll, the perfctrs.dll, but access this data using Java language.Then you should create wrapper dll between your java code and perfctrs.dll and convert data from format of dll to format of your java code.
So, that is next question - how to create wrapper dll, how to deal with or how perfctrs.dll works? -
Very high memory usage since upgrading to 3.6.4
Since upgrading 3 days ago FF pretty much runs up to 500mb as a floor and can get up to 800mb of memory. I had this issue with 3.5 but it vanished with 3.6 and was living in bliss as it rarely broke 250 mb.
I haven't added any extensions nor made any other changes. Is anyone else experiencing this?
== This happened ==
Every time Firefox opened
== Upgraded to 3.6.4Hello everyone.
If you are having problems with RAM/CPU usage, do this:
#run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe-mode] to disable all extensions, themes and plugins. If this fixes your issues, be them with RAM or CPU usage, then you know it's a problem with plugins, themes or extensions. Proceed to number 2. If safe-mode doesn't fix the issues, then read bellow, after this list;
#update all extensions, themes and [https://www.mozilla.com/en-US/plugincheck/ plugins] in your Firefox. If this doesn't solve the issues, proceed to the following number;
#disable all extensions, themes and plugins in your Firefox (not running safe-mode). Being certain that, as in safe-mode, the problems you're having have gone away, enable one plugin at a time. You should be certain that you WANT that plugin to be enabled, so keep your overall number of plugins as low as possible. When you encounter the problems, you know you've found a problematic plugin, so disable it for good. Keep enabling all plugins (except problematic ones) until you've gone through them all.
#enable one extension at a time. Again, be certain that you WANT that extension to be enabled, so keep your overall number of extensions as low as possible. Also, try the theme you want to have installed so see if that is what's causing the problem. When you encounter the problems, you know you've found a problematic extension/theme, so disable it for good. Keep enabling all your extensions (except problematic ones) until you've gone through them all;
#you're done! You've fixed your problems with problematic add-ons. If you want to keep using those problematic add-ons, please contant their author for support.
Ok, if disabling all extensions and plugins through safe-mode didn't work to bring Firefox's CPU and RAM usage to good levels, then you have different issue. The most likely scenario is that you have a third party software running on your computer that is messing with Firefox. Do as follows:
#try reinstalling Firefox. No data will be lost. You can get the latest version for free at [http://www.getfirefox.com/ getfirefox.com]. If that doesn't fix the problem, proceed;
#do a virus/malware check on your computer. If this doesn't fix it, proceed;
#disable all software running in the background that you don't want to have running in the background (in windows, this is done by pressing WINDOWS+R in your keyboard, typing "msconfig" (without the commas) and pressing enter. Now, under the "Startup" tab, you can uncheck the software you don't want, and reboot your system for changes to take effect. If you're unsure of what software you want running, ask someone with more experience). If this doesn't fix your issues with Firefox, proceed;
#check your firewall/antivirus/security suite for enabled functions/features that you don't want and/or may be conflicting with Firefox. You'll find that these features are most likely tied to Internet Security features, such as link scanners or URL checkers and the like. If you're not sure they are conflicting with Firefox, simply try to disable them to see whether or not that's true. As long as you don't browse the web with your antivirus completely off and your firewall completely turned off, there should be no problems. If this doesn't solve the issues, proceed to the following number;
#check your operating system security options, mainly advanced options that are not configured by default. While it's very unlikely that this may be the cause of the problem (after all, it's the last item on the list), it's remotely possible. If this doesn't work, proceed to the following point;
#update your modem/router software. There have been some reports that some modem/router software may cause Firefox and other browsers to loose performance and/or stability. If updating doesn't fix your issue, try other versions of the software, if possible. If you need support with this, contact your modem/router manufacturer. If this doesn't help, proceed;
#clean up your OS registry, using appropriate software. Make sure you've followed my instructions correctly, but if this all doesn't work, [http://support.mozilla.com/en-US/kb/Managing+profiles create a new Firefox profile] (this can be temporary, of course) and see if the issues persist. Report here the results, so we can help you further.
Maybe you are looking for
-
The latest update install without my permission, how I do to delet it
The lasted update install it self without my permission. You had remind me everyday to install it, but I deny because I need my RoboForm very much, but now it's gone. I need it so badly How I do to take it away, because I wanted to wait until RoboFor
-
Which Camcorder should I consider?
I have 14 grandchildren and am not too adept at this new technology, so I'm looking for something that would be good but easy. Any thoughts?
-
Hi Guys, My BBcurve 8900 has stopped recognizing the phone numbers of people I have stored in my contacts list. For example, I have mary's no stored on my contacts list -- but if mary rings me, only her number is visible on the screen, it used to sho
-
I have a hp 2009m with two users, one user , all is normal, 2cd user cannot get past sign on screen
second user cannot get any further than partial log on screen . .system hangs up with HP advisor blinking box
-
How to install plannning adpater to ODI
we have download packeg dimap_11111_windows_x86_client.ara hpa.jar hspjs.jar hp_en.cat hpclient.dll dimap_11111_windows_x86_server hpa.jar hspjs.jar and we copy this file to %ODI_HOME%/lib and %ODI_HOME%/drivers ,but restart topology Manager test Hyp