CPY0007: Select list has fewer columns than destination table

Hi,
I have two table TB in both Database A and Database B. TB in Database A has 100 columns, TB in Database B appended one more column which is nullable. I'm copy TB data from A to B using something like:
insert into TB select * from TB@A where ...
And I got error:
CPY0007: Select list has fewer columns than destination table.
Besides specify the 100 columns plus one new column, any better ways to handle this?
Thanks a lot.

This is kind of dangerous genarally but if you know the additional column is on the end this might work.
insert into TB select a.*, null from TB@A a where ...If this is a regular operation, I would strongly suggest biting the bullet and specifying the column names. Using desc or all_tab_columns and a simple text editor it should take no more than five minutes, which is at least 12 hours less than you have been waiting for a workaround.

Similar Messages

CPY-0007: Select list has fewer columns than destination table

hello, I need your help, here is my problem is summarized in my example below
Exemple
SQL> copy from XX/X@BD1 to YY/Y@BD2 insert TABL1(COL1,COL2)-
using select COL1,COL2 from TABL1
Array fetch/bind size is 15. (arraysize is 15)
Will commit when done. (copycommit is 0)
Maximum long size is 80. (long is 80)
CPY-0007: Select list has fewer columns than destination table
DESC TABL 1
COL1, COL2 DESC
thank u.

bahan wrote:
hello, I need your help, here is my problem is summarized in my example below
Exemple
SQL> copy from XX/X@BD1 to YY/Y@BD2 insert TABL1(COL1,COL2)-
using select COL1,COL2 from TABL1
Array fetch/bind size is 15. (arraysize is 15)
Will commit when done. (copycommit is 0)
Maximum long size is 80. (long is 80)
CPY-0007: Select list has fewer columns than destination table
DESC TABL 1
COL1, COL2 DESC
thank u.
00007,0, "Select list has fewer columns than destination table\n"
// *Cause: On an APPEND operation or INSERT (when the table
//          exists), the number of columns in the SELECT
//          command is less than the number of columns in the
//          destination table.
// *Action: Re-specify the COPY command, making sure that the
//          number of columns being selected agrees with the
//          number in the destination table.

Alternate select lists on 2 columns and return more than 1 column

Hi,
I try to build 2 alternate select lists and each select list should return more than 1 column
2 Columns PART_ID and PART_SPECIFICATION
Now I build a select list on PART_ID like
select part_id d,part_id r from parts;
The result should be:
Column PART_ID has PART_ID and PART_SPECIFICATION must be text of PART_SPECIFICATION
The other select list based on PART_SPECIFICATION should be like
select part_specification d,part_id r from parts;
Now it should be displayed part_specification in PART_SPECIFICATION and part_id in PART_ID.
This is because one user knows the part_id and another knows only the specification
Please help me
Siegwin

Hi Siegwin,
Check your application Page 7(copy of page 500) using select list instead of plugin, it gives all values.
and works very well,
use ajax process to get Xml data into page items
following are changes
application process: getData
application item : TEMPORARY_APPLICATION_ITEM
create one function in page html header pull_multi_value()
and it call on page item p7_empno on html form element attribute as onchange="pull_multi_value(this.value)";
this may Helps you,
Pars.

Cascade select list tack few second to execute application process

Hi,
i have created some application proces fro cascading select list.
BUt when i select some value from select list then list is drpo down after click on slect value it show me drop down list value for few second .
i want when i click on selectted value then immediate relect this cascade list.
How can i resolve it.
Thanks

I am trying to guess from what I understood from your question.So correct me if I am wrong.You have set up cascading select list using ondemand process (onchange call process,retrun XML/JSON , parse the reyurn data and create/append option nodes to the child shortlist ) . The problem is that the child select list has the drop down available for a few second until the ajax HTTP request finishes completion.
Now you don't want any drop own to be available as soon as you select something.
If this is the case, add a line of code that disables the child select list as the first line of the called SJ function and enable it in the last line of the function
onchange="my_cascade_function()"
function my_cascade_function()
$x('SELECT_CHILD_ITEM').disabled=true;
//do ajax request here
//process retrun value, create select list
$x('SELECT_CHILD_ITEM').disabled=false;
}Does that help ?

Creating Select List with multiple columns

I want to create a select list with multiple columns. I followed the demo application model described in the by Denes Kubicek (Currently my reference for APEX !!)
The code is as follows:
CREATE OR REPLACE FUNCTION getcrops(p_cropid IN NUMBER)
RETURN VARCHAR2
IS
v_cropid VARCHAR2 (400);
v_fcode VARCHAR2 (400);
v_product VARCHAR2 (400);
v_var VARCHAR2 (400);
v_fname VARCHAR2 (400);
v_acres VARCHAR2 (400);
v_style_start VARCHAR2 (400);
v_style_end VARCHAR2 (400);
v_return VARCHAR2 (400);
BEGIN
FOR c IN (select "CROP"."CROPID" as "CROP ID",
     "CROP"."FIELDCODE" as "FIELD CODE",
     "CARROTPRODUCTLIST"."CARROTPRODUCTNAME" as "PRODUCT",
     "VARIETYLIST"."VARIETYNAME" as "VARIETY",
     "FIELD"."FIELDNAME" as "FIELD NAME",
     "CROP"."SIZEINACRES" as "ACRES"
from     "FIELD" "FIELD",
     "CARROTPRODUCTLIST" "CARROTPRODUCTLIST",
     "VARIETYLIST" "VARIETYLIST",
     "CROP" "CROP"
where "CROP"."CARROTPRODUCTTYPE"="CARROTPRODUCTLIST"."CARROTPRODUCTID"
and     "CROP"."VARIETYID"="VARIETYLIST"."VARIETYLISTID"
and     "CROP"."FIELDID"="FIELD"."FIELDID")
LOOP
v_cropid := TO_CHAR (c.'CROP ID', 'FML999G999G999G999G990');
v_fcode := c.'FIELD CODE';
v_product := c.'PRODUCT';
v_var := c.'VARIETY';
v_fname :=c.'FIELD NAME';
v_acres :=c.'ACRES';
FOR i IN 1 .. 12 - LENGTH (c."CROP ID")
LOOP
v_cropid := v_cropid || ' ';
END LOOP;
FOR i IN 1 .. 12 - LENGTH (c.'FIELD CODE')
LOOP
v_fcode := v_fcode || ' ';
END LOOP;
FOR i IN 1 .. 12 - LENGTH (c.'PRODUCT')
LOOP
v_product := v_product || ' ';
END LOOP;
FOR i IN 1 .. 12 - LENGTH (c.'VARIETY')
LOOP
v_var := v_var || ' ';
END LOOP;
FOR i IN 1 .. 12 - LENGTH (c.'FIELD NAME')
LOOP
v_fname := v_fname || ' ';
END LOOP;
FOR i IN 1 .. 12 - LENGTH (c.'ACRES')
LOOP
v_acres := v_acres || ' ';
END LOOP;
v_return := v_cropid || v_fcode || v_product || v_var || v_fname || v_acres;
END LOOP;
RETURN v_return;
END;
I created this anonymous Pl/SQL function at a application level ..Then I followed up to create a select list with a function inside. However I could not create select list with the command suggested in the demo which is
select getcrops(cropid) d, cropid r from crop;
APEX (2.1) returns a error message. What am I missing ? Should the function be called from somewhere else after creating a regular select list..? Where the functions (Pl/SQL) should be ideally stored for application level access..? and for across application level access ? How can I check the function works good. Help is appreciated.

Still really one column.
If they need to be independent then you've got to have three selection lists.
%

Selection list with multiple columns

How can i create a selection list with multiple columns?

Still really one column.
If they need to be independent then you've got to have three selection lists.
%

Select list with multiple columns

I want to create a select list with multiple column option. What are the options. Any developments in apex 3.0.1 ? Thanks in advance. I tried the tutorials by Kubicek.
I am kind of stuck to see the function entry inside LOV definition returns a error.

Still really one column.
If they need to be independent then you've got to have three selection lists.
%

Row ranges 1-15, 16-30 in select list has refresh problem

Hi, Gurus:
I use APEX 4.1.1 with Oracle 11GR2. I have a question that was discussed before here, but I still have trouble to understand it. I have some reports that cannot refresh content when I choose another page of the same report. I used row ranges 1-15, 16-30 in select list with pagination. It did not work. However, I used the exactly same report page settings for some other queries producing exactly same columns, except the query logic is slightly different thus number of rows in report are different. row ranges 1-15, 16-30 in select list with pagination works well in other reports.
I came across discussions and set partial page refresh to no for those report pages with refreshment problem. This time it worked well, but it was extremely slow as my query is very slow. I was wondering why some of report do not need to set partial page refresh to no and have no problem to refresh, but some of reports have problem to refresh (I even copied the report page without problem for those reports with problem and just change queries.)? Is there any other way to refresh these reports quicker other than SQL tuing?
Please help me.
Sam
Edited by: lxiscas on Dec 31, 2012 11:36 AM
Edited by: lxiscas on Dec 31, 2012 11:49 AM

I just found that it is due cache page settings, I should set it to no as a developer

Using select list value as column name in SQL

Folks,
Thanks in advance for any help with this
I have a select list with two values (Instance and Username) created by
STATIC2:Username;USERNAME,Instance;INSTANCE
I am trying to pass the value of this (:P2_SELECT) and use it as a column name in a SQL query as below
select USERNAME,
INSTANCE
from table_name
where :P2_SELECT like '%'||:P2_TEXTSEARCH||'%'
When I substitue the :P2_SELECT for one of the values (either instance or username) this works fine
I suspect it is due to how Application Express interprets the value of :P2_SELECT
Any help would be much appreciated!
Gareth

Thanks Munky that worked a treat!
The next hurdle I have now is that because I have changed the region type to "PL/SQL Function(returning SQL Query)" there is no longer the option to add sorting to the columns as I have had to change the Source option to "Use Generic Column Names (parse query at runtime only)"
I will have a scout around and see how I can get around this
Gareth

Need to use Select List value as column name

I want to have a WHERE ? IS BETWEEN ? AND ? clause.
I am using the PL/SQL Query returning a SQL Query as a report. This uses bind variables for items I had set on my form..... If I hardcode something like:
'WHERE STARTDATE IS BETWEEN '||
'TO_DATE(:P1_START,''dd-MON-YYYY HH24:MI'') AND '||
'TO_DATE(:P2_END,''dd-MON-YYYY HH24:MI'')';
I have no problem, but I have 2 date columns, STARTDATE and ENDDATE, and would like to use the value in a select list and not have to hardcode "STARTDATE" in there. I have not been able to do this, does anyone know how to use a bind variable as a column name? From reading some posts I think it might not be possible.

Heather,
You're on the right track, just glue in the column name so that it becomes part of the returned query string from the function (...'WHERE '||:COLNAME||' IS BETWEEN '|| ...).
Note that the bind variable is not part of the returned query string, but the column name obtained from the bind variable when the function executes does become part of the query string.
Scott

Using index in a query return few records than full table access

Today we have an issue with a query, when it use the ok index the returned are not all records that apply to where clause condition.
See bellow
explain plan for
select * from movdb.zan_m03 where
M00AF = TO_DATE('11/01/28','YY/MM/DD') AND
M00za = 10 AND
m00AC = 50 AND
M00AD between 136906 and 136999
SELECT * FROM TABLE(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 1882720105
| Id | Operation | Name |
| 0 | SELECT STATEMENT | |
| 1 | TABLE ACCESS BY INDEX ROWID| ZAN_M03 |
|* 2 | INDEX RANGE SCAN | PK_ZAN_M03 |
Predicate Information (identified by operation id):
PLAN_TABLE_OUTPUT
2 - access("M00AF"=TO_DATE('11/01/28','YY/MM/DD') AND "M00ZA"=10 AND
"M00AC"=50 AND "M00AD">=136906 AND "M00AD"<=137141)
filter("M00AD"<=137141 AND "M00AD">=136906)
Note
- rule based optimizer used (consider using cbo)
20 rows selected.
The query above return only one row insted 1579 record that apply to this conditions.
When forcing a full table acess with a hint, the query return all records that apply, the 1579 record.
select /*+ FULL(zan_m03) */ M00AF, M00za, m00AC , M00AD from movdb.zan_m03 where
M00AF = TO_DATE('11/01/28','YY/MM/DD') AND
M00za = 10 AND
m00AC = 50 AND
M00AD between 136906 and 137141
Can you help me to identify what's happening?
I am with Oracle 10g R2 10.2.0.4 standard edition
the statistics are up to date
the opitimizer_mode are rule, but altering in session level to all_rows happens the same issue.
Nothing about corruption in the alert log.
Thanks in advance
Regards
Cristiano

Yes the query are the same and correct restriction for where clause are M00AD between 136906 and 137141.
I've pasted, by mistake, another test query
The corrects are:
select M00AF, M00za, m00AC , M00AD from movdb.zan_m03 where
M00AF = TO_DATE('11/01/28','YY/MM/DD') AND
M00za = 10 AND
m00AC = 50 AND
M00AD between 136906 and 137141
This use pk index and return one row
select /*+ FULL(zan_m03) */ M00AF, M00za, m00AC , M00AD from movdb.zan_m03 where
M00AF = TO_DATE('11/01/28','YY/MM/DD') AND
M00za = 10 AND
m00AC = 50 AND
M00AD between 136906 and 137141
This does a full table access and return 1579 records
I´ve been searching for wrong results bugs on my oracle support, but not found one that mentions something like our issue.
I checked the dba_tables and dba indexes and the number of rows are different, and I think this would be the same because it's is a pk.
Look this
SQL> select NUM_ROWS from dba_tables where table_name = 'ZAN_M03'
2 /
NUM_ROWS
228527878
select NUM_ROWS from dba_indexes where index_name = 'PK_ZAN_M03';
SQL> select NUM_ROWS from dba_indexes where index_name = 'PK_ZAN_M03';
NUM_ROWS
217510185
Is normal a index for pk having much fewer rows than table? I think not, but not sure.
Again
Thanks in advance
Regards
Cristiano

Dynamically change the value of a select list in form based on a table

Hi Friends,
I am using a form based on a table. I want to display two fields as select lists instead of text boxes and when a value
in a select list is selected, the corresponding values will be listed in the next select list. For example if department
value is selected in a select list the employees in that department will be listed in the employee select list. I saw a
metthod using ajax for achieving this in tabular form in Denes's sample application[Click Here| http://apex.oracle.com/pls/otn/f?p=31517:176:462842537250908::NO] .
Is there any way to achieve the same for a form based on a table,
Thanks,
Tj

Hi Andy,
Could you tell me how I could use your example with multiple Application Items?
My page has 3 cascading select lists. The second is dependent on the first and the third is dependent on both the first and second. I thought I would just need to add the second application item as a get, but not sure what the syntax would be. I have troubleshooted to the point where my select list refreshes when I have one in the javascript...just not sure how to add the additional one?
Here's what I have (I have been referencing your 'Get Employees' page)
My Page Items:
P0_VENDOR_ID
P0_VENDOR_SITE_ID
P0_INVENTORY_ITEM_ID
My Application Items:
F_VDR_ID
F_VDR_SITE_ID
My query in the application process has both F_VDR_SITE_ID and F_VDR_ID in it.
My javascript function...this worked OK until I added the additional get.add('F_VDR_SITE_ID')
function getItems(filter, listName)
var xml = null;
var list = document.getElementById(listName);
var listvalue = list.value;
var get = new htmldb_Get(null,$v('pFlowId'), 'APPLICATION_PROCESS=Set_Items',4);
get.add('F_VDR_ID', filter.value);
get.add('F_VDR_SITE_ID', filter.value);
ret = get.get('XML');
if(ret)
var s = ret.getElementsByTagName("select");
if(s){
var o = ret.getElementsByTagName("option");
var oCount = o.length;
list.options.length = 0;
for(var i = 0; i < oCount; i++){
var l_Opt_Xml = o;
appendToSelect(list, l_Opt_Xml.getAttribute('value'), l_Opt_Xml.firstChild.nodeValue);
list.value = listvalue;
if (list.selectedIndex == -1)
list.selectedIndex = 0;
get = null;
Thanks,
Janel

Grant select privilege to specific columns on a table to user in Oracle 9i

Can anyone tell me how to grant select privilege to a user for specific columns in a table?
I have tried the following statement
GRANT SELECT (EMP_ID) ON EMP TO USER1
But it's not working and I am getting this error "Missing ON Keyword".
Please anyone tell me how to grant select privilege for specific columns.
Edited by: 899045 on Nov 24, 2011 7:03 AM

899045 wrote:
Can anyone tell me how to grant select privilege to a user for specific columns in a table?
I have tried the following statement
GRANT SELECT (EMP_ID) ON EMP TO USER1
But it's not working and I am getting this error "Missing ON Keyword".
Please anyone tell me how to grant select privilege for specific columns.
Edited by: 899045 on Nov 24, 2011 7:03 AMFrom the 9.2 SQL Reference manual, found at tahiti.oracle.com (http://docs.oracle.com/cd/B10501_01/server.920/a96540/statements_912a.htm#2062456)
*"You can specify columns only when granting the INSERT, REFERENCES, or UPDATE privilege. "*

Select list pagination not working for big tables

Hi,
i am trying to view a table with large amount of data using tabular form. the pagination using select list is not working in this page. i have selected select list kind of pagination but it is showing "row range 1-15 16-30(with set pagination)' type of pagination. when i lowered the amount of data in the table the pagination type will automatically change to select list pagination. could you please tell me why this happens and any possible work around if any.
Thanks,
Jo

Hi Jo,
I don't know what you call a large amount of records, but the effect you describe might be intentional by apex.
The select list pagination would generate a selection tag with (number of records in table/15) options in your page HTML.
Although there isn't a hard limit to the number of options a select list can have there certainly is a limit to what your browser/pc can render.
Think about it
Let's say you table contains a million rows. this would result to a select list with 66666 options. Which your browser won't handle :)
I very possible the apex team resolved this by simply reverting to row range pagination when the number of select options would grow to large.
Geert

With Mail 8.0, the SMTP server selection list has gone?!

Hi,
I use one primary IMAP email account, but multiple addresses, and I have to send my emails using different SMTP servers, according to the email address domains. Now, before updating to OS X 10.10 Yosemite, in the New Mail window, there always was a "Send Using" SMTP server selector right next to the email address selector. Now that's gone, and I can't figure out how to bring it back.
So now I'm unable to send email using other than my primary domain address.
Any ideas?
In fact, if someone could tell me how to directly assign a specific SMTP server to an email address (not to an email account! Remember: I have multiple addresses in one account) - that would be of great help, too.
Thanks much in advance!

I too would like to have the option of being able to select which smtp server to use for each email. Often when I am at a client location I have to use my tethered cellphone for network connection and this requires a specific telco smtp server to be used. Currently now there is a wait while Mail tries a few times with the primary smtp server associated with the account (my normal provider I reach when at home on the broadband) and some indeterminate time later it decides to poll the next server on the list (the telco one). Once it has done this successfully once then further emails seem to get routed immediately to the current smtp server. But the first time each day is a lottery on how long it will take.

CPY0007: Select list has fewer columns than destination table

Similar Messages

Maybe you are looking for