CQ5.6 SiteCatalyst: mapping of s.contextData missing in framework

Hi guys,
is there any "official" way of adding s.contextData to the mapping table of a SiteCatalyst framework in CQ5.6? It does not show up in the framework setup page so right now my work around is adding it to the mapping table via CRXDELite.
/etc/cloudservices/sitecatalyst/<sica config>/<sica framework>/jcr:content/mappings/foundation_components_page
This seems to work and the mapping entry appears in the renderedpage but is not reflected in the framework config page
http://localhost:4502/cf#/etc/cloudservices/<sica config>/<sica framework>.html/scview
Any ideas?
Cheers,
Bjoern

Hi Bjoern,
Unfortunately, this is not possible at the movement. CQ assumes the variable to be s & many JS code assumes the variable name to be s.
File daycare with business case.
Thanks,
Sham

Similar Messages

Ovi map - My Position icon MISSING (N8)

Hi,
I just got my N8 few days ago. After updating Ovi maps to the newest version ( 3.06 if not mistaken ) I have noticed a few problems.
1) My Position icon is totally missing, that means i can't locate my current position in gps. that's really bad.
2) Gps cant lock even after a pro-long scanning time, moreless 30 mins anywhere. I'm using intergrated positioning. Red signal blinking, no data found.
3) I tried to delete the CITIES folder and qf file, and reinstalled the ovi map downloaded, but problem still remains.
I haven tried anyform of hard or soft reset yet, as i found lots of people facing problems doing that. Is there any other way to ocmpletely remove ovi map & reinstall it again, or i need to do a reset ?
I would like to get some advice from you guys on solving my gps issues. Thank you

Some cars have coated windscreens which can reflect gps signals and this will slow down position fix. One way of testing would be to compare how long it takes to get a fix in the car as out of the car. I generally get a fix after about a minute.
My suggestion if it is a windscreen coating problem would be to get yourself an external bluetooth gps receiver. They are very cheap nowadays. The advantage of using this is the external receiver is usually much more sensitive and you can also place them anywhere in the car to get the best possible signal. I have a few of them. They work well and would normally get a position fix in seconds.

Mapping Problem: only constants are mapped the rest is missing

Hi Community,
I have a really strange problem. I mapped a message type and an external definition (a modified IDoc) in the repository. If I use the test function of the message mapping everything is fine. All values and constants are mapped correctly from source to target.
So I configured the rest in the repository and the directory and activated it. But it does not work. SXI_MONITOR details show that the source flat file is converted correctly into XML format. But the mapping is incomplete. Only the target fields with a constant as source are mapped. The normal one-to-one mappings (source flat file to external definition) are missing. Somehow they are ignored. Not even an empty tag is mapped.
What I am doing wrong?
Thanks for you help,
Udo

Hi,
Take the payload from SXMB_MONI and test it in message mapping editor.
check the problem there..
Thanks,
Madhu

While field mapping some fields are missing....

Hi,
In field mapping I have some fields are in unassigned status after select auto field mapping.How can I assign this fields ?bcs in standards program this fields are not there.pls guide me..

Hi,
In maintain source field option ....you will find a button square button with lines on it ......
Thanks
Dipak

Bookmarks for maps in iOS 8 missing

Since installing iOS 8 on my 3rd gen iPad the bookmarks in the Maps app seem to have been removed.
Can we no longer bookmark a location/address in the Maps app?
Message was edited by: missynsmoky

Hi Bob. No, I don't mean Favorites. Before iOS 8 I could search for an address in Maps, hit the ">" to the right of the red pin and have displayed a window with several options, one of which was to save that address as a Bookmark. I had saved many addresses this way and could bring up an address in Maps just by hitting the Bookmarks button at the top right of the screen, then scrolling down until I could see the address that I had saved.
With iOS 8 I see Share in the top right. When I do a search of an address and hit the ">" I get a window with Address, Directions, Create New Contact, etc, but no Bookmarks.
I just wonder if Apple replaced that function with something else, removed that function. Or am I looking in the wrong place?
Jay

CQ5.4 Content Sync feature pack missing event list component ?

Hi,
I'm trying to get the Content Sync facility in CQ 5.4 working after installing the cq-5.4.0-featurepack-34279 package from package share. When I invoke the URL to get the content sync package it works fine, but the events.touch.plist file actually contains a 404 HTML page.
Digging a bit deeper I haven't got the event list component installed under the /apps/geometrix/components tree, which would account for this. When I preview the pages in the demo site the events component isn't surfaced at all. Looking at the package contents for the featurepack the event list isn't in it.
The sample iOS app looks for a file under /content/geometrixx_mobile/en/events.touch.html in the package, which is missing too.
Am I missing a step, or has the feature pack not been ceated properly ?
Thanks,
Jon.

Hi Sathya,
Seems the field “RegistrationsInfo” is not been found when deploying with Event Receiver, a possible reason is that it might be damaged.
As a workaround, I suggest you retract the solution from your farm, make sure the “RegistrationsInfo” field is deleted using PowerShell, then create another project with the same
content and perform the deployment again.
About how to delete a field using PowerShell for your reference:
https://peterheibrink.wordpress.com/2011/12/09/powershell-delete-field-and-all-references/
http://www.sharepointfix.com/2011/04/powershell-script-to-delete-site.html
Feel free to reply if there any progress.
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Can we use Google maps in IOS 6.0 Mapkit framework ?

Please find the description of the solution we did to render Google Maps in IOS. Please suggest whether it will approved on app store.
Problem :
The Map Kit framework will render Apple maps in IOS 6.0. It is not possible to force the MapKit to render Google Maps in IOS 6.0. But customer is not interested to use Apple maps because most information are not correct.
Proposed Solution
It is possible to add Google Map (or any other map tile) layers on top of the Apple MapKit framework. The basic idea is to add a custom tile overlay to the existing map, so all your annotations etc will be on top Google Map layer.
If the titles of the Apple MapKit framework will be removed before adding the Google Map layers. It will show only the Google Map in the Apple Map Kit framework.
Thanks in Advance
Selvaraj.

You might want to check with Google first.

MAM 3.0 - Language "Finnish" is missing in framework for choosing this lang

Hello,
we want to support several languages in MAM3.0 and we need to support language "Finnish". If I take a look to settings (on running client) of MOBILEENGINE_JSP framework and try to change language, only following are supported:
cs, da, de, en, es, fr, hu, it, ja, ko, nl, pl, pt, ru, sv, zh, zf
If I look to file of MAM3.0 "property_files.lst I see following languages:
MAMText_cs.properties
MAMText_da.properties
MAMText_de.properties
MAMText_en.properties
MAMText_es.properties
MAMText_fi.properties
MAMText_fr.properties
MAMText_he.properties
MAMText_it.properties
MAMText_ja.properties
MAMText_nl.properties
MAMText_pt.properties
MAMText_ru.properties
MAMText_sv.properties
MAMText_zh.properties
MAMText_zf.properties
If you can see, "fi" for Finnish is existent as translation file, but I cannot choose Finnish in framework and for MAM application.
How I can get the missing language? Is there a special installation from client for Finnish?
Thanks a lot in advance.
Kind regards
Andreas Dommes

Hello Akhil,
thanks for your reply. I know the configuration in SPRO and this part is fully ok.
Our problem is, we cannot choose in framework the language "Finnish". It is a problem of framework, because the "fi" part on settings page/laguage is missing. So we can download data in finish, but the headlines, buttons etc. in application (here in MAM) are in the selected language of framework.
Thanks.
Kind regards
Andreas

Soundtrack Pro cannot launch. Missing PtoFX.framework

Just installed Logic Studio 9 and ran the updater to make sure I have the latest versions of everything.
Logic Pro, Main Stage ... work fine, but Soundtrack Pro would not open. Here is what I get
Dyld Error Message:
Library not loaded: /Library/Application Support/ProApps/SharedA/Frameworks/ProFX.framework/Versions/A/ProFX
Referenced from: /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
Reason: image not found
I searched left and right for the solution to no avail.
I put in the installation disc again, but I cannot select Soundtrack Pro (Or Compressor for that matter) to be installed. It is simply in the disabled state.
Can anyone help?

A small caveat - I could not get the Compressor to work using this method so Compressor still crashes as soon as it opens up.
I did some more digging around and found the following.
1) Soundtrack Pro and Compressor were not installed originally with Logic Studio. The installer said that I already had newer version installed. I never installed Soundtrack pro or Compressor before. /Library/Receipts does not contain any references to either one.
2) I tried to remove both apps according to Apple instructions to no avail. Installer still thinks I have them.
3) I tried (following Apple recommendations) changing the value of the Soundtrack Pro version to force the software update to update Soundtrack Pro. Changing version from 3.0.1 to 3.0.0 does nothing. Changing it to 2.0.1 prompts to install 2.0.2 which I did not want to do since I am not sure what kind of damage that will do to the rest of the system.
So basically - if anyone knows how to force the installer to install Soundtrack Pro from the actual Logic Pro DVD - that would be the real solution.
Any help is appreciated.
Thanks

Gis map legend missing on .pdf exporting

Hi guys,
i've a big problem with the WAD exporting for printing.
I've a simple gis map template with legend visible.Template is running fine on internet explorer but when i try to print report (right clic on the map - printable version) in the output .pdf file the legend is missing.
I try everything: with ie print, with adobe pdf ie add-on, exporting in excel format but the map legend is always missing.
Can anyone help me?
Thanks in advance.
Andrea

Hello Andrea,
you should check the properties for the map web item in your export template.
The content template is 0ANALYSIS_PATTERN_EXPORT for the print version.
There might be the "display legend" flag turned off.
Regards
Tobias

Features missing in translation in Here maps/drive

I just came home from a road trip from sweden to kroatia. Through the trip I used my lumia 920 for maps and navigations. I have done similar trips with my Nokia N8 (symbian belle) before.
Sadly the old N8 did a better job. Don't get me wrong, the lumia also did a good job but there where a few missing features that were really annoying.
* Major miss: Here maps/drive cannot check alternative routes. This works on symbian, wehere you can add waypoints along the wanted route.
* Major miss: When on location I want to check for restaurants only or perhaps hotells only etc. Impossible in the Here maps/drive. I could only use the "places" function, that is utterly useless. I am not interrested in shops when looking to a place to eat, neither am I interested in police or hospitals when I looking for a place to sleep.etc. I could of course use the "search" but then I need to now the name of the restaurant and when I am in a new town this is not possible.
In Symbian you could show all available locations in a specific category that were within the maps zoom range.
Example hotel category, bank category etc.
* Minor miss: the setting for which kind of roads that Here Drive are allowed to use (toll roads, ferries, ...) is only avalible when selecting a place in Hera maps and the -> directions. This setting is not even available in Here Drive!! The app that actally needs it! You cannot reach this setting from the normal "settings" menu in either of Maps or Drive
Minor miss: Why two apps? Merge them
Minor miss: Option to always show specific categories on the map without needing to search for them.
Verrrry minor: Bring "Own voice" to windows phone. This is not usefull at all but extremly amusing. Especially when the kids have spoken all the messages.
Btw.. All mentioned missing features were available on the Nokia N8 but went missing when "upgrading" to a Lumia 920.

yasfer21 wrote:
There is a feedback option in the application. You can utilize that to send information on what you think should be improved in the application.
The missing features from Symbian has been feedbacked in over one and a half year, with no result at all.

Recruiter Role 1.40: Missing Services Tray & Service Map in EP

Hi everyone
we're implementing SAP E-Recrruiting EHP 4 (SP04). We did some basic customizing in backend and installed Recruiter 1.40 and Recruiting Administrator 1.40 BPs on portal side.
After assigning portal roles to users, on first sight everything looks OK. But compared to other installation, there is no Service Map and no Services tray on the left side of recruiter role. Service map iView is also missing in portal content of the role.
The "create requisition" button in the Dashboard leads to error "iView not found".
Calling the preview for "create requisition" from portal content works as it should.
I created a service map iView manually and attached it to the recruiter role. Now I'm able to use all the functions in there w/o any problems! Created requisitions are shown in Dashboard for example.
SLG1 is (just) logging errors resulting from attempted searches in the Recruiter Dashboard. As TREX customizing isn't done, one can expect this to happen.
What are we missing? Is there some basic setup missing on portal side we forgot about?
Thanks for any advice!

Hi Sanjay
Did you find a solution for your problem?
regards
Murat

Error/Warning while validating a mapping

I'm using OWB version 9.2 and database 9i.
I have few major problems in OWB. We have stage and star schemas on the same database instance. The source system is on a different database instance. There are database links created between target instance to source.
I have about 20 mappings; all validated, deployed and executed successfully about 2 weeks back.
Beginning of this week I logged on to OWB and tried to make some changes to one of the mappings. Before I made changes I tried to validate the mapping and I got following warnings:
"VLD-1008: Referenced mapping column <COLUMN_NAME> does not exist"
"VLD-1003: Reference <COLUMN_NAME> between mapping object and repository object does not exist".
When I click on "View Details" it says I need to reconcile outbound of the staging table.
When I have not made any changes to the mapping why do I need to do this? I want to know under what circumstances do we get this message?
Another weird thing is I validated the mapping, after 15 minutes I tried to deploy this and still got the above warnings, although I had reconciled outbound and successfully validated the mapping. Am I missing something here?
Another problem is I have a mapping which loads a dimension from staging table. Very simple basic mapping all it does is dumps from staging table to dimension and key is generated by sequence generator. Both stage and star schemas are on the same database instance. When I try to validate this mapping it gives me error:
"VLD-2769: Database link is not allowed for data target <DIMENSION_NAME>" and when I click view details it shows following:
"Loading of data across database link is not supported. Deploy this mapping within the same database instance as the actual target and remove the database link access specification from the physical configuration of this data target operator."
I have not specified any database link or schema name in the mapping configuration; both stage and star schemas are on same instance. Although there are two instances that it works fine. First if I provide the schema name in the mapping configuration it gives me warning but deploys and executes fine. Secondly if I go to deployment manager, select the mapping and click deploy it validates successfully. Why do I get this error when I validate in the mapping editor?
I never had these problems before; all the mappings were validated, deployed and executed successfully.
I would like to know where/what could have gone wrong? Could any of you point me in the right direction? Any help would be greatly appreciated.
Thanks

hi.
ok look i also had this errors:
"VLD-1008: Referenced mapping column <COLUMN_NAME> does not exist"
"VLD-1003: Reference <COLUMN_NAME> between mapping object and repository object does not exist".
this errors could be due to that something has change in the source database, in this case could be that somebody change the name column since the last time you did the load.
A possible solution is that you open the mapping (edit) and reconcile the tables both the table "from"(where the table came) and the table "to"(the table destination).
ooh and check the source system for any table that has changed, if it changed, so you have to load again the table.
bye

Issue with XSLT For each loop in B2B Mapping

Hi All,
I am trying to map the inbound 997 Payload into Headers and Lines Table. I am using the For Each XSLT Construct to map the Loop AK2 of 997 into the 997 Lines Collection.
Issue I am facing is that if the Loop AK2 is repeated for 33 times then for all the 33 times only its first element's value is getting passed into the target of mapping file.
in coming payload
<Loop-AK2>
<Segment-AK2>
<Element-143>810</Element-143>
<Element-329>0001</Element-329>
</Segment-AK2>
<Segment-AK5>
<Element-717>A</Element-717>
</Segment-AK5>
</Loop-AK2>
<Loop-AK2>
<Segment-AK2>
<Element-143>810</Element-143>
<Element-329>0002</Element-329>
</Segment-AK2>
<Segment-AK5>
<Element-717>A</Element-717>
</Segment-AK5>
</Loop-AK2>
<Loop-AK2>
<Segment-AK2>
<Element-143>810</Element-143>
<Element-329>0003</Element-329>
</Segment-AK2>
<Segment-AK5>After transformation using XSLT file the payload looks like as follows
<ns0:XxmfiEdi997_AckLines>
<ns0:lineId>33</ns0:lineId>
<ns0:trxSetIdentCode>810</ns0:trxSetIdentCode>
<ns0:trxSetControlNumber>0001</ns0:trxSetControlNumber>
<ns0:segmentCode/>
<ns0:segmentPosition/>
<ns0:segmentError/>
<ns0:trxSetAckCode>A</ns0:trxSetAckCode>
</ns0:XxmfiEdi997_AckLines>
<ns0:XxmfiEdi997_AckLines>
<ns0:lineId>34</ns0:lineId>
<ns0:trxSetIdentCode>810</ns0:trxSetIdentCode>
<ns0:trxSetControlNumber>0001</ns0:trxSetControlNumber>
<ns0:segmentCode/>
<ns0:segmentPosition/>
<ns0:segmentError/>
<ns0:trxSetAckCode>A</ns0:trxSetAckCode>
</ns0:XxmfiEdi997_AckLines>
<ns0:XxmfiEdi997_AckLines>
<ns0:lineId>35</ns0:lineId>
<ns0:trxSetIdentCode>810</ns0:trxSetIdentCode>
<ns0:trxSetControlNumber>0001</ns0:trxSetControlNumber>
<ns0:segmentCode/>
<ns0:segmentPosition/>
<ns0:segmentError/>
<ns0:trxSetAckCode>A</ns0:trxSetAckCode>
</ns0:XxmfiEdi997_AckLines>
<ns0:XxmfiEdi997_AckLines>
<ns0:lineId>36</ns0:lineId>
<ns0:trxSetIdentCode>810</ns0:trxSetIdentCode>
<ns0:trxSetControlNumber>0001</ns0:trxSetControlNumber>
<ns0:segmentCode/>
<ns0:segmentPosition/>
<ns0:segmentError/>
<ns0:trxSetAckCode>A</ns0:trxSetAckCode>
</ns0:XxmfiEdi997_AckLines>
<ns0:XxmfiEdi997_AckLines>
<ns0:lineId>37</ns0:lineId>
<ns0:trxSetIdentCode>810</ns0:trxSetIdentCode>
<ns0:trxSetControlNumber>0001</ns0:trxSetControlNumber>
<ns0:segmentCode/>
<ns0:segmentPosition/>the Element-329 of incoming source payload is mapped to trxSetControlNumber of target payload, the issue is obvious from the above XML data that trxSetControlNumber is always having the value 0001 for every occurence where as its expected to fetch the value of the element of its corresponding occurence not the first elements value.
Please find below the xslt file code i used for mapping
<ns0:XxmfiEdi997_AckHeadersCollection>
      <ns0:XxmfiEdi997_AckHeaders>
        <ns0:headerId>
          <xsl:value-of select='oraext:sequence-next-val("XXMFI_EDI_997_ACK_HEADERS_S","jdbc/MTSI-apps")'/>
        </ns0:headerId>
        <ns0:processFlag>
          <xsl:text disable-output-escaping="no">I</xsl:text>
        </ns0:processFlag>
         <ns0:xxmfiEdi997_AckLinesCollection>
          <xsl:for-each select="/ns1:Transaction-997/ns1:Loop-AK2">
            <ns0:XxmfiEdi997_AckLines>
              <ns0:lineId>
                <xsl:value-of select='oraext:sequence-next-val("XXMFI_EDI_997_ACK_LINES_S","jdbc/MTSI-apps")'/>
              </ns0:lineId>
              <ns0:trxSetIdentCode>
                <xsl:value-of select="/ns1:Transaction-997/ns1:Loop-AK2/ns1:Segment-AK2/ns1:Element-143"/>
              </ns0:trxSetIdentCode>
              <ns0:trxSetControlNumber>
                <xsl:value-of select="ns1:Segment-AK2/ns1:Element-329"/>
              </ns0:trxSetControlNumber>
              <ns0:segmentError>
                <xsl:value-of select="/ns1:Transaction-997/ns1:Loop-AK2/ns1:Loop-AK3/ns1:Segment-AK3/ns1:Element-720"/>
              </ns0:segmentError>
              <ns0:trxSetAckCode>
                <xsl:value-of select="/ns1:Transaction-997/ns1:Loop-AK2/ns1:Segment-AK5/ns1:Element-717"/>
              </ns0:trxSetAckCode>
            </ns0:XxmfiEdi997_AckLines>
          </xsl:for-each>
        </ns0:xxmfiEdi997_AckLinesCollection>
      </ns0:XxmfiEdi997_AckHeaders>Is there something I am doing wrong in mapping or am I missing something here. Please suggest .
Thanks in advance
~TK.

Hi,
In your xslt code within the for loop, for the trxSetIdentCode why are you using the xpath "/ns1:Transaction-997/ns1:Loop-AK2/ns1:Segment-AK2/ns1:Element-143"? It should be just "ns1:Segment-AK2/ns1:Element-143". Similar changes for segmentError and trxSetAckCode also should be done. Remove the '/ns1:Transaction-997/ns1:Loop-AK2/' part from your xpath expressions inside the for loop and try it.
Sahay

How to create a map in SAP BI???

Dear SAP BI Experts,
I have a difficulties to make a map in BI and missed the steps procedure how to create a map. I have an ESRI CD Map and Arc VIew application. What is the first step if i want to create a map and is there any procedures or manuals from the beginning "how to create a map in SAP BI" ???
So sorry for stupid question!!!
Thank you very much for your time and help.
Best Regards,
Rudy (SAP BI Team)

Hi Nirmansyah,
Please check the below link.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/step-by-step%20procedure%20for%20creating%20customized%20bex%20maps.pdf
Hope this helps.
Veerendra.

CQ5.6 SiteCatalyst: mapping of s.contextData missing in framework

Similar Messages

Maybe you are looking for