Enter material in Stock to do the delivery

I am trying to do a Delivery from a Sls Order. In Sls Order it was confirmed the schedule line. However I do not have material in stock.
How an easy and fast way to enter material in stock in order to create my delivery?
What is the t-code and the movement? By the way, what is the movement to unrestricted stock?
Many thanks,
Barbara

Hi Barbara,
To bring the stock in your Plant for creating delivery use the following steps:
a) Use T-code MB1C
b) Enter movement type as 501
c) Enter the relevant Plant and Storage location and press ENTER
d) Enter the material number and the desired Qty and press ENTER
e) Save the document. System will prompt you a message "Document xxxxxx posted"
f) Use t-code MMBE to check the stock
g) Go in the sales order and select the line where you have entered the material number and qty
h) Click on icon "Check item availablity" and save the order. System will give you a new schedule line date
i) Now you can create the delivery for this date
Hope it helps.
Regards,
Ajinkya

Similar Messages

  • Order as Direct Material Changes the Delivery Address

    Hello,
    We have encountered an odd behavior when the Order as Direct Material button is pressed. The delivery address that previously displayed is changed to the plant address.
    Is this normal? Can it be de-activated so that is does not changes the address?
    Regards, Dean

    Muthu,
    Thanks for the reply.. been busy...Is there a way to change this behavior with BADIs, etc? I think I can do it BBP_DOC_CHANGE_BADI. However, I thought there might be a more elegant way .
    Regards, Dean.

  • Regarding- Packing Line Item Not Displayed in the Delivery Document.

    Hi,
    I have 2 queries
    1) Have  created separate Material Type Packaging for my packing material and the item category group used is VERP, my Orginal Material is getting packed in the Delivery Document, however the packed item is not coming as a separate line item in the Delivery document, I have maintained the item category settings for the Delivery Packing Material and also the packing Material contains stock,
    2) The Plant and Storage Location for my handling unit need to get defaulted autmatically in the delivery document what settings should I configure for the same.
    Kind Regards
    Atul Keshav

    Hi,
       Find the below threads, which is explained in context with returnable packaging, same will be useful for you.
    [Re: returnable packaging]
    [Returnable packaging process;
    Regards,
    Reazuddin MD

  • Can we receive goods before the delivery date

    Hi all
    Can we receive goods before the delivery date i.e.
    PO is created on 10/04/2008 and in the PO delivery date is given as 14/04/2008.
    But if the vendor sends me material on 12/04/2008 system allows me to post the material.
    Is there any settings to restrict GR before the delivery date.
    With Rgds
    Vinod

    Thanks for your information
    But I dont have enough space to store the material if he delivers before the delivery date.
    In this circumstences how can i prevent the system to post the GR.
    With Rgds
    Vinod

  • I would like to see the stock level of the material through T code

    hi
    I would like to see the material stock by plant storage location
    the required details are Unrestricted avilable stock , Order stock , delivery stock , blocked stock , quality stock
      what is the T code to view all those things
    Dinesh

    Hi
    use T code <b>MB52</b> to view stock in detail
    Vishal...

  • Serial Number Stock Check at the time of Delivery

    Experts,
    Process:
    Sales Order PR(Purchase Order) GR( New Serial Numbers are created automatically or manually keyed in)
    Once the Goods Receipt is received, we do the (SO) DELIVERYu2014SERIAL NUMBER ASSIGNMENT Post Goods Issue
    Issue:
    Current Serial Number Profile Management does not do a valid serial number check during DELIVERY CREATION where we do a SERIAL NUMBER ASSIGNMENT.
    Only during POST GOODS ISSUE, the check happens for valid serial numbers; this is too late in the game for business as there is a time lag of 3 days from the DELIVERY CREATION and PGI.
    Reason being--- We donu2019t check the following u201C Existing Stock Checku201D( which does a serial number validation during delivery creation as well)
    SPRO>Plant Maintenance and Customer Service>Master Data in Plant Maintenance and Customer Service>Technical Objects>Serial Number Management>Define Serial Number Profiles
    If we check this option, the business requirement to do a valid serial number check does happen during delivery creation, however we cannot create new serial numbers during Purchase Order- GOODS RECEIPT.
    QUESTION:
    Can we have the system check the valid serial numbers from stock during delivery creation and serial number assignment.
    And Also create new serial numbers during Purchase Order- Goods Receipt.

    Hi,
    Thanks for the reply.  This field is having the value the count of serial numbers entered irrespective of the valid serial numbers entered.  I created two delivery document, one with serial number which was not there in the stock and the other with a valid serial number.  For both the delivery document LIPS-ANZSN gives the count of serial number which I have entered.
    Please let me know how can I move further.
    Rgds,
    Gopali

  • Not picking the stock for the delivery

    Dear friends,
    Though the stock is available, it is not getting picked for the delivery.
    Can you guide me what are the things I should check to solve the issue.
    With regards,
    Atul

    Hi,
    If the picking tab is grayed use T.Code LT03.( IF ware house management is activated).Here fill the ware house number and plant and mention the delivery note number also. Now use The T.Code TCode VL02N here u can see the system automatically picks the required quantity.
    If the picking tab is not in gray mode mention the storage location and the plant correctly. Even though the system is not picking the quantity check the Picking location determination with rule MALA.and also check any open orders are crated for the particular material .
    regards,
    vas.
    Message was edited by:
            v.s.vas.

  • How to enter a specific vendor for  the delivery costs in purchasing order?

    Now I want to create a purchasing order including planned deliver costs such as Freight, Coustoms ect, as the vendor of such planned deliver costs is different from the goods supplier, then How to enter a specific vendor for  the delivery costs in purchasing order? That means the partner for invoice partner will be two vendors at least in one purchasing order. thanks very much.
    <i>
    <b>No one would like to answer this question?</b></i>
    Message was edited by:
            King Qi

    hi, 
    You can have vendor at each condition record level.
    try it out.
    cheers
    Rav

  • Delivery without reference for stock transfer within the same plant 311

    Dear all,
    I need to create a delivery without reference for stock transfer within the same plant, movement 311,  i.e. just from 1 storage location to another storage location.
    I tried to use VL01NO with delivery type UL.
    Now my question is how can I assign a receiving plant for a customer?
    I can't do the MIGO or MB1B document because I need the delivery document (packing list, forms, Texts,...).
    It's possible this option???
    Thank you very much.

    Hi,
    What is the item category you are assigning while doing VL01NO?  Check the schedule line category for that item category assignment.  That Schedule line category has an option for one step GI.  There you can assign 311 or create a separate item category and schedule line category and in that SC assign 311. 
    Thanks
    Krish.

  • I want better solution for adjusting the Material stock values for the last

    my Customer  need to adjust( Decrease)  the closing stock values for the following materials / plant wise as on 31.03.2006 for meeting statuary compliance.
    Material1 :  RS: 4149599    QTY : 10181.03 Ltrs
    Material 2  : RS: 1318596     QTY:  2152.76   Ltrs
    As per my knowledge MM posting periods can open current month and Previous month only. For the reason I proposed the solution as follows:
    Step 1 : post FI Journal Entry on 31.03.2006
    Opening Balance G/L  Account Dr 4149599 + 1318596
    Closting Stock a/c                      Cr 4149599 + 1318596
    Step 2.
    Change the Material Price in MM through T.Code: MR21
    ( Posting will be allowed in current or previous months)
    This makes our CO reports accurate.
    Please  suggest the better solution if it is possible in MM for adjusting the Material stock values for the last financial year.
    WIth Best Regards,
    Rajesh
    <b></b>

    Hi Madhavan,
    Unfortunately this forum deals with migrations from non-Oracle
    environments to Oracle. You seem to be dealing with migrations in
    an Oracle environment mainly.
    I would recommend that you contact Oracle Applications and RDBMS
    support directly. They will have the most up to date
    information/advice on performing these actions.
    Regards
    John
    Madhavan (guest) wrote:
    : Hi John
    : Thanks for your reply.
    : Actually I am planning to upgrade the system.
    : 1. I Want to Upgrade Oracle Financials release 10.7 to the
    : latest version (11.x)
    : 2. Oracle 7 database to oracle 8 or 8i.
    : 3. Oracle is running on NT service pack 3. Do I need to upgrade
    : this?. If not what is the impact on Windows NT?
    : 4. Is the majority still running smart client 10.7 and database
    : 7?
    : 5. What is the necessary time to implement these upgrades? What
    : type of consulting I need to have?
    : 6. I have some employees working on it? Will these changes
    : affect them?
    : What type of precautions I need to take on the whole??
    : Thank You
    : Madhavan
    Oracle Technology Network
    http://technet.oracle.com
    null

  • SAP Function Module Converting Stock UoM to the Billing UoM of the material

    Hi Guys,
    I'm looking for an SAP Function Module that can handle the automatic conversion of a material's Stock Unit of Measure into its Billing Unit of Measure.
    Any idea? 
    Thank you in advance.
    -allex

    Hi,
         Check this Function module
    OIU_QCI_CALC_BILLING_QUANTTIES
    Regards
    Bala Krishna

  • Material availability date can not be after the delivery date

    Dear Experts,
    we are using the following scnario,
    1. Once the user creates the sales order, automatically system creates PO in the background.
    we have created Bapi program for creation of Background PO in SD User Exit.
    The following issue occurs in Prd, DS1, QS1 server, We have done Technical upgradation project, Now when we creates sales order automatically po created with error message of Material availablity date can not be after the delivery date. even sales order no also not updated in the PO.
    QAS server (without technical upgrade) i refered the same input parameter and used the same and create the sales order system generates PO automatically without error message.
    Does any one can through lights on this issue,
    Thanks and Best Regards,
    Muralidharan S

    Hi
    The dates are determined due to shipping and transportation scheduling settings. So check whether the shipping and transportation scheduling is being performed as per the cofiguration settings after Technical upgrade. Since the MAD date should not be after Delivery date but it seems that the dates are not determined properly.
    Also check the Transit  time, Loading time, Pick/Pack time and Lead time are retained as same as before the technical upgrade. Use the QAS server settings to validate the settings in other servers.
    Regards
    Rajkumar K

  • GR Block if material received before the delivery date given in the P.O

    Hi,
    I want to know is there any setting if we receievd the material from the vendor before the delivery date given in the P.O, SAP should give the error messaage or warning message while making the GR of that material.
    regards,
       zafar

    In OMCQ ,  make message 00 M7 254   "Earliest possible delivery date is& "  as warning/ Error

  • Movement type to consume customer consignment stock in the delivery plant ?

    Need MM Functional expertise help to resolve the issue
    They are two plants associated
    1. Deliverying Plant (Customer Consignment Stock) ---> FPP
    2. Recieving Plant (Vendor Consignment Stock) ---> FNT
    Recieving Plant (FNT) will send a consignment Purchase Order (P0) to the delivery plant (FPP), which
    inturn delivery plant FPP will do post goods Issue (PGI) with movement type 635 {635 --> moves
    the stock from sloc 1000 to customer consignment stock}
    Once movement type 635 is completed, it will go customer consignment stock in the delivery plant FPP
    So Far OK..
    Recieving plant (FNT) will recieve the stock against movement type 101K into Consignment location, followed
    by movement type 411k (to move the stock from consignment location to OWN location).  Once its under OWN location,
    the inventory can be utilized for service orders (261)
    Issue:
    Not able to find a movement type to consume customer consignment stock in the delivery plant FPP
    Note: 1. 411k is used to consume vendor consignment stock
    2. Both plants are in different company codes
    Following OSS notes has been checked, but none is addressing the issue
    1. 520024
    2. 610896
    3. 362032
    4. 13006

    Customer consignment stock is consumed physically by a customer, the customer reports to you how much he has consumed, the delivering plant creates then a consignment order for consignment issue in the delivering plant, followed by converting it to a delivery and posting goods issue.

  • Material availability check not consider the MMBE stock correctly

    Dear Experts,
    Thanks for your continuous support.
    I have one clarification ,at the time of process order raised COR1 - Click Material availability check after that massage had come in all material check available , but system wise some of the Bill of materials having not stock in MMBE ? What is the reason for the issue, with out stock material also given the status ok in ATP.
    At the time of confirmation i have put some loss qty , where is the way of display in loss qty after that confirmation.
    I need the report for one month process order confirmation list with order qty, confirm qty, delivered qty, &Loss qty ? Loss qty details only i am seeing kindly give the guidance if any t.code for display loss qty against the process order.
    Thanks,
    N.Umapathy

    Hi N.Umapathy,
    "Click Material availability check after that massage had come in all material check available , but system wise some of the Bill of materials having not stock in MMBE ? What is the reason for the issue, with out stock material also given the status ok in ATP."
    There can be an available quantity even if there is no stock in MMBE for that material.
    A simple example:
    Production order created with component X.
    Component X has a required quantity of 100.
    There is no stock in MMBE for material X.
    However, there is a planned receipt of stock (maybe in the form of a purchase document for example) of 100.
    In this case, it is possible that the availability check will confirm 100 is available even if it is not in MMBE.
    Another contributor on here, Jürgen L has written a very good blog on this here:
    Unrestricted use stock not equal to available stock
    Hope this helps.

Maybe you are looking for