CR4E plug-in ERROR CONNECTIVITY MS ACCESS DATABASE :data connection that isn't fully supported by this version of the Crystal Reports designer

Post Author: arfetgas
CA Forum: Data Connectivity and SQL
Hi im trying to view a simple report , this report have some parameters from a MS Access database.I configure everything, The ODBCJDBC bridge, the dns System on Windows, etc... and the problem its like this, I connect the database, but the schema its empty , i cant map, the dinamic parameters of my report, with my access database.I have this errors : at same time 1. This report uses a data connection that isn't fully supported by this version of the Crystal Reports designer. You can modify the report in the designer, but the following actions that access this connection will fail: Browse data, verify database, and report preview. We recommend you set the datasource location to a JDBC or Java Result Set data source. 2. Java.lang.RuntimeException: WARNING: Blocked recursive attempt to close part com.businessobjects.crystalreports.integration.eclipse.jspeditor.CRJSPEditor while still in the middle of activating it at org.eclipse.ui.internal.WorkbenchPage.closeEditors(WorkbenchPage.java:1247) at org.eclipse.ui.internal.WorkbenchPage.closeEditor(WorkbenchPage.java:1367) at org.eclipse.ui.internal.EditorPane.doHide(EditorPane.java:61) at org.eclipse.ui.internal.PartStack.close(PartStack.java:543) at org.eclipse.ui.internal.EditorStack.close(EditorStack.java:206) at org.eclipse.ui.internal.PartStack$1.close(PartStack.java:122) at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation$1.handleEvent(TabbedStackPresentation.java:81) at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:267) at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:276) at org.eclipse.ui.internal.presentations.defaultpresentation.DefaultTabFolder.access$1(DefaultTabFolder.java:1) at org.eclipse.ui.internal.presentations.defaultpresentation.DefaultTabFolder$1.closeButtonPressed(DefaultTabFolder.java:67) at org.eclipse.ui.internal.presentations.PaneFolder.notifyCloseListeners(PaneFolder.java:596) at org.eclipse.ui.internal.presentations.PaneFolder$3.close(PaneFolder.java:189) at org.eclipse.swt.custom.CTabFolder.onMouse(CTabFolder.java:2159) at org.eclipse.swt.custom.CTabFolder$1.handleEvent(CTabFolder.java:320) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938) at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293) at org.eclipse.jface.window.Window.runEventLoop(Window.java:820) at org.eclipse.jface.window.Window.open(Window.java:796) at org.eclipse.ui.texteditor.AbstractTextEditor.handleEditorInputChanged(AbstractTextEditor.java:4403) at org.eclipse.ui.texteditor.StatusTextEditor.handleEditorInputChanged(StatusTextEditor.java:220) at org.eclipse.ui.texteditor.AbstractTextEditor.sanityCheckState(AbstractTextEditor.java:4555) at org.eclipse.ui.texteditor.StatusTextEditor.sanityCheckState(StatusTextEditor.java:210) at org.eclipse.ui.texteditor.AbstractTextEditor.safelySanityCheckState(AbstractTextEditor.java:4533) at org.eclipse.wst.sse.ui.StructuredTextEditor.safelySanityCheckState(StructuredTextEditor.java:2945) at org.eclipse.ui.texteditor.AbstractTextEditor$ActivationListener.handleActivation(AbstractTextEditor.java:921) at org.eclipse.ui.texteditor.AbstractTextEditor$ActivationListener.partActivated(AbstractTextEditor.java:879) at org.eclipse.ui.internal.PartListenerList$1.run(PartListenerList.java:72) at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37) at org.eclipse.core.runtime.Platform.run(Platform.java:857) at org.eclipse.ui.internal.PartListenerList.fireEvent(PartListenerList.java:57) at org.eclipse.ui.internal.PartListenerList.firePartActivated(PartListenerList.java:70) at org.eclipse.ui.internal.PartService.firePartActivated(PartService.java:73) at org.eclipse.ui.internal.PartService.setActivePart(PartService.java:171) at org.eclipse.ui.internal.WWinPartService.updateActivePart(WWinPartService.java:124) at org.eclipse.ui.internal.WWinPartService.access$0(WWinPartService.java:115) at org.eclipse.ui.internal.WWinPartService$1.partDeactivated(WWinPartService.java:48) at org.eclipse.ui.internal.PartListenerList2$4.run(PartListenerList2.java:113) at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37) at org.eclipse.core.runtime.Platform.run(Platform.java:857) at org.eclipse.ui.internal.PartListenerList2.fireEvent(PartListenerList2.java:53) at org.eclipse.ui.internal.PartListenerList2.firePartDeactivated(PartListenerList2.java:111) at org.eclipse.ui.internal.PartService.firePartDeactivated(PartService.java:116) at org.eclipse.ui.internal.PartService.setActivePart(PartService.java:165) at org.eclipse.ui.internal.WorkbenchPagePartList.fireActivePartChanged(WorkbenchPagePartList.java:56) at org.eclipse.ui.internal.PartList.setActivePart(PartList.java:126) at org.eclipse.ui.internal.WorkbenchPage.setActivePart(WorkbenchPage.java:3402) at org.eclipse.ui.internal.WorkbenchPage.requestActivation(WorkbenchPage.java:2946) at org.eclipse.ui.internal.PartPane.requestActivation(PartPane.java:265) at org.eclipse.ui.internal.EditorPane.requestActivation(EditorPane.java:98) at org.eclipse.ui.internal.presentations.PresentablePart.setFocus(PresentablePart.java:191) at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation$1.handleEvent(TabbedStackPresentation.java:92) at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:267) at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:272) at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.handleMouseDown(AbstractTabFolder.java:342) at org.eclipse.ui.internal.presentations.util.AbstractTabFolder$3.mouseDown(AbstractTabFolder.java:79) at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:178) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938) at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293) at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2389) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2353) at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2219) at org.eclipse.ui.internal.Workbench$4.run(Workbench.java:466) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:289) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:461) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:106) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:169) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:106) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:76) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:363) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:508) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:447) at org.eclipse.equinox.launcher.Main.run(Main.java:1173)!ENTRY com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788!MESSAGE Error loading file prueba.rpt!STACK 0java.lang.Exception: Error loading file prueba.rpt at com.businessobjects.integration.eclipse.shared.EclipseLogger.logMessage(Unknown Source) at com.businessobjects.integration.eclipse.shared.EclipseLogger.handleMessage(Unknown Source) at com.businessobjects.integration.capabilities.logging.LogManager.message(Unknown Source) at com.businessobjects.crystalreports.integration.eclipse.wtp.CrystalReportsValidator.validateOneFile(Unknown Source) at com.businessobjects.crystalreports.integration.eclipse.wtp.CrystalReportsValidator.validate(Unknown Source) at com.businessobjects.crystalreports.integration.eclipse.wtp.CrystalReportsValidator.validateInJob(Unknown Source) at org.eclipse.wst.validation.internal.operations.ValidatorJob.run(ValidatorJob.java:75) at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)!SUBENTRY 1 com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788!MESSAGE Plug-in Provider:.... Business Objects!SUBENTRY 1 com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788!MESSAGE Plug-in name:.... Crystal Reports Java Development Tools!SUBENTRY 1 com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788!MESSAGE Plug-in ID:.... com.businessobjects.crystalreports.integration.eclipse!SUBENTRY 1 com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788!MESSAGE Version:.... 1.0.4.v1094!SUBENTRY 1 com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788!MESSAGE The error was detected in com.businessobjects.crystalreports.integration.eclipse Please PEOPLE OF BUSINESS OBJECTS , I need some support , I think the problem its in your plug in09 April 2008 , let me how much time i need to wait Your support , maybe , ill try jasper Reports, or Birth, it depends on You people of BO any req -
> [email protected] thanks to people that can help ...

Similar Messages

Data connection that isn't fully supported by this version of the Crystal Reports designer

Post Author: arfetgas
CA Forum: JAVA
Hi im trying to view a simple report , this report have some parameters from a MS Access database.I configure everything, The ODBCJDBC bridge, the dns System on Windows, etc... and the problem its like this, I connect the database, but the schema its empty , i cant map, the dinamic parameters of my report, with my access database.I have this errors : at same time 1. This report uses a data connection that isn't fully supported by this version of the Crystal Reports designer.
You can modify the report in the designer, but the following actions
that access this connection will fail: Browse data, verify database,
and report preview. We recommend you set the datasource location to a
JDBC or Java Result Set data source. 2.
Java.lang.RuntimeException: WARNING: Blocked recursive attempt to close
part
com.businessobjects.crystalreports.integration.eclipse.jspeditor.CRJSPEditor
while still in the middle of activating it at org.eclipse.ui.internal.WorkbenchPage.closeEditors(WorkbenchPage.java:1247) at org.eclipse.ui.internal.WorkbenchPage.closeEditor(WorkbenchPage.java:1367) at org.eclipse.ui.internal.EditorPane.doHide(EditorPane.java:61) at org.eclipse.ui.internal.PartStack.close(PartStack.java:543) at org.eclipse.ui.internal.EditorStack.close(EditorStack.java:206) at org.eclipse.ui.internal.PartStack$1.close(PartStack.java:122) at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation$1.handleEvent(TabbedStackPresentation.java:81) at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:267) at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:276) at org.eclipse.ui.internal.presentations.defaultpresentation.DefaultTabFolder.access$1(DefaultTabFolder.java:1) at org.eclipse.ui.internal.presentations.defaultpresentation.DefaultTabFolder$1.closeButtonPressed(DefaultTabFolder.java:67) at org.eclipse.ui.internal.presentations.PaneFolder.notifyCloseListeners(PaneFolder.java:596) at org.eclipse.ui.internal.presentations.PaneFolder$3.close(PaneFolder.java:189) at org.eclipse.swt.custom.CTabFolder.onMouse(CTabFolder.java:2159) at org.eclipse.swt.custom.CTabFolder$1.handleEvent(CTabFolder.java:320) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938) at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293) at org.eclipse.jface.window.Window.runEventLoop(Window.java:820) at org.eclipse.jface.window.Window.open(Window.java:796) at org.eclipse.ui.texteditor.AbstractTextEditor.handleEditorInputChanged(AbstractTextEditor.java:4403) at org.eclipse.ui.texteditor.StatusTextEditor.handleEditorInputChanged(StatusTextEditor.java:220) at org.eclipse.ui.texteditor.AbstractTextEditor.sanityCheckState(AbstractTextEditor.java:4555) at org.eclipse.ui.texteditor.StatusTextEditor.sanityCheckState(StatusTextEditor.java:210) at org.eclipse.ui.texteditor.AbstractTextEditor.safelySanityCheckState(AbstractTextEditor.java:4533) at org.eclipse.wst.sse.ui.StructuredTextEditor.safelySanityCheckState(StructuredTextEditor.java:2945) at org.eclipse.ui.texteditor.AbstractTextEditor$ActivationListener.handleActivation(AbstractTextEditor.java:921) at org.eclipse.ui.texteditor.AbstractTextEditor$ActivationListener.partActivated(AbstractTextEditor.java:879) at org.eclipse.ui.internal.PartListenerList$1.run(PartListenerList.java:72) at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37) at org.eclipse.core.runtime.Platform.run(Platform.java:857) at org.eclipse.ui.internal.PartListenerList.fireEvent(PartListenerList.java:57) at org.eclipse.ui.internal.PartListenerList.firePartActivated(PartListenerList.java:70) at org.eclipse.ui.internal.PartService.firePartActivated(PartService.java:73) at org.eclipse.ui.internal.PartService.setActivePart(PartService.java:171) at org.eclipse.ui.internal.WWinPartService.updateActivePart(WWinPartService.java:124) at org.eclipse.ui.internal.WWinPartService.access$0(WWinPartService.java:115) at org.eclipse.ui.internal.WWinPartService$1.partDeactivated(WWinPartService.java:48) at org.eclipse.ui.internal.PartListenerList2$4.run(PartListenerList2.java:113) at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37) at org.eclipse.core.runtime.Platform.run(Platform.java:857) at org.eclipse.ui.internal.PartListenerList2.fireEvent(PartListenerList2.java:53) at org.eclipse.ui.internal.PartListenerList2.firePartDeactivated(PartListenerList2.java:111) at org.eclipse.ui.internal.PartService.firePartDeactivated(PartService.java:116) at org.eclipse.ui.internal.PartService.setActivePart(PartService.java:165) at org.eclipse.ui.internal.WorkbenchPagePartList.fireActivePartChanged(WorkbenchPagePartList.java:56) at org.eclipse.ui.internal.PartList.setActivePart(PartList.java:126) at org.eclipse.ui.internal.WorkbenchPage.setActivePart(WorkbenchPage.java:3402) at org.eclipse.ui.internal.WorkbenchPage.requestActivation(WorkbenchPage.java:2946) at org.eclipse.ui.internal.PartPane.requestActivation(PartPane.java:265) at org.eclipse.ui.internal.EditorPane.requestActivation(EditorPane.java:98) at org.eclipse.ui.internal.presentations.PresentablePart.setFocus(PresentablePart.java:191) at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation$1.handleEvent(TabbedStackPresentation.java:92) at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:267) at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:272) at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.handleMouseDown(AbstractTabFolder.java:342) at org.eclipse.ui.internal.presentations.util.AbstractTabFolder$3.mouseDown(AbstractTabFolder.java:79) at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:178) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938) at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293) at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2389) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2353) at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2219) at org.eclipse.ui.internal.Workbench$4.run(Workbench.java:466) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:289) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:461) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:106) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:169) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:106) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:76) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:363) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:508) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:447) at org.eclipse.equinox.launcher.Main.run(Main.java:1173)!ENTRY com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788!MESSAGE Error loading file prueba.rpt!STACK 0java.lang.Exception: Error loading file prueba.rpt at com.businessobjects.integration.eclipse.shared.EclipseLogger.logMessage(Unknown Source) at com.businessobjects.integration.eclipse.shared.EclipseLogger.handleMessage(Unknown Source) at com.businessobjects.integration.capabilities.logging.LogManager.message(Unknown Source) at com.businessobjects.crystalreports.integration.eclipse.wtp.CrystalReportsValidator.validateOneFile(Unknown Source) at com.businessobjects.crystalreports.integration.eclipse.wtp.CrystalReportsValidator.validate(Unknown Source) at com.businessobjects.crystalreports.integration.eclipse.wtp.CrystalReportsValidator.validateInJob(Unknown Source) at org.eclipse.wst.validation.internal.operations.ValidatorJob.run(ValidatorJob.java:75) at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)!SUBENTRY 1 com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788!MESSAGE Plug-in Provider:.... Business Objects!SUBENTRY 1 com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788!MESSAGE Plug-in name:.... Crystal Reports Java Development Tools!SUBENTRY 1 com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788!MESSAGE Plug-in ID:.... com.businessobjects.crystalreports.integration.eclipse!SUBENTRY 1 com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788!MESSAGE Version:.... 1.0.4.v1094!SUBENTRY 1 com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788!MESSAGE The error was detected in com.businessobjects.crystalreports.integration.eclipse Please PEOPLE OF BUSINESS OBJECTS , I need some support , I think the problem its in your plug in09
April 2008 , let me how much time i need to wait Your support , maybe ,
ill try jasper Reports, or Birth, it depends on You people of BO any req -
> [email protected] thanks to people that can help ...

Hi Wendy Fu,
Thanks for your feed back. I could see Microsoft.ReportViewer.ProcessingObjectModel.dll to add as reference to my project. Actually I can open generated rdlc in designer, at run time I get error. I could not make out where is the exact mistake out of three
options flashed.
The definition of this report is not valid or supported by this version of Reporting Services.
The report definition may have been created with a later version of Reporting Services
or contain content that is not well-formed or not valid based on Reporting Services schemas
Details: Data at the root level is invalid
My web config has following references
<add assembly="Microsoft.ReportViewer.WebForms, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
<add assembly="Microsoft.ReportViewer.Common, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
May be I have to change these versions to 9 or 10.
First I will try adding Microsoft.ReportViewer.ProcessingObjectModel.dll .
Once thanks for your reply.
Races

CR4E plug-in ERROR CONNECTIVITY MS ACCESS DATABASE :data connection that isn't fully supported by this version of the Crystal R

Hi im trying to view a simple report , this report have some parameters from a MS Access database.
I configure everything, The ODBCJDBC bridge, the dns System on Windows, etc...
and the problem its like this,
I connect the database, but the schema its empty , i cant map, the dinamic parameters of my report, with my access database.
I have this errors : at same time
1. This report uses a data connection that isn't fully supported by this version of the Crystal Reports designer. You can modify the report in the designer, but the following actions that access this connection will fail: Browse data, verify database, and report preview. We recommend you set the datasource location to a JDBC or Java Result Set data source.
2. Java.lang.RuntimeException: WARNING: Blocked recursive attempt to close part com.businessobjects.crystalreports.integration.eclipse.jspeditor.CRJSPEditor while still in the middle of activating it
    at org.eclipse.ui.internal.WorkbenchPage.closeEditors(WorkbenchPage.java:1247)
    at org.eclipse.ui.internal.WorkbenchPage.closeEditor(WorkbenchPage.java:1367)
    at org.eclipse.ui.internal.EditorPane.doHide(EditorPane.java:61)
    at org.eclipse.ui.internal.PartStack.close(PartStack.java:543)
    at org.eclipse.ui.internal.EditorStack.close(EditorStack.java:206)
    at org.eclipse.ui.internal.PartStack$1.close(PartStack.java:122)
    at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation$1.handleEvent(TabbedStackPresentation.java:81)
    at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:267)
    at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:276)
    at org.eclipse.ui.internal.presentations.defaultpresentation.DefaultTabFolder.access$1(DefaultTabFolder.java:1)
    at org.eclipse.ui.internal.presentations.defaultpresentation.DefaultTabFolder$1.closeButtonPressed(DefaultTabFolder.java:67)
    at org.eclipse.ui.internal.presentations.PaneFolder.notifyCloseListeners(PaneFolder.java:596)
    at org.eclipse.ui.internal.presentations.PaneFolder$3.close(PaneFolder.java:189)
    at org.eclipse.swt.custom.CTabFolder.onMouse(CTabFolder.java:2159)
    at org.eclipse.swt.custom.CTabFolder$1.handleEvent(CTabFolder.java:320)
    at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
    at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938)
    at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682)
    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293)
    at org.eclipse.jface.window.Window.runEventLoop(Window.java:820)
    at org.eclipse.jface.window.Window.open(Window.java:796)
    at org.eclipse.ui.texteditor.AbstractTextEditor.handleEditorInputChanged(AbstractTextEditor.java:4403)
    at org.eclipse.ui.texteditor.StatusTextEditor.handleEditorInputChanged(StatusTextEditor.java:220)
    at org.eclipse.ui.texteditor.AbstractTextEditor.sanityCheckState(AbstractTextEditor.java:4555)
    at org.eclipse.ui.texteditor.StatusTextEditor.sanityCheckState(StatusTextEditor.java:210)
    at org.eclipse.ui.texteditor.AbstractTextEditor.safelySanityCheckState(AbstractTextEditor.java:4533)
    at org.eclipse.wst.sse.ui.StructuredTextEditor.safelySanityCheckState(StructuredTextEditor.java:2945)
    at org.eclipse.ui.texteditor.AbstractTextEditor$ActivationListener.handleActivation(AbstractTextEditor.java:921)
    at org.eclipse.ui.texteditor.AbstractTextEditor$ActivationListener.partActivated(AbstractTextEditor.java:879)
    at org.eclipse.ui.internal.PartListenerList$1.run(PartListenerList.java:72)
    at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
    at org.eclipse.core.runtime.Platform.run(Platform.java:857)
    at org.eclipse.ui.internal.PartListenerList.fireEvent(PartListenerList.java:57)
    at org.eclipse.ui.internal.PartListenerList.firePartActivated(PartListenerList.java:70)
    at org.eclipse.ui.internal.PartService.firePartActivated(PartService.java:73)
    at org.eclipse.ui.internal.PartService.setActivePart(PartService.java:171)
    at org.eclipse.ui.internal.WWinPartService.updateActivePart(WWinPartService.java:124)
    at org.eclipse.ui.internal.WWinPartService.access$0(WWinPartService.java:115)
    at org.eclipse.ui.internal.WWinPartService$1.partDeactivated(WWinPartService.java:48)
    at org.eclipse.ui.internal.PartListenerList2$4.run(PartListenerList2.java:113)
    at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
    at org.eclipse.core.runtime.Platform.run(Platform.java:857)
    at org.eclipse.ui.internal.PartListenerList2.fireEvent(PartListenerList2.java:53)
    at org.eclipse.ui.internal.PartListenerList2.firePartDeactivated(PartListenerList2.java:111)
    at org.eclipse.ui.internal.PartService.firePartDeactivated(PartService.java:116)
    at org.eclipse.ui.internal.PartService.setActivePart(PartService.java:165)
    at org.eclipse.ui.internal.WorkbenchPagePartList.fireActivePartChanged(WorkbenchPagePartList.java:56)
    at org.eclipse.ui.internal.PartList.setActivePart(PartList.java:126)
    at org.eclipse.ui.internal.WorkbenchPage.setActivePart(WorkbenchPage.java:3402)
    at org.eclipse.ui.internal.WorkbenchPage.requestActivation(WorkbenchPage.java:2946)
    at org.eclipse.ui.internal.PartPane.requestActivation(PartPane.java:265)
    at org.eclipse.ui.internal.EditorPane.requestActivation(EditorPane.java:98)
    at org.eclipse.ui.internal.presentations.PresentablePart.setFocus(PresentablePart.java:191)
    at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation$1.handleEvent(TabbedStackPresentation.java:92)
    at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:267)
    at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:272)
    at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.handleMouseDown(AbstractTabFolder.java:342)
    at org.eclipse.ui.internal.presentations.util.AbstractTabFolder$3.mouseDown(AbstractTabFolder.java:79)
    at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:178)
    at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
    at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938)
    at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682)
    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293)
    at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2389)
    at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2353)
    at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2219)
    at org.eclipse.ui.internal.Workbench$4.run(Workbench.java:466)
    at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:289)
    at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:461)
    at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
    at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:106)
    at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:169)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:106)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:76)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:363)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:508)
    at org.eclipse.equinox.launcher.Main.basicRun(Main.java:447)
    at org.eclipse.equinox.launcher.Main.run(Main.java:1173)
!ENTRY com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788
!MESSAGE Error loading file prueba.rpt
!STACK 0
java.lang.Exception: Error loading file prueba.rpt
    at com.businessobjects.integration.eclipse.shared.EclipseLogger.logMessage(Unknown Source)
    at com.businessobjects.integration.eclipse.shared.EclipseLogger.handleMessage(Unknown Source)
    at com.businessobjects.integration.capabilities.logging.LogManager.message(Unknown Source)
    at com.businessobjects.crystalreports.integration.eclipse.wtp.CrystalReportsValidator.validateOneFile(Unknown Source)
    at com.businessobjects.crystalreports.integration.eclipse.wtp.CrystalReportsValidator.validate(Unknown Source)
    at com.businessobjects.crystalreports.integration.eclipse.wtp.CrystalReportsValidator.validateInJob(Unknown Source)
    at org.eclipse.wst.validation.internal.operations.ValidatorJob.run(ValidatorJob.java:75)
    at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
!SUBENTRY 1 com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788
!MESSAGE Plug-in Provider:.... Business Objects
!SUBENTRY 1 com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788
!MESSAGE Plug-in name:.... Crystal Reports Java Development Tools
!SUBENTRY 1 com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788
!MESSAGE Plug-in ID:.... com.businessobjects.crystalreports.integration.eclipse
!SUBENTRY 1 com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788
!MESSAGE Version:.... 1.0.4.v1094
!SUBENTRY 1 com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788
!MESSAGE The error was detected in com.businessobjects.crystalreports.integration.eclipse
Please PEOPLE OF BUSINESS OBJECTS , I need some support , I think the problem its in your plug in
09 April 2008 , let me how much time i need to wait Your support , maybe , ill try jasper Reports, or Birth, it depends on You people of BO
any req -
>   [email protected]
thanks to people that can help ...

There are some other solutions possible.
1. Get another driver. The only one known is java only so it wont crash. But is not not free.
2. Use a proxy driver. That means that another app actually does the database work. If it crashes you just start it again (which you can do in your main code.) That way it won't take down your server. There are commercial jdbc drivers that claim MS Access but are are really just proxy implementations as an option in this area.

HT203088 I have the CANON REBEL T5 1200D, and when i connect it to my mac which is 10.10 the new OS X YOSEMITE it says that it "Cannot be used with this version of the operating system" why does it say that?

I have the CANON REBEL T5 1200D, and when i connect it to my mac which is 10.10 the new OS X YOSEMITE it says that it "Cannot be used with this version of the operating system" why does it say that if my camera is listed under the supported digital cameras for OS X YOSEMITE?

Put simply, the minimum system requirements for iTunes have changed. You need a Mac running at least OS X 10.6.8.
It's best you look online to see if your model of Mac can be upgraded to at least 10.6.8 "Snow Leopard". It should still be possible to order a copy of Snow Leopard if so.

"uses a file type that is blocked from opening in this version" error message when opening a *.doc file with Word already running

Several customers running different versions of Office 2011 (14.4.1-14.4.5) on OSX varying from 10.7.5 to 10.9.5, running on various kinds of hardware (iMac/MacBook Pro/MacBook Air) of various ages are having issues opening *.doc files if the Word is already open. The error message that gets displayed is, "XXXX.doc uses a file type that is blocked from opening in this version"
When the customer tries to open the same file via File-Open, she gets "The file is locked for editing. you can open the file as read-only".
When trying to do so, she gets "Word cannot open this document. The document might be in use, the document might not be a valid Word document, or the file name might contain invalid characters".
If Word gets Force-quit, the same document opens without any problems.
1. Repairing Disk permissions was ran several times. and the volume was found to be OK.
2. I have noticed that in this scenario either deleting the normal.dotm or com.microsoft.word.plist (~/Library/Preferences) sometimes resolves the issue, sometimes it doesn’t. There is no pattern to follow. All versions of Office are affected, the fully updated and the non-updated ones.
3. I have tried completely removing the suite using Office 2011 Uninstall.app and/or Remove Office 2011 Uninstaller.pkg, then going through customer's library and manually removing all the Office references.
4. None of these systems had Office 2008 in the past.
Any help will be greatly appreciated.

Reboot both the Mac and the server. Word opens .DOC files and Excel opens .XLS files. As you have found out by copying the files to the computer. It is the connection between the 2 computer that is causing the error.

An error has occurred while attempting to load the Crystal Reports runtime in deployed applications

My reports use to work but now i'm getting the following error on all reports in all the applications on my server
An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.

Hi Willingtolearnja,
This forum is for TFS, I'd like to know whether you use TFS and your question is related to TFS. It would be better to let us know more details about your scenario if it's related to TFS. If not, you might need to open a new thread in the proper tech forum
that your project related for a better response.
However, from the error message, you might use the wrong configuration for x86/x64 mode. Please change the configuartion and try again. Check the links below for more information:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/82e23647-7116-424b-b437-df0cb2be083d/an-error-has-occurred-while-attempting-to-load-the-crystal-reports-runtime?forum=vscrystalreports
http://stackoverflow.com/questions/19286630/an-error-has-occured-while-attempting-to-load-the-crystal-reports-runtime
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error: 12705 Cannot access NLS data

I have just downloaded and installed 11.2 Express Edition + Oracle SQL developer on Windows 7 but when I tried to connect it returned me an error: 12705 Cannot access NLS data.
I tried to change NLS_LANG param in registry & skipped NLS settings bit it did not helped.
How to resolve this?

923110 wrote:
The previous locale was set to Russia
I have Win 7 32xAccording to Installation guide section 9, about supported language configurations, not many language message files are included.
But I suspect something else is going on here. You could try changing Windows OS back to Russian locale and do:
set nls_lang=russian_russia.cl8mswin1251
sqlplus / as sysdba
Fortunately, there are many people who are able to install successfully by simply adhering to the steps in this GuideAs indicated above, with Oracle at the very minimum you need to read and follow the Installation guide for the product.
Oracle Database is an extremely capable development and deployment platform for database centric applications. It is also vast and complex, so don't be suprised if you need to spend a couple of years to get well oriented with it. One of the first things a new user should do is to get familiar with the relevant Documentation library.

You can't use The following message is stopping me access my disk utility. 'this version of the application "Disk Utility" with this version of OS X.' not only that my Mac pro keeps dropping my internet connection and logs on to BT Open.

After installing Yosmite, The following message is stopping me accessing my disk utility. 'You can't use this version of the application “Disk Utility” with this version of OS X.' you have “Disk Utility” 12.1.1.
not only that my Mac pro keeps dropping my internet connection and logs on to BT Open.
Help

For whatever reason you don't have the Yosemite version of Disk Utility which is 13. I suggest you reinstall Yosemite.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Download and install the 10.10.1 update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Check that you have the current version of Disk Utility.

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.
Has anybody come across this error and found a fool-proof solution? I have found some stuff on the web but nothing seems to work. In particular this one on the Apple Help doesn't:
http://support.apple.com/kb/HT4700
I have a W2K3 server where the volume is. It's a new Mac with OSX 10.8 and is connecting with AFP (I don’t want to move to SMB yet). There are older Macs with lower OS and all of them work fine. I have checked all the basic stuff and it is set-up correctly (hosts file on Mac, network, etc.).
Any help greatly appreciated,
Cheers,
Ian

This may work for you:
http://www.zdnet.com/mavericks-smb2-problem-and-fixes-7000022519/

Reference to database and/or server name in '' is not supported in this version of SQL Server

Hello all
I am using C# and ADO.NET (native) - Visual Studio 2013.
I am always using full qualified queries like "SELECT * FROM [database].[schema].[table]"
Obviously there is a problem when doing this against SQL Azure,
I get the following error: "Reference to database and/or server name in '' is not supported in this version of SQL Server"
Interesting fact: With SQL Management Studio, the same query works.
I need to know if this error is really a true one or not.
If yes, I can quit using SQL Azure. I would need a SQL Server and not a partial SQL Server :-)
Thanks and best regards
Frank

Hi,
Here are my suggestions:
1. Use partially qualified queries, because:
a. from a security standpoint, you'd want to limit your login's access across the server instance
b. in order to achieve a even better, you should specify your database as the Initial Catalog directly in the SQL Connection.
If you take into account these practices, SQL Database doesn't come with any limitation from that point of view.
However, in regard to 'With SQL Management Studio, the same query works', this is actually only partially true because if you run that query agains ADO.NET, you'll actually end up in switching databases along the query which is obviously not permitted in
SQL Database since you're running in a hosted black-box version of SQL you're not managing. It's just like running the USE <dbname> command which obviously doesn't work.
Alex

Error on Data Flow Task MSSQL 2012 Clustered "Description: The version of Lookup is not compatible with this version of the DataFlow. "

We have an SSIS package that runs on clustered MSSQL 2012 Enterprise Nodes that is failing. We use a job to executer the package.
Environmental information:
Product - Microsoft SQL Server Enterprise: Core-based Licensing (64-bit)
Operating System - Microsoft Windows NT 6.1 (7601)
Patform - NT x64
Version - MSSQL Version 11.0.3349.0
Package is set to 32 -bit. All permissions verified. Runs in lower environments, same MSSQL version. All environments are clustered. In the failing environment, all nodes are at the same service pack. I have not verified if all
nodes in the failing environment have SSIS installed. Data access is installed. We have other simpler packages that run in this environment, just not this one. Time to ask the community for help!
Error:
Source: Data Flow Task - Data Flow Task (SSIS.Pipeline) Description: The version of Lookup is not compatible with this version of the DataFlow. End Error Error: Code: 0xC0048020
Description: Component "Conditional Split, clsid {7F88F654-4E20-4D14-84F4-AF9C925D3087}" could not be created and returned error code 0x80070005 "Access is denied.". Make sure that the component is registered correctly. End Error
Description: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "Conditional Split;Microsoft Corporation; Microsoft SQL Server; (C) Microsoft Corporation; All Rights
Reserved; http://www.microsoft.com/sql/support;0". End Error
(Left out shop specific information. This is the first error in the errors returns by the job history for this package. )
Thanks in advance.

Hi DeveloperMax,
According to your description, the error occurs when you execute the package with Agent job on clustered MSSQL 2012 Enterprise Nodes.
As per my understanding, I think this issue can be caused by you use SQL Server Agent to schedule a SQL Server Integration Services package in a 64-bit environment. And the SSIS package is referencing some 32-Bit DLL or 32-Bit drivers which are available
only in 32-bit versions, so the job failed.
To fix this issue, we should use the 32-bit version of the DTExec.exe utility to schedule the 64-bit SQL Server Agent to run a package. To run a package in 32-bit mode from a 64-bit version of SQL Server Agent, we can go to the Job Step dialog box, then
select “32 bit runtime” in the Advanced tab.
Besides, we should make sure that SQL Server Integration Services is installed on the failing environment.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to connect to the Crystal Reports Server XI R2 installed in other machi

Hi,
we are 3 people here we have Crystal Reports Server XI R2 installed in one machine and Crystal Repoprts XI DEsigner ( downloaded trial version) in all the machines ,
in my machine only Crystal Repoprts XI DEsigner ( downloaded trial version) is installed , how to connect to the Crystal Reports Server XI R2 which is installed in other machine
Regards,
kathyaini

Hi,
thankyou for your response,
my problem here is as soon as i open CR Designer , and if i click on either New Report,Blank Report, or standard report wizard it is saying "failed to create database connection"
on which ever thing i click it is telling the same "failed to create database connection" i created the user DSN properly , i could not create System DSN i dont know why.
can u please guide me
and one more thing on the machine where CR server is installed , on the same machine designer is also installed (i think u was telling the same) . my question is how the server will know about the CR Designer installed in my machine.
Regards,
kathyaini

How to set database location in the crystal report X1 from the Source code.

Dear All,
I am using Crystal report X1 for report generation.Now I am setting the database location manually in the crystal report. How can I Set the database location from the Source code.
Awaiting for your reply.
Thanks in advance.
Regards,
Rahaneef T

Here's a routine that also searches for subreports to set the log on info. Simply remove that aprt to set the main report logon info:
IDatabaseTablePtr pTable;
//get first table
pTable = m_Report->Database->Tables->GetItem(1) ;
long lTableCount = m_Report->Database->Tables->Count;
for( long lTable=1; lTable<=lTableCount; lTable++ )
     pTable = m_Report->Database->Tables->GetItem(lTable);
     pTable->ConnectionProperties->DeleteAll();
     pTable->ConnectionProperties->Add("DSN", "Name of your DSN");
     pTable->ConnectionProperties->Add("Database", "Demo");
     pTable->ConnectionProperties->Add("Password", "sa");
     pTable->ConnectionProperties->Add("User ID", "1Oem2000");
// Log on the tables of the subreports.
long lSectionCount = m_Report->Sections->Count;
for( long lSection=1; lSection<=lSectionCount; lSection++ )
     ISectionPtr pSection = m_Report->Sections->Item[lSection];
     long lSubreportCount = pSection->ReportObjects->Count;
     for( long lSubreport=1; lSubreport<=lSubreportCount; lSubreport++ )
          IReportObjectPtr pSubreportObject = pSection->ReportObjects->Item[lSubreport];
          CRObjectKind crObjectKind;
          pSubreportObject->get_Kind(&crObjectKind);
          if( crObjectKind == crSubreportObject )
               ISubreportObjectPtr SubReportPtr = pSubreportObject;
               IReportPtr pSubReport = SubReportPtr->OpenSubreport();
               long lTableCount = pSubReport->Database->Tables->Count;
               for( long lTable=1; lTable<=lTableCount; lTable++ )
                    pTable = m_Report->Database->Tables->GetItem(lTable);
                    pTable->ConnectionProperties->DeleteAll();
                    //pTable->ConnectionProperties->Add("DSN", "dwcb12003");
                    pTable->ConnectionProperties->Add("Database", "CrystalEport_DB");
                    pTable->ConnectionProperties->Add("Password", "sa");
                    pTable->ConnectionProperties->Add("User ID", "1Oem2000");
If that doesn't work you need to tell us what is the error you are getting and paste in the code you are using.

TS3771 My iTunes U no longer works since the update, an error message pops up saying that "This movie requires QuickTime, which is not supported by this version of iTunes." I followed the tutorial that suggests to change to from 64 to 32 bit and it didn't

iTunes U video files no longer work on my computer since i update to Mavericks. The following message appears on the screen "This movie requires QuickTime, which is not supported by this version of iTunes." I followed a tutorial that suggested to go to Applications/iTunes/Get Info and change to 32 bit. Now my iTunes does not open at all, it says it requires 64 bit. I am a bit confused and disappointed. What should I do to get it fixed? Buy a new MacBook?

Marcello, I am having the same problem. When following the advice of many in the community to start iTunes in 32-bit mode, I get the following error after I have done so:
I am running 10.9.2 on a mac mini.
I am hoping this will be fixed or at least a solid answer could be given that iTunes will no longer support certain types of media going foward.

Error message, "Movie needs Quicktime, which is not supported by this version of iTunes

Since itunes 12 has been downloaded, I can't play any movies or trailers due to an error message or "the movie requires Quicktime which is not supported by this version of iTunes. I have Quicktime, but it still can not play both downloaded content and movies I want to preview. Can you help?

iTunes for Mac: Older media files may require iTunes to reopen in 32-bit mode - Apple Support

CR4E plug-in ERROR CONNECTIVITY MS ACCESS DATABASE :data connection that isn't fully supported by this version of the Crystal Reports designer

Similar Messages

Maybe you are looking for