Crash or error when burning

Hi all
Using PRE8.  Worked great for the first few burns, now I added a new disc menu (general - grid) and some memnu markers.
Now when I go to burn a disc...when it gets to the part where it actually burns to the DVD it says device not suitable...or something to that effect.  Just tried again and the whole thing crashed.  Strange thing is its worked for the last few days.
help
thanks

interestingly I went back to v7 of my project, one I know worked, put in a maxwell -r disc and it worked.  then went to my current v12 (i save every few hours as a habit) and put in the maxwell -r and it failed.  same place, about 96%, same error.
I also got this "
Premiere element has encountered an error
…\..\src\file cache\file cache.cpp-857"
I', now going to try v8,  v9, v10 etc to see if i can build on one that worked.
help :-)
Cheers

Similar Messages

  • Power calibration error when burning?

    I get a power calibration error when burning from IDVD.
    Any suggestions as to how to fix it?

    Basically a power calibration is the drive writes to the blank and then tries to read it back and adjusts the laser power accordingly to get a proper burn. So there are a number of reasons you might get this problem.
    One is the media itself. A bad disc or poor quality media might give you this error.
    Next, you may have a dirty laser and running on of those cleaning CDs (they have little brushes on them to dust off the laser) might do the trick.
    Third, could be a laser on the drive is giving up the ghost. Hopefully it is not the last one.
    Patrick

  • Unknown error when burning disc

    I get an unknown error when burning playlists to blank discs.  My computer begins to write the discs, but stops after a song or two. 

    Could you post your diagnostics for us please?
    In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

  • Memory allocation error when burning in premiere elements 2

    I have premiere elements 2. I happily burnt a version of my dvd then suddenly it stopped burning and I had the above message during the burning section of the process. My computer has adequate memory to run this programme and nothing new has been added. I then downloaded Premiere elements 7 as a trial and burnt this Dvd yesterday. However today it won't burn through 7 either so i am reluctant to upgrade unnecessarily. Can anyone shed light on why I receive this error message.
    Other things seem to burn but I am beginning to receive messages that Adobe is low generally on memory allocation.
    Regards
    Erika

    memory allocation error when burning in premiere elements 2
    Erika Lindsay - 09:30am Jan 4, 2009 Pacific
    I have premiere elements 2. I happily burnt a version of my dvd then suddenly it stopped burning and I had the above message during the burning section of the process. My computer has adequate memory to run this programme and nothing new has been added. I then downloaded Premiere elements 7 as a trial and burnt this Dvd yesterday. However today it won't burn through 7 either so i am reluctant to upgrade unnecessarily. Can anyone shed light on why I receive this error message.
    Other things seem to burn but I am beginning to receive messages that Adobe is low generally on memory allocation.
    Regards
    Erika

  • InDesign CS3 crashes without error when opening any 2nd InDesign file

    Issue: InDesign CS3 crashes without error and remains resident in memory if we have an InDesign file open and attempt to open a second InDesign file.
    OS: Win XP SP2
    InDesign Version: 5.0.2
    Hardware: Dell Precision WorkStation T3400, 4 gigabytes of memory, Intel Core2 Quad processor Q6600
    Details: No messages in the event viewer about the problem. We renamed the InDesign Defaults and the InDesign Saved Data file. We removed Creative Suite, restarted and then reinstalled Creative Suite (I could not remove and reinstall InDesign individually). We have created a new Windows profile for this user. I have one computer having the trouble. Other InDesign installations are working fine. This computer has 559 files in C:\windows\fonts. Other people that are not having the problem have a larger number of fonts installed.
    The issue is not file specific. We are not running out of memory as I checked the task manager after the first InDesign document is open.
    Why is opening a second document different than opening the first document?

    Hello Peter and Josh,
    I'd just like to assert that I am having the exact same problem as Josh. I've spent the time to go through the steps listed above and have found the same results.
    The issue as we see it multiple times daily is as follows:
    (1) User opens File1 (everything works fine)
    (2) User goes to open File2 (via explorer or via file->open) or print File1
    (3) The User Interface for ID disappears (InDesign.exe still appears in Task Manager and is NOT listed as "Not Responding", ID does not appear in the Task Bar)
    (4) The only way to continue work is to End Task/End Process InDesign.exe and relaunch.
    No error messages appear, no error logs are created(that I can find). Non-related concerns caused us to upgrade this users PC. With a completely new install we are still having the problems. The systems are listed as follows:
    OS: Win XP SP2 (fully updated minus SP3)
    InDesign Version: 5.0.2
    Newest Hardware: Custom Built Computer, 4GB RAM installed (3.24 recognized by windows), Intel Core2 Quad processor Q6600 @ 2.4Ghz
    OS: Win XP SP2 (fully updated minus SP3)
    InDesign Version: 5.0.2
    Older Hardware: Custom Built Computer, Intel D945GTP Motherboard, 2GB RAM installed, Intel Pentium D processor @ 2.8Ghz
    Troubleshooting:
    (1) Alt+Space and M then using arrow keys moves every other window the user had opened other than In-Design. The user has two monitors. (a) 1280x1024 and (b) 1200x1600 (yes she uses the monitor rotated 90 degrees
    (2) Log files - Non exist in the C:\Program Files\Adobe\Adobe InDesign CS3 folder. I've also done a search across the entire hard drive for any "*.log" files, none of which were adobe related.
    (3) Default Printer - Changing the default printer to Adobe PDF is not really an option. I was able to convince the user to temporarily switch to a different networked printer and await the results (most likely today or tomorrow it should recreate)
    (4) /3GB switch - Getting that last 700 something MB of memory isn't an issue. I've run MemTest.exe on all the available system memory overnight in a "burn in" test. The system ran fine the sticks were nice and warm when I got in from all the hard work :)
    (5) Order of Opening - The problem repeates regardless of order. The trick seems to be opening File2 or printing File1 (I had the user only work on one file at a time (required her to close any open files before opening the next, that wasn't fun for my user but the system didn't crash on opening in this scenario, just on printing. Obviously not a permanent work around)
    Any help here would be much appreciated as this has been plaguing us for months now.

  • Error when burning DVD - no plugin DLLS

    When burning a DVD I get an error message that says Plugin Coder error : no plugin DLLS.  Why is this happening and how can I fix it?

    They do but aren't cheap.
    Look at SuperMediaStore.
    You might be able to find them cheaper. I was just checking to see if they make them.

  • Hardware Error when burning DVD's

    I keep getting an error message when burning DVD's using Toast Titanium on my iMac..it reads:
    "Drive Reported an error, Sense key = hardware error, sense code = 0 x 03."
    Twice after getting that message I couldn't continue to burn and it stopped, once it did continue to burn and finished successfully. Any ideas, anyone?
    17" iMac G5 w/ iSight   Mac OS X (10.4.3)   upgraded to 1GB RAM

    I get the same message today when burning from Toast 7.02 on my iMac. It happened when I was trying to make an audio CD from my iTunes collection (not when Copying from CD to CD). The exact message I got in the middle of my burn was:
    The drive reported an error:
    Sense Key = hardware Error
    Sense Code = 0x03, 0x01
    I tryed again with another CD and got the same thing. I never had a problem with these CD's (TDK CD-R up to 48x).
    I wonder if there has to be some sort of software upgrade fro Roxio Toast or is this a superdrive malfunction/etc. My Superdrive gets very loud during this burn as well. I may take it in to Apple Genius Bar. Any ideas?

  • Hardware Error When Burning a CD or DVD

    I keep getting the following error when I try to burn a CD or DVD via my internal burner....
    The drive reported an error:
    Sense Key = HARDWARE ERROR
    Sense Code = 0x09, 0x02
    FOCUS SERVO FAILURE
    Using Toast 6 Titanium 6.0.7
    Any suggestions.....?

    lakewoodlawnman wrote:
    Check on firmware update for your drive and different media is where I would start.
    I think it may be a media problem as well...on numerous occasions when I insert a blank CD the drive will spin a few times the eject the CD....
    I'm guessing I can find the firmware update via the Apple Support section..?
    George Peters wrote:
    I would upgrade your Toast software to the latest because the version you are currently running is not coded to run on an Intel Mac or even 10.4 for that matter. Toast 6.1 was the first version compatible with 10.4 and Toast 7.1 was the first Intel compatible version.
    George
    Thx...I was not aware I needed Toast 7.1....my current version has worked in the past so I thought I was OK....

  • HELP! OOstatus error=- 47, ERROR WHEN BURNING

    I am getting an error that states "osstatus error = -47" when I try to burn a disc, does anyone know the workaround for this??
    I am using 2ghz intel core 2 duo macbook
    thanks in advance!

    dicktatorsmith
    We first need to determine what program is involved and the details of what you are doing?
    You cannot burn your content to DVD disc (assumed DVD-VIDEO on DVD disc) with just Photoshop Elements and its associated Elements Organizer? So, if you are getting this error in your burn to disc, I am suspecting that you are not working with Photoshop Elements.
    So, what program and version of it are you working with and on what computer operating system is it running?
    The error that you present at burn has been seen before with no one description of what it means (that I have ever seen). Sometimes defragmentation of the computer hard drive and/or using another brand/type DVD disc resolves the issue. If you are in Premiere Elements burn dialog, does hitting the Rescan button a few times have any impact on the situation?
    http://helpx.adobe.com/premiere-elements/kb/troubleshoot-system-errors-freezes-burning.htm l
    Please review, consider, and then let us know the outcome.
    Thank you.
    ATR

  • Error when burning disc

    When burning cds on iTunes, the playlist is checked and then it starts and sounds like it is burning, but then cancels after several minutes and spits the cd back out. Says that the function can not be completed. Unknown error number 4000 or 4002. ???

    Hi Michelle,
    You are posting in the ITunes for Apple/Mac. Try the iTunes Window group. I am sure you will get a better answer there.
    Or buy a Mac and come on back. Just kidding.
    MJ

  • Error when burning DVDs

    I get a L-EC uncorrectable error. (0x11, 0x5.) error when trying to burn a very short (30second) movie onto DVD. The DVD ejects and, when it next is inserted, doesn;t appear on the desktop. Any ideas boffins???

    Try Verbatim DVD+R disks. If they burn it's the media and with Sony DVD-R I suspect it's likely to be the disks.

  • Get a kranscoding error when burning home movies to disk

    Transcoding error when buring to disk

    You will find best advice over on the video forum. Most of us here are photographers.
    Click on the link below and copy and paste your question again. Good luck.
    Video questions: Click here for Premiere Elements Forum

  • Runtime error when burning blu ray disc

    I am attempting to burn a 1080i/29.97 blu ray disc and when it gets to something like 99% finished, i get a runtime error, and then
    encore crashes. Could it be there there is not enough space on the disc? The video and audio combine to somthing like 23.5 GB.
    Any help would be greatly appreciated.Also, running encore 4.0.

    This Adobe KB Article might be able to give you some tips.
    Good luck,
    Hunt

  • Error when burning disc image

    An error occurred when I tried to burn a disc image of a DVD slideshow. The slideshow has 324 slides in it and is almost 38 minutes long at the moment. I have added sound by creating a sound track in iMovie using a combination of songs downloaded from iTunes and tracks from my own CDs then blending the two blending the two. The slideshow plays on the computer and I have burned a disc image two or three times as I was creating it.
    Any advice?

    I have burned a disc image two or three times as I was creating it.
    Can you clarify what you did exactly? You mean you saved the project as a disk image, then went back and did further work on the project?
    The audio tracks you imported from iTunes may have been copy protected and will not burn in iDVD. The workaround is to burn those tracks to an audio CD in iTunes, then re-import into iTunes from that CD. Then will transfer to iMovie and iDVD without problems.
    Also, something here may help:
    iDVD: Slideshow error while rendering or encoding
    http://support.apple.com/kb/TS2303

  • Error when burning DVD

    I just bought a Mac a few weeks ago, and have had some trouble burning DVD's. I have a G5 running 10.3.9, with a Pioneer Superdrive. I try to burn an image in Disk Utility, but get the error message "The disc is reserved for exclusive use by another application". When I try just burning files using finder, it says "This disc cannot be used". I have tried DVD-R and DVD+R. Anyone have any ideas?
    Thanks!

    Hi macaboo
    Welcome to apple discussions. Just to add to the already excellent advice kindly provided to you by Fred Shippey;
    I too have one or two suggestions:
    First is to delete the plist for iDvd (but first quit the app). The plist is located in your preferences folder and looks like this (assuming the app has been launched at least once):
    com.apple.iDvd.plist
    Now try your iDvd project again. But if that too fails then ...
    Delete encoded assets from the Advanced menu tab and then try the burn again.
    That procedure looks like this. Hope this helps but if not just come on back. Good luck.
    Click Here
    Message was edited by: SDMacuser

Maybe you are looking for