Crazy can't export PDF with same name problems
I am experiencing a a very odd problem using:
ID CS4 6.0.6
Acrobat Pro 9.4.3
After running numerous tests, I've found that if I export a PDF from ID and select it in Finder...not open it...just highlight the darn file, ID will refuse to re-export that file with the same name saying I don't have perms or the file is in use. Since when does selecting a file in Finder constitute "in use?"
I can export every other format while the file is selected in Finder.
Is this normal? I have to deselect a PDF in Finder before saving a file of the same name?
Neglected to mention:
MacBookPro running OSX 10.6.7
If running OSX 10.6.7
I think it is due to your Finder settings.
Using column view the .pdf file is generating a preview in the right column, thus it is in use and cannot be overwritten.
Try changing to list view and it is no longer in use.
Yes it is annoying when you prefer column view.
Nina Storm
Similar Messages
-
Import and Export variables with same name
The nco3 throws and exception when a function has Import and Export variables with the same name.
An example is BAPI_BATCH_CREATE.
At the moment my solution is create a ZBAPI_BATCH_CREATE that wraps the original BAPI but has diferent names for import and export variables (IBATCH and OBATCH for BATCH variable).
Anyone has another more clean solution?
VB.NET CODE:
pFunct = foRFCDest.Repository.CreateFunction(fsFunctionName)
This is the error message:
SAP.Middleware.Connector.RfcInvalidStateException was unhandled
Message=Lookup of function BAPI_BATCH_CREATE metadata failed for destination SAPTST
Source=sapnco
StackTrace:
en SAP.Middleware.Connector.RfcRepository.LookupFunctionMetadataClassic(String name)
en SAP.Middleware.Connector.RfcRepository.LookupFunctionMetadata(String name)
en SAP.Middleware.Connector.RfcRepository.GetFunctionMetadata(String name)
en SAP.Middleware.Connector.RfcRepository.CreateFunction(String name)
en SapNetConnectorWrapper.FunctionBase..ctor(RfcDestination foDest, String fsFunctionName) en C:00_Compac201101_LibreriasSapNetConnectorWrapperFunctionBase.vb:línea 11
en SapNetConnectorWrapper.BAPIS.Bapi_Batch_Create..ctor(RfcDestination foDest) en C:00_Compac201101_LibreriasSapNetConnectorWrapperBAPISBapi_Batch_Create.vb:línea 16
en clsEtiquetadoTNPCommon.BLLEtiquetadoTNP.CrearLote(DynamicSqlEntity& foRegCabecera, DynamicSqlEntity& foRegNotificacion) en C:00_Compac201100_EtiquetadoTNP_PTEtiquetadoTNP_PTclsEtiquetadoTNPCommonBLLEtiquetadoTNP.vb:línea 515
en clsEtiquetadoTNPCommon.BLLEtiquetadoTNP.CrearLotesPendientes() en C:00_Compac201100_EtiquetadoTNP_PTEtiquetadoTNP_PTclsEtiquetadoTNPCommonBLLEtiquetadoTNP.vb:línea 602
en WAEtiquetadoTNP.Form1.Timer1_Tick(Object sender, EventArgs e) en C:00_Compac201100_EtiquetadoTNP_PTEtiquetadoTNP_PTWAEtiquetadoTNPForm1.vb:línea 25
en System.Windows.Forms.Timer.OnTick(EventArgs e)
en System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
en System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
en System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
en System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
en System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
en System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
en System.Windows.Forms.Application.Run(ApplicationContext context)
en Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()
en Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
en Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)
en WAEtiquetadoTNP.My.MyApplication.Main(String[] Args) en 17d14f5c-a337-4978-8281-53493378c1071.vb:línea 81
en System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args)
en System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args)
en Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
en System.Threading.ThreadHelper.ThreadStart_Context(Object state)
en System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
en System.Threading.ThreadHelper.ThreadStart()
InnerException: SAP.Middleware.Connector.RfcInvalidParameterException
Message=Cannot add BATCH to FUNCTION BAPI_BATCH_CREATE: an element with that name already exists
Source=sapnco
StackTrace:
en SAP.Middleware.Connector.RfcContainerMetadata`1.AddElement(T element)
en SAP.Middleware.Connector.RfcFunctionMetadata.AddParameter(RfcParameterMetadata parameterMetadata)
en SAP.Middleware.Connector.RfcRepository.LookupFunctionMetadataClassic(String name)
InnerException:Hi Raul
Even I am getting the same error for below BAPI
Lookup of function BAPI_FAMILY_CREATE metadata failed for destination
Inner Exception: Message "Cannot add EMPLOYEENUMBER to FUNCTION BAPI_FAMILY_CREATE: an element with that name already exists" string
I am using the new NCO 3.0.2.0 x64 version.
Is there any other solution other than creation of Z BAPI. -
Can't import project with same name as previously deleted project
I had a project in Flash Builder that I needed to update; the old version was a Flash Professional project using an FLA, but the new version uses XFL and a different folder structure. I right clicked on the old project in Flash Builder and selected "Delete" then chose the "Do not delete contents" option. I then renamed the project folder and put the new version of the project, with the same folder name, in the same location.
Flash Builder will not let me import the new version of the project. It will take me through the import wizard but when it completes nothing shows up in Flash Builder. Almost seems like there is a "permanently ignore projects with this name forever" flag hidden somewhere, although I'd hope FB wasn't that inflexible. Does anyone know how to solve this problem? Thanks.Eclipse has severe problems with case sensitivity in project names, and will silently crash if the name of a project changes in case. Apparently even if you delete the project and recreate it. So I had to change the capitalization to match the previous version.
-
Request.getparameter with same name problem
hi all ,
can u please help me,
my code ->
<form>
<input type= "hidden" name= "mid" id = "mid" value = "search" />
</form>
and m redirecting this jsp to another with url
showDetails.jsp?mid="hello";
String str[] = request.getParameterValues("mid");
this str contains only hidden parameter value ie. search
but i also want value appended to url
can u please tell me how thats possible ?
i don't want to use request.queryString() that is not a good answer.
please tell meIf you want to assign multiple parameter values to the same parameter name in a query string, you need the array notation. E.g. foo.jsp?name[]=value1&name[]=value2
-
Export single-page pdfs with page name
I've been looking for a script that:
- exports every page of an indesign file to a seperate single-page pdf (or other filetypes)
- names the pdf with the name of a page -> this is the hard part to find
The reason i could use it: i have a 200+ page file with productspecs. I would like to export every page with the correct productname. (extracting pdfs in acrobat is not a problem, but then i have to manually rename every file)
I'm not sure how to name the pages, as it's not a function in indesign. Ideal would be to be able to "tell" indesign: this textframe = the pagename, so it wouldn't be necessary to label the page seperately.
I'm not a scripter. I searched the forum and found some info on this already, but not a working script including automatic pagenaming.
I did found an old post where someone points to such a script, but i can't find it:
http://www.techplex.net/postsm40018_possible-to-name-pages.html#post40018
Did anyone ever made/found/used such a script?
(btw, a similar script for illustrator artboards would be very useful too!)
Any help appreciated!scott zanelli made one years ago. does a fantastic job.
http://indesignsecrets.com/page-exporter-utility-peu-5-script-updated-for-cs3.php
Loic Aigon has written one...
http://www.loicaigon.com/blog/?p=876
as for illustrator artboards... don't know - have a look on the illustrator scripting forum. -
Can I run 2 different domains with same name but on 2 different machines?
I am trying to setup 2 domains with same name (sharedcds1) on 2 different machines (Machine1 and Machine2).
When I start the weblogic managed server 1 (sharedcds1managedserver1) on Machine2, it throws an error saying it has some conflicts with the managed server 1 running on Machine1. How did the managed server of one machine know about the other server. Can I run 2 different domains with same name but on 2 different machines?
Here is the error in the log -
<Jun 14, 2005 10:53:29 AM EDT> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an
object under the name weblogic.transaction.coordinators.sharedcds1managedserver1 in the JNDI tree.
The object from 4596206652609838848S:130.170.61.153:[9505,9505,-1,-1,9505,-1,-1,0,0]:sharedcds1:s
haredcds1managedserver1 is non-clusterable, and you have tried to bind more than once from two or m
ore servers. Such objects can only be deployed from one server.>
<Jun 14, 2005 10:53:29 AM EDT> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an
object under the name weblogic.transaction.coordinators.sharedcds1managedserver1 in the JNDI tree.
The object from 8842351474821025197S:130.170.61.154:[9505,9505,-1,-1,9505,-1,-1,0,0]:sharedcds1:s
haredcds1managedserver1 is non-clusterable, and you have tried to bind more than once from two or m
ore servers. Such objects can only be deployed from one server.>
Thanks
SatishYes you can. Make sure that domains configured to use different multicast address. WLS uses multicast for communications between nodes in domain.
although your configuration will work, you could have troubles if you going to execute inter-domain calls between domains/servers with the same names. -
How can OIM provision users with same Display Name in AD?
I can create users with same First Name, Middle Name and Last Name (same Display Name) in OIM if they have different UserId.
But I can not provision two users with same Display Name to one Organization Unit in AD, the resource provisioning shows
Status: Rejected
Response: AD user already exists
Can AD be configured to create users with same Display Name (different UserId) in one OU, or would I have to create logic in OIM to modify the display name so it gets accepted by AD?
Thanks!Thanks Nitesh. Also, I can create the user with same DN in different OU's, not in same OU.
I agree once we determine that same cn exists in one OU , I can modify the display name by appending a number at the end or something. I understand the logic but I need more details on how to specify this logic in the pre-pop adapter, can you please share more details.
Thanks a lot! -
Can i have xml elements with same name but one is having attrbt..?
Hi all,
I am suppose to take input from one system into BPEL.That system is auto gererating xml file. But that file is strange. It has two xml element with
same name but with completely different sequence. First one is having two comlexTypes while second is having 5 simple types.
Now the difference is First element is having attribute while second is not.
So is that file is correct.?
thanks a lot.
/mishitcan you post the file? or load the file into JDeveloper and check the syntax or use XMLSpy for validation of the XML.
-
Can i rejoin ny SCVMM 2012 server to domain with same name & IP address?
Dear all..
I am in situation where i have to rejoin my scvmm server to domain with same name & ip address.one of the fool admin has deleted my SCVMM's computer object from AD. I have recreated the object & tried to log on but no luck.. i have to rejoin
the server.
Does it have any risks involved or its just fine?Hi,
First the behavior is normal. If an computer accounts is deleted, you cannot continue using the server without rejoining.
SCVMM it's not depending (integration) on active directory in such way as Exchange.
So, if the computer accounts has been deleted, there is no issue in creating a new one and rejoin the server. As long as the application on the server is able to look up any required directory services, it should be happy again.
Best Regards,
Jesper Vindum, Denmark
Systems Administrator
Help the forum: Monitor(alert) your threads and vote helpful replies or mark them as answer, if it helps solving your problem. -
Error "Failed to Export PDF" with big image on CS6 (32) and CC (64)
Hi everyone,
I'm on indesign CS6 (v8.0.2) and when I try to export pdf with a very big image ( *.tiff, 25000*35000 pixels, ) , the action failed with this message :" Failed to export a PDF".
To be sure that there is no any corrupted elements, I made a very simple layout (one page , and just one element for my image,I turnoff prefilgth and all ressource intensive options, and export with no downsampling or resampling) and try to export with different size image:with 20000*30000 -or smaller -image the export works, always failed with image .The export failed to in scripting mode.
If I diveded my image in four , the export works but this solution is not convenient (I actually made tests for a fully automatised process, and we want to be sure that the indesign component is enough "safe")
I try the same action with an evaluation version of indesign CC 64 bits (v9.2) and have the same behavior.
I can imagine that there is a memory issue there, but my config seems to be strong ( windows server 64 with 16GB ram, DD with more than 100GB free). I don't undersant why-in a "full" 64 bit environnement- it is not possible to manipulate and export very large image ?
I'm wonder If the background task is a part of the problem, and if it 's possible to disable it in CS6 or CC as in cs5 ( creates an “DisableAsyncExports.txt” file in Adobe InDesign executable directoty don't seems to disable it in CC or CS6).
Thank you for your help and good ideas..
DC.this is a .tif (not a "big"tiff) compressed in LZW or ZIP.
I just tried with another format (png), the error is the same... -
Passing multiple URL parameters with same name
Hi,
I have a question which is not entirely related to Java. But although its related HTTP calls, so I thought I might get some ideas here.
Background:
I am making HTTP URL call from SAP ABAP code. Its pretty much similar to Java (creating URL connection, setting HTTP headers, connecting, receiving response and everything)
For example,
http://service_server:8080/a7/extension.services.SearchRequirements.a7x?RequestStatus=CR&RequestStatus=RR
Now, this service_server runs a query to database where it uses both these values of "RequestStatus" to form 'OR' condition for a field.
Issue:
When I run this URL from browser, it shows XML response containing results for both values. In short, this is the ideal response.
(I am using getParameterValues(string) at service_server to read multiple values for same parameter)
But when I see response in SAP system, I see that it is returning data for only one value of 'RequestStatus'.
I checked the logs of service_server, and I see that it has received only one parameter, not two.
Question:
It seems like SAP systems web server is truncating both parameters with same name and passing just one of them to outside server(??)
Is there any configuration at Web Server side or any HTTP headers to be set so as to avoid this?
Can anybody suggest something on this?I managed to resolve this issue by using HTTP 'Post' method to send the data.
CALL METHOD CL_HTTP_CLIENT=>CREATE_BY_URL
EXPORTING
URL = L_URL
IMPORTING
CLIENT = L_HTTP_CLIENT
EXCEPTIONS
ARGUMENT_NOT_FOUND = 1
PLUGIN_NOT_ACTIVE = 2
INTERNAL_ERROR = 3
OTHERS = 4 .
"STEP-2 : AUTHENTICATE HTTP CLIENT
CALL METHOD L_HTTP_CLIENT->AUTHENTICATE
EXPORTING
USERNAME = 'name'
PASSWORD = 'password'.
"STEP-3 : SET HTTP HEADERS
CALL METHOD L_HTTP_CLIENT->REQUEST->SET_HEADER_FIELD
EXPORTING NAME = 'Accept'
VALUE = 'text/xml'.
CALL METHOD L_HTTP_CLIENT->REQUEST->SET_HEADER_FIELD
EXPORTING NAME = '~request_method'
VALUE = 'POST' .
CALL METHOD L_HTTP_CLIENT->REQUEST->SET_CONTENT_TYPE
EXPORTING CONTENT_TYPE = 'application/x-www-form-urlencoded' .
"SETTING REQUEST DATA FOR 'POST' METHOD
IF L_PARAMS_STRING IS NOT INITIAL.
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
EXPORTING
TEXT = L_PARAMS_STRING
IMPORTING
BUFFER = L_PARAMS_XSTRING
EXCEPTIONS
FAILED = 1
OTHERS = 2.
CALL METHOD L_HTTP_CLIENT->REQUEST->SET_DATA
EXPORTING DATA = L_PARAMS_XSTRING .
ENDIF.
"STEP-4 : SEND HTTP REQUEST
CALL METHOD L_HTTP_CLIENT->SEND
EXCEPTIONS
HTTP_COMMUNICATION_FAILURE = 1
HTTP_INVALID_STATE = 2.
"STEP-5 : GET HTTP RESPONSE
CALL METHOD L_HTTP_CLIENT->RECEIVE
EXCEPTIONS
HTTP_COMMUNICATION_FAILURE = 1
HTTP_INVALID_STATE = 2
HTTP_PROCESSING_FAILED = 3.
"STEP-6 : READ RESPONSE DATA
CALL METHOD L_HTTP_CLIENT->RESPONSE->GET_CDATA
RECEIVING DATA = L_RESULT .
"STEP-7 : CLOSE CONNECTION
CALL METHOD L_HTTP_CLIENT->CLOSE
EXCEPTIONS
HTTP_INVALID_STATE = 1
OTHERS = 2 .
{code} -
We have a requirement where in we have multiple solaris servers and each solaris server has a directory with the same name.
The files in these directories will be different.
These same name directories on multiple severs has to be mounted to a single directory on another sever.
We are planning to use NFS, but it seems we can not mount multiple directories with same name on different severs to a single mount point using NFS, and we need to create multiple mount points.
Is there any way we can achieve this so that all the directories can be mounted to a single mount point?You can try to mount all these mount points via NFS in one additional server and then export this new tree again via NFS to all your servers.
No sure if this works. If this works, then you will have in this case just an additional level in the tree. -
How to create device IDs with same name
i am using SE 3310 and its creating different device ids for each node sharing it . since I will be building a RAC enviornment I need these IDs/name to be same .
for example on one node the lun id is /dev/rdsk/c3t0d0s6 but the same lun id on node 2 is /dev/rdsk/c2t0d0s6.
In past with an old storage array I fixed this issue by creating links in /dev/rdsk for c3t0d0s6 ---> c2t0d0s6.
my question is : is there a way in SE3310 that device ids get created with same name or do i still have to rely on creating these soft links ?
thanks
Note: since i need the answer to this quickly i will wait a while and then post this question in other forums and i will update the question here with the answer .This could be a Solaris (I presumed) O.S. question rather than SE3310 or storage question.
The logical device (/dev/[r]dsk/*) is the work of the O.S. when it first configures the device, in this case the LUN from your SE3310. I can go in depth on how the cX number happens (due to device probe order, driver differences, history of device discovery due to need of persistent device naming, etc...) but ... it's a really long story and is really quite irrelevant and most people should not be interested...
If you have COMPLETELY identical servers, i.e. identical hardware down to specific HBA in specific slot are the same, and if you make sure that luns are presented to all servers exactly the same way, same order, and any changes are seen by all servers in the same sequence, in theory, all /dev/rdsk/* devices will be consistent across servers.
But that's still rather irrelevant. Application that is designed to work in a redundant environment should not be dependent on logical devices like /dev/rdsk being the same.
So ... in effect this is also not a question for the Solaris forum, but rather a question for those familiar with RAC, how to configure such that device access is done "safely" through actually identifying the lun rather than assuming /dev/rdsk are consistent. -
How to create two employees with same name as supplier record?
Dear all,
We need to create a supplier record for an employee so that we can issue invoice for pretty cash payment. If there are 2 employees with same name, how can we create supplier records for these 2 employees? The system does not allow duplicate supplier name.
Please advise.
Regards,
HYHello,
In R12 it is possible to create 2 employee with same name but different employee number.
And also possible to create these 2 employees as suppliers in Payables.
HTH,
Vik -
Error while uploading document with same name in Document library
Hi,
Whenever I try to upload document with same name in Document library it throws an error. I know its a default behavior but is there any way so that I can upload documents with same name or can we append some unique id with title of the document?
Please suggest.
ThanksNo, unfortunately this is not possible. SharePoint treats the file name as the primary key identifier for a document so if you try to upload a second document with the same name it will assume this is a new version of the file. If you have versioning enabled
on the document library, it will add this as a new version. If not, it will overwrite the original file with the new one.
If you need two documents with the same name, you will have to either place them in different folders within a document library or in different document libraries.
http://stackoverflow.com/questions/11894968/uploading-documents-with-same-name-to-sharepoint-2010
Regards,
Rajendra Singh
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful
http://sharepointundefind.wordpress.com/
Maybe you are looking for
-
Motion crashes when opening templetes
Motion crashes when opening templetes. Any idea why this happenes? I have Intel Mac Pro 2.66 Intel Mac Pro 2.66 Mac OS X (10.4.8)
-
How to restrict the values during extraction?
Hi everyone, I want to restrict the values while extracting data from R/3 Datasource... For example: I have MATNR, which have around 10 materials out of which i want to extract the data for only 5 materials. My Selection screen is disabled, i mean we
-
How can I permanently accept a certificate without trusting its certificate authority?
Hello, When I try to connect to a secure website for which the certificate is signed by an untrusted certificate authority, Firefox warns me, as expected. The problem is that I would like to add a permanent exception for this certificate, but the cor
-
Unexplained heavy data usage - Microsoft owns up
For the many who are seeing odd and unexplained data traffic - Microsoft are now admitting a problem caused by an unnamed third party app. See - http://www.bbc.co.uk/news/technology-12152517 I guess it won't be long before someone discovers which app
-
When trying to review a 'Member tree Hint' in the Ancestry.co.uk but FireFox Hangs when selecting a member tree to view and the clicking on the 'Review Member Tree Hints' button, The Java instruction 'javascript:_doPostBack('saveButton1'),"' appears