Create a 30 by 500 cell table ?

It has to be so blindingly obvious that I just don't see it and can't find it ...
How does one create a single spreadsheet of say 30 columns and 500 rows, to be used as a single spreadsheet on the screen, not viewed as a bunch of separate pages ?
That is probably two questions:
1 - How to set the number of rows and columns ?
2 - How to get plain SS view, without printerbreaks ?
Thanks,
-Sven

Hello
a - as far as I know there is no way to define a table in Numbers by its number of columns and rows.
We have to select the entire default one then click_insert rows so we may insert rows by chunks of 50
which quickly give 500. Do the same to control_insert columns by chunks of 10.
An alternate tip is to create the table in a blank Pages document. Here we may define directly the number of rows and columns.
When the table is created (it requires some time) select all, cut then paste the table in Numbers.
b - I don't understand what you want. Numbers defaults to a display without printerbreaks.
To see them we must ask it to use the Print View mode.
Yvan KOENIG (from FRANCE mercredi 20 février 2008 09:45:38)

Similar Messages

How to create a context menu in ALV table cell editor(Webdynpro abap )

Hello Experts,
I am having a problem in creating a context menu in a table cell editor in the ALV table output.I have assigned a 'lta' as the cell editor.But befor assigning the lta as cell editor I have assigned the menu to the lta.But when the view is rendered I can see the lta with the actioned assigned to it.But I cannot see the context menu.
The code snippet below:
"Create menu for each coloumn
create OBJECT lo_menu_actions type CL_SALV_WD_VE_MENU EXPORTING
      id = 'MITM_ACTIONS'.
lo_menu_actions->set_visible( value = abap_true ).
lo_menu_actions->set_visible_fieldname( value = 'ACTIONS' ).
"ADd menu items
CREATE OBJECT lo_menu_item_create type CL_SALV_WD_VE_MENU
exporting
    id = 'MITM_CREATE_EXPRESSION'.
lo_menu_item_create->set_visible( value = abap_true ).
lo_menu_item_create->set_visible_fieldname( value = 'Create' ).
"Add item 1
lo_menu_actions->ADD_ITEM( VALUE = lo_menu_item_create ).
" Set the cell editor for each column cell(link to an action)
LOOP AT lt_node_dec_tab_cols INTO ls_node_dec_tab_cols .
    lv_column_name = ls_node_dec_tab_cols-object_name.
    lr_column = lr_column_settings->get_column( lv_column_name ).
   "Create 'lta' Ui item
    CREATE OBJECT lo_lta TYPE cl_salv_wd_uie_link_to_action.
    lo_lta->set_menu( value = lo_menu_actions ).
    lo_lta->set_text_fieldname( lv_column_name ).
    lr_column->set_cell_editor( lo_lta ).
    IF ls_node_dec_tab_cols-is_result EQ abap_true.
      lr_column->set_cell_design( value =
                  cl_wd_table_column=>e_cell_design-key_medium ).
    ENDIF.
ENDLOOP.

Hi Prakash,
I have not come across this requirement till now to have context menu in a cell editor of alv.
Unfortunately the implementation of method SET_MENU of alv ui elements ( ex: cl_salv_wd_uie_text_view ) is not updating alv configurable table, instead it just stores in a global attribute as string. Hence has no effect on context menu.
If your user is very particular about this requirement of having context menu in cell editor, you can go for a normal table. Because, normal table's cell editor has the property to set the menuID as we do it for other ui elements.
Regards,
Rama

Certain Numbers templets allow you to drag and drop contacts to populate cell data, how can I create that functionality in my own tables?

Certain Numbers templets allow you to drag and drop contacts to populate cell data, how can I create that functionality in my own tables?

If you haven't come across the workarounds thread you may find helpful tips there on this and other ways to work with Numbers 3.
ronniefromcalifornia discovered how to bring contacts into Numbers 3. As described in this post:
"Open Contacts
Select all the cards you want
Copy
In Numbers, in a table, select cell A1
Paste
Boom. Works great. Even brought in the pictures. Cool."
So instead of drag and drop, just select in Contacts, copy, and paste into Numbers
SG

Question to create a calculation to add three table's cells for a grand total

I need help with creating a calculation to add three tables. Table, 6, 7 and 8. The total of all tables should be in the last table where it says Total.
I would appreciate any help.
Thanks

If this is the resultyou are looking for the attached will help.
Steve
Please post LiveCycle Designer ES questions in that forum in the future.

Creating a "Print View" of a Table on Another Sheet

Hi-
I would like to create a "print view" of a table on another sheet that already has reorganization filters applied to it. There is a template in Numbers called "Employee Schedule" that has exactly this, where the "printable" table's cells simply reference every cell in the source table on the other sheet.
I know there is a way to very quickly (i think with a dragging motion), create the references in each cell in one or two operations, as opposed to going to each individual cell and typing in the reference to the source table. I saw a post about how to do this a while back but cannot seem to locate it again
How do I do this? Thanks again for everyones help ;-)
Thanks
Matt

mattford1 wrote:
Hi-
Re-reading this, I don't think this answered my question. I understand how to reference a single cell, but how do you reference an entire table easily without having to go to each cell.
Thanks
Matt
Matt,
Select the first cell by clicking once on it, such that the border is highlighted. Then grab the little circle in the lower right corner of the border and drag it to the end of your table, either right or down. You can use this method to fill down or to the right. Sometimes it can be fussy, and if it refuses to behave, then you can use the alternate method, Copy and Paste. Click once on the first cell and Command-C. Shift-click the last cell and Command-V.
Jerry

How do I change the number formatting within a Cell Table in Microsoft Word?

Hi, I was wondering if someone could help me out on an issue I've been having... I work for an accounting firm and we do a lot of financial statements.
I was wondering if we would be able to treat a cell table in Microsoft Word 2007 like I would a cell table in Microsoft Excel. Meaning, I would like to change the formatting of the numbers in the table to the "Accounting" (number) format so it
aligns by the decimal point and use the $ signs and () for negative numbers. We do use the link tables feature, however, most of our balancing pages just can't be done in Excel because of the way the text is written. It would be much harder to format
the text if it were to be typed in Excel. We have also tried creating an Excel sheet within Microsoft Word but it is the same as linking the tables... Again, a text formatting issue. The only option is to use tables within Word but how do we change
the number formatting to a "accounting" (number) format where the numbers would align with the decimal point and use () for the negative numbers. Is there ANY option for us to do this other than manually entering this information in using tabs?
If there are no options other than entering it in manually, please consider this as an option for your next software update. I believe that a LOT of people out there will be interested in this feature... My manager and I just attended a webinar on Microsoft
Advanced Word Tips Tricks and Techniques and 75% of the attending people had this question but no answer.
Thank you very much for your help!!!!!

Word does not really have number formatting for table cells. You can align cell contents on the decimal point, though, by setting a so-called decimal tab stop.
Option 1:
- Select the cells for which you want to do this.
- Display the ruler.
- Click the Tab box on the left hand side of the ruler until the box contains an inverted T with a dot.
- Click in the ruler where you want the decimal tab.
Option 2:
- Select the cells for which you want to do this.
- Click the arrow in the lower right corner of the Paragraph group on the Home tab of the ribbon.
- Click the Tabs... button in the lower left corner of the dialog.
- Specify a tab position in the box, e.g. 1.5".
- Select the 'Decimal' radio button under 'Alignment'.
- Click Set.
- Click OK.
You will have to type the numbers as they should appear, including the $ for currency and the ( ) for negative numbers.
Regards, Hans Vogelaar

How to create a link between 2 cells in different spreadsheets?

when using numbers on MacBook Pro/IOS X - how to create a link between 2 cells in different spreadsheets?

In the cell where you want the duplicate data to appear from another sheet/table do the following:
type the equal sign ("=") then click the cell you in the sheet table while contents you want to appear in the cell where you just typed the equal sign"
it reads "The cell I click equals the result of the formula or the contents of the next cell I click"

Creating a chart on a filtered table

Hi all,
I have a table that I consider like my database.
Then I create new tables that references some columns from the database. But it is still big enough to extract some nice usefull datas, so I apply a filter on those new tables.
Now I can add a new column and perform calculations.
Nice, nice but not that nice in fact because when I create a chart on this filtered table the result is strange...
In fact, I can see that the chart has been constructed with all rows of the table and not the filtered rows.
I had a look around but did not find anything on that subject.
So my question is, is it possible to create a chart on filtered table ?
François

Tongbong wrote:
Done.
Is it possible then to copy a selection of cells using the formulas ?
I would like to have a query language such as in databases system. Would be so nice to write something something like :
select field from column::C where field="myValueOrParameter"
It would be fine too if the app was able to read the newspaper for me,
to drive me to the computer vendor…
An application is the result of choices made by its designers.
It's clear that your needs didn't fit in what they wanted to do.
You may _go to "Provide Numbers Feedback" in the "Numbers" menu_, describe what you dream of.
Then, cross your fingers, and wait at least for iWork'09
Yvan KOENIG (from FRANCE samedi 8 mars 2008 15:52:5)

How to create olap cube using Named Query Table in Data source View

I Create on OLAP Cube using Existing Tables Its Working Fine But When i Use Named Query Table with RelationShip To other Named query Table It Not Working .So give me some deep Clarification On Olap Cube for Better Understanding
Thanks

Hi Pawan,
What do you mean "It Not Working"？ As Kamath said, please post the detail error message, so that we can make further analysis.
In the Data Source View of a CUBE, we can define a named query. In a named query, you can specify an SQL expression to select rows and columns returned from one or more tables in one or more data sources. A named query is like any other table in a data source
view (DSV) with rows and relationships, except that the named query is based on an expression.
Reference:Define Named Queries in a Data Source View (Analysis Services)
Regards,
Charlie Liao
TechNet Community Support

Is it possible to create many primary key for a table?

hello sir/mam.
i am selva, i am new to abap,
is it possible to create many primary key for a table?
please guide me.

Hi Selva,
Many Primary Keys = Composite Key.
i.e some set of columns will enable you to identify a unique row from a set of rows in the table.
This can be achieved by checking the primary key check box in se11.
Hope it helps.
Regards,
Maheswaran.B
Message was edited by: Maheswaran B

How to use create, delete, modify butttons in a table

hi all
in my application i have emp table in my source view
in that table i have inserted static data in columns i.e., empid, empname. i have 3 buttons create, delete, modify buttons in that table. when i press Create button it navigates to another view1 in which we have a emp form with create new emp button and labels empid, empname and 2 input fields.After filling the form when hit the create newemp button the form data should be displayed in the table.
The same for Modify and delete. i.e., when i select a particular empid row in my source view table and hit the modify button it should navigate to view2 in which the particular record form with data displays and after making necessary modifications the modified data should be display in the particular row .
For delete button, when i select a particular record in the table and hit delete button it should be deleted from the table.
any snippet of code is valuable
Thanks in advance
sravan

Hi Sravan,
I just need a clarification, are you getting the table data from the back-end system?
On the second view, after the user input on click of the "Create New" or "Modify" button, update the back-end. Once the update is successful, fire a plug back to the first view and reload the table or execute the model again. The updated records will be fetched from back-end system.
On click of "Delete" button, remove the record from the back-end and execute the model again.
This holds good if you have the data fetched from the back-end.
Regards,
Santhosh.C

Why do we create multiple aliases to a single table?

<h4>{color:#0000ff}Hi,{color}</h4>
<h4></h4>
<h4></h4>
<h4>{color:#0000ff} Why do we create multiple aliases to a single table in the same query?{color}</h4>
<h4></h4>
<h4></h4>
<h4>{color:#0000ff}{color:#000000}For Ex: {color}{color}</h4>
<h4>
{color:#000000}select name,address,phone, from emp e, emp e1{color}</h4>
<h4></h4>
<h4>{color:#000000}where e.empid = e1.empid;{color}</h4>
<h4>
{color:#0000ff}ofcourse the above query's where condition is not correct, but i am giving as an example only{color}</h4>
<h4>{color:#0000ff}I have seen similar kind of queries where a single table name is aliased 10 times in the same query{color}</h4>
<h4>{color:#0000ff}can someone help me to understand the logic behind it?{color}</h4>
<h4>{color:#0000ff}Thanks in advance{color}</h4>
<h4>{color:#0000ff}greddy.{color}</h4>
Edited by: greddy on Oct 24, 2008 2:46 AM

Hi,
When you say
FROM    emp e
,       emp e1you are using two copies of the same table.
Can you imagine using two copies of the same book at the same time?
Say you see a word (like "hyrax") that you don't know. You might look up that word in the dictionary.
The English sentence "Open the dictionary to the page containing the new word." is like this SQL query:
FROM    dictionary
WHERE   :unknown_word BETWEEN low_guide_word and high_guide_wordWhat if you saw that word while reading a book (let's call it book_a).
You might want to leave book_a open, and place the dictionary beside book_a, so you can easily compare how the word is used in book_a with the definition in the dictionary.
This corresponds to joining two tables in SQL:
FROM    book_a
JOIN    dictionary ON unknown_word BETWEEN low_guide_word AND high_guide_word
WHERE   book_a.page = whatever -- NOTE: both tables have a column called pageor you can use aliases for one or both of the tables
FROM    book_a      a
JOIN    dictionary d ON a.unknown_word BETWEEN d.low_guide_word AND d.high_guide_word
WHERE   a.page = whatever -- NOTE: both tables have a column called pageNow, imagine that book_a is itself the dictionary. Say you saw the word "hyrax" while you were looking up another word, "ibex".
You can do a side-by-side comparison, as above, if you have two copies of the dictionary. Leave one copy open to "ibex", and open the other copy to "hyrax".
This corresponds to a self-join in SQL:
FROM    dictionary a
JOIN    dictionary d ON a.unknown_word BETWEEN d.low_guide_word AND d.high_guide_word
WHERE   a.page = whatever -- NOTE: both tables have a column called pageNotice that this last bit of code is identical to the previous one, except that book_a is replaced with dictionary.
In this case, you must you a table alias, at least for one copy. It wouldn't make any sense to say "Leave the dictionary open to "ibex" and open the dictionary to "hyrax". You have to have some unique way of referring to each copy, such as "Leave the dictionary on my left open to "ibex" and open the dictionary on my right to "hyrax"."

How to create multiple rows in a child table from the multi select Lov

Hi
We have Departments and EmployDept and Persons tables and each employee can associate multiple departments and vice versa.While creating a Department page there should be a Multi Select LOV(values from Persons table) with search option for the Persons.From the search panel we can select multiple persons for that department.Suppose we have selected 5 persons and click on submit, then it should create 5 rows in the EmployDept table for 5 persons with that department id.
Any inputs on how to implement this scenario please..

Maybe you can get some ideas from here -
http://adfdeveloper.blogspot.com/2011/07/simple-implementation-of-af.html

How to create a maintainance view for a table.

Hi All,
Can anyone explain me how do we create a maintainance view for a table?
Also, what access is required to create the view.
Is it true that for SAP tables we cannot create a maintainance view?
Appreciate any help on this.

Hi
Can anyone explain me how do we create a maintainance view for a table?
<i>
You can use the SE11 menu option 'Utilities-->Table Maintenance Generator' or you can use transaction SE54.</i>
also check
<i>http://help.sap.com/saphelp_nw04/helpdata/en/38/81c1351181b73fe10000009b38f839/frameset.htm</i>
http://help.sap.com/saphelp_nw04/helpdata/en/38/81c1351181b73fe10000009b38f839/frameset.htm
Regards
krishna
<i>Note: Award Points if helpful. Thanks</i>

How to create transaction code for a Z-table

How to create transaction code for a Z-table?
Se93 --> then which radio button to be selected? and what is the program nam e to be given

Hi Sam,
<b>Procedure to create a TCODE for ZTABLE:</b>
Create a table maintainance/View for the Z* Table.
Once you create the view goto SE93>Select Parameter transaction and give the short desc.>
Give the transaction as SM30(Skip the first screen-optional)>Check all check boxes under GUI support>In the default values(grid)section first row give the VIEWNAME as you created initially and the second row UPDATE as X.
<u><i>Se93 --> then which radio button to be selected</i></u>
Select the parameter transaction as a radio button.
<u><i>what is the program nam e to be given</i></u>
no need to give any program name. Instead you have to give the transaction code name as SM30.
Pls mark the helpful answers.
Thanks
Eswar

Create a 30 by 500 cell table ?

Similar Messages

Maybe you are looking for