Create a install-server on linux

Hi,
I want to install solaris 9 on my ultra1 via
tftp. There is a script setup_install_server delivered
with solaris 9 but the readme talks about a solaris
system to act as install server. I dont have any other
solaris system, so is it possible to use linux
as an install server for solaris 9 net-install (and
how )?
Thanks in advance !
Stefan

HI,
The script which Ur talking about is used for unattended remote installation provided both the machines are in the same subnet JUMP start installation thats what it is called in solaris.
Setup_install_server script copies the content of the installtion CD to a machine which would act as a install server for a client which is being initiated for unattended installation,like wise UR suppose to setup an configuration server with configuration information,system identification sysidcfg file
I have never come across jump start installation being done between solaris and linux it's usually between two solaris machine with SPARC paltform.
My advice is to go for normal installation webstart .

Similar Messages

Aborted al_engine error while creating BODI Job Server in Linux

Hi,
I have installed BODI in linux (in the directory /opt/app/DataIntegrator).
While configuring job server I got the following error.
Updating the repository <bodi@tdw__Oracle>. Please wait...
sh: line 1: 15850 Aborted al_engine -Ubodi -Pbodi -Stdw -NORACLE
-ZMACHINEINFOI/opt/app/DataIntegrator/bin/machine.sql 2>/tmp/al_machine.out.156
78
UNABLE to Update the repository <bodi@tdw__Oracle>. Please check the /tmp/al_mac
hine.out.15678 for more details!
SNMP is disabled.
The log file tmp/al_machine.out.15678 is of OKB and no info inside it.
I could able to solve this issue by giving chmod 777 -Rf /opt permissions. Is BODI needs 777 permissions for Job server to be created?
Oracle is installed in /opt/app/oracle.
Can you help on this issue?
Thanks & Regards
Maran MK

Please test the Oracle repository connectivity from the al_engine directory so that you can rule out any connectivity issues before checking for the chmod settings.
Let me know what you find.
Thanks & Regards
Tiji

Solaris 10 box - install server PROBLEMS

Hi,
i have an E450 setup with solaris 10, i follwed the docs to create an install server for solaris 9.
problem is : when booting client it gets the RARP reply and then sits and does nothing ??
The 2 machines are on their own separate network.
Server ip = 192.168.1.101 SN 255.255.255.0
client ip = 192.168.1.102 SN 255.255.255.0
i ran the #./add_install_client -e 8:0:20:xx:xx:xx ( client is in /etc/hosts) which reports no errors
/etc/bootparams shows = server1 root=Xerxes:/export0/sol_9/Solaris_9/Tools/Boot install=Xerxes:/export0/sol_9 boottype=:in rootopt=:rsize=32768
/etc/dfs/dfstab shows = share -F nfs -o ro,anon=0 /export0/sol_9
is this correct ?? and why is the client not even getting to the spinning dial ?? let alone the installation, do i have to have a sysidcfg file ????

Excellent. So we can see that the RARP has completed (sucessfully it appears), but the TFTP step has not. Perhaps the TFTP server isn't running properly.
Now I see what's going on. You're running Solaris 10 on the machine, but you're trying to jumpstart Solaris 9. That's fine, but those older scripts don't understand how to start Solaris 10 services.
It's very likely that the 'add_install_client' script populated /etc/inetd.conf and HUP'ed inetd to start the TFTP server. That's not sufficient.
You probably have some lines in /var/adm/messages saying that you have to run 'inetconv'. Run that and you should get a tftp service. (Check by running 'svcs -a | grep tftp'). With that in place, the boot should proceed.
(In answer to your other question, yes this is a combination boot and jumpstart server. Thats what you get when you run 'setup_install_server' and you don't use the '-b' flag to make it only a boot server).
Darren

Solaris 10 - install server - AAAAAARGH !

Hi,
i have set up a Solaris 10 box, and created an install server for solaris 9, when booting the client i get a RARP reply
but then it sits and festers doing nothing ?
V CONFUSED !!!!!!!!!!!!
Edited by: syscare on Jan 22, 2008 4:37 AM

syscare wrote:
Hi,
i have set up a Solaris 10 box, and created an install server for solaris 9, when booting the client i get a RARP reply
but then it sits and festers doing nothing ? Easiest way to troubleshoot is to snoop the client from the server, then see what the last traffic you see is before it hangs.
The normal sequence is:
RARP
TFTP
rpc.bootparams
NFS
Darren

SunONE Web Server 6.1 on linux: can't create a new server

Hi all
When we try to create a new server from the Admin server ("Add Server" button), and after fill the form and click OK, we get the following error in the "errors" log file of the admin server:
[23/Oct/2003:11:25:35] failure (14588): for host 10.95.4.28 trying to POST /https-admserv/bin/install, cgi_scan_headers reports: HTTP4044: the CGI program /opt/SUNWwbsvr/bin/https/admin/bin/install did not produce a valid header (program terminated without a valid CGI header. Check for core dump or other abnormal termination)
As I told in the subject, web server is installed on a linux (red hat) box
Is it a bug in the WebServer 6.1? for linux or for solaris too?
Regards

Hmmmm, well stick with the 7.2 version and let's see if we can figure this out.
What version of perl is on the box?
--jb

Linux install server and solaris 10

Hi,
I am trying to learn Solaris as a student. I bought a SPARC (Netra T105 UltrasparcII) server on ebay which requires a network install as there is no cd-rom, or keyboard.
I only have a linux box (like I said, I'm a stingy student) to use as an install server, there is a few tutorials out there to try and do this, but none for Solaris 10. I have been hacking away at this for days, but cannot get it to install. I have the sparc server using RARP and then getting the /etc/bootparams file and downloading the boot files, but it does not get to locating the jumpstart files or the install files (I dont know if I can install from the terminal using the keyboard (without jumpstart) - I have not got that far yet).
I always get this, like it cannot find the install directory, I was wireshark on the linux boot server and see loads of NFS traffic after the TFTP download, but cannot seem to see what part it actually at. I have a detailed log at the bottom from putty. Any help greatly appreciated.Cheers
ERROR: bpgetfile unable to access network
/sbin/install-discovery: information: not found
Linux box setup:
/etc/bootparams
solaris root=192.168.2.10:/home/sunos/Solaris_10/Tools/Boot rootopts=rsize=32768 boottype=:in install=192.168.2.10:/home/sunos_install/Solaris_10/Product sysid_config=192.168.2.10:/home/sunos_install/jumpstart/sysidcfg install_config=192.168.2.10:/home/sunos_install/jumpstart/jumpstart.conf
TFTP setup from /tftpboot:
[root@robert tftpboot]# ll
total 232
lrwxrwxrwx 1 root root 8 Jun 10 13:55 C0A80214 -> inetboot
-rwxrwxrwx 1 root root 221280 Jun 10 13:47 inetboot
The Openboot can get ahold of the inetboot file and downloads and it and then loads it.
The following directories are exported through NFS
[root@robert sunos_install]# cat /etc/exports
#/home/nfs 192.168.2.0/24(ro,sync)
/home/sunos *(ro,no_root_squash)
/home/sunos_install *(ro,no_root_squash)
[root@robert tftpboot]# showmount -e localhost
Export list for localhost:
/home/sunos *
/home/sunos_install *
In /home/sunos, I have:
[root@robert sunos]# tree -L 2
|-- Solaris_10
| `-- Tools
|-- boot
| |-- hsfs.bootblock
| `-- sparc.miniroot
`-- lost+found
In /home/sunos_install, I have:
[root@robert sunos_install]# tree -L 2
|-- Solaris_10
| `-- Product
|-- jumpstart
| |-- jumpstart.conf
| `-- sysidcfg
`-- lost+found
[root@robert jumpstart]# cat jumpstart.conf
install_type initial_install
system_type server
partitioning explicit
filesys any 2000 /
filesys any 1500 swap
filesys any 1500 /var
filesys any 2000 /opt
geo N_America
cluster SUNWCreq
package SUNWgzip add
package SUNWless add
package SUNWman add
package SUNWbash add
package SUNWtcsh add
package SUNWzsh add
[root@robert jumpstart]# cat sysidcfg
system_locale=en_US
timezone=US/Pacific
terminal=xterms
name_service=NONE
timeserver=pool.ntp.org
security_policy=NONE
root_password=xxxx
network_interface=primary
{ hostname=js-test
ip_address=192.168.2.20
netmask=255.255.255.0
protocol_ipv6=yes}
Putty log file from console:
root server: 192.168.2.10 (192.168.2.10)
root directory: /home/sunos/Solaris_10/Tools/Boot
module /platform/sun4u/kernel/sparcv9/unix: text at [0x1000000, 0x10a096d] data at 0x1800000
module /platform/sun4u/kernel/sparcv9/genunix: text at [0x10a0970, 0x12615bf] data at 0x1867cc0
module /platform/sun4u/kernel/misc/sparcv9/platmod: text at [0x12615c0, 0x12615c7] data at 0x18bdf80
module /platform/sun4u/kernel/cpu/sparcv9/SUNW,UltraSPARC-IIi: text at [0x1261600, 0x126da07] data at 0x18be680
SunOS Release 5.10 Version Generic_139555-08 64-bit
Copyright 1983-2009 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
\|/Ethernet address = 8:0:20:c2:1b:b4
-Using default device instance data
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/mem = 1048576K (0x40000000)
avail mem = 846602240
root nexus = Netra t1 (UltraSPARC-IIi 440MHz)
pseudo0 at root
pseudo0 is /pseudo
scsi_vhci0 at root
scsi_vhci0 is /scsi_vhci
ramdisk0 at root
ramdisk0 is /ramdisk-root
root on /ramdisk-root:a fstype ufs
pseudo-device: dld0
dld0 is /pseudo/dld@0
pcipsy0 at root: UPA 0x1f 0x0
pcipsy0 is /pci@1f,0
PCI-device: pci@1,1, simba0
simba0 is /pci@1f,0/pci@1,1
SUNW,hme0 : PCI IO 2.0 (Rev Id = c1) Found
SUNW,hme0 : Local Ethernet address = 8:0:20:c2:1b:b4
PCI-device: network@1,1, hme0
hme0 is /pci@1f,0/pci@1,1/network@1,1
SUNW,hme1 : PCI IO 2.0 (Rev Id = c1) Found
SUNW,hme1 : Local Ethernet address = 8:0:20:c2:1b:b5
PCI-device: network@3,1, hme1
hme1 is /pci@1f,0/pci@1,1/network@3,1
PCI-device: ebus@1, ebus0
ebus0 is /pci@1f,0/pci@1,1/ebus@1
su0 at ebus0: offset 14,3803f8
su0 is /pci@1f,0/pci@1,1/ebus@1/su@14,3803f8
cpu0: UltraSPARC-IIi (portid 0 impl 0x12 ver 0x91 clock 440 MHz)
iscsi0 at root
iscsi0 is /iscsi
|pseudo-device: zfs0
zfs0 is /pseudo/zfs@0
Configuring devices.
/pseudo-device: devinfo0
devinfo0 is /pseudo/devinfo@0
PCI-device: pci@1, simba1
simba1 is /pci@1f,0/pci@1
pseudo-device: pseudo1
pseudo1 is /pseudo/zconsnex@1
/pci@1f,0/pci@1,1/network@1,1 (hme0) online
/pci@1f,0/pci@1,1/scsi@2 (glm0):
Rev. 3 Symbios 53c875 found.
PCI-device: scsi@2, glm0
glm0 is /pci@1f,0/pci@1,1/scsi@2
PCI-device: pci@1, pci_pci0
pci_pci0 is /pci@1f,0/pci@1/pci@1
su1 at ebus0: offset 14,3602f8
su1 is /pci@1f,0/pci@1,1/ebus@1/su@14,3602f8
ecpp0 at ebus0: offset 14,340278
ecpp0 is /pci@1f,0/pci@1,1/ebus@1/ecpp@14,340278
pseudo-device: fssnap0
fssnap0 is /pseudo/fssnap@0
pseudo-device: ramdisk1024
ramdisk1024 is /pseudo/ramdisk@1024
sd0 at glm0: target 1 lun 0
sd0 is /pci@1f,0/pci@1,1/scsi@2/sd@1,0
pseudo-device: winlock0
winlock0 is /pseudo/winlock@0
pseudo-device: llc10
llc10 is /pseudo/llc1@0
pseudo-device: lofi0
lofi0 is /pseudo/lofi@0
pseudo-device: fcp0
fcp0 is /pseudo/fcp@0
pseudo-device: fcsm0
fcsm0 is /pseudo/fcsm@0
pseudo-device: trapstat0
trapstat0 is /pseudo/trapstat@0
pseudo-device: pool0
pool0 is /pseudo/pool@0
pseudo-device: mem_cache0
mem_cache0 is /pseudo/mem_cache@0
pseudo-device: fcode0
fcode0 is /pseudo/fcode@0
-\i2c0 at ebus0: offset 14,600000
i2c1 at ebus0: offset 14,100000
i2cadc0 at i2c0: reg=0x0:0x9E, name=bus,address="0,9e"
i2cadc0 is /pci@1f,0/pci@1,1/ebus@1/i2c@14,600000/adc@0,9e
i2cgpio0 at i2c0: reg=0x0:0x70, name=bus,address="0,70"
i2cgpio0 is /pci@1f,0/pci@1,1/ebus@1/i2c@14,600000/gpio@0,70
i2cgpio1 at i2c0: reg=0x0:0x72, name=bus,address="0,72"
i2cgpio1 is /pci@1f,0/pci@1,1/ebus@1/i2c@14,600000/gpio@0,72
|/-\|/-\|/-Using RPC Bootparams for network configuration information.
Attempting to configure interface hme1...
\|/-\|/-WARNING: hme1: fault detected in device; service degraded
WARNING: hme1: No response from Ethernet network : Link down -- cable problem?
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-Skipped interface hme1
Attempting to configure interface hme0...
Configured interface hme0
ERROR: bpgetfile unable to access network
/sbin/install-discovery: information: not found

rmcnaught48 wrote:
Hi,
I am trying to learn Solaris as a student. I bought a SPARC (Netra T105 UltrasparcII) server on ebay which requires a network install as there is no cd-rom, or keyboard.
I only have a linux box (like I said, I'm a stingy student) to use as an install server, there is a few tutorials out there to try and do this, but none for Solaris 10. I have been hacking away at this for days, but cannot get it to install. I have the sparc server using RARP and then getting the /etc/bootparams file and downloading the boot files, but it does not get to locating the jumpstart files or the install files (I dont know if I can install from the terminal using the keyboard (without jumpstart) - I have not got that far yet).You can install using the keyboard with jumpstart. Without jumpstart you'd need local media (you can't enter the OS via the keyboard).
I always get this, like it cannot find the install directory, I was wireshark on the linux boot server and see loads of NFS traffic after the TFTP download, but cannot seem to see what part it actually at. I have a detailed log at the bottom from putty. Any help greatly appreciated.Cheers
ERROR: bpgetfile unable to access network
/sbin/install-discovery: information: not foundHmm. That looks like the image file is corrupt. Can you pull the image from media again? Can you see if there's a /sbin/install-discovery file in the image (usually under Tools/Boot/root). I recall there used to be a problem with that file.
Linux box setup:
/etc/bootparams
solaris root=192.168.2.10:/home/sunos/Solaris_10/Tools/Boot rootopts=rsize=32768 boottype=:in install=192.168.2.10:/home/sunos_install/Solaris_10/Product sysid_config=192.168.2.10:/home/sunos_install/jumpstart/sysidcfg install_config=192.168.2.10:/home/sunos_install/jumpstart/jumpstart.confIf you just want an interactive install (prompt for configuration/settings), you don't need sysid_config or install_config. Those are for automated installations.
TFTP setup from /tftpboot:
[root@robert tftpboot]# ll
total 232
lrwxrwxrwx 1 root root 8 Jun 10 13:55 C0A80214 -> inetboot
-rwxrwxrwx 1 root root 221280 Jun 10 13:47 inetboot
The Openboot can get ahold of the inetboot file and downloads and it and then loads it.
The following directories are exported through NFS
[root@robert sunos_install]# cat /etc/exports
#/home/nfs 192.168.2.0/24(ro,sync)
/home/sunos *(ro,no_root_squash)
/home/sunos_install *(ro,no_root_squash)
[root@robert tftpboot]# showmount -e localhost
Export list for localhost:
/home/sunos *
/home/sunos_install *That looks pretty good.
You do have the option of running VMware on linux, and putting a Solaris 10 image on it, then using that VM as your boot server. But the problem you're displaying doesn't appear to be related to the linux server.
Darren

How to install PEAR on Linux server

Hi
I have PHP installed on one linux server and developers are using it already. I have been given the task to get the oci8 (oracle connectivity) done on this same server. I can not do the reinstall of whole PHP again. During the install of OCI extention I got many errors for missing PEAR files.
So I went through the PEAR document and found "php go-pear.php" command to install the PEAR package. This command fails with below error.
download of http://pear.php.net/get/PEAR?uncompress=yes failed: Failed to parse address "" (0)
The problem is this Linux box does not have direct internet connectivity so I had to download all the required packages as per go-pear.php on my local machine and I am FTPing them to this linux box. I have kept the "PEAR-1.8.1.tar" file in the same directory where go-pear.php file exists but still the above command tries to download it from internet.
Could you please tell me how can I overcome this problem. Please let me know if there are any RPM's that I can use to install PEAR rather that "php go-pear.php" command.
Thanks
Shelly

Hi CJ.
It has been more than 4 weeks that I am strugling to get PHP-Oracle work on my system. You are the only hope right now. I have gone through so many articles and white pages that I am totally confused and starting to hate PHP or actually Suse Linux. :-)
Below are the details of my system.
more SuSE-release
SUSE LINUX Enterprise Server 9 (i586)
VERSION = 9
PATCHLEVEL = 4
rpm -qa php* No results
rpm -qa ph* --No results
rpm -qa oracle*
oracle-instantclient-devel-10.2.0.4-1
oracle-instantclient-basic-10.2.0.4-1
* which php*
*/usr/bin/php*
* php -version*
PHP 4.3.4 (cli) (built: Jan 17 2008 09:55:23)
Copyright (c) 1997-2003 The PHP Group
Zend Engine v1.3.0, Copyright (c) 1998-2003 Zend Technologies
This is what I see on my system
*/usr/bin> ls -l |grep php*
-rwxr-xr-x 1 root root 100308 2008-01-17 05:03 asp2php
-rwxr-xr-x 1 root root 1392441 2008-01-17 04:55 php
-rwxr-xr-x 1 root root 684 2008-01-17 04:55 php-config
-rwxr-xr-x 1 root root 593 2008-01-17 04:55 phpextdist
-rwxr-xr-x 1 root root 2082 2008-01-17 04:55 phpize
/usr/bin> whereis php
php: /usr/bin/php /etc/php.ini /usr/lib/php /usr/include/php /usr/share/php /usr/share/man/man1/php.1.gzI see that PHP is already installed on my system which is version PHP 4.3.4.
Question.
1) Do i have to upgrade the PHP version to the latest to get OCI8 configured?
2) If the answer to the above question is Yes than could you point me to any reference doc?
3) If the upgrade is not needed, how can I configure PHP to use OCI8 to connect to database?
Thanks in advance
Shelly

How to install Apache Server on Linux 10G for HTML DB 1.6

Hello,
i have Oracle 10g installed under Suse Linux. Apache needed to be installed too in the oracle home but isn't.
it's required for HTML 1.6 DB install.
i did not found it with the normal installation image, how to install Apache for Oracle? for 10G?
Regards
Carl

The Apache is on the Companion CD
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/linuxsoft.html
Also HTMLDB 1.5, so Install only the Application Server and add the HTMLDB 1.6 from separate Download

Installing Reports Server on Linux

I've downloaded the tarball for Reports 6i for Linux, but I can find absolutely nothing documentation-wise on how to install the bugger. Little help?

Awesome, thats what I thought, so in that case, if I want to install Essbase server on Linux, I have to download the essbase files for linux and select only the essbase server while installing, and if I want to install essbase components on windows, I have to download the same set of files but for Windows OS and select to install only the essbase components that I need. Is that right?
Thanks,
Ted.

Installing Essbase Server on Linux, Other essbase components on windows.

Hello all,
We are planning to upgrade from 11.1.1.4 to 11.1.2.2. We have just the essbase server installed on linux and other essbase components like Essbase Administration Services, essbase integration services, provider services installed on Windows. My question is how do I go about gathering files to install just the Essbase Server on Linux and other Components on Windows. I have gone through the Media Pack doc for Windows 2008 64(on which we plan to install the other essbase components). In that if I click on the files needed for essbase(listed as essbase plus) it gives me all the files needed to install essbase components.Which means(correct me if am wrong) on a server where am planning to install just essbase components like Provider services, Essbase Admin Services and provider services it gives me the files needed for Essbase server as well, which I donot need. So how do I go about accomplishing this. Or are there any other ways to achieve what am trying to do.
Thanks,
Ted.

Awesome, thats what I thought, so in that case, if I want to install Essbase server on Linux, I have to download the essbase files for linux and select only the essbase server while installing, and if I want to install essbase components on windows, I have to download the same set of files but for Windows OS and select to install only the essbase components that I need. Is that right?
Thanks,
Ted.

Installing Sun Java System Directory Server on Linux Ent.

Hi,
I tried to install Sun Java System Directory Server on Linux on Redhat Enterprise Linux AS, but I faced some problems.
I just want to know if there is any pre-requisites for installing this product on Linux.
Thanks
Sadiq

Hello
Which problem did you have encountered installing the DS on Linux AS.
Currently I want to install SunOne DS V5.2 on Redhat Linux AS 2.1 and encounter several configuration issues
Thanks in advance,
Andrew

Installing Oracle App Server on Linux

Hi,
Has anyone installed the App Server on Linux? Can they tell me if it was difficult, complicated, etc. bearing in mind that I am not a DBA, and have basically no experiance with this sort of stuff at all. So basically what I am asking is can you stick in the CDs and follow the install guide and get it done in half a day or less.
Cheers.

I would say that a half a day is grossly underestimating it, by my experience and what you indicate your level of expertise is. I ended up installing, getting to a fail point, uninstalling and re-doing. Some errors are "recoverable", but some do not seem to be (from my experience). I'd make a few recommendations. I have it installed on Mandrake 8.x (latest release, I think), which seems to be "doable" but I'd recommend going with a certified platform if you don't know what you are doing. Also, Mandrake had some quirks like their security management software which resets file permissions "behind the scenes". This was my first experience with Mandrake so it took me a while to figure out which files to edit/fix so that Enterprise manager would get the right data.
Read the readme!
Read the installation docs all the way through!
Read the release notes all the way through!
I had a NUMBER of problems, some specific to my platform (which is not certified by Oracle, so it's not their fault) and some which were covered in the readme. It took me a while to get everything right and I ended up struggling most with the Infrastructure install. Most likely that was due to my hardware & OS (Mandrake), but there are some issues in the release notes that are important. The reason I would restart many times is that I wanted the installation to go smoothly from start to finish so that I could better understand the requirements, etc. Examples of issues (which includes things from the readme/release notes and otn):
- either install PDKSH or link /bin/bash to /bin/ksh. /bin/ksh is listed in one of the scripts as the shell during installation configuration. This should be in the installation guide as a pre-requisite.
- install the sysstat package so the enterprise manager will show graphs, etc. This should be in the installation guide as a pre-requisite.
- link (symbolic) your perl binary to /usr/local/bin/perl
- I received numerous link errors due to two problems:
- genclntsh didn't have a good link command for my platform. There seems to be two work-arounds posted around here, but I chose to add -lgcc and -L/path/to/gcclib on the ld line. E-mail me if you want more details ([email protected]). My path was something like: /usr/lib/gcc-lib/i586-mandrake-linux-gnu/2.96 where I found the libgcc.a
- Reports server and Forms server failed because the link line was linking to libXm.2.1.so instead of libXm.2.0.1.so (or libXm.2.so, etc). The development team evidently used a later version of Motif than I had, so I fixed it in the forms and reports makefiles, respectively.
I can't remember, offhand, what else I had to do, but this covers it. Obviously, a lot of this depends upon the type of install you choose. I wanted the reports server, which requires the infrastructure, etc.
Good luck.
Jeff

How install oracle on linux 64 bit on itanum server

dear All ,
Please guide me how to install the oracle (which version of 9i) on itanium server with linux 64bit.
i tried for 9.2.04. 64-bit , and 9.2.0.2 for itanium but failed
nilesh

yes, both plataform library, compile in linux x64

CRYSTAL REPORT SERVER 2008 LINUX VERSION INSTALATION PROBLEM

GOOD AFTERNOON TO ALL ,
I am trying to install crystal reports server 2008 on RHEL4 .. after entering the product key...
it is trying to connect to existing database with follwing detalis given by me
..TNS NAME
userid and passwd or oracle user
error :
"failure to validate the database credential has a potentilal to crash the database at a later stage .enter correct information"
i set the all env for oracle oracle_home ,oracle SID ,LD path library..
i grant the source to oracle user also...
after that i tried same CRYSTAL REPORTS SERVER 2008 LINUX VERSION TRY TO INSTALL IN OTHER RHEL machine .it is not at all accepting the product key it self..
pls reply ..
Rehards
MAHENDRA

Post to the [Business Objects Enterprise Administration|BI Platform;
forum. This forum is for CR in .NET. (see the heading at the top of this forum).
Marking as assumed answered.
Ludek

Crystal reports server 2008 linux version instalation problem

GOOD AFTERNOON TO ALL ,
I am trying to install crystal reports server 2008 on RHEL4 .. after entering the product key...
it is trying to connect to existing database with follwing detalis given by me
..TNS NAME
userid and passwd or oracle user
error :
"failure to validate the database credential has a potentilal to crash the database at a later stage .enter correct information"
i set the all env for oracle oracle_home ,oracle SID ,LD path library..
i grant the source to oracle user also...
after that i tried same CRYSTAL REPORTS SERVER 2008 LINUX VERSION TRY TO INSTALL IN OTHER RHEL machine .it is not at all accepting the product key it self..
pls reply ..
Rehards
MAHENDRA

Post to the [Business Objects Enterprise Administration|BI Platform;
forum. This forum is for CR in .NET. (see the heading at the top of this forum).
Marking as assumed answered.
Ludek

Create a install-server on linux

Similar Messages

Maybe you are looking for