Create a Job for a transaction dynamically through ABAP program.

Hello Experts,
Can a job be created for a transaction dynamically, say for example i have a parameter on selection screen which will take the name of the transaction and then i have to create a job to run that transcation.
Plz provide sample code.
Regards,
Mansi.

hiii
yes you can call transaction like that..take tcode in that parameter then you can use it in your program with statement like
call transaction (variable)..in background process.
regards
twinkal

Similar Messages

How to create a background job for call transaction

hi gurus
can any one suggest me
how to create the background job for call transaction.
thank you
regards
kals.

Hi,
Refer
https://forums.sdn.sap.com/click.jspa?searchID=10926107&messageID=889652
Regards
Kiran Sure

Define back ground job for Maintenance Order Settlement through KO8G

Hi Experts,
I need to define back ground job for Maintenance Order Settlement through KO8G transaction code.
Here are the requirements
1. The job should run on weekly basis automatically.
2. The settlement period and posting period should be taken care by the job dynamically. i.e. if the job runs in July, the job should pick up Settlement period and posting period as 7 automatically.
Kindly let me know the steps to define the back ground job as per above requirement.
Sanjeev

To run the KO8G each week, the a RECURRING job has to be created. At my job, Basis/Ops department would create and schedule the job.
To have the posting periods, dates etc dynamically determined at the time the job runs:
Create the variant and save.
In 5.0, KO8G does not save a variant, therefore, go to SE38 and create a variant for program: RKO7KO8G
When you go to the ATTRIBUTES screen, to add a name and description, you will see a list of all the fields that are part of the selection criteria.
For an example, I frequently use the Posting Date. To the right of the screen is a field called Selection Variable, click on the drop box and select D - Dynamic Date Calculation.
Go to field NAme of variable, click on drop box and select the variable you want.
Each field has its own list of selection variable and name of variable depending on how it works in the progra.
If you look at Posting period you will see:
T: Table Variable from TVARVC
B: User-defined variables
I do not know about User defined variables, but for TVARC there is thread that leads to a "how to" blog
[How create a variable in the TVARVC that calculate the last week]
do some more searching and you should find more answers
Good luck
Althea

Creating a Job for publication in Sql Server with select statement for passing a parameter

I am creating a job for adding article to a publication. the second step (e.g. for adding article) gives me error. I pass the name of the table as follow:
     EXEC sp_addarticle
           @publication = 'TTB', --THE NAME OF MY PUBLICATION
           'select top (1)' @article = 'Name from TableAdded Order by create_date Desc',
           'select top (1)' @source_object = 'Name from TableAdded Order by create_date Desc',
            @force_invalidate_snapshot = 1;
TableAdded is a table I have in my publisher which contains the name of the newly added table.
I believe it fails because the way I pass the name of the article to the store procedure is not correct. Can anyone please help me on that?
Kind regards
Amin

Yes, the way you add article is wrong.
you may try the below and let us know if you have any issues:
while loop begin (Get the values from TableAdded with status IsAdded=0)
Assign the values to variables like @article = Select top 1 Name from TableAdded where IsAdded=0
Call the sp_addarticle assigning the variable
update the Isadded flag in tableAdded for the name to 1
end while
BTB, Article configuration is supposed to be a one time configuration. Having said, you can easily configure through API. Caution, not sure what are you trying here, for adding new article, you may need to synch the data first in the above approach and should
carried out in the downtime.

Set a batch job for LP21 transaction

How to set up a batch job for LP21 transaction.

first you call LP21.
enter your selection criteria
click save button
give name and a description for the variant and save.
leave LP21
call SM36
enter a job name e.g. "MY Replenishment run"
click start conditons button
click date/time button
enter a date and a time when the job shall run
click button for periodic value
click daily
click save
click save
now your back at define job
click step button
enter a user that has the rights to run this job (maybe your own user id, maybe a functional user id)
enter the ABAP name e.g. RLLNACH1
enter the variant name of the variant you created earlier in LP21 (you can use F4 to find it)
enter language
SAVE
now you are in the step list overview.
you can leave this screen
back on the job definition just click the SAVE button
thats all

Creating a job for a procedure with an input parameter

Hi,
I want to create a job for a procedure ( sp_proc ) with a input parameter.
The input parameter is a date value.
As per the syntax for dbms_job.submit procedure;
dbms_job.submit (
job IN BINARY_INTEGER,
what IN VARCHAR2,
next_date IN DATE,
interval IN VARCHAR2 DEFAULT 'NULL',
no_parse IN BOOLEAN DEFAULT FALSE);
How should the procedure be declared in the 'what' parameter of the dbms_job.submit procedure ?
Please guide.
Thanks.

Hi,
You are wright, I have found this thread [DBMS_JOB -- how to pass parameters to the job|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:351033761220].
Regards,

How to create Background job for Dialog program

Hi Experts,
I have copied Standard tcode to Z-tcode (CS12 tcode).
Now my requirement is to create background job for this program (but program is not a 'E' type its 'I').
How we can schedule Dialog program to Background.
Pls suggest me.
Regards
SK

Hi do as below :
Reefer below :
Bakcground Job Creation
You will have to submit your report using Submit statement ,
then inside the submitted report write open_job.
Regards,
Uma

How to create a job for proces chain

Hi All,
I have a process chain that gets a trigger (.txt Trigger file) in AL11 inbound foulder.....
we will check for the same trigger in AL11...if it is available..we will trigger the chain using sm64 ...
now, i want to create a job for the same and schedule it automatically everyday.....
Any help will be appreciated....

Dear Sam2027,
you can set a "recurrence" within the schedule options where you can decide not only the day but also the time.
The recurrence can also be use in conjunction with your trigger .txt (which I believe it's a file event): in this case both of them need to be satisfied in order for your schedule to run.
I hope this will help.
Regards,
Samanta

How to create an RFC for MIGO transaction?

How to create an RFC for MIGO transaction?
I want my RFC to accept all details as accepted in MIGO transaction.
For the entered PO no, display the materials against it and allow user to enter the quantity for the same.
Then the user should be able to post the PO by executing the RFC.
Kindly revert asap.
Thanx in advance,
Bhakti

Put good movement header data in structure header
l_header-pstng_date = sy-datum.
l_header-doc_date = sy-datum.
l_header-ver_gr_gi_slip = space.
Assign goods movement code
l_wa_goodsmvt_code-gm_code = c_gm_code.
Add material, plant, and other line item details in
goods movement item table
l_wa_goodsmvt_item-material = l_wa_selected-matnr.
l_wa_goodsmvt_item-plant = l_wa_selected-werks.
l_wa_goodsmvt_item-stge_loc = l_wa_selected-lgort.
l_wa_goodsmvt_item-batch = l_wa_selected-charg.
l_wa_goodsmvt_item-move_type = l_wa_selected-mov_type.
l_wa_goodsmvt_item-entry_qnt = l_wa_selected-deviceid.
l_wa_goodsmvt_item-entry_uom = l_wa_selected-meins.
l_wa_goodsmvt_item-move_plant = l_wa_selected-zwerks.
l_wa_goodsmvt_item-move_stloc = l_wa_selected-zsloc.
l_wa_goodsmvt_item-move_batch = l_wa_selected-rec_batch.
l_wa_goodsmvt_item-serialno_auto_numberassignment = space.
APPEND l_wa_goodsmvt_item TO l_i_goodsmvt_item.
CLEAR l_wa_goodsmvt_item.
l_wa_serial_num-matdoc_itm = l_c_mat_doc_item.
l_wa_serial_num-serialno = l_wa_selected-sernr.
APPEND l_wa_serial_num TO l_i_serial_num.
CLEAR l_wa_serial_num.
To call BAPI BAPI_GOODSMVT_CREATE to transfer material of transfer
type one step
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
      goodsmvt_header       = l_header
      goodsmvt_code         = l_wa_goodsmvt_code
    IMPORTING
      goodsmvt_headret      = l_goodsmvt_headret
    TABLES
      goodsmvt_item         = l_i_goodsmvt_item
      goodsmvt_serialnumber = l_i_serial_num
      return                = l_i_return.
cheers
Aveek

HT204274 As a merchant where can i find receipt of a merchant for a transaction done through apple pay ?

As a merchant where can i find receipt of a merchant for a transaction done through apple pay ?

Receipts would be a function of your Point of Sale device, so you should contact your POS vendor.

Can a transaction be called in background dynamically using ABAP program??

Hi Experts,
Can a transaction be called in background dynamically using ABAP program without BDC???
Regards,
Mansi.

u can create job dynamically through programming..Try this sample code..
data: jobname like tbtcjob-jobname value
                             ' TRANSFER TRANSLATION'.
data: jobcount like tbtcjob-jobcount,
      host like msxxlist-host.
data: begin of starttime.
        include structure tbtcstrt.
data: end of starttime.
data: starttimeimmediate like btch0000-char1.
Job open
call function 'JOB_OPEN'
       exporting
            delanfrep        = ' '
            jobgroup         = ' '
            jobname          = jobname
            sdlstrtdt        = sy-datum
            sdlstrttm        = sy-uzeit
       importing
            jobcount         = jobcount
       exceptions
            cant_create_job = 01
            invalid_job_data = 02
            jobname_missing = 03.
if sy-subrc ne 0.
                                       "error processing
endif.
Insert process into job
SUBMIT zreport and return               << Here it is a static call but u can make it dynamic
                with p_param1 = 'value'
                with p_param2 = 'value'
                user sy-uname
                via job jobname
                number jobcount.
if sy-subrc > 0.
                                       "error processing
endif.
Close job
starttime-sdlstrtdt = sy-datum + 1.
starttime-sdlstrttm = '220000'.
call function 'JOB_CLOSE'
       exporting
            event_id             = starttime-eventid
            event_param          = starttime-eventparm
            event_periodic       = starttime-periodic
            jobcount             = jobcount
            jobname              = jobname
            laststrtdt           = starttime-laststrtdt
            laststrttm           = starttime-laststrttm
            prddays              = 1
            prdhours             = 0
            prdmins              = 0
            prdmonths            = 0
            prdweeks             = 0
            sdlstrtdt            = starttime-sdlstrtdt
            sdlstrttm            = starttime-sdlstrttm
            strtimmed            = starttimeimmediate
            targetsystem         = host
       exceptions
            cant_start_immediate = 01
            invalid_startdate    = 02
            jobname_missing      = 03
            job_close_failed     = 04
            job_nosteps          = 05
            job_notex            = 06
            lock_failed          = 07
            others               = 99.
if sy-subrc eq 0.
                                       "error processing
endif.
Regards,
JOy.

Urgent!! How to call a custom transaction or an ABAP program in BSP?

Urgent!! How to call a custom transaction or an ABAP program in BSP?
We are pretty new on BSP. Would be very appreciated if any expert here give us the detailed steps on how to build up the application to just call a custom transaction (e.g., t-code: ztest) or an ABAP program. Would we have to create a button or event handler to do that? And the detailed steps?
Thanks in advance and we will definately give you reward points!

hi Durairaj,
During the time to wait for your answer, we copied Bernd's code from your last link, but when activating it, get the 1st error msg:
Field "CLIENT" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement. "DATA" statement."DATA" statement. The error shows up here:
<td>
<htmlb:inputField id = "client"
value = "<%= client %>" />
</td>
Then we added Client to the page attribute and define it as type String, then get another error:
The field "EVENT" is unknown, but there is a field with the similar name "EVENT_ID"."EVENT_ID". This error shows up at the beginning in the Event Handler:
OnInputProcessing:
code
event handler for checking and processing user input and
for defining navigation
event handler for data retrieval
event = cl_htmlb_manager=>get_event( runtime->server->request ).
IF event->name = 'button' AND event->event_type = 'click'.
button_event ?= event.
How to resolve this unknown Event error, need to define in Page Attribute tab? but with what type?
Actually we only want to run an ABAP4 program in BSP, the code is complicated, could you show us an easy way of doing this in BSP?

Creation of IDOC through abap program.

hello all,
I hav created idoc through abap program. I hav used FM 'Master_idoc _distrribute'.this program creates an idoc but giving status 30. can any one tell me how to get status 03. I hav already created port, Logical sys,partner no.,distribution model.
My Program is as follows:
ABLES : CRMD_ORDERADM_I,CRMD_ORDERADM_H,CRMD_SCHEDLIN.
DATA : S_CTRL_REC LIKE EDIDC OCCURS 0 WITH HEADER LINE,"Idoc Control Record
       ORDER_NO TYPE CRMT_OBJECT_ID VALUE '5000000032'," SEGMENT ORDER DATA
       PRODUCT TYPE CRMT_ORDERED_PROD VALUE 'SRV_01',
       QUANTITY TYPE CRMT_SCHEDLIN_QUAN VALUE '1.000'.
DATA : ZORDER LIKE ZORDER_NUM OCCURS 0 WITH HEADER LINE.
DATA : T_EDIDD LIKE EDIDD OCCURS 0 WITH HEADER LINE.     "Data Records
DATA : T_COMM_IDOC LIKE EDIDC OCCURS 0 WITH HEADER LINE. "Generated Communication IDOc
CONSTANTS :
C_ZRZSEG1 LIKE EDIDD-SEGNAM VALUE 'ZORDER_NUM'.
PARAMETERS : C_MESTYP LIKE EDIDC-MESTYP DEFAULT 'ZORDER_IDOC2', "Message Type
              C_RCVPRT LIKE EDIDC-RCVPRT DEFAULT 'LS',          "Partner type of receiver
              C_LOGSYS LIKE EDIDC-RCVPRN DEFAULT 'BSNL_OUT',
              C_RCVPOR LIKE EDIDC-RCVPOR DEFAULT 'A000000006',
              C_SNDPOR LIKE EDIDC-SNDPOR DEFAULT 'SAPBCD0000',
              C_SNDPRN LIKE EDIDC-SNDPRN DEFAULT 'BCDCLNT100',
              C_IDOCTP LIKE EDIDC-IDOCTP DEFAULT 'ZORDER2',
              C_SNDPRT LIKE EDIDC-SNDPRT DEFAULT 'LS'.          "Destination System
***START-OF-SELECTION
START-OF-SELECTION.
PERFORM GENERATE_CONTROL_RECORD.
PERFORM SEND_IDOC.
*&      Form generate_control_record
FORM GENERATE_CONTROL_RECORD .
S_CTRL_REC-RCVPOR = C_RCVPOR. "Receiver Port
S_CTRL_REC-MESTYP = C_MESTYP. "Message type
S_CTRL_REC-IDOCTP = C_IDOCTP. "Basic IDOC type
S_CTRL_REC-RCVPRT = C_RCVPRT. "Partner type of receiver
S_CTRL_REC-SNDPOR = C_SNDPOR. "SENDER PORT
S_CTRL_REC-RCVPRN = C_LOGSYS. "Partner number of receiver
S_CTRL_REC-SNDPRT = C_SNDPRT. "Sender Partner type
S_CTRL_REC-SNDPRN = C_SNDPRN. "Sender Partner Number
APPEND S_CTRL_REC.
ENDFORM.                    " generate_control_record
*&      Form send_idoc
FORM SEND_IDOC.
ZORDER-ORDER_NO = ORDER_NO.
ZORDER-PRODUCT = PRODUCT.
ZORDER-QUANTITY = QUANTITY.
APPEND ZORDER.
T_EDIDD-SEGNAM = C_ZRZSEG1.
T_EDIDD-SDATA = ZORDER.
APPEND T_EDIDD.
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
    EXPORTING
      MASTER_IDOC_CONTROL            = S_CTRL_REC
    TABLES
      COMMUNICATION_IDOC_CONTROL     = T_COMM_IDOC
      MASTER_IDOC_DATA               = T_EDIDD
    EXCEPTIONS
      ERROR_IN_IDOC_CONTROL          = 1
      ERROR_WRITING_IDOC_STATUS      = 2
      ERROR_IN_IDOC_DATA             = 3
      SENDING_LOGICAL_SYSTEM_UNKNOWN = 4
      OTHERS                         = 5.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
    COMMIT WORK.
    LOOP AT T_COMM_IDOC.
      WRITE:/ 'IDoc Generated - ', T_COMM_IDOC-DOCNUM.
    ENDLOOP.
ENDIF.
ENDFORM.                    " send_idoc
I hav created segment , basic type,message typealso and release also .I also linked them.
Plz help me.
Hemlata

Hi Hemalatha,
Just call this Progream RSEOUT00 from your Zprogram and pass the basic parameters like IDOC number, Basic type,Partner number etc.
You can check the parameters by executing the Program RSEOUT00.
This Program will change the status of your IDOC 30 to 03.
Thanks.
Note:Reward Points if you find useful.

How to crete Button through ABAP programming

Hello Friends,
I am creating 2 selection screens through ABAP code and using them in my Tabstrip control also created through ABAP programming.
Can I also create button on the selection screen through abap programming. If yes then how, and how to assign funtion code and capture the Function Code???
Moderator Message: Read the below advice.
Edited by: kishan P on Dec 30, 2010 7:44 PM

Have a look at F1 help on SELECTION-SCREEN. There should be an example as well.

Assign loading / handling resource to location through ABAP program

Hello Experts,
I have a requirement where by I have to assign loading / unloading resource to a location through ABAP program. Need to assign the resource in Resources Tab in TP/VS section. Is there any function module or any method available to this?
Responses highly appreciated. Thanks in advance
Regards
Sandeep Patil

Hi all
I have the same requirement for the end user.
Is it a good idea update active Table of ODS behind an ABAP Program Z?, I understood that you can't have log history... and you can't delete request.. because you will not generate this..
We actually have one ODS that contain invoices... all the fields that contain the invoice..like material, vendor, etc.. was updated according to ABAp programa that we specify on start routine, each time that we need to update these fields we need to unload fros ODS to PSA and load again with dtp...
Let me copy more details:
Actually, we have an DSO that is updated each week, we load the information into different PSA, all of this PSA pass to ODS for one info source and transformation rule, in this transformation rule we have an ABAP rotine that have some validation and assign some values for different fields.
In this procees everthing look fine, actually If we need to update this information from DSO (that was loaded and the user need to update some fields) we need to download information from DSO to PSA and load again with DTP process, this was fine.
Actually the user want that this kind of changes will be apply on line, this mean that for example all the invoices that I have actually loaded into DSO need to be analyzed and update according new parameters that they specify in other tables.
The DSO is standard, and contain three basis tables, active, delta, modified.
My question is: Is it possible update directly table of active records of DSO with one Z program?? is it a good idea?, We want to discard the option of unload and load information each time that they need to update certain field that are calculated or updated whit the transformation rule or load.
Than you for your help.

Create a Job for a transaction dynamically through ABAP program.

Similar Messages

Maybe you are looking for