Create a message with empty file in Service pack 9

Hello.
I have the Service pack 9, and when PI read an emtpy file delete it inmediately.
Is there any way to create the message with an empty file? How?
Thank you.

Look into empty file handling in the file adapter. Below is from the sap help documentation for the file adapter.
Sender File adapter
Handling of Empty Files
Specify how empty files (length 0 bytes) are to be handled.
u25CB       Do Not Create Message
No XI messages are created from empty files.
The files are processed according to the selected Processing Mode.
For example, if the processing mode is Delete, empty files are deleted in the source directory.
u25CB       Process Empty Files
XI messages are created with an empty main payload.
The files are processed according to the selected Processing Mode.
u25CB       Skip Empty Files
No XI messages are created from empty files.
Empty files are skipped and remain in the source directory.
Receiver File adapter
Select the Handling of Empty Messages:
u25CB       Write Empty File
An empty file (length 0 bytes) is put in the target directory.
u25CB       Ignore
No file is put in the target directory.

Similar Messages

Mail dock icon does not create new message when a file is dragged onto it

After installing Snow Leopard, dragging a file to the the Mail icon in the dock no longer creates a new message with the file attached. Mail is brought forward as the active application, just no new message window.
This was the behavior in earlier versions of mail.
Is there a preference, or any other change, that can be changed to allow drag-and-drop of a file to create a new message with an attachment?
--James

There are some issues with drag and drop. I was having the same issue with Mail with SL, but I didn't check after 10.6.1. However, I just installed a new hard drive, and migrated. Mail works for me, now.
It didn't work with my 10.6 which had been upgraded with multiple builds in the beta. I assumed it was related to the other drag and drop issues. Now that I check it again, I don't think so.

How create 1 dvd with 2 file

how create 1 dvd with 2 file

As you probably know, DVD creation in Compressor and FCPX is very limited – and it only accommodates single tracks.
But there is no reason why you can't put multiple movies on a single timeline in FCP. Separate them with inserted gaps and add chapter markers to provide some level of navigation among them.
Good luck.
Russ

Having problems downloading itunes 10.5.2; box states windows installer issue. I have a 2005 with windows XP and service pack 2. Any ideas?

Just bought a new ipod touch for my daughter. It won't sync without itunes 10.5.2 loaded on our computer (a 2005 HP with Windows XP and service pack 2.) When I've tried to load 10.5.2, I get an error message box stating there is a problem with my Windows installer. I've tried loading the windows installer hot fix KB942288-v3-x86, but it didn't help. Any suggestion?

Hi Lorheak,
thanks for the quick reply. I had the same idea already yesterday. I use Norton Internet Security for a long time now without any problems. I think this a Apple or Microsoft problem, because the popup window which appear come from Windows DEP. I got no message from the firewall with any problem. I check the log files from Norton and Windows already but find nothing. This is a very strange problem. In the past I have had a lot of other problems with iTunes upgrades. Everytime I accept the installation of the newest version I got errors regarding missing "msi" files.
Greetings Gert

JSP PRECOMPILER IS NOT WORKING WITH WEBLOGIC 6.1 SERVICE PACK 5

          When i compile JSPs using JSP PreCompiler in weblogic 6.1
          ( Service Pack 4 ) , compilation is perfect.
          But when i precompile the same JSPs with weblogic 6.1 (Service Pack 5 )
          , i get compilation error.
          Variable Not Found error comes in service pack 5. But the same code works
          well with service pack 4.
          Could anyone help me ?
          [java] C:\CVSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WE
          NF\classes\jsp_servlet\_secure\__confirmation.java:280: cannot resolve symbol
          [java] symbol : variable yesLinkPageText
          [java] location: class jsp_servlet._secure.__confirmation
          [java] htmllink0.setPage(yesLinkPageText); //[ /secure/co
          rmation.jsp; Line: 32]
          [java] ^
          [java] C:\CVSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WE
          NF\classes\jsp_servlet\_secure\__confirmation.java:378: cannot resolve symbol
          [java] symbol : variable noLinkPageText
          [java] location: class jsp_servlet._secure.__confirmation
          [java] htmllink0.setPage(noLinkPageText); //[ /secure/con
          mation.jsp; Line: 37]
          [java] Error: compilation of jsp file /secure/confirmation.jsp (java file C
          VSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WEB-INF\classes
          p_servlet\_secure\__confirmation.java failed):
          [java] ^
          [java] null
          [java] 2 errors
          [java] Error: [jspc]: 1 file(s) failed:
          [java] /secure/confirmation.jsp
          [java] java.io.IOException: Compiler failed executable.exec(java.lang.String


Can you post the jsp page or a example which doesnt compile in sp5. It seems
          difficult to guage what the problem could be from looking at the error.
          --Nagesh
          "george vargeese" <[email protected]> wrote in message
          news:40c56502$1@mktnews1...
          >
          > When i compile JSPs using JSP PreCompiler in weblogic 6.1
          > ( Service Pack 4 ) , compilation is perfect.
          >
          > But when i precompile the same JSPs with weblogic 6.1 (Service Pack
          5 )
          > , i get compilation error.
          >
          > Variable Not Found error comes in service pack 5. But the same code
          works
          > well with service pack 4.
          >
          > Could anyone help me ?
          >
          >
          > [java]
          C:\CVSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WE
          > NF\classes\jsp_servlet\_secure\__confirmation.java:280: cannot resolve
          symbol
          >
          > [java] symbol : variable yesLinkPageText
          > [java] location: class jsp_servlet._secure.__confirmation
          > [java] htmllink0.setPage(yesLinkPageText); //[
          /secure/co
          > rmation.jsp; Line: 32]
          > [java] ^
          > [java]
          C:\CVSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WE
          > NF\classes\jsp_servlet\_secure\__confirmation.java:378: cannot resolve
          symbol
          >
          > [java] symbol : variable noLinkPageText
          > [java] location: class jsp_servlet._secure.__confirmation
          > [java] htmllink0.setPage(noLinkPageText); //[
          /secure/con
          > mation.jsp; Line: 37]
          > [java] Error: compilation of jsp file /secure/confirmation.jsp (java
          file C
          >
          VSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WEB-INF\classe
          s
          > p_servlet\_secure\__confirmation.java failed):
          > [java] ^
          > [java] null
          > [java] 2 errors
          > [java] Error: [jspc]: 1 file(s) failed:
          > [java] /secure/confirmation.jsp
          > [java] java.io.IOException: Compiler failed
          executable.exec(java.lang.String
          >
          >

ODAC driver 11.2.0.2.1 compatible with windows xp profession service pack 3

Dear all, I am looking at the online system requirement for ODAC driver 11.2.0.2.1 and bascially it says it is compatible with windows xp, but it doesnt specific whether it is compatible with windows xp service 3. Can we assume it is equally compatible with windows xp professional service pack 3.
Thank you

user13328581 wrote:
Dear all, I am looking at the online system requirement for ODAC driver 11.2.0.2.1 and bascially it says it is compatible with windows xp, but it doesnt specific whether it is compatible with windows xp service 3. Can we assume it is equally compatible with windows xp professional service pack 3.
Yes, you can assume that

Cannot download iTunes to PC with Windows XP and service pack 3. When I hit "download" it goes straight to the thank you screen but does not download anything!

Cannot download iTunes to PC with Windows XP and service pack 3. When I hit "download now" it goes stright to the "thanks for downloading" screen but downloads nothing.

I can't answer that. I'm just a user. Apple makes it decisions and does not share that with anyone here as you well know. Apple has also stopped supporting syncing contacts and calendar with the latest version of OS X, Mavericks. Users have to use iCloud. Many are not happy about that. Let Apple know how you feel here: www.apple.com/feedback and click on the appropriate link.

File adapter with empty files!

Hi guys,
My scenario is: File -> XI (BPM) -> JDBC
Under BPM I have a fork with two parallel receivers correlated and two sender file adapters for that. Those senders also have file conversion (.seq file to XML).
My problem is: in case of files coming empty, is it possible that senders file adapter generates error during file conversion? And/or generates errors during correlations?
If so, "I wouldnt like", because after receive these two files I have a switch to check if the file(s) coming empty and a control step to terminate the process in case of true. But this only works if no errors have occurred on the earlier steps!
At this moment I cant test it, so Im asking If anyone has faced an issue like this one?
Thanks in advance,
Ricardo.

Hi,
Which SP are you on?
Before Sp19 on XI 3.0 and SP10 on Pi, Empty Files are ignored by XI. The file adapter picks the file and if it is a empty file ( a zero byets file ) the file does not create a message at all for the file.
From Sp19, the file adapter has options that allow you to decide how to process the empty file. You can create an error message etc.
Regards
Bhavesh

How can I create a array with all files from a directory

How can I create a array of files or varchar with all files from a directory?

I thought the example could be improved upon. I've posted a solution on my blog that doesn't require writing the directory list to a table. It simply returns it as a nested table of files as a SQL datatype. You can find it here:
http://maclochlainn.wordpress.com/2008/06/05/how-you-can-read-an-external-directory-list-from-sql/

Dynamically creating oracle table with csv file as source

Hi,
We have a requirment..TO create a dynamic external table.. Whenever the data or number of columns change in the CSV file the table should be replaced with current data and current number of columns...as we are naive experienced people in oracle please give us a clear solution.. We have tried with a code already ..But getting some errors. Code given below..
thank you
we have executed this code by changing the schema name and table name ..Remaining everything same ...
Assume the following:
- Oracle User and Schema name is ALLEXPERTS
- Database name is EXPERTS
- The directory object is file_dir
- CSV file directory is /export/home/log
- The csv file name is ALLEXPERTS_CSV.log
- The table name is all_experts_tbl
1. Create a directory object in Oracle. The directory will point to the directory where the file located.
conn sys/{password}@EXPERTS as sysdba;
CREATE OR REPLACE DIRECTORY file_dir AS '/export/home/log';
2. Grant the directory privilege to the user
GRANT READ ON DIRECTORY file_dir TO ALLEXPERTS;
3. Create the table
Connect as ALLEXPERTS user
create table ALLEXPERTS.all_experts_tbl
(txt_line varchar2(512))
organization external
(type ORACLE_LOADER
default directory file_dir
access parameters (records delimited by newline
fields
(txt_line char(512)))
location ('ALLEXPERTS_CSV.log')
This will create a table that links the data to a file. Now you can treat this file as a regular table where you can use SELECT statement to retrieve the data.
PL/SQL to create the data (PSEUDO code)
CREATE OR REPLACE PROCEDURE new_proc IS
-- Setup the cursor
CURSOR c_main IS SELECT *
FROM allexperts.all_experts_tbl;
CURSOR c_first_row IS ALLEXPERTS_CSV.logSELECT *
FROM allexperts.all_experts_tbl
WHERE ROWNUM = 1;
-- Declare Variable
l_delimiter_count NUMBER;
l_temp_counter NUMBER:=1;
l_current_row VARCHAR2(100);
l_create_statements VARCHAR2(1000);
BEGIN
-- Get the first row
-- Open the c_first_row and fetch the data into l_current_row
-- Count the number of delimiter l_current_row and set the l_delimiter_count
OPEN c_first_row;
FETCH c_first_row INTO l_current_row;
CLOSE c_first_row;
l_delimiter_count := number of delimiter in l_current_row;
-- Create the table with the right number of columns
l_create_statements := 'CREATE TABLE csv_table ( ';
WHILE l_temp_counter <= l_delimiter_count
LOOP
l_create_statement := l_create_statement || 'COL' || l_temp_counter || ' VARCHAR2(100)'
l_temp_counter := l_temp_counter + 1;
IF l_temp_counter <=l_delimiter_count THEN
l_create_statement := l_create_statement || ',';
END IF;
END;
l_create_statement := l_create_statement || ')';
EXECUTE IMMEDIATE l_create_statement;
-- Open the c_main to parse all the rows and insert into the table
WHILE rec IN c_main
LOOP
-- Loop thru all the records and parse them
-- Insert the data into the table created above
END LOOP;

The initial table is showing errors and the procedure is created with compilation errors
After executing the create table i am getting the following errors
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-00554: error encountered while parsing access parameters
KUP-01005: syntax error: found "identifier": expecting one of: "badfile,
byteordermark, characterset, column, data, delimited, discardfile,
disable_directory_link_check, exit, fields, fixed, load, logfile, language,
nodiscardfile, nobadfile, nologfile, date_cache, processing, readsize, string,
skip, territory, varia"
KUP-01008: the bad identifier was: deli
KUP-01007: at line 1 column 9
ORA-06512: at "SYS.ORACLE_LOADER", line 19

Problem with „Empty-File Handling" in PI 7.11

Hi,
Iu2019m working in PI 7.11 with file adapter, Sender CC, option: Empty-File Handling: Process Empty Files.
What I want to do is giving target file the system-date, if the source file is empty.
But I always get a mapping error in RTWB: Premature end of file.
It seems that the payload is empty.
Any idea?
Thanks a lot in advance!
Rene Dong
Edited by: Rene Dong on Aug 31, 2010 4:20 PM

What I want to do is giving target file the system-date, if the source file is empty.
The error you are getting makes sense. You should do a check in the mapping, if the payload is empty then use brute force to pass the system date.

How to create a mapping with text file as my target

I need to create a mapping with source as a table and target as a text file.
I am using OWB 10g R2. with database Oracle10g.
Any one can help me to create a mapping with a text file as target.

Hi,
just create a File-Location and File-definition and use this file-operator as target object inside your mapping.
Regards jwehner

Send message with jar file

hello,
i'm want to send message using jar file, it is possible?
for example : java -jar post.jar
thnx.

For sure "java -jar post.jar" works as any other your desktop application.
So you can do everything from your java code, packed into post.jar

Problem with Xcelsius 2008 sp3 service pack chart slider into adobe flex

Hello All,
I tried to use the Xcelsius 2008 SP3 and created a Chart with a slider the new UI element which is introduced in the Service pack versions .. now i tried to implement the logic in Adobe flex builer 3 setting the compiler properties as hot fix 2.0 . Followed all the rules like creating an action script and creating MXML component.. Now when i try to embed the same swf whic is generated into webdynpro component it gives me error tht some classes or some events or some variables are missing..
According to my assumption i doubt wether the xcelsius 2008 sp3 will support the adobe flex 3 with this hot fix which i was initialy using .. So can anybody suggest me what can be doen to overcome this issue and make my new chart with slider run in my webdynpro abap :(...
Regards,
Sana.

Hi Sana,
You might be using Flex 3 sdk library files.
Just check in Properies of your Flex project -> Flex Build Path -> Library Path .
You might get the library files as Flex 3.*
If it is the case then change it to Flex 2.0.1 Hotfix 3.
now create a new project and compile your application and use the same swf.
Otherwise try to import any existing Flex 2 project folder with compiler flex 2 ver. then try the same swf in your xcelsius application.
Regards,
Vivek

Can't install with 64 bit XP, service pack 2

If I try the 64 bit installer, it says I need Vista or later. If I try the 32 bit installer, it doesn't install correctly.
What can I do?

Many thanks.
I think you've got two different types of problem going on at once here. Let's try clearing this second error out of the way first.
the second is "Error writing to file: C:\ Program Files(x86)\Common Files\Apple\Apple Application Support\Webkit.resources\inspector\Images\timelinePillGreen.png. Verify that you still have acess to that directory."
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through without that particular error message afterwards? (Whether this works or not, we still might have to deal with the system services message.)

Create a message with empty file in Service pack 9

Similar Messages

Maybe you are looking for