Create a Summarized custom report having information of Client Status, Deployments and patching

Hi,
I have to create a custom report in SCCM 2012 R2. The single report will contain a summarised details of
1. Number of SCCM clients & there health.
2. OSD/Software Distribution/Client Installation performed within a period of time.
3. Patching (Report should have separate rows for different OS, application which are having ADR's & details of number of machines patched using each ADR.)
4. Create a Weekly Subscription for the Report.
Is is possible to create such a custom report. If possible then please help.
Regards
Pallavi

Hi,
>>Number of SCCM clients & there health.
The report in the blog below could help you.
Report | System Health – Configuration Manager Client
For the updates part, you could use the build-in reports in Software Updates - B Deployment Management folder for reference.
Note:
Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

Is there a way to create a SD Customer from Employee information?

Hi!
Is there a way to create a SD Customer from Employee information?
We have implemented HR, I know that we can transfer the employee information to ECC using the transaction PFAL, also we know that the transaction PRAA is used to create vendors from employee information.
Is there a similar transaction to create a sold to party from employee information?
Thanks!

Hi Christian,
Please have a look at the F1 help for the origin field:
"If the field is empty when creating a sales document (standard setting)
the partner functions are determined from those partner functions given
in the sold-to party customer master (Table KNVP). If the system can not
determine all functions, it enters the number of the sold-to party (SP)
for the remaining partner functions of partner type customer (KU).
Maintain this field if you want a specific partner to be determined that
is not in the partner screen of the sold-to party master.
Use the following entries:
A - if a credit management partner function (e.g. CM) should be taken
   directly from the credit representative table (T024P). The credit
   representative must not then be created in the customer master.
-   For determining partners of partner type personnel
B - if functions should be taken from a customer hierarchy (Standard
   setting for customer hierarchy partners)
C - if you want to take the partner function exclusively from the
   partner screen entries in the customer master. If no partner is
   specified in the customer master for this function, it will not be
   used in the document. In this case you may have to extend the
   mandatory partner functions in the document manually.
    As this setting can lead to incomplete documents, the functions SP,
    BP, PY and SH, which are not absolutely necessary for sales and
    distribution processing, are not used.
-   Determining partners of partner type customer
D - if the personnel number of the system user should be used as the
   function, e.g. for sales executives. This function is only carried
   out online, not in the background. Therefore you should not carry out
   this setting for mandatory partner functions.
-   Determining partners of partner type Personnel
E - if the partner function should be replaced with a contact person
   from the contact person screen for the corresponding partner (table
   KNVK). If another contact person has been specified on the partner
   screen than the one on the contact person screen, this is not copied
   into the document.
-   For determining partners of partner type contact person
F - if it should be possible to determine the contact partners not only
   from the contact person screen but also from the partner screen of
   the partner with the current source partner function.
-   Determining partners of partner type contact person"
Also, please have a look in note 752091 where explain the partner rule.
Regards
Ruy Castro

I'm looking for an app that will allow me to upload my contracts and forms to my iPad, fill in a customer's personal information, sign them, save them and email them.

I'm looking for an app that will allow me to upload my contracts and forms to my iPad, fill in a customer's personal information, sign them, save them and email them. I looked at easySign, Filemaker, FM Touch, Sign Docs, Zosh, Exzact, Mi-Co

FormConnect (http://itunes.apple.com/us/app/formconnect/id432653695?mt=8&ls=1) can handle the filling out, signing, saving and emailing the contracts/forms but uploading the contract and the form is going to be a challenge because you’re dealing with paper documents that have to be scanned. If you can convert the scanned documents into an OCR program, you might be able to copy and paste the contract without having to retype it but the form itself is probably going to have to be recreated. Alternatively, you could use a document annotation program such as iAnnotate and mark up the contract with ink.

Submitting Customized Report Request, Completed with Error Status

Dear All ,
Good Day ,,
1- I am using Oracle Application 11.5.0
2- Application And Data Base Server Unix AI
3- created Oracle Report file (i testes all sql statmets using toad , successfly)
5- Tested the report , passed parameters , it is running successfully .
6- Cpied the reports to the next path (E:\oracle\testappl\per\11.5.0\reports\US)
7- Created Executable file (has the same name of the rdf file)
8- Created Concurrent program contains the same Executable file and the output format is 'PDF', Style = 'Landscape' , printer = 'noprint' , the added the parameters (the same named in the rdf file)
9- Added the Concurrent program to the HRMS 'Reports & Process'
10- From the HRMS Manager Responsibility , i submitted the request , passed the parameters .
11- Refresh , Pending , Runing , phase 'Completed' , Status 'Error'
12-View Log .. :
Human Resources: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
KU_PAYSLIB module: KU_PAYSLIB
Current system time is 31-MAR-2010 23:29:55
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
TIME_PERIOD_ID='442'
ORGANIZATION_ID='1424'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AR8MSWIN1256
stat_low = 84
stat_high = 0
emsg:was terminated by signal 4
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program was terminated by signal 4
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 3192426.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 31-MAR-2010 23:29:56
12-When i change the output format to XML it completes with 'Normal Status' but , the next Log is appearing :
Human Resources: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
KU_PAYSLIB module: KU_PAYSLIB
Current system time is 31-MAR-2010 23:36:19
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
TIME_PERIOD_ID='442'
ORGANIZATION_ID='1424'
Environment will now switch to UTF-8 code-set.
Parts of this log file may not display correctly
as a result. This is an expected behavior.
XML_REPORTS_XENVIRONMENT is :
/apps/oracle/testora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /apps/oracle/testora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
REP-3000: Internal error starting Oracle Toolkit.
Report Builder: Release 6.0.8.28.0 - Production on Wed Mar 31 23:36:20 2010
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT   -------------
Printing output file.
Request ID : 3192428
Number of copies : 0
Printer : noprint
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 31-MAR-2010 23:36:21
Thanks A lot

>
emsg:was terminated by signal 4
>
For this issue , pl see the solutions in this related thread - Re: The Concurrent Manager and Programs is failing random
>
REP-3000: Internal error starting Oracle Toolkit.
>
This typically indicates that an X server is not running on the Unix server. Pl see these MOS Docs
200474.1 - Comprehensive REP-3000 Troubleshooting and Overview Guide
207532.1 - Troubleshooting Tips for REP-3000 Error when Running PDF/POSTSCRIPT/HTML Reports
Searching on this topic in these forums will also retrieve many hits.
HTH
Srini

How do I create a folder or report from a query with a union and parameters

I have created folders with unions but I am having difficulty coverting a query with a union and parameters.
The following works great in SQL*Developer without parameters, but I want to change to use parameters for the year and quarter and use it in Discoverer:
SELECT TO_CHAR(NVL(AV.TAX_ID,999999999),'000000000') FEID,
AV.FIRM_NAME VENDOR_NAME,
AV.BIDCLASS CONTRACT_CODES,
AV.AWAMT AWARD_AMOUNT,
AV.SOL_MODE FORMAL_INFORMAL,
AV.CERT BUSINESS_ENTITY,
AV.ETHNICITY ETHNICTY,
AV.PO_NUMBER_FORMAT CONTRACT,
SUM(VP.INVOICE_AMOUNT) AMOUNT_PAID_$
FROM CONFIRM.VSTATE_PAID_AWARD_VENDORS AV,
CONFIRM.VSTATE_VENDOR_PAYMENTS VP
WHERE ( ( AV.PO_NUMBER = VP.PO_NUMBER
AND AV.VENDOR_ID       = VP.VENDOR_ID ) )
AND (TO_CHAR(VP.PAYMENT_DATE,'Q') = '4')
AND ( TO_CHAR(VP.PAYMENT_DATE,'YYYY') = '2009' )
GROUP BY TO_CHAR(NVL(AV.TAX_ID,999999999),'000000000'),
AV.FIRM_NAME,
AV.BIDCLASS,
AV.AWAMT,
AV.SOL_MODE,
AV.CERT,
AV.ETHNICITY,
AV.PO_NUMBER_FORMAT
union
SELECT TO_CHAR(NVL(AV2.TAX_ID,999999999),'000000000') FEID,
AV2.FIRM_NAME VENDOR_NAME,
AV2.BIDCLASS CONTRACT_CODES,
AV2.AWAMT AWARD_AMOUNT,
AV2.SOL_MODE FORMAL_INFORMAL,
AV2.CERT BUSINESS_ENTITY,
AV2.ETHNICITY ETHNICTY,
AV2.PO_NUMBER_FORMAT CONTRACT,
0 AMOUNT_PAID_$
FROM CONFIRM.VSTATE_PAID_AWARD_VENDORS AV2
WHERE
not exists (SELECT 'X'
              FROM CONFIRM.VSTATE_VENDOR_PAYMENTS VP2
             WHERE av2.po_number = vp2.po_number
                   AND (TO_CHAR(VP2.PAYMENT_DATE,'Q') = '4')
                   AND ( TO_CHAR(VP2.PAYMENT_DATE,'YYYY') = '2009' ))
AND (TO_CHAR(AV2.AWDATE,'Q') = '4')
AND (to_CHAR(AV2.AWDATE,'YYYY') = '2009')
GROUP BY TO_CHAR(NVL(AV2.TAX_ID,999999999),'000000000'),
AV2.FIRM_NAME,
AV2.BIDCLASS,
AV2.AWAMT,
AV2.SOL_MODE,
AV2.CERT,
AV2.ETHNICITY,
AV2.PO_NUMBER_FORMAT Can someone provide a solution?
Thank you,
Robert

Hi,
You can take the parameters to the select so that you will be able to create conditions over them.
Try to use this SQL instead of your and in the discoverer workbook create the conditions and parameters:
SELECT TO_CHAR(NVL(AV.TAX_ID,999999999),'000000000') FEID,
AV.FIRM_NAME VENDOR_NAME,
AV.BIDCLASS CONTRACT_CODES,
AV.AWAMT AWARD_AMOUNT,
AV.SOL_MODE FORMAL_INFORMAL,
AV.CERT BUSINESS_ENTITY,
AV.ETHNICITY ETHNICTY,
AV.PO_NUMBER_FORMAT CONTRACT,
TO_CHAR(VP.PAYMENT_DATE,'YYYY') P_YEAR,
TO_CHAR(VP.PAYMENT_DATE,'Q') P_QTR
SUM(VP.INVOICE_AMOUNT) AMOUNT_PAID_$
FROM CONFIRM.VSTATE_PAID_AWARD_VENDORS AV,
CONFIRM.VSTATE_VENDOR_PAYMENTS VP
WHERE ( ( AV.PO_NUMBER = VP.PO_NUMBER
AND AV.VENDOR_ID = VP.VENDOR_ID ) )
--AND (TO_CHAR(VP.PAYMENT_DATE,'Q') = '4')*
--AND ( TO_CHAR(VP.PAYMENT_DATE,'YYYY') = '2009' )*
GROUP BY TO_CHAR(NVL(AV.TAX_ID,999999999),'000000000'),
AV.FIRM_NAME,
AV.BIDCLASS,
AV.AWAMT,
AV.SOL_MODE,
AV.CERT,
AV.ETHNICITY,
AV.PO_NUMBER_FORMAT ,
TO_CHAR(VP.PAYMENT_DATE,'YYYY') P_YEAR,
TO_CHAR(VP.PAYMENT_DATE,'Q') P_QTR
union
SELECT TO_CHAR(NVL(AV2.TAX_ID,999999999),'000000000') FEID,
AV2.FIRM_NAME VENDOR_NAME,
AV2.BIDCLASS CONTRACT_CODES,
AV2.AWAMT AWARD_AMOUNT,
AV2.SOL_MODE FORMAL_INFORMAL,
AV2.CERT BUSINESS_ENTITY,
AV2.ETHNICITY ETHNICTY,
AV2.PO_NUMBER_FORMAT CONTRACT,
TO_CHAR(VP.PAYMENT_DATE,'YYYY') P_YEAR,
TO_CHAR(VP.PAYMENT_DATE,'Q') P_QTR
0 AMOUNT_PAID_$
FROM CONFIRM.VSTATE_PAID_AWARD_VENDORS AV2
WHERE
not exists (SELECT 'X'
FROM CONFIRM.VSTATE_VENDOR_PAYMENTS VP2
WHERE av2.po_number = vp2.po_number
AND (TO_CHAR(VP2.PAYMENT_DATE,'Q') = TO_CHAR(VP.PAYMENT_DATE,'Q') )
AND ( TO_CHAR(VP2.PAYMENT_DATE,'YYYY') = TO_CHAR(VP.PAYMENT_DATE,'YYYY') ))
--AND (TO_CHAR(AV2.AWDATE,'Q') = '4')*
--AND (to_CHAR(AV2.AWDATE,'YYYY') = '2009')*
GROUP BY TO_CHAR(NVL(AV2.TAX_ID,999999999),'000000000'),
AV2.FIRM_NAME,
AV2.BIDCLASS,
AV2.AWAMT,
AV2.SOL_MODE,
AV2.CERT,
AV2.ETHNICITY,
AV2.PO_NUMBER_FORMAT,
TO_CHAR(VP.PAYMENT_DATE,'YYYY') P_YEAR,
TO_CHAR(VP.PAYMENT_DATE,'Q') P_QTR
Tamir

Custom report to work in different languages EN and ZH.

Hi,
I wrote the report which has to work on languages EN and ZH(chinese language).
It is working fine in EN, When I login with language 'ZH', the selecion screen is not displaying in Chinese language. Is there anything to do to display the selection screen in ZH language?
When I change the text elements and selecion texts in report in ZH language, it is reflecting the same for EN language as well.
Is there anything to do to solve this?
Thanks
Deepthi

Hi,
Did you maintaied the Translations for that text...
if not try this ...T.Code: SE63 and follow the below path
Translation >R/3 Enterprise> Short Texts --> S3-ABAP Texts --> REPT Text Elements
Then give the Program name as an Object Name and Chooses the languages..
There you can Translate all the required texts for that program.
Thanks
shankar

How to extract information from client security certificates and display it

Hi guys,
just wanted to know is it possible to extract information from an digital security certificate and get that displayed on top level navigation of the portal. So for ex. I want to extract the clients name and code and area from where they come from to be displayed on top level.
thanks
anton

RoopeshV wrote:
Hi,
The below code shows how to read from txt file and display in the perticular fields.
Why have you used waveform?
Regards,
Roopesh
There are so many things wrong with this VI, I'm not even sure where to start.
Hard-coding paths that point to your user folder on the block diagram. What if somebody else tries to run it? They'll get an error. What if somebody tries to run this on Windows 7? They'll get an error. What if somebody tries to run this on a Mac or Linux? They'll get an error.
Not using Read From Spreadsheet File.
Use of local variables to populate an array.
Cannot insert values into an empty array.
What if there's a line missing from the text file? Now your data will not line up. Your case structure does handle this.
Also, how does this answer the poster's question?

Error creating custom reports. Permissions issue with custom reports

I am having permission issues with reports. I am building a new Configuration Manager 2012 infrastructure and I have configured the Site server on Server1 and the DB is on Server2. Server2 also hosts the Reporting Point and SSRS roles/features. If
I look in Monitoring at the Site Status and Component Status are all green no issues with the setup.
Running SQL 2008 SP2 (no CUs). I have a service account that I used to install Configuration Manager and SQL. This service account is running the SQL service on Server2 and i am using the same account as the Reporting Services Point Account.
I log into the SCCM console with a different user account, lets call it Admin1. This account is a member of the Full Administrator role. I can run any built in report.
When I open the SSRS website and try to create a custom report I connect the DataSource using Windows Authentication. So the Datasource is connecting using the logged in users account. In this case Admin1. I test the connection and it connects fine.
I test this query. (Select * from v_R_System) I only have about 10 workstations discovered so the report shouldn’t be very big. I get an error “The Select permission was denied on the object ‘v_R_System’, Database ‘CM_XXX’, schema ‘dbo’. (Microsoft sql server,
Error: 229)”
I have fixed the SELECT permission error by going into the database (using SQL Management studio) and granting Admin1 Select rights to the Configuration Manager database. I can now run the above query and make custom reports.
My 2<sup>nd</sup> problem is that other members of the Full Administrator role cannot run these custom reports unless I go into the database and grant them the SELECT permission.
Question:
Should I have to manually go into the database to add SELECT permissions(i could use a group)? shouldnt Configuration Manager take care of this for me?
Maybe the built in reports use the SQL service account rights and the custom ones do not? Am I doing something wrong with the Datasource when I create these custom reports?
What is the correct process for creating custom reports?

I think i am getting closer to a solution. After the Custom report is created. i can go back into the report. Delete the DataSource. Then browse for a dataSource. there is a datasource located in http://server2/reportserver/ConfigMgr_XXX/
That datasource is used by all builtin reports. if you view the properties on the Credentials tab it is set to "do not use credentials" and the option is greyed out / cannot be changed.
it looks like i still need the SELECT permissions on the database to create the report initially but at least i have solved the problem with viewing these reports.
Can anyone confirm that what i did is correct?

Is it Possible to Create Custom Report in SOLMAN

Hi Experts,
I am new to SOLMAN. I have one question. Is it Possible to create our own custom Reports in SOLMAN. If possible
tell me the variuos types of reports and how we can create.

Hi
SAP Solution Manager can be used for entire ALM so you need to clearly specify which area and what report you are talking about
http://www.sdn.sap.com/irj/sdn/alm-getting-started
General transaction code for reporting is
SOLAR_EVAL
it helps you to build the entire project report phase wise or for service desk or for charms or test management etc
check if that you are looking for.
regards
Prakhar

Need to create a report having 40 columns using XML Publisher

Hi XML Report Gurus,
I have a weird requirement. I need to create a XML Publisher Report having 40 columns. This report would be a CSV Report.
How can i create a RTF(Template) in MS-Word having 40 columns ?? I just cannot accomodate the columns, they start wrapping down.
Can i create a template in Excel and map the data columns to the Excel columns?
I can create a Oracle PL/SQL package and generate the output, but I want to know if I can achieve the same thing using BI Reports.
Appreciate your feedback
Kiran Ramachandra
[email protected] __.____._

What I did, I had the column titles in the XML file as data, like
<COL01>Employee Name</COL01>
<COL02>Employee Number</COL02>
etc.
I did it this way because columns were variable, and up to the user to pick. If you have fixed set of columns, you still can include their names in the XML file, this way you will be able to display then as fields on the template.

List of Customer having information about dunning procedure in M.Data

Hi all,
Could any one tell me hoe to get list of customer/vendor having information about the dunning procedure in Master Data..
thanks in advance..

For customers check table KNB5 and for Vendor LFB5 at SE16
Srinivas

SLM Custom Reports

Hi all,
I am new to iReport and creating custom reports with this Sentinel SDK,
took me a while to get it working, but since I have I really like the
way it has been done.
I need some help getting started with a report I need to create, we call
it an "Audit Report", but really, it is just information regarding what
workflows have been kicked off and who has actioned the workflow and the
outcome of the workflow. It will need to be more detailed eventually,
but I just need help getting started.
I am looking at the SLMEventQueries documentation I found:
http://www.novell.com/developer/slm_event_queries.html
This talks about using the "Log Manager Event report template", but I
cannot find that in the SDK... Is it somewhere else?
Thanks in advance for any assistance! Also, if there are any other
tutorials to help me better understand creating custom reports, I would
really appreciate a link.
Regards,
Craig Cikara
ccikara
ccikara's Profile: https://forums.netiq.com/member.php?userid=506
View this thread: https://forums.netiq.com/showthread.php?t=46818

Craig,
Welcome to the forum. Before getting into this too much I am going to
possibly tell about some things you've already seen and decided were not
for you, but since you did not mention them (and since they are often not
understood or recognized) I'll do so anyway. Please forgive this
intrusion if I'm relating known information.
Log Manager and Sentinel 7 both changed how reporting can be customized in
a big way. With previous versions, and with the previous reporting
infrastructure, life was painful and hard and required customizing every
stinkin' report to make it work for anything other than different time
ranges (and sometimes event severities as I recall). All in all, it was
terrible and deserved to be scrapped as it was.
The new way lets you create a lot of basic reports without using any
customization tools like iReport, though you can of course create whatever
using iReport and the SDK. What is often the case, though, is that the
report simply needs to display certain events and certain fields from
those events. Sometimes those just need to be counts of events and other
times they need to include a bunch of details.
Sentinel 7 as well as Log Manager let you use the filters you already use
to find events in order to create a new custom report. The documentation
covers this in
https://www.netiq.com/documentation/...a/bjzrhf4.html
under the 'Save the Query as a Jasper Report' section. Basically you
create your filter and then save it as a report choosing an appropriate
visualization ('Event Details' is a common one, as is 'Event Summary').
Also, you may want to see if the Identity Manager collector's Collector
Pack includes a report that meets your needs assuming the customization
above does not.
Good luck.

Error while running a custom report in OIM

Hi All,
I have created a new custom report for OIM and written a stored procedure for that. But while running the report from Admin console, its throws the below error:
java.sql.SQLException: ORA-00911: invalid character
ORA-06512: at "IDM.XL_EXCEPTION", line 149
ORA-06512: at line 1
ERROR,19 Jun 2011 22:09:31,665,[XELLERATE.WEBAPP],Class/Method: ReportAction/displayTabularReport encounter some problems: Error executing stored procedure
Thor.API.Exceptions.tcAPIException: Error executing stored procedure
Line 149 : DBMS_OUTPUT.PUT_LINE('select stmt ='|| select_stmt);
"select_stmt" is a select query based on the OIM tables.
Please advice.

Seems like there is a invalid character in your SQL (Report's store procedure). Could you share with me whole content of this "select_stmt" variable?
regards,
Thiago L Guimaraes

New customized report using PLD or QUERY PRINT LAYOUT to show customers onl

I am working with a Software Developing firm as an SAP Consultant.
Please tell me how to create a new customized report displaying various details as required by the client in the report using PLD or Query Print Layout.
Please help me asap.

Hi,
You can create queries using the Query Generator or the Query Wizard tools.
After you have created your own queries, you can link them to a required print layout.
for user reports.Look at:
Tools --> Queries --> Query Print Layout
Set there your query reports.
Printing User-Defined Queries
After you had linked a user-defined query to a user report template, you can now print it
according to its linked print layout.
There are two ways for printing your user-defined queries.
1. Using the Query Print Layout window:
Select from the upper menu Tools 􀃆 Queries 􀃆 Query Print Layout.
Click the Reports tab page.
Click to highlight the required query you would like to print.
Click on the printer icon or select from the upper menu File 􀃆 Print.
The user-defined query is printed according to its linked print layout.
2. Using the Queries Manager window:
Click the Queries Manager icon on the upper tool bar.
Click to highlight the required query you would like to print.
Click on the printer icon or select from the upper menu File 􀃆 Print.
The user-defined query is printed according to its linked print layout.
Note! You can also print preview user-defined queries. Do so by selecting the Print
Preview option as described in the methods above for printing your query.
Btw, you could search the manual training files relate to query PLD in http://www.service.sap.com/smb
Rgds,

Custom Report Query - Patches install on specific computer AND date installed

I'm looking to create a 2 custom reports that show installed. I have a similar report already but it shows patches needing to be installed.
Devices in a collection with columns for total number security patches installed (I'll break them out further by severity)
Breakdown of each patch installed on a computer (from report 1) and the date installed. (may also include severity, KB article, description etc. I already have these fields)
Essentially I'm looking for the query to pull this data and add to an existing report format I'm already using.
Ideas?

Garth,
Thanks for the reply. I've flipped the 2->3 in the report and that gave me what I needed.
The other piece was the date installed. This was not in either report. I did however find it under the database view ucsa.LastStatusChangeTime which my report was already pulling.

Create a Summarized custom report having information of Client Status, Deployments and patching

Similar Messages

Maybe you are looking for