Create and configure reports server in Oracle 9iAS 1.0.2.2.2 on solaris 10

Hi All,
I have installed Oracle 9iAS 1.0.2.2.2 on Solaris 10. I want to create and configure a new reports server.
Please help as I can't see anything on metalink.
Thanks/Regards
Dirish

In fact when installing 9iAS 1.0.2.2.2, the default report server name looks like this REP60_TEST.INTNET.MU.
My original tnsnames.ora was like this
REP60_TEST.INTNET.MU =
(ADDRESS = (PROTOCOL = tcp)(HOST = test.intnet.mu)(PORT = 1950))
I added an alias to the tnsnames.ora file
now my tnsnames.ora is like this
REP60TEST,REP60_TEST.INTNET.MU =
(ADDRESS = (PROTOCOL = tcp)(HOST = test.intnet.mu)(PORT = 1950))
This is working fine
Thanks

Similar Messages

  • Install and configure report service on Oracle Application Server 10g

    i want to know how to install and configure report service on Oracle Application Server 10g Release 3 (10.1.3.1.0)
    Thanks

    the case is that we developed an ADF Application, so we want to deploy it on the latest version of Oracle Application server.
    our application communicate with Oracle reports (run oracle reports from our Application) as there are no Oracle report products for JEE Application.
    so if there are not report service that can run on Oracle Application Server 10g Release 3 (10.1.3.1.0),
    what is the other choices that oracle supports that can help us in this case ???

  • Getting error when i am creating and tesing data server in oracle (Physical

    Hi,
    Getting error when i am creating and tesing data server in oracle (Physical Architecture) in topology manager.
    Please anybody help me on this.
    Java.net.ConnectException: Connection refused: connect
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
         at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
         at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
         at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
         at java.net.Socket.connect(Socket.java:529)
         at java.net.Socket.connect(Socket.java:478)
         at java.net.Socket.<init>(Socket.java:375)
         at java.net.Socket.<init>(Socket.java:189)
         at com.sunopsis.graphical.l.pm.a(pm.java)
         at com.sunopsis.graphical.l.pm.s(pm.java)
         at com.sunopsis.graphical.l.pm.g(pm.java)
         at com.sunopsis.graphical.l.pm.a(pm.java)
         at com.sunopsis.graphical.l.pm.a(pm.java)
         at com.sunopsis.graphical.l.iz.actionPerformed(iz.java)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
         at java.awt.Component.processMouseEvent(Component.java:6263)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
         at java.awt.Component.processEvent(Component.java:6028)
         at java.awt.Container.processEvent(Container.java:2041)
         at java.awt.Component.dispatchEventImpl(Component.java:4630)
         at java.awt.Container.dispatchEventImpl(Container.java:2099)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
         at java.awt.Container.dispatchEventImpl(Container.java:2085)
         at java.awt.Window.dispatchEventImpl(Window.java:2478)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
         at java.awt.Dialog$1.run(Dialog.java:1046)
         at java.awt.Dialog$3.run(Dialog.java:1098)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.awt.Dialog.show(Dialog.java:1096)
         at java.awt.Component.show(Component.java:1563)
         at java.awt.Component.setVisible(Component.java:1515)
         at java.awt.Window.setVisible(Window.java:842)
         at java.awt.Dialog.setVisible(Dialog.java:986)
         at com.sunopsis.graphical.l.pm.q(pm.java)
         at com.sunopsis.graphical.l.pm.<init>(pm.java)
         at com.sunopsis.graphical.frame.b.jh.bx(jh.java)
         at com.sunopsis.graphical.frame.bo.w(bo.java)
         at com.sunopsis.graphical.frame.bo.d(bo.java)
         at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
         at java.awt.Component.processMouseEvent(Component.java:6263)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
         at java.awt.Component.processEvent(Component.java:6028)
         at java.awt.Container.processEvent(Container.java:2041)
         at java.awt.Component.dispatchEventImpl(Component.java:4630)
         at java.awt.Container.dispatchEventImpl(Container.java:2099)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
         at java.awt.Container.dispatchEventImpl(Container.java:2085)
         at java.awt.Window.dispatchEventImpl(Window.java:2478)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

    HI,
    check the jdbc url.
    The datbase and the listener to which you are connecting are suppose to be up and running.
    For testing try and connect using sqlplus from the machine you are trying to make a connection,
    Reshma

  • Create a New Report Server in Oracle 10g AS(10.1.2.0.2) in IBM-AIX

    Hi Friends,
    I am using Oracle 10g AS(10.1.2.0.2)on IBM-AIX.
    I would like to create a new Report Server(standalone).Please suggest and give the Metalink Document Number as well.
    Regards,
    Arun

    Doc ID: 459177.1

  • Managing and configuring log files for Oracle 9ias

    Hi all,
    I'm wondering where I can find documentation on managing and configuring log files like:
    ORACLE_HOME/admin/ sid/*dump/* ORACLE_HOME/assistants/opca/install.log ORACLE_HOME/webcache/logs/*
    ORACLE_HOME/dcm/logs/*
    ORACLE_HOME/ldap/log/*
    ORACLE_HOME/opmn/logs/*
    ORACLE_HOME/sysman/log/*
    ORACLE_HOME/j2ee/ OC4J_instance/log/*/* ORACLE_HOME/config/schemaload.log ORACLE_HOME/config/useinfratool.log
    because I didn't find anything in document like:
    Oracle9 i Application Server
    Administrator�s Guide
    Release 2 (9.0.2)
    May 2002
    Part No. A92171-02
    So, if anyone has any idea...
    Thanks in advance

    Does anyone know how or if it is possible to send the stdout and/or stderr to the log4j type of logging? I already capture the stdout and stderr to the flat file. But I would like to timestamp every line to compare and diagnose problems with each application that encounters problems. Each web app is using log4j to their own application log4j log file. When they encounter errors or resource draining problems, I would like to see the container logs and see what was occuring inside the container at around that same time.
    Any ideas?

  • Getting error when i am creating and tesing data server in ODI

    Hi,
    Getting error when i am creating and tesing data server in oracle (Physical Architecture) in topology manager ODI.
    Please anybody help me on this.
    Java.net.ConnectException: Connection refused: connect
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
         at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
         at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
         at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
         at java.net.Socket.connect(Socket.java:529)
         at java.net.Socket.connect(Socket.java:478)
         at java.net.Socket.<init>(Socket.java:375)
         at java.net.Socket.<init>(Socket.java:189)
         at com.sunopsis.graphical.l.pm.a(pm.java)
         at com.sunopsis.graphical.l.pm.s(pm.java)
         at com.sunopsis.graphical.l.pm.g(pm.java)
         at com.sunopsis.graphical.l.pm.a(pm.java)
         at com.sunopsis.graphical.l.pm.a(pm.java)
         at com.sunopsis.graphical.l.iz.actionPerformed(iz.java)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
         at java.awt.Component.processMouseEvent(Component.java:6263)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
         at java.awt.Component.processEvent(Component.java:6028)
         at java.awt.Container.processEvent(Container.java:2041)
         at java.awt.Component.dispatchEventImpl(Component.java:4630)
         at java.awt.Container.dispatchEventImpl(Container.java:2099)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
         at java.awt.Container.dispatchEventImpl(Container.java:2085)
         at java.awt.Window.dispatchEventImpl(Window.java:2478)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
         at java.awt.Dialog$1.run(Dialog.java:1046)
         at java.awt.Dialog$3.run(Dialog.java:1098)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.awt.Dialog.show(Dialog.java:1096)
         at java.awt.Component.show(Component.java:1563)
         at java.awt.Component.setVisible(Component.java:1515)
         at java.awt.Window.setVisible(Window.java:842)
         at java.awt.Dialog.setVisible(Dialog.java:986)
         at com.sunopsis.graphical.l.pm.q(pm.java)
         at com.sunopsis.graphical.l.pm.<init>(pm.java)
         at com.sunopsis.graphical.frame.b.jh.bx(jh.java)
         at com.sunopsis.graphical.frame.bo.w(bo.java)
         at com.sunopsis.graphical.frame.bo.d(bo.java)
         at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
         at java.awt.Component.processMouseEvent(Component.java:6263)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
         at java.awt.Component.processEvent(Component.java:6028)
         at java.awt.Container.processEvent(Container.java:2041)
         at java.awt.Component.dispatchEventImpl(Component.java:4630)
         at java.awt.Container.dispatchEventImpl(Container.java:2099)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
         at java.awt.Container.dispatchEventImpl(Container.java:2085)
         at java.awt.Window.dispatchEventImpl(Window.java:2478)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
    Thanks,
    Krish

    So are you getting the same error when you try from the installed agent or the tool (Local agent)? Is your agent on the same machine or different machine. If so, does that particular machine can connect to the database?
    Also, are you using the same JDBC driver that you are using in SQLDeveloper? Same URL?
    Typically, connection refused error appears with wrong instance or wrong port. Try telnet-ing the in the database server and db port. See what happens there!!! The java stack that you provided here is not an SQL exception, it is related to socket creation. It has less to do with JDBC and more to do with physical resources like machine, port and permission.

  • How to Create A standalone Report Server and replce by in process server

    Hi all,
    I am new to oracle reports 10g, I have installed oracle applicaction server 10.1.2.0.2 on RHEL4 now i want to create a standalone report server and replace it by the in-process report server . I searched the net to get a proper step by step guide to do the above but dint got the same can anybody guide to step by step process to do the same and also file which are to be edited i user sh rwserver.sh -install server name bath=yes command and sh rwserver.sh server name bath=yes & commad to start it but i am not able to see the same in the enterprise manager . Thanks in advance...
    Also please tell me if it is recommeded by oracle to replace the standalone by inprocess server.

    Hi do i need to fire the following the command then
    sh rwserver.sh -install server name bath=yes
    sh rwserver.sh server name bath=yes &
    are these correct
    and then fire the following command to register it to enterprize manager
    ORACLE_HOME/bin/addNewServerTarget.sh reports_server_name
    Please correnct me if i am wrong
    ANd i already fired (sh rwserver.sh server name bath=yes & ) command which in turn create a fine name server name.conf in th ORACLE_HOME/report/conf
    now can i fire ( sh rwserver.sh -install server name bath=yes ) this command or there is some issues in that.
    what should be sequence of firing these commands
    and to test it after completing the activity
    Edited by: Mohammed Afzal on Jun 30, 2011 4:26 PM
    Edited by: Mohammed Afzal on Jun 30, 2011 4:28 PM

  • Create and configure an OPC IO server programatically in LV 2010

    Can I create and configure an OPC IP server programatically using LabVIEW 2010?  Currently I create a process (using code) then wire the process name to the LV express VI to create an IO server that I have manually set the attributes for.  Then I can create my shared variables and bind them to the OPC items.  I would like to eliminate the manual configuration of the attributes to give my VI greater flexibility.  Is this possible in LabVIEW 2010?
    Thanks in advance,
    AJL

    Hi mani.siet.eng,
    You can write data to OPC tags using LabVIEW. There are multiple ways to do this such as binding shared variables (which you can create programmatically) to the tags or by using DataSockets. Information on how to use OPC in LabVIEW can be found in this KnowledgeBase article.
    If you have any more specific questions, I would recommend creating a new thread since the last activity on this one was over three years ago.
    Best Regards,
    Matthew B.
    Applications Engineer
    National Instruments

  • How to create and configure proxies in ADF mobile using OWSM client agent?

    Hi
    Can anyone please tell me how to create and configure proxies in ADF mobile application using Oracle Web Services Manager (OWSM) Lite Mobile ADF Application Agent. I read it in mobile document that,
    For secured web services, the user credentials are dynamically injected using ADF Mobile uses Oracle Web Services Manager (OWSM) Lite Mobile ADF Application Agent to create and configure proxies, as well as to request services through the proxies. The user credentials are injected into the OWSM enforcement context when proxies are configured.
    I am new with this OWSM, can anyone please give me some hints like how to proceed further for implementing authentication using OWSM lite mobile ADF Application Agent??
    Thanks in advance
    Raj

    Hi Juan
    The demo is very useful, and in that Shay describes about the remote login using a regular ADF webapplication as a secured one and deploying it into the server. But I would like to know how to create a local login using OWSM client agent? .
    Without creating a regular ADF webapplication, how can i call secured webservices(i.e., by using OWSM client agent how to create and configure proxies to call secured webservice, where the user credentials are injected into webservice request by OWSM client as mentioned in ADF mobile document)??
    Regards
    Raj

  • How to configure report server in 9iDS

    I am usin P4 and trying to configure report server for 9iDS. But, surprisingly there is no conf file in the \orant\reports\server path after complete installation of 9iDS.
    How should I configure the report server?
    Take care,
    Tarek

    tarek,
    we released a new whitepaper last week about configuring the reports services with iDS for testing your reports. you can find this whitepaper in the reports section here on OTN.
    however. you can either create the reports config file manually or it is created automatically for you if you start up a server and there is no corresponding config file already defined.
    regards,
    philipp

  • How to properly create and configure SharePoint 2013 Search service with PowerShell?

    Hello Forum,
    I have installed SharePoint 2013 across three tier servers:
    WFE Server  (Of course, SharePoint is installed here. Bsically this is just a Web server)
    APP Server  (Of course, SharePoint is installed here + Central Admin + Service Apps).
    SQL Server  
    I now want to create and configure the Search service, obviously on the APP Server, But of course the search functionality should work correctly on the WFE server to.
    I want to do this via a proper PowerShell script. I found Spence Harbar's script on: (http://www.harbar.net/articles/sp2013mt.aspx), But it has three problems, and they are as follows:
    1) Spence Harbar himself literally stated on his article that this script is for: "deploying on a single server farm", But what if I have three tier servers? Could anyone please help me out in suggesting the required tweaks in the
    script?
    2) By default Search uses the SP_Farm account, So, How can I change the script to use other dedicated account for the search service e.g. SP_SearchAcc ?
    3) How can I modify the script to specify a default Search center?
    4) Apart from all the three aforementioned point - Is the script missing anything? 
    I would greatly appreciate your inputs - Thanks !

    the only differences are where you place the components.  if you are doing a small server farm with a 1-1-1, most likely you just need to change the script so that you set the index and query processing component on the front end, but the others on
    the app server.  just a 2 second update... just keep in mind this will work, but I am making several assumptions without any knowledge of your farm, users, capabilities. 
    generally, there would be more of a breakout on the topology than that, but im guessing for this farm that you wont have dedicated search servers.  also, a lot depends on # users (rps really), # items in index, size of VMs (RAM for query processing,
    Disk for index, etc, etc), and making sure the topology works for your particular environment and needs. 
    if you want more detailed topology help, which aligns as closely as possible to "best practices" (not that those exist in SharePoint, go ahead and provide the total # users, average/peak RPS for search, current index size, content source types,
    VM specs RAM, CPU, #/Size of drives, HA concerns/priority (obviously isn't, since only 1-1-1)
    Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

  • [Forum FAQ] How to install and configure Windows Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely

    As we all know,
    the Windows Server Essentials Experience role is available in Windows Server 2012 R2 Standard and Windows Server 2012 R2 Datacenter. We can add the Windows Server
    Essentials Experience role in Server Manager or via Windows PowerShell.
    In this article, we introduce the steps to install and configure Windows
    Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely. For better analyze, we divide this article into two parts.
    Before installing the Windows Server Essentials Experience Role, please use
    Get-WindowsFeature
    PowerShell cmdlet to ensure the Windows Server Essentials Experience (ServerEssentialsRole) is available. (Figure 1)
    Figure 1.
    Part 1: Install Windows Server Essentials Experience role locally
    Add Windows Server Essentials Experience role
    Run Windows PowerShell as administrator, then type
    Add-WindowsFeature ServerEssentialsRole cmdlet to install Windows Server Essentials Experience role. (Figure 2)
    Figure 2.
    Note: It is necessary to configure Windows Server Essentials Experience (Post-deployment Configuration). Otherwise, you will encounter following issue when opening Dashboard.
    (Figure 3)
    Figure 3.
      2. Configure Windows Server Essentials Experience role
    (1)  In an existing domain environment
    Firstly, please join the Windows Server 2012 R2 Standard computer to the existing domain through the path:
    Control Panel\System\Change Settings\”Change…”\Member of. (Figure 4)
    Figure 4.
    After that, please install Windows Server Essentials Experience role as original description. After installation completed, please use the following command to configure Windows
    Server Essentials:
    Start-WssConfigurationService –Credential <Your Credential>
    Note: The type of
    Your Credential should be as: Domain-Name\Domain-User-Account.
    You must be a member of the Enterprise Admin group and Domain Admin group in Active Directory when using the command above to configure Windows Server Essentials. (Figure 5)
    Figure 5.
    Next, you can type the password for the domain account. (Figure 6)
    Figure 6.
    After setting the credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 7)
    Figure 7.
    By the way, you can use
    Get-WssConfigurationStatus
    PowerShell cmdlet to
    get the status of the configuration of Windows Server Essentials. Specify the
    ShowProgress parameter to view a progress indicator. (Figure 8)
    Figure 8.
    (2) In a non-domain environment
    Open PowerShell (Run as Administrator) on the Windows Server 2012 R2 Standard and type following PowerShell cmdlets: (Figure 9)
    Start-WssConfigurationService -CompanyName "xxx" -DNSName "xxx" -NetBiosName "xxx" -ComputerName "xxx” –NewAdminCredential $cred
    Figure 9.
    After you type the commands above and click Enter, you can create a new administrator credential. (Figure 10)
    After creating the new administrator credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 11)
    After a reboot, all the configurations will be completed and you can open the Windows Server Essentials Dashboard without any errors. (Figure 12)
    Figure 12.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Part 2: Install and configure Windows Server Essentials Experience role remotely
    In an existing domain environment
    In an existing domain environment, please use following command to provide credential and then add Server Essentials Role: (Figure 13)
    Add-WindowsFeature -Name ServerEssentialsRole
    -ComputerName xxx -Credential DomainName\DomainAccount
    Figure 13.
    After you enter the credential, it will start install Windows Server Essentials role on your computer. (Figure 14)
    Figure 14.
    After the installation completes, it will return the result as below:
    Figure 15.
    Next, please use the
    Enter-PSSession
    cmdlet and provide the correct credential to start an interactive session with a remote computer. You can use the commands below:
    Enter-PSSession –ComputerName
    xxx –Credential DomainName\DomainAccount (Figure 16)
    Figure 16.
    Then, please configure Server Essentials Role via
    Add-WssConfigurationService cmdlet and it also needs to provide correct credential. (Figure 17)
    Figure 17.
    After your credential is accepted, it will update and prepare your server. (Figure 18)
    Figure 18.
    After that, please type “Y” to continue to configure Windows Server Essentials. (Figure 19)
    Figure 19.
    2. In a non-domain environment
    In my test environment, I set up two computers running Windows Server 2012 R2 Standard and use Server1 as a target computer. The IP addresses for the two computers are as
    below:
    Sevrer1: 192.168.1.54
    Server2: 192.168.1.53
    Run
    Enable-PSRemoting –Force on Server1. (Figure 20)
    Figure 20.
    Since there is no existing domain, it is necessary to add the target computer (Server1) to a TrustedHosts list (maintained by WinRM) on Server 2. We can use following command
    to
    add the TrustedHosts entry:
    Set-Item WSMan:\localhost\Client\TrustedHosts IP-Address
    (Figure 21)
    Figure 21.
    Next, we can use
    Enter-PSSession
    cmdlet and provide the correct credential to start an interactive session with the remote computer. (Figure 22)
    Figure 22.
    After that, you can install Windows Server Essentials Experience Role remotely via Add-WindowsFeature ServerEssentialsRole cmdlet. (Figure 23)
    Figure 23.
    From figure 24, we can see that the installation is completed.
    Figure 24.
    Then you can use
    Start-WssConfigurationService cmdlet to configure Essentials Role and follow the steps in the first part (configure Windows Server Essentials Experience in a non-domain environment) as the steps would be the same.
    The figure below shows the status of Windows Server Essentials.
    Figure
    25.
    Finally, we have successfully configured Windows Server Essentials on Server1. (Figure 26)
    Figure 26.
    More information:
    [Forum
    FAQ] Introduce Windows Powershell Remoting
    Windows Server Essentials Setup Cmdlets
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

  • To create and configure a community in a customized UI

    Hi,
    We are currently working on a customized UI where the client can create and configure a community in WCI.
    Is there any possibility to call several special APIs like 'Get, Create and Modify Experience Definition', 'Get, Create and Modify Community Template', 'Create Rule Manager' and so on.
    If there is, please give me an example or correlative API docs.
    Thanks for any help in advance.

    Yes this is all possible.
    The only api you could use to perform these functions is the server api. But you will find there is very little documentation on this api. Your best bet is to use something like the .net reflector to "take a peek" at how the server api is used within the portal views and models or just download the UICI Portal source code.
    If you are feeling a bit crazy, go to google and type "iptsession" and hit I'm Feeling Lucky :-)
    you should get through to the server api reference documentation. Most people struggle with first initialising the api and creating a session. I believe there is a blog post about this online. Use the method described above and I am sure you will find what you are looking for.

  • Upgrade from Oracle Web Server to Oracle 9ias(9.0.4).

    Hi,
    I want to upgrade Oracle Web Server to Oracle 9ias(9.0.4).
    Can anybody please tell me what are the pre-requisites for this and where can I find the documentation for this?
    Regards - Sachin

    Hi Sachin,
    If you are indeed running Oracle (Web) Application Server 4.0.8.2 or similar, the best way to upgrade will depend on what applications that you are running.
    There are upgrade guides from Oracle (Web) Application Server to Oracle Internet Application Server 1.0 as well as guides from 8i to 9i and 10g avaliable under documentation here at OTN.
    The latest version avaliable right now is 10.1.2.0.2. It might make sense to go to 10.1.2.0.2 than to 9.0.4 at this time.
    Regards,
    Mathias

  • How to Create and Deploy Web Services Using Oracle 9i JDeveloper

    Hi,
    My Question is how to create and deploy Web Services using Oracle 9i JDeveloper.Anybody please give me a detailed Reply.Please Reply to [email protected]
    Hopr to Hear From you,
    Regards,
    G Sreekumar

    You could use datasources. You should do this in your BC4J Configuration. Then when deploying your applicaiton use the command -installDataSource (from admin.jar) to create the right datasource.
    You could probably use the name of your connection + "DS" so you can also use it locally in JDeveloper as JDev seesm to create this automaticly for your Connections.

Maybe you are looking for

  • Sync/Async communication in JMS adapter without BPM

    Hi, as of SP19 XI's JMS adapter offers this new feature for Sync/Async communication through JMS Adapter modules instead of using a BPE. Now I would be interested to know if anybody has already successfully used this feature especially using WebSpher

  • Problem with an AIR application on OS X 10.8

    Hello everyone, Let me start with a small explanation of what I am and what I do: I am currently working under the alter ego named "Boompje" to provide roughly 100.000 people a working Mac client for a major online game (named League of Legends). The

  • SALV_WD_TABLE

    HI to all! I'm using the 'SALV_WD_TABLE' component I won't to implement an search in the Table how can I navigate to the row where the item is find and how can I select the cell in program. Thanks Hermann

  • Get photos from camera: custom folder setting?

    When I use Bridge to get photos from my camera, can I tell it to put them in specific folders according to the date the photo was taken? For instance, instead of telling Bridge to download photos with a filename mask like YYYY-MM-DD could I tell it t

  • Socialize HD Problems Driving Me Crazy!

    Hello, Thank you very much for your time. I received my Socialize HD Camera and installed it. All seemed to be going well, and at this very moment in time, only video works. I cannot seem to make the sound work, which is driving me crazy. The microph