Create Article Master through inbound IDoc (Normal Flow of Inbound IDOC)
Hi All,
I am new to Inboud IDoc.
I have a file on application server. In program (SE38), I read that file through "open data set"..." close data set.". now the file is in internal table. where should i pass that data (i mean in which structures). and what should i do to create an article in SAP System. I mean what should i write in program ? which Fn. module called ? etc..
My requirement is that using Inbound IDoc ARTMAS05 post the data from application server.
I am aware of all ALE configuration and all WE30, WE31, WE81, WE82.....
could anyone brief the basic steps of inbound IDOC ARTMAS05 and INFREC01.
please help me out.
valuable contribution is appreciated.
Thanks & Regards,
for this you need to write a program .
once you get the data form file to Internal table. then
pass your internal table data to idoc control and idoc dta
like pass all segemnts data then pass all segments data to this FM
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
EXPORTING
master_idoc_control = wa_edidc
TABLES
communication_idoc_control = gt_edidc
master_idoc_data = gt_edidd
Similar Messages
-
Creating Vendor Master through Bapi
Hi All,
Please help me out in creating vendor master using Bapi and also send me the program logic.
Thanks in Advance,
Sridhar ChHi Sridhar,
Refer to the following and award points if useful.BAPI is like using standard function modules.We will populate the parameters and handle errors from that.See the code below which is vendor debit posting.You can get an idea by the following code.
See the start of selection if this is confusing to you and understand the usage
* TABLES
TABLES: VBAK,
ADR6,
TRDYSE01CM.
* INCLUDE
INCLUDE ZZUTI_STD_HEADER_FOOTER. "Standard header and footer
* TYPES DECLARATION
TYPES:
BEGIN OF T_CRMEMO,
VBELN TYPE VBAK-VBELN,
POSNR TYPE VBAP-POSNR,
ERDAT TYPE VBAK-ERDAT,
AUART TYPE VBAK-AUART,
AUGRU TYPE VBAK-AUGRU,
WAERK TYPE VBAK-WAERK,
VKORG TYPE VBAK-VKORG,
VTWEG TYPE VBAK-VTWEG,
SPART TYPE VBAK-SPART,
VDATU TYPE VBAK-VDATU,
BSTNK TYPE VBAK-BSTNK,
BSARK TYPE VBAK-BSARK,
BSTDK TYPE VBAK-BSTDK,
AEDAT TYPE VBAK-AEDAT,
BUKRS_VF TYPE VBAK-BUKRS_VF,
MATNR TYPE VBAP-MATNR,
ZMENG TYPE VBAP-ZMENG,
ZIEME TYPE VBAP-ZIEME,
END OF T_CRMEMO,
BEGIN OF T_CRMEMO_CHANGE,
VBELN(90) TYPE C,
POSNR TYPE VBAP-POSNR,
ERDAT TYPE VBAK-ERDAT,
AUART TYPE VBAK-AUART,
AUGRU TYPE VBAK-AUGRU,
WAERK TYPE VBAK-WAERK,
VKORG TYPE VBAK-VKORG,
VTWEG TYPE VBAK-VTWEG,
SPART TYPE VBAK-SPART,
VDATU TYPE VBAK-VDATU,
BSTNK TYPE VBAK-BSTNK,
BSARK TYPE VBAK-BSARK,
BSTDK TYPE VBAK-BSTDK,
AEDAT TYPE VBAK-AEDAT,
BUKRS_VF TYPE VBAK-BUKRS_VF,
MATNR TYPE VBAP-MATNR,
ZMENG TYPE VBAP-ZMENG,
ZIEME TYPE VBAP-ZIEME,
END OF T_CRMEMO_CHANGE,
BEGIN OF T_MVKE,
MATNR TYPE MVKE-MATNR,
VKORG TYPE MVKE-VKORG,
VTWEG TYPE MVKE-VTWEG,
MTPOS TYPE MVKE-MTPOS,
END OF T_MVKE,
BEGIN OF T_ORDERS,
VBELV TYPE VBFA-VBELV,
POSNV TYPE VBFA-POSNV,
VBELN TYPE VBFA-VBELN,
POSNN TYPE VBFA-POSNN,
VBTYP_N TYPE VBFA-VBTYP_N,
END OF T_ORDERS,
BEGIN OF T_EKPO,
EBELN TYPE EKKO-EBELN,
EBELP TYPE EKPO-EBELP,
WAERS TYPE EKKO-WAERS,
MENGE TYPE EKPO-MENGE,
MEINS TYPE EKPO-MEINS,
NETPR TYPE EKPO-NETPR,
PEINH TYPE EKPO-PEINH,
mwskz TYPE EKPO-mwskz,
TXJCD TYPE EKPO-TXJCD,
END OF T_EKPO,
BEGIN OF T_EKBE,
EBELN TYPE EKBE-EBELN,
EBELP TYPE EKBE-EBELP,
ZEKKN TYPE EKBE-ZEKKN,
VGABE TYPE EKBE-VGABE,
GJAHR TYPE EKBE-GJAHR,
BELNR TYPE EKBE-BELNR,
BUZEI TYPE EKBE-BUZEI,
END OF T_EKBE,
BEGIN OF T_RBKP,
BELNR TYPE RBKP-BELNR,
GJAHR TYPE RBKP-GJAHR,
BLDAT TYPE RBKP-BLDAT,
BUDAT TYPE RBKP-BUDAT,
XBLNR TYPE RBKP-XBLNR,
LIFNR TYPE RBKP-LIFNR,
RMWWR TYPE RBKP-RMWWR,
WMWST1 TYPE RBKP-WMWST1,
XRECH TYPE RBKP-XRECH,
STBLG TYPE RBKP-STBLG,
END OF T_RBKP,
BEGIN OF T_CDHDR,
OBJECTCLAS TYPE CDHDR-OBJECTCLAS,
OBJECTID TYPE CDHDR-OBJECTID,
CHANGENR TYPE CDHDR-CHANGENR,
UDATE TYPE CDHDR-UDATE,
UTIME TYPE CDHDR-UTIME,
END OF T_CDHDR,
BEGIN OF T_CDPOS,
OBJECTCLAS TYPE CDHDR-OBJECTCLAS,
OBJECTID TYPE CDHDR-OBJECTID,
CHANGENR TYPE CDHDR-CHANGENR,
TABNAME TYPE CDPOS-TABNAME,
TABKEY TYPE CDPOS-TABKEY,
FNAME TYPE CDPOS-FNAME,
CHNGIND TYPE CDPOS-CHNGIND,
VALUE_NEW TYPE CDPOS-VALUE_NEW,
VALUE_OLD TYPE CDPOS-VALUE_OLD,
END OF T_CDPOS,
BEGIN OF T_CHANGE_DOCS,
OBJECTCLAS TYPE CDHDR-OBJECTCLAS,
OBJECTID TYPE CDHDR-OBJECTID,
CHANGENR TYPE CDHDR-CHANGENR,
UDATE TYPE CDHDR-UDATE,
UTIME TYPE CDHDR-UTIME,
TABNAME TYPE CDPOS-TABNAME,
TABKEY TYPE CDPOS-TABKEY,
FNAME TYPE CDPOS-FNAME,
CHNGIND TYPE CDPOS-CHNGIND,
VALUE_NEW TYPE CDPOS-VALUE_NEW,
VALUE_OLD TYPE CDPOS-VALUE_OLD,
END OF T_CHANGE_DOCS,
BEGIN OF T_SUCCESS,
crmemo TYPE VBAK-vbeln,
cmemo TYPE VBAK-vbeln,
orders TYPE VBAK-vbeln,
po TYPE VBAK-vbeln,
miro_no TYPE VBAK-vbeln,
text(20) TYPE C,
END OF T_SUCCESS,
BEGIN OF T_ERROR,
crmemo TYPE VBAK-vbeln,
cmemo TYPE VBAK-vbeln,
orders TYPE VBAK-vbeln,
po TYPE VBAK-vbeln,
miro_no TYPE VBAK-vbeln,
text(100) TYPE C,
END OF T_ERROR.
* WORKAREA DECLARATION
DATA:
WA_CRMEMO TYPE T_CRMEMO,
WA_CRMEMO_CHANGE TYPE T_CRMEMO_CHANGE,
WA_MVKE TYPE T_MVKE,
WA_ORDERS TYPE T_ORDERS,
WA_CMEMO TYPE T_ORDERS,
WA_PO TYPE T_ORDERS,
WA_EKPO TYPE T_EKPO,
WA_EKBE TYPE T_EKBE,
WA_EKBE_TEMP TYPE T_EKBE,
WA_RBKP TYPE T_RBKP,
WA_RBKP_TMP TYPE T_RBKP,
WA_CDHDR TYPE T_CDHDR,
WA_CDPOS TYPE T_CDPOS,
WA_CHANGE_DOCS TYPE T_CHANGE_DOCS,
WA_CRMEMO_MR8M TYPE T_CRMEMO,
WA_SUCCESS TYPE T_SUCCESS,
WA_ERROR TYPE T_ERROR,
WA_SUCCESS_MR8M TYPE T_SUCCESS,
WA_ERROR_MR8M TYPE T_ERROR.
*--Work area for all the internal tables used for Sending Mail
DATA :
WA_OBJPACK TYPE SOPCKLSTI1,
WA_OBJHEAD TYPE SOLISTI1,
WA_OBJBIN TYPE SOLISTI1,
WA_OBJTXT TYPE SOLISTI1,
WA_RECLIST TYPE SOMLRECI1 .
DATA:
*-- Structure to hold Invoice Header Data
x_docheader LIKE bapi_incinv_create_header,
*-- Structure to hold Reversal Posting Data
x_rev_post LIKE BAPI_INCINV_FLD.
* INTERNAL TAABLE DECLARATION
DATA:
IT_CRMEMO TYPE STANDARD TABLE OF T_CRMEMO WITH HEADER LINE,
IT_CRMEMO_CHANGE TYPE STANDARD TABLE OF T_CRMEMO_CHANGE WITH HEADER LINE,
IT_MVKE TYPE STANDARD TABLE OF T_MVKE WITH HEADER LINE,
IT_CRMEMO_MIRO TYPE STANDARD TABLE OF T_CRMEMO WITH HEADER LINE,
IT_CRMEMO_MR8M TYPE STANDARD TABLE OF T_CRMEMO WITH HEADER LINE,
IT_ORDERS TYPE STANDARD TABLE OF T_ORDERS WITH HEADER LINE,
IT_CMEMO TYPE STANDARD TABLE OF T_ORDERS WITH HEADER LINE,
IT_PO TYPE STANDARD TABLE OF T_ORDERS WITH HEADER LINE,
IT_EKPO TYPE STANDARD TABLE OF T_EKPO WITH HEADER LINE,
IT_EKBE TYPE STANDARD TABLE OF T_EKBE WITH HEADER LINE,
IT_EKBE_TEMP TYPE STANDARD TABLE OF T_EKBE WITH HEADER LINE,
IT_RBKP TYPE STANDARD TABLE OF T_RBKP WITH HEADER LINE,
IT_CDHDR TYPE STANDARD TABLE OF T_CDHDR WITH HEADER LINE,
IT_CDPOS TYPE STANDARD TABLE OF T_CDPOS WITH HEADER LINE,
IT_CHANGE_DOCS TYPE STANDARD TABLE OF T_CHANGE_DOCS WITH HEADER LINE,
IT_SUCCESS TYPE STANDARD TABLE OF T_SUCCESS WITH HEADER LINE,
IT_ERROR TYPE STANDARD TABLE OF T_ERROR WITH HEADER LINE,
IT_SUCCESS_MR8M TYPE STANDARD TABLE OF T_SUCCESS WITH HEADER LINE,
IT_ERROR_MR8M TYPE STANDARD TABLE OF T_ERROR WITH HEADER LINE.
*-- Internal table to hold Invoice Item Data
DATA:BEGIN OF it_itemdata OCCURS 0.
INCLUDE STRUCTURE bapi_incinv_create_item.
DATA:END OF it_itemdata.
*-- Internal table to hold Invoice Acct Assignment Data
DATA:BEGIN OF it_ACCOUNTingdata OCCURS 0.
INCLUDE STRUCTURE BAPI_INCINV_CREATE_ACCOUNT.
DATA:END OF it_accountingdata.
*-- Internal table to hold BAPI return data
DATA: BEGIN OF it_return OCCURS 0.
INCLUDE STRUCTURE bapiret2. "Return Parameter.
DATA: END OF it_return.
*-- Internal table to hold BAPI return data
DATA: BEGIN OF it_return_mr8m OCCURS 0.
INCLUDE STRUCTURE bapiret2. "Return Parameter.
DATA: END OF it_return_mr8m.
*--MAIL related Internal tables
DATA: X_DOC_CHNG TYPE SODOCCHGI1, " document attributes
IT_OBJPACK TYPE STANDARD TABLE OF SOPCKLSTI1, " attachment table
IT_OBJHEAD TYPE STANDARD TABLE OF SOLISTI1, " object header table
IT_OBJBIN TYPE STANDARD TABLE OF SOLISTI1, " binary table
IT_OBJTXT TYPE STANDARD TABLE OF SOLISTI1, " object text
IT_RECLIST TYPE STANDARD TABLE OF SOMLRECI1, " mail recipients
it_compressed_list TYPE STANDARD TABLE OF SOLI,
it_pdf_list TYPE STANDARD TABLE OF TLINE,
it_pdf TYPE tline OCCURS 10 WITH HEADER LINE,
it_html TYPE solisti1 OCCURS 10 WITH HEADER LINE,
*-- Internal table for MIME data (in CHAR format)
it_temp TYPE bapiqcmime OCCURS 10 WITH HEADER LINE,
*-- Internal table for storing data
it_mime(255) TYPE c OCCURS 10 WITH HEADER LINE.
* GLOBAL VARIABLES *
DATA: V_PGM_ID TYPE SY-REPID, " Program id
v_zterm TYPE lfb1-zterm, " Payment Terms
v_text(75) TYPE c, " To store error or success text
v_itemno(6) TYPE n, " To Increment Item No. for BAPI
v_docnr LIKE bapi_incinv_fld-inv_doc_no, " For MIRO document number
v_year1 LIKE bapi_incinv_fld-fisc_year, " For MIRO Fiscal year
v_spono type TSP01-RQIDENT, " For Spool No.
v_type type SOODK-OBJTP, " For Spool Type
V_CRMEMO_QTY TYPE VBAP-ZMENG, " For CR Memo Qty.
V_LINE_AMOUNT TYPE EKPO-NETPR, " For CR Memo Item Qty.
V_GROSSAMT TYPE EKPO-NETPR, " For CR Memo Grand Qty.
v_tax_per(3) type n, " For CR Memo Tax amount %
v_tax_amt TYPE EKPO-NETPR, " For CR Memo Tax amount
v_flag(1) type c, " Flag to process fruther
v_tot_s_mr8m TYPE i, " For MR8M Success Records
v_tot_e_mr8m TYPE i, " For MR8M Error Records
V_DATE TYPE SY-DATUM, " For Sel. Screen Date
V_DATE2(10) TYPE C, " For EMail Date
V_TIME(10) TYPE C, " For EMail Time
V_TIME2(10) TYPE C, " For EMail Time
V_INFO(100) TYPE C, " For EMail Body Text
V_TABLE_LINES TYPE SY-TABIX, " To Increment Email Count
V_TEXT2 TYPE STRING , " For EMail Id text
v_lines TYPE i, " To Store PDF Lines
v_temp(500) TYPE c, " To Convert to 255 char format
v_offset TYPE p, " To Convert to 255 char format
v_lineslen TYPE i, " To Convert to 255 char format
v_mimelen TYPE i, " To Convert to 255 char format
v_tabix type sy-tabix. " To Convert to 255 char format
* CONSTANTS *
CONSTANTS:
C_X(1) TYPE C VALUE 'X', " Constant X or Flag
C_E(1) TYPE C VALUE 'E', " For Error check
c_v(1) TYPE C VALUE 'V', " For PO Docs
c_o(1) TYPE C VALUE 'O', " For Order Docs
c_c(1) TYPE C VALUE 'C', " For Credit Memo Docs
c_k(1) TYPE C VALUE 'K', " For CR Memo Docs
c_u(1) TYPE C VALUE 'U', " For Change tables Update
c_ali(3) TYPE C VALUE 'ALI', " For ALI Format
c_vbak(4) TYPE C VALUE 'VBAK', " For Change docs table
C_01(2) TYPE C VALUE '01', " For Serial No. & Reversal Reason
C_02(2) TYPE C VALUE '02', " For Reversal Reason
c_blart TYPE bkpf-blart VALUE 'RE', " Document type
C_MTPOS TYPE MVKE-MTPOS VALUE 'BANS', " Item Category group
C_AUGRU(5) TYPE C VALUE 'AUGRU', " Reason Code
C_0000500205(10) TYPE C VALUE '0000500205', " GL Account #
C_VERKBELEG(9) TYPE C VALUE 'VERKBELEG'. " For Object Class
*-- Horizontal tab & line feed constants
CLASS CL_ABAP_CHAR_UTILITIES DEFINITION LOAD.
CONSTANTS:
C_TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB,
C_CR_LF TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>CR_LF .
* SELECTION SCREEN
*-- Select Optons
SELECTION-SCREEN: BEGIN OF BLOCK B01 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_AUART FOR VBAK-AUART OBLIGATORY NO INTERVALS,
" Sales Document Type
S_AUGRU FOR VBAK-AUGRU OBLIGATORY NO INTERVALS,
" Order reason
S_ERDAT FOR VBAK-ERDAT OBLIGATORY.
" Date on which the record was created
SELECTION-SCREEN: END OF BLOCK B01.
*-- Mail Sending Options
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
PARAMETERS:P_EMAIL AS CHECKBOX DEFAULT SPACE USER-COMMAND V_COM .
PARAMETERS : P_MODE TYPE SO_ESCAPE default 'U' MODIF ID US1.
SELECT-OPTIONS: S_EMAIL FOR ADR6-SMTP_ADDR
NO INTERVALS MODIF ID US2.
* SELECT-OPTIONS: S_EMAIL FOR TRDYSE01CM-USERNAME
* NO INTERVALS MODIF ID US2.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN: COMMENT 55(40) TEXT-019 MODIF ID US2.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
* WORK AREA for SELECT-OPTIONS
DATA : X_EMAIL LIKE S_EMAIL. "Work area for EMAIL select-options
* INITIALIZATION
INITIALIZATION.
*-- Default values for Sales Document Type
CLEAR S_AUART[].
S_AUART-SIGN = 'I'.
S_AUART-OPTION = 'EQ'.
S_AUART-LOW = 'CR'.
APPEND S_AUART.
CLEAR S_AUART.
*-- Default values for Date on which the record was created
V_DATE = ( SY-DATUM - 1 ).
CLEAR S_ERDAT[].
S_ERDAT-SIGN = 'I'.
S_ERDAT-OPTION = 'EQ'.
S_ERDAT-LOW = SY-DATUM.
S_ERDAT-HIGH = SY-DATUM.
APPEND S_ERDAT.
CLEAR S_ERDAT.
* TOP OF PAGE *
TOP-OF-PAGE.
*-- Displaying standard header.
PERFORM std_top_of_page USING sy-title.
* A T S E L E C T I O N S C R E E N O U T P U T
*-- For modifying the selection screen layout
AT SELECTION-SCREEN OUTPUT.
PERFORM F_MODIFY_SCREEN.
* AT SELECTION SCREEN. *
AT SELECTION-SCREEN.
*-- Subroutine to Validate selection screen fields
PERFORM f_validate.
* START-OF-SELECTION *
*START-OF-SELECTION.*
**-- Fetch the Credit Memo Requests documents*
*PERFORM F_GET_CREDIT_MEMO_REQUEST.*
*IF NOT IT_CRMEMO[] IS INITIAL.*
**-- Fetch Item Category Group*
*PERFORM F_GET_MVKE_DOCS.*
**-- Fetch Sales Order documents, PO Documents and Credit Memos*
*PERFORM F_GET_SO_PO_DOCS.*
*ENDIF.*
**-- If Credit memo request internal table have an change records then*
** fetch the change documents from CDHDR and CDPOS*
*IF NOT IT_CRMEMO_CHANGE[] IS INITIAL.*
**-- Fetch Change Documents for CR Memos from CDHDR and CDPOS tables*
*PERFORM F_GET_CHANGED_DOCS.*
*ENDIF.*
**-- Fetch Purchasing Document Item Details*
*IF NOT IT_PO[] IS INITIAL.*
*PERFORM F_GET_EKPO.*
*ENDIF.*
**-- Fetch MIRO Vendor based on the PO Details*
*IF NOT IT_EKPO[] IS INITIAL.*
*PERFORM F_GET_VENDOR.*
*ENDIF.*
* END-OF-SELECTION *
if v_flag is initial.
*-- Process Vendor Debit Postings
PERFORM F_PROCESS_MIRO.
*-- Process Reversal Postings of Vendor Automatic Debits using TCODE MR8M
PERFORM F_PROCESS_MR8M.
*-- Send mail,if user enters Email id's and Email Mode is not initial
IF P_EMAIL = C_X AND P_MODE IS NOT INITIAL AND S_EMAIL[] IS NOT INITIAL.
*-- Get spool id
perform f_spool_id.
*-- EMail Logic
PERFORM F_MAIL_LOGIC.
ENDIF.
*-- display the EMail RSCONN01 and Sussess and Error records of MIRO and MR8M
perform f_display_report.
else.
*-- Else exit the process
exit.
endif.
*& Form F_MODIFY_SCREEN
* A Form routine to modify the screen
FORM F_MODIFY_SCREEN .
*-- To Modify Mail Sending Options
LOOP AT SCREEN.
IF P_EMAIL = C_X.
IF SCREEN-GROUP1 = 'US1' .
SCREEN-INVISIBLE = 0.
SCREEN-ACTIVE = 1.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP2 = 'US2' .
SCREEN-INVISIBLE = 0.
SCREEN-ACTIVE = 1.
MODIFY SCREEN.
ENDIF.
ELSEIF P_EMAIL = SPACE.
IF SCREEN-GROUP1 = 'US1' .
SCREEN-INVISIBLE = 1.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'US2' .
SCREEN-INVISIBLE = 1.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " F_MODIFY_SCREEN
*& Form f_validate
* Validation of Selection-Screen Inputs
FORM f_validate .
*-- Validate Sales Document Type
if not s_AUART[] is initial.
select AUART
into s_AUART-low
from TVAK up to 1 rows
where AUART in s_AUART.
endselect.
if sy-subrc <> 0.
message E000 with 'Invalid Sales Document Type'(e01) .
endif.
ENDIF.
*-- Validate Order reason (reason for the business transaction)
if not s_AUGRU[] is initial.
select AUGRU
into s_AUGRU-low
from TVAU up to 1 rows
where AUGRU in s_AUGRU.
endselect.
if sy-subrc <> 0.
message E000 with 'Invalid Order reason'(e02) .
endif.
endif.
ENDFORM. " f_validate
*& Form F_GET_CREDIT_MEMO_REQUEST
* Fetch Credit memo requests from VBAK & VBAP
FORM F_GET_CREDIT_MEMO_REQUEST .
SELECT A~VBELN
B~POSNR
A~ERDAT
A~AUART
A~AUGRU
A~WAERK
A~VKORG
A~VTWEG
A~SPART
A~VDATU
A~BSTNK
A~BSARK
A~BSTDK
A~AEDAT
A~BUKRS_VF
B~MATNR
B~ZMENG
B~ZIEME
INTO TABLE IT_CRMEMO
FROM ( VBAK AS A
INNER JOIN VBAP AS B ON A~VBELN = B~VBELN )
WHERE ( A~ERDAT IN S_ERDAT
OR A~AEDAT IN S_ERDAT )
AND A~AUART IN S_AUART.
IF SY-SUBRC = 0.
SORT IT_CRMEMO BY VBELN POSNR.
ELSE.
MESSAGE I000 WITH 'No Credit Memo Request selected'(002).
v_flag = C_X.
stop.
ENDIF.
ENDFORM. " F_GET_CREDIT_MEMO_REQUEST
*& Form F_GET_MVKE_DOCS
* Fetch Sales Data for Material
FORM F_GET_MVKE_DOCS .
DATA: LV_TABIX TYPE SY-TABIX.
*-- Fetch Sales Data for Material
SELECT MATNR " Material Number
VKORG " Sales Organization
VTWEG " Distribution Channel
MTPOS " Item category group from material master
FROM MVKE " Sales Data for Material
INTO TABLE IT_MVKE
FOR ALL ENTRIES IN IT_CRMEMO
WHERE MATNR = IT_CRMEMO-MATNR
AND VKORG = IT_CRMEMO-VKORG
AND VTWEG = IT_CRMEMO-VTWEG.
IF SY-SUBRC = 0.
SORT IT_MVKE BY MATNR VKORG VTWEG MTPOS.
ENDIF.
*-- Validate Item category group if MVKE-MTOPS <> 'BANS' then ignore CM Request line item
LOOP AT IT_CRMEMO INTO WA_CRMEMO.
LV_TABIX = SY-TABIX.
READ TABLE IT_MVKE INTO WA_MVKE WITH KEY MATNR = WA_CRMEMO-MATNR
VKORG = WA_CRMEMO-VKORG
VTWEG = WA_CRMEMO-VTWEG
MTPOS = C_MTPOS
BINARY SEARCH.
IF SY-SUBRC <> 0.
DELETE IT_CRMEMO INDEX LV_TABIX. " Delete CR memo records
ELSE.
*-- Else check for credit memo request change date is not initial, and
* append those records to IT_CRMEMO_CHANGE internal table to retrive
* change documents
IF NOT WA_CRMEMO-AEDAT IS INITIAL.
WA_CRMEMO_CHANGE-VBELN = WA_CRMEMO-VBELN.
WA_CRMEMO_CHANGE-POSNR = WA_CRMEMO-POSNR.
WA_CRMEMO_CHANGE-ERDAT = WA_CRMEMO-ERDAT.
WA_CRMEMO_CHANGE-AUART = WA_CRMEMO-AUART.
WA_CRMEMO_CHANGE-AUGRU = WA_CRMEMO-AUGRU.
WA_CRMEMO_CHANGE-WAERK = WA_CRMEMO-WAERK.
WA_CRMEMO_CHANGE-VKORG = WA_CRMEMO-VKORG.
WA_CRMEMO_CHANGE-VTWEG = WA_CRMEMO-VTWEG.
WA_CRMEMO_CHANGE-SPART = WA_CRMEMO-SPART.
WA_CRMEMO_CHANGE-VDATU = WA_CRMEMO-VDATU.
WA_CRMEMO_CHANGE-BSTNK = WA_CRMEMO-BSTNK.
WA_CRMEMO_CHANGE-BSARK = WA_CRMEMO-BSARK.
WA_CRMEMO_CHANGE-BSTDK = WA_CRMEMO-BSTDK.
WA_CRMEMO_CHANGE-AEDAT = WA_CRMEMO-AEDAT.
WA_CRMEMO_CHANGE-BUKRS_VF = WA_CRMEMO-BUKRS_VF.
WA_CRMEMO_CHANGE-MATNR = WA_CRMEMO-MATNR.
WA_CRMEMO_CHANGE-ZMENG = WA_CRMEMO-ZMENG.
WA_CRMEMO_CHANGE-ZIEME = WA_CRMEMO-ZIEME.
APPEND WA_CRMEMO_CHANGE TO IT_CRMEMO_CHANGE.
CLEAR WA_CRMEMO_CHANGE.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " F_GET_MVKE_DOCS
*& Form F_GET_SO_PO_DOCS
* Fetch the Sales Order documents, PO documents, & Credit Memo
FORM F_GET_SO_PO_DOCS.
*-- Fetch Preceding sales orders based on the credit memo request
SELECT VBELV
POSNV
VBELN
POSNN
VBTYP_N
FROM VBFA
INTO TABLE IT_ORDERS
FOR ALL ENTRIES IN IT_CRMEMO
WHERE VBELN = IT_CRMEMO-VBELN
AND POSNN = IT_CRMEMO-POSNR
AND VBTYP_N = C_K
AND VBTYP_V = C_C.
IF SY-SUBRC = 0.
SORT IT_ORDERS BY VBELV POSNV.
*-- Fetch Subsequent PO documents & Credit Memo based on the sales orders
SELECT VBELV
POSNV
VBELN
POSNN
VBTYP_N
FROM VBFA
INTO TABLE IT_PO
FOR ALL ENTRIES IN IT_ORDERS
WHERE VBELV = IT_ORDERS-VBELV
AND POSNV = IT_ORDERS-POSNV
AND VBTYP_N IN (C_V,C_O)
AND VBTYP_V = C_C.
IF SY-SUBRC = 0.
SORT IT_PO BY VBTYP_N.
*-- Copy the IT_PO internal table contents to IT_CMEMO internal table
IT_CMEMO[] = IT_PO[].
*-- Delete PO documents from IT_CMEMO internal table
DELETE IT_CMEMO WHERE VBTYP_N = C_V.
SORT IT_CMEMO BY VBELN POSNN.
IF IT_CMEMO[] IS INITIAL.
MESSAGE I000 WITH 'No Credit Memo are available for CM Request'(003).
* v_flag = c_x.
* stop.
ENDIF.
*-- Delete Credit Memo documents from IT_PO internal table
DELETE IT_PO WHERE VBTYP_N = C_O.
SORT IT_PO BY VBELN POSNN.
ENDIF.
ENDIF.
ENDFORM. " F_GET_SO_PO_DOCS
*& Form F_GET_CHANGED_DOCS
* Fetch Change Documents for CR Memos from CDHDR and CDPOS tables
FORM F_GET_CHANGED_DOCS .
*-- Fetch Change Documents for CR Memos from CDHDR
SELECT OBJECTCLAS
OBJECTID
CHANGENR
UDATE
UTIME
FROM CDHDR
INTO TABLE IT_CDHDR
FOR ALL ENTRIES IN IT_CRMEMO_CHANGE
WHERE OBJECTCLAS = C_VERKBELEG
AND OBJECTID = IT_CRMEMO_CHANGE-VBELN
* AND UDATE = IT_CRMEMO_CHANGE-AEDAT
IF SY-SUBRC = 0.
SORT IT_CDHDR BY OBJECTCLAS OBJECTID CHANGENR.
*-- Fetch Change Documents for CR Memos from CDPOS
SELECT OBJECTCLAS
OBJECTID
CHANGENR
TABNAME
TABKEY
FNAME
CHNGIND
VALUE_NEW
VALUE_OLD
FROM CDPOS
INTO TABLE IT_CDPOS
FOR ALL ENTRIES IN IT_CDHDR
WHERE OBJECTCLAS = C_VERKBELEG
AND OBJECTID = IT_CDHDR-OBJECTID
AND CHANGENR = IT_CDHDR-CHANGENR
AND TABNAME = C_VBAK
AND FNAME = C_AUGRU
AND CHNGIND = C_U.
IF SY-SUBRC = 0.
SORT IT_CDPOS BY OBJECTCLAS OBJECTID CHANGENR.
ENDIF.
ENDIF.
ENDFORM. " F_GET_CHANGED_DOCS
*& Form F_GET_EKPO
* Fetch Purchasing Document Item Details
FORM F_GET_EKPO .
*-- Fetch Purchasing Document Item Details
SELECT A~EBELN
B~EBELP
A~WAERS
B~MENGE
B~MEINS
B~NETPR
B~PEINH
B~mwskz
B~TXJCD
INTO TABLE IT_EKPO
FROM ( EKKO AS A
INNER JOIN EKPO AS B ON A~EBELN = B~EBELN )
FOR ALL ENTRIES IN IT_PO
WHERE A~EBELN = IT_PO-VBELN
AND B~EBELP = IT_PO-POSNN+1(5).
IF SY-SUBRC = 0.
SORT IT_EKPO BY EBELN EBELP.
ENDIF.
ENDFORM. " F_GET_EKPO
*& Form F_GET_VENDOR
* Fetch MIRO Vendor details based on the PO Details
FORM F_GET_VENDOR .
DATA: LV_TABIX TYPE SY-TABIX.
*-- Fetch History per Purchasing Document records for all the PO records
SELECT EBELN
EBELP
ZEKKN
VGABE
GJAHR
BELNR
BUZEI
FROM EKBE
INTO TABLE IT_EKBE
FOR ALL ENTRIES IN IT_EKPO
WHERE EBELN = IT_EKPO-EBELN
AND EBELP = IT_EKPO-EBELP
AND VGABE = '2'.
* and STBLG = space.
IF SY-SUBRC = 0.
SORT IT_EKBE BY BELNR GJAHR.
*-- Fetch the vendor details based on table IT_EKBE internal table
SELECT BELNR
GJAHR
BLDAT
BUDAT
XBLNR
LIFNR
RMWWR
WMWST1
XRECH
STBLG
FROM RBKP
INTO TABLE IT_RBKP
FOR ALL ENTRIES IN IT_EKBE
WHERE BELNR = IT_EKBE-BELNR
AND GJAHR = IT_EKBE-GJAHR.
IF SY-SUBRC = 0.
SORT IT_RBKP BY BELNR GJAHR.
ENDIF.
ENDIF.
*-- Sort PO History documents based on PO # and PO Item
SORT IT_EKBE BY EBELN EBELP.
*-- Copy the PO History documents into IT_EKBE_TEMP internal table
IT_EKBE_TEMP[] = IT_EKBE[].
*-- Delete PO History documents from IT_EKBE_TEMP internal table
* comparing with IT_RBKP where (STBLG) Reversal document number
* is initial
LOOP AT IT_EKBE_TEMP INTO WA_EKBE_TEMP.
LV_TABIX = SY-TABIX.
READ TABLE IT_RBKP INTO WA_RBKP WITH KEY BELNR = WA_EKBE_TEMP-BELNR
GJAHR = WA_EKBE_TEMP-GJAHR
* XRECH = SPACE
STBLG = SPACE.
IF SY-SUBRC <> 0.
DELETE IT_EKBE_TEMP INDEX LV_TABIX.
ENDIF.
CLEAR: WA_EKBE_TEMP, WA_RBKP.
ENDLOOP.
ENDFORM. " F_GET_VENDOR
*& Form F_PROCESS_MIRO
* Process MIRO
FORM F_PROCESS_MIRO .
DATA:
lv_itemno TYPE i,
lv_tabix type sy-index,
lc_check(1) TYPE c VALUE 'X',
V_FILL_ITEM,
lv_rbkp_bldat type sy-datum.
clear : it_itemdata, it_accountingdata, IT_CRMEMO_MIRO, IT_CRMEMO_MR8M.
refresh : it_itemdata, it_accountingdata, IT_CRMEMO_MIRO, IT_CRMEMO_MR8M.
*-- Copy all the CR Memo Docs and delete order reason not in S_AUGRU
IT_CRMEMO_MR8M[] = IT_CRMEMO[].
*-- Delete Reversal postings which are not in S_AUGRU
DELETE IT_CRMEMO_MR8M WHERE AUGRU IN S_AUGRU.
*-- Delete Reversal postings where AEDAT is initial
DELETE IT_CRMEMO_MR8M where aedat is initial.
*-- Delete order reason which are not in S_AUGRU
DELETE IT_CRMEMO WHERE AUGRU NOT IN S_AUGRU.
*-- Loop through the credit memo request records
LOOP AT IT_CRMEMO INTO WA_CRMEMO.
lv_tabix = sy-tabix.
*-- If credit memo request change date is not initial then
* send change date (AEDAT) to lv_rbkp_bldat
if not WA_CRMEMO-aedat is initial.
lv_rbkp_bldat = WA_CRMEMO-aedat.
else.
*-- If credit memo request change date is initial then
* send create date (ERDAT) to lv_rbkp_bldat
lv_rbkp_bldat = WA_CRMEMO-erdat.
endif.
READ TABLE IT_ORDERS INTO WA_ORDERS WITH KEY VBELN = WA_CRMEMO-VBELN
POSNN = WA_CRMEMO-POSNR.
IF SY-SUBRC = 0.
READ TABLE IT_PO INTO WA_PO WITH KEY VBELV = WA_ORDERS-VBELV
POSNV = WA_ORDERS-POSNV.
IF SY-SUBRC = 0.
READ TABLE IT_EKPO INTO WA_EKPO WITH KEY EBELN = WA_PO-VBELN
EBELP = WA_PO-POSNN.
IF SY-SUBRC = 0.
*-- Read IT_EKBE_TEMP internal table which contains records which are not reversed
READ TABLE IT_EKBE_TEMP INTO WA_EKBE_TEMP WITH KEY EBELN = WA_EKPO-EBELN
EBELP = WA_EKPO-EBELP.
IF SY-SUBRC = 0.
*-- Read IT_RBKP internal table with XRECH (Indicator: post invoice) = 'X' ,
* check for invoice records for the correspnding CR Memo records
READ TABLE IT_RBKP INTO WA_RBKP WITH KEY BELNR = WA_EKBE_TEMP-BELNR
GJAHR = WA_EKBE_TEMP-GJAHR
XRECH = C_X.
IF SY-SUBRC = 0.
*-- Read IT_RBKP internal table with XRECH (Indicator: post invoice) = SPACE,
* and document date = CR Memo creation date
* and reference document number = PO number
READ TABLE IT_RBKP INTO WA_RBKP_TMP WITH KEY BELNR = WA_EKBE_TEMP-BELNR
GJAHR = WA_EKBE_TEMP-GJAHR
BLDAT = WA_CRMEMO-ERDAT
XRECH = ' '
XBLNR+0(10) = WA_EKBE_TEMP-ebeln.
* STBLG = SPACE.
IF SY-SUBRC = 0.
CONTINUE.
ELSE.
*-- Quantity Conversion (Get the Credit Memo Quantity by passing CMR unit per one PO unit)
perform f_quantity_conv.
*-- Filling the Line items data
*-- Incrementing the item no
lv_itemno = lv_itemno + 1.
v_itemno = lv_itemno.
it_itemdata-invoice_doc_item = v_itemno.
it_itemdata-po_number = WA_ekPO-ebeln.
it_itemdata-po_item = WA_EKPO-EBELP.
it_itemdata-tax_code = WA_ekpo-mwskz.
it_itemdata-TAXJURCODE = WA_ekpo-TXJCD.
*-- Converting SAP amount to BAPI format by passing line item amount and currency
PERFORM f_currency_amount_sap_to_bapi USING WA_EKPO-waers
V_LINE_AMOUNT
CHANGING it_itemdata-item_amount .
it_itemdata-quantity = ( WA_CRMEMO-ZMENG * V_CRMEMO_QTY ).
it_itemdata-po_unit = WA_EKPO-MEINS.
APPEND it_itemdata.
*-- Populate Account Assignment data
IT_ACCOUNTINGDATA-INVOICE_DOC_ITEM = v_itemno.
IT_ACCOUNTINGDATA-XUNPL = space.
IT_ACCOUNTINGDATA-SERIAL_NO = C_01.
IT_ACCOUNTINGDATA-TAX_CODE = it_itemdata-tax_code.
IT_ACCOUNTINGDATA-TAXJURCODE = it_itemdata-TAXJURCODE.
IT_ACCOUNTINGDATA-ITEM_AMOUNT = it_itemdata-item_amount.
IT_ACCOUNTINGDATA-QUANTITY = it_itemdata-quantity.
IT_ACCOUNTINGDATA-PO_UNIT = it_itemdata-po_unit.
IT_ACCOUNTINGDATA-GL_ACCOUNT = C_0000500205.
append IT_ACCOUNTINGDATA.
clear IT_ACCOUNTINGDATA.
CLEAR it_itemdata.
endif.
endif.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
*-- At end of each credit memo request fill the header details of BAPI FM and
*-- post the BAPI
AT END OF VBELN.
read table it_crmemo into wa_crmemo index lv_tabix.
*-- Populate the document Header
*-- Getting the header data for invoice
x_docheader-invoice_ind = space.
x_docheader-doc_type = c_blart.
x_docheader-doc_date = lv_rbkp_bldat.
x_docheader-pstng_date = lv_rbkp_bldat.
x_docheader-ref_doc_no = WA_RBKP-XBLNR.
x_docheader-comp_code = WA_CRMEMO-BUKRS_VF.
x_docheader-CURRENCY = WA_CRMEMO-WAERK.
x_docheader-calc_tax_ind = lc_check.
*-- Logic to find the Tax %
v_tax_per = ( WA_RBKP-WMWST1 / ( WA_RBKP-RMWWR - WA_RBKP-WMWST1 ) ) * 100.
v_tax_amt = ( V_GROSSAMT * v_tax_per ) / 100.
V_GROSSAMT = ( V_GROSSAMT + v_tax_amt ).
x_docheader-gross_amount = V_GROSSAMT.
CLEAR:v_docnr, v_year1.
*-- Calling BAPI to create PO invoice document
CHECK NOT IT_ITEMDATA[] IS INITIAL.
CALL FUNCTION 'BAPI_INCOMINGINVOICE_CREATE'
EXPORTING
headerdata = x_docheader
IMPORTING
invoicedocnumber = v_docnr
fiscalyear = v_year1
TABLES
itemdata = it_itemdata[]
ACCOUNTingDATA = it_ACCOUNTingDATA[]
* GLACCOUNTDATA =
* taxdata =
return = it_return.
*-- Commit work
IF NOT v_docnr IS INITIAL.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
*-- Move the data to Success Internal Table
wa_success-crmemo = wa_crmemo-vbeln.
wa_success-cmemo = wa_cmemo-vbeln.
wa_success-orders = wa_orders-vbelv.
wa_success-po = wa_po-vbeln.
wa_success-miro_no = v_docnr.
wa_success-text = 'MIRO is Posted'.
append wa_success TO it_success.
clear wa_success.
ENDIF.
*-- Read the values in the table IT_RETURN.
CLEAR it_return.
READ TABLE it_return INDEX 1.
* If message type is error then roll back the work
IF it_return-type = C_E.
*-- Roll back
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
*-- Move the data to Error Internal Table
wa_error-crmemo = wa_crmemo-vbeln.
wa_error-cmemo = wa_cmemo-vbeln.
wa_error-orders = wa_orders-vbelv.
wa_error-po = wa_po-vbeln.
wa_error-text = it_return-MESSAGE.
append wa_error TO it_error.
clear wa_error.
ENDIF.
refresh: it_return, it_itemdata, it_accountingdata.
clear: V_GROSSAMT, it_return, it_itemdata, wa_crmemo, wa_orders, wa_po,
wa_ekpo, WA_EKBE_TEMP, wa_rbkp, wa_rbkp_tmp, v_docnr, v_year1, WA_SUCCESS,
WA_ERROR, it_accountingdata, v_tax_per, v_tax_amt, V_FILL_ITEM, lv_rbkp_bldat.
ENDAT.
ENDLOOP.
ENDFORM. " F_PROCESS_MIRO
*& Form f_quantity_conv
* Quantity Conversion
FORM f_quantity_conv .
*-- Quantity Conversion (Get the Credit Memo Quantity by passing CMR unit per one PO unit)
CLEAR: V_LINE_AMOUNT, V_CRMEMO_QTY.
call function 'MC_UNIT_CONVERSION'
EXPORTING
MATNR = WA_CRMEMO-MATNR
nach_meins = WA_EKPO-MEINS
von_meins = WA_CRMEMO-ZIEME
IMPORTING
UMREF = V_CRMEMO_QTY
EXCEPTIONS
CONVERSION_NOT_FOUND = 1
MATERIAL_NOT_FOUND = 2
NACH_MEINS_MISSING = 3
OVERFLOW = 4
VON_MEINS_MISSING = 5
OTHERS = 6.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
V_LINE_AMOUNT = ( V_CRMEMO_QTY * WA_CRMEMO-ZMENG * WA_EKPO-peinh * WA_EKPO-NETPR ).
V_GROSSAMT = V_GROSSAMT + V_LINE_AMOUNT.
ENDIF.
ENDFORM. " f_quantity_conv
*& Form f_currency_amount_sap_to_bapi
* SAP Amount to BAPI Amount
FORM f_currency_amount_sap_to_bapi USING p_waers
p_kbetr
CHANGING p_amt_doccur.
DATA : lv_waers LIKE tcurc-waers,
lv_sapamount LIKE bapicurr-bapicurr,
lv_bapi_amount LIKE bapicurr-bapicurr.
lv_waers = p_waers.
lv_sapamount = p_kbetr.
CALL FUNCTION 'CURRENCY_AMOUNT_SAP_TO_BAPI'
EXPORTING
currency = lv_waers
sap_amount = lv_sapamount
IMPORTING
bapi_amount = lv_bapi_amount.
p_amt_doccur = lv_bapi_amount.
ENDFORM. " f_currency_amount_sap_to_bapi
*& Form f_display_report
* Display Report
FORM f_display_report .
*-- Success Report
IF NOT IT_SUCCESS[] IS INITIAL.
ULINE AT /1(129).
WRITE:/1 sy-vline, 'CR Memo',
19 sy-vline, 'Credit Memo',
39 sy-vline, 'Sales Order',
59 sy-vline, 'Purchase Order',
79 sy-vline, 'MIRO Number',
99 sy-vline, 'Text',
129 sy-vline.
ULINE AT /1(129).
LOOP AT it_success into wa_success.
WRITE:/1 sy-vline, wa_success-crmemo,
19 sy-vline, wa_success-cmemo,
39 sy-vline, wa_success-orders,
59 sy-vline, wa_success-po,
79 sy-vline, wa_success-miro_no,
99 sy-vline, wa_success-text,
129 sy-vline.
ENDLOOP.
ULINE AT /1(129).
SKIP 2.
ENDIF.
*-- Error Report
IF NOT IT_ERROR[] IS INITIAL.
ULINE AT /1(179).
WRITE:/1 sy-vline, 'CR Memo',
19 sy-vline, 'Credit Memo',
39 sy-vline, 'Sales Order',
59 sy-vline, 'Purchase Order',
79 sy-vline, 'Error Text',
179 sy-vline.
ULINE AT /1(179).
LOOP AT IT_ERROR into WA_ERROR.
WRITE:/1 sy-vline, WA_ERROR-crmemo,
19 sy-vline, WA_ERROR-cmemo,
39 sy-vline, WA_ERROR-orders,
59 sy-vline, WA_ERROR-po,
79 sy-vline, WA_ERROR-text,
179 sy-vline.
ENDLOOP.
ULINE AT /1(179).
ENDIF.
IF NOT IT_SUCCESS_MR8M[] IS INITIAL.
ULINE AT /1(129).
WRITE:/1 sy-vline, 'CR Memo',
19 sy-vline, 'Credit Memo',
39 sy-vline, 'Sales Order',
59 sy-vline, 'Purchase Order',
79 sy-vline, 'Reversal Posting No.',
99 sy-vline, 'Text',
129 sy-vline.
ULINE AT /1(129).
LOOP AT it_success_mr8m into wa_success_mr8m.
WRITE:/1 sy-vline, wa_success_mr8m-crmemo,
19 sy-vline, wa_success_mr8m-cmemo,
39 sy-vline, wa_success_mr8m-orders,
59 sy-vline, wa_success_mr8m-po,
79 sy-vline, wa_success_mr8m-miro_no,
99 sy-vline, wa_success_mr8m-text,
129 sy-vline.
ENDLOOP.
ULINE AT /1(129).
SKIP 2.
ENDIF.
*-- Error Report
IF NOT IT_ERROR_MR8M[] IS INITIAL.
ULINE AT /1(179).
WRITE:/1 sy-vline, 'CR Memo',
19 sy-vline, 'Credit Memo',
39 sy-vline, 'Sales Order',
59 sy-vline, 'Purchase Order',
79 sy-vline, 'Error Text',
179 sy-vline.
ULINE AT /1(179).
LOOP AT IT_ERROR_MR8M into WA_ERROR_MR8M.
WRITE:/1 sy-vline, WA_ERROR_MR8M-crmemo,
19 sy-vline, WA_ERROR_MR8M-cmemo,
39 sy-vline, WA_ERROR_MR8M-orders,
59 sy-vline, WA_ERROR_MR8M-po,
79 sy-vline, WA_ERROR_MR8M-text,
179 sy-vline.
ENDLOOP.
ULINE AT /1(179).
ENDIF.
ENDFORM. " f_display_report
*& Form F_PROCESS_MR8M
* Process Reversal postings
FORM F_PROCESS_MR8M .
clear: wa_CRMEMO_MR8M.
LOOP AT IT_CRMEMO_MR8M into WA_CRMEMO_MR8M.
read table it_cdpos into wa_cdpos with key OBJECTID = WA_CRMEMO_MR8M-VBELN.
if sy-subrc <> 0.
CONTINUE.
ELSE.
if wa_cdpos-value_old in s_augru.
READ TABLE IT_ORDERS INTO WA_ORDERS WITH KEY VBELN = wa_CRMEMO_MR8M-VBELN
POSNN = wa_CRMEMO_MR8M-POSNR.
IF SY-SUBRC = 0.
* READ TABLE IT_CMEMO INTO WA_CMEMO WITH KEY VBELV = WA_ORDERS-VBELV
* POSNV = WA_ORDERS-POSNV.
* IF SY-SUBRC = 0.
READ TABLE IT_PO INTO WA_PO WITH KEY VBELV = WA_ORDERS-VBELV
POSNV = WA_ORDERS-POSNV.
IF SY-SUBRC = 0.
READ TABLE IT_EKPO INTO WA_EKPO WITH KEY EBELN = WA_PO-VBELN
EBELP = WA_PO-POSNN.
IF SY-SUBRC = 0.
* READ TABLE IT_EKBE INTO WA_EKBE WITH KEY EBELN = WA_EKPO-EBELN
* EBELP = WA_EKPO-EBELP.
* IF SY-SUBRC = 0.
LOOP AT IT_EKBE into WA_EKBE WHERE EBELN = WA_EKPO-EBELN
AND EBELP = WA_EKPO-EBELP.
READ TABLE IT_RBKP INTO WA_RBKP WITH KEY BELNR = WA_EKBE-BELNR
GJAHR = WA_EKBE-GJAHR
* BLDAT = WA_CRMEMO_MR8M-AEDAT
XBLNR+0(10) = WA_EKBE-EBELN
XRECH = SPACE
STBLG = SPACE.
IF SY-SUBRC = 0.
move: WA_RBKP-BELNR TO X_REV_POST-INV_DOC_NO,
WA_RBKP-GJAHR TO X_REV_POST-FISC_YEAR,
WA_RBKP-BUDAT TO X_REV_POST-PSTNG_DATE.
IF WA_RBKP-BUDAT+4(2) = SY-DATUM+4(2).
X_REV_POST-REASON_REV = C_01.
ELSE.
X_REV_POST-REASON_REV = C_02.
ENDIF.
ENDIF.
ENDLOOP.
*-- Call the FM for MIRO reversal
CALL FUNCTION 'BAPI_INCOMINGINVOICE_CANCEL'
EXPORTING
INVOICEDOCNUMBER = X_REV_POST-INV_DOC_NO
FISCALYEAR = X_REV_POST-FISC_YEAR
REASONREVERSAL = X_REV_POST-REASON_REV
POSTINGDATE = X_REV_POST-PSTNG_DATE
IMPORTING
INVOICEDOCNUMBER_REVERSAL = X_REV_POST-INV_DOC_NO
FISCALYEAR_REVERSAL = X_REV_POST-FISC_YEAR
TABLES
RETURN = it_return_mr8m.
*-- Commit work
IF NOT X_REV_POST-INV_DOC_NO IS INITIAL.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
*-- Move the data to Success Internal Table
wa_success_mr8m-crmemo = wa_crmemo-vbeln.
wa_success_mr8m-cmemo = wa_cmemo-vbeln.
wa_success_mr8m-orders = wa_orders-vbelv.
wa_success_mr8m-po = wa_po-vbeln.
wa_success_mr8m-text = 'MR8M Done'.
append wa_success_mr8m TO it_success_mr8m.
clear wa_success_mr8m.
ENDIF.
*-- Read the values in the table IT_RETURN.
CLEAR it_return_mr8m.
READ TABLE it_return_mr8m INDEX 1.
*-- If message type is error then roll back the work
IF it_return_mr8m-type = 'E' .
*-- Roll back
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
*-- Move the data to Error Internal Table
wa_error_mr8m-crmemo = wa_crmemo-vbeln.
wa_error_mr8m-cmemo = wa_cmemo-vbeln.
wa_error_mr8m-orders = wa_orders-vbelv.
wa_error_mr8m-po = wa_po-vbeln.
wa_error_mr8m-text = it_return_mr8m-MESSAGE.
append wa_error_mr8m TO it_error_mr8m.
clear wa_error_mr8m.
ENDIF.
* ENDIF.
* ENDIF.
ENDIF.
ENDIF.
* ENDIF.
ENDIF.
ENDIF.
ENDIF.
CLEAR: wa_error_mr8m, wa_SUCCESS_mr8m, X_REV_POST, wa_CRMEMO_MR8M,
wa_orders, wa_po, wa_ekpo, wa_ekbe, wa_rbkp, wa_cmemo.
REFRESH: IT_RETURN_MR8M.
endloop.
ENDFORM. " F_PROCESS_MR8M
*& Form F_spool_id
* Create a new spool ID
FORM F_spool_id .
*-- Create a new spool from the data in data_tab
*-- new-page line-size sy-linsz print on
new-page line-size 255 print on
destination 'LOCL'(p19) "<<== my printer
*-- receiver 'TJOSVOB'
cover text 'Spool title'(p20) " <<== Title or Spool req. name
list name 'List name'(p21)
list dataset 'List Dataset'(p22)
immediately ' ' " X means print now
keep in spool c_x " X means keep spool
new list identification c_x
no dialog .
*-- Writing Report
*-- In this perform you will write the code for displaying the list
perform f_display_report.
*-- new-page print off
new-page print off.
ENDFORM. " F_spool_id
*& Form F_MAIL_LOGIC
* Logic to send a mail for the given Email ID's
FORM F_MAIL_LOGIC .
data : wa_tsp01sys type tsp01sys.
clear v_spono.
v_spono = sy-spono.
* v_attach_desc = sy-title.
*-- Convert the Spool ID into PDF format
perform f_pdf_conversion tables it_compressed_list
it_pdf_list
using v_spono.
*-- Send the Mail in PDF Format
perform f_send_mail.
ENDFORM. " F_MAIL_LOGIC
*& Form f_pdf_conversion
* Read the spool and convert into PDF format
* -->P_ITAB_COMPRESSED_LIST text
* -->P_ITAB_PDF_LIST text
* -->P_V_SPONO text
FORM f_pdf_conversion TABLES it_compressed_list structure soli
it_pdf_list structure tline
using lv_spooln type tsp01-rqident.
clear: it_compressed_list, it_pdf_list.
refresh: it_compressed_list, it_pdf_list.
*-- Call the FM "RSPO_RETURN_SPOOLJOB" to read the spool by passing the spool number
call function 'RSPO_RETURN_SPOOLJOB'
exporting
rqident = lv_spooln
desired_type = v_type
importing
real_type = v_type
tables
buffer = it_compressed_list
buffer_pdf = it_pdf_list
exceptions
no_such_job = 1
job_contains_no_data = 2
selection_empty = 3
no_permission = 4
can_not_access = 5
read_error = 6
type_no_match = 7
others = 8.
if sy-subrc <> 0.
message I000 with 'Error in spool reading'(017).
endif.
*-- If the List type is ALI call the FM "CONVERT_ABAPSPOOLJOB_2_PDF"
* to convert list into PDF Format
if v_type = c_ali. " for List it is ALI
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
exporting
src_spoolid = lv_spooln
tables
pdf = it_pdf
exceptions
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
others = 12.
if sy-subrc <> 0.
message e000
with'Error in convertion of list into PDF format'(018).
endif.
*-- Logic to convert the given format into 255 character format in IT_PDF
describe table it_pdf lines v_lines.
describe field it_pdf length v_lineslen IN character MODE.
describe field it_temp length v_mimelen IN character MODE.
LOOP AT it_pdf.
v_tabix = sy-tabix.
MOVE it_pdf TO v_temp+v_offset.
IF v_tabix = v_lines.
v_lineslen = strlen( it_pdf ).
ENDIF.
v_offset = v_offset + v_lineslen.
IF v_offset GE v_mimelen.
CLEAR it_temp.
it_temp = v_temp(v_mimelen).
APPEND it_temp.
SHIFT v_temp BY v_mimelen PLACES.
v_offset = v_offset - v_mimelen.
ENDIF.
IF v_tabix = v_lines.
IF v_offset GT 0.
CLEAR it_temp.
it_temp = v_temp(v_offset).
APPEND it_temp.
ENDIF.
ENDIF.
ENDLOOP.
LOOP AT it_temp.
it_mime(255) = it_temp-line.
APPEND it_mime.
ENDLOOP.
*-- Final Data to send to EMail
it_html[] = it_mime[].
endif.
ENDFORM. " f_pdf_conversion
*& Form f_send_mail
* Send EMail Logic
FORM f_send_mail .
data : wa_tsp01sys type tsp01sys.
*-- Populate Mail Id's
WA_RECLIST-REC_TYPE = P_MODE.
WA_RECLIST-EXPRESS = C_X.
*-- Loop through the Emial select options
LOOP AT S_EMAIL INTO X_EMAIL.
WA_RECLIST-RECEIVER = X_EMAIL-LOW.
*-- append receiver table
APPEND WA_RECLIST TO IT_RECLIST.
ENDLOOP.
*-- If receiver table is not initial
CHECK IT_RECLIST[] IS NOT INITIAL.
*--To check Mail ID's internal table should not be Empty.
*--populate document attributes
*-- Mail subject line
CLEAR: X_DOC_CHNG.
X_DOC_CHNG-OBJ_NAME = 'HEADING'.
CONCATENATE 'Automatic Vendor Dedit Postings'(005)
SY-DATUM
INTO X_DOC_CHNG-OBJ_DESCR SEPARATED BY SPACE.
*-- Mail body
CONCATENATE 'Automatic Vendor Dedit Postings'(005)
' is attached.'(006)
INTO WA_OBJTXT SEPARATED BY SPACE.
APPEND WA_OBJTXT TO IT_OBJTXT.
*-- Append Date and Time into Body of em -
Error message AA119 while creating asset master through AS01
Hi
while creating asset master (AS01), i am getting following error:-
Depreciation key M003 not allowed (Check your entry)
Message no. AA119
Diagnosis
Depreciation key M003 is not defined.
System Response
Processing is terminated.
Procedure
You have the following choices:
Use a defined depreciation key (use input help).
Define a depreciation key in Customizing ("change" pushbutton) and activate the key.
I have done following in configuration:-
1) No change in base method
2) copied multi level method from standard key "011" to "M03" and maintain vlaue as - Acquisiton year - 9999, Years - 999, Validity period in month - 12, Base value key as - 01and depreciation % as 10
3) No change in Period Control Methods
4) Copied standard depreciation key "GL20" as "M003" and maintain the multilevel method as "M03"
5) save the configuration
6) Activate the depreciation key by selecting depreciation key and clicking on Activate button on top of the screen
7) Import the configuration
now while creating asset, depreciation key M003 is appearing in drop down list but getting above error. but if I tried with depreciation key GL20 (which is standard depreciation key) system accepting the input
In target client, depreciation key display in Active stage.
please revert if anybody has any clue to come out from above problem.
Regards
DDDear All Foram members
Thanks for your response.
I got the solution and now problem has been resolve.
Initially i have maintain Scrap Value as Default Value from Company code and Depreciation Area in Depreciation Key (AFAMA) and I was getting the error. But now I have change the Scrap Value as CutOff Value is ignore and problem gets resolve.
But still do not understand the relation between the erro and Scrap Value assignment. Any Idia. It will be helpful for other members also.
Thanks Pankaj, Madhu and Paul...........
Regards
DD -
IDOC type for Article Master : IS Retail
Hi all,
I am new to ALE/ IDOC and working in a scenario to create article master in SAP from third party application. The client is using IS Retail system with ECC 6.0. Can you please suggest what IDOC type to be used. The IDOC will be sent to SAP system from the third-party application. The IDOC can then be processed to create article master. Is ARTMAS the right message type for it? Somebody also suggested using message type WP_PLU. Can someone please let me know what is the difference between them?
Thanks,
SonikaHello Sonika,
WE_PLU is generally used along with the POS interface.
Please check this for more details
http://help.sap.com/saphelp_470/helpdata/en/ed/df673c86d19b35e10000000a11402f/frameset.htm
Article Master Uploading in IS- Retail system
This is basically your call depending on what data the message type is intended to carry and the use. ARTMAS should be the choice in your case.
Regards,
Nimish -
Article hierarchy in article master
Hi
While creating article master, in basic data view system populates a article hierarchy by default and its not editable. let me knowthe configuration setting bejind this
regards
SatyaprasadHello,
Perhaps the following Article Hierarchy Data transactions can help...
WMATGRP01 - Create
WMATGRP02 - Change
WMATGRP03 - Display
WMATGRP04 - Delete
WMATGRP05 - Activate
WMATGRP06 - Copy
WMATGRP07 - Deactivate
WMATGRP08 - Simulate
WMATGRP10 - Reorganize
WMATGRP11 - Export
Regards
Olivia -
ALE IDoc : Vendor Master : Cremas: Inbound IDocs are bypassing the Customiz
Hi,
Create Vendor master inbound IDocs - CREMAS - are overridding the customizing settings.
For example for a particular vendor group a number range is set in customizing.
When we try to create a vendor through XK01 which does not fall in a particular number range as set in customising for a particular vendor group, we get a error message and creation is terminated.
But if the same vendor is created via standard idoc CREMAS, vendor is created without any errors bypassing the customizing settings.
So can anybody help me in this. Is there any customising setting that we need to do explicitly for Vendor IDocs. Or any other setting in standard IDoc.
Thanks in advance.Hi,
1. If your vendor changes should be updated from one system to other system through ALE, we need to active the change pointers.
2. Change points can be activate through Tcode SALE
3. After activating change points and your distribution model is ready, you can execute the program RBDMIDOC to genarate the IDOCs.
4. Normally this program will be executed in the background
5. And as you said, you have to do some validations before sending IDOCs. For this you can Filters and rules in the DM.
OR you can write the code in user-exists of outbound posting program.
Rewards if this info is useful.
Thanks, -
Problem in creating Purchase order through Idoc
Hi ABAPers,
I am trying to post PO document through WE19 t-code using inbound function module BAPI_IDOC_INPUT1 which is calling BAPI_PO_CREATE1 internally.And i am getting below error messages.
1. Characteristic does not exist in operating concern AC01
2. This function only possible for subcontracting items
3. No instance of object type PurchaseOrder has been created. External reference
passing data to IDOC:PORDCR102
Header Segment : E1BPMEPOHEADER and E1BPMEPOHEADERX
company code 0814
doc_type NB
vendor 0000400001
poprg- EPRO
pgroup U01
Item Segment : E1BPMEPOITEM and E1BPMEPOITEMX
Item 00010
material 000000000000000263
plant 0374
Qty 22.000
Delivery Segment E1BPMEPOSCHEDULE and E1BPMEPOSCHEDULEX
Item 00010
Schedule line 0001
delivery date 01.12.2008
Qty 22.000
Note: i am able to create PO successfully, through SE37 by using FM BAPI_PO_CREATE1 with given above data.
Please confirm me, what else i need to pass to post PO through WE19 t-code using inbound function module BAPI_IDOC_INPUT1.
Please reply me ASAP.
Thanks and Regards,
Sekhar Raju.must be data format issue. when you use Function_module/BAPI from SAP GUI, convertion exit is applied automatically. hence data is converted to proper format & submited.
-
Populating deliv.add on po line item through inbound idoc
I could not populate delivery address on to po line item in backgroun i.e., through inbound idoc. please help , its a bit urgent.
Hi.
I have one PO 4500000001 for which I have created the inbound delivery 180000001. This inbound delivery has been created through an IDOC. I have another PO 4500000002 having one line item. Now i want to add another line item into the inbound delivery 180000001 for the PO 4500000002 as second line item. To add a second line item to the existing inbound delivery, which IDOC type should I use.
Hope it clarifies the requriement.
Thanks & Regards
Satya -
How the SAC amounts are posted to G/L accounts through Inbound Invoic Idocs
Hi EDI/ABAP experts,
Can anyone please tell me wow the SAC amounts are posted to G/L accounts through Inbound Invoic Idocs??
Can anyone point me to the code that permits INVOIC02 IDocs to post the SAC (service allowances and Charge) amount to particular G/L account??
What is the logic??
Thanks,
Creasy
Edited by: Creasy Matthew on Apr 27, 2009 10:41 PMHi Sunil,
When ever you prepare a billing document it creates an entry in General Ledger as Trial Balance has to be generated for the company all the expenses for a company should be recorded in GL. So that a company can see view their profit/loss figures.
As Billing is a sales related transaction it creates an GL Entry where in
Debits --> Customer Account
Credit --> Sales Revenue Account
And when the Customer Makes a payment with reference to the bill
One more GL Entry will be created i.e
Debit --> Bank Account
Credit --> Customer Account
With this we can track the customer balance (What ever balance is there in Customer account is customer Balance)
I think this is very clear with respect to the question you had asked.
Reward points if it helps.
Regards,
Sreekanth -
Creating Material Master IDoc when creating a Material
Hi Guys,
My requirement is to trigger an IDOC at the time when I am creating a material using MM01 transaction. The Changepointer is active and when i am tring to send materials using BD10 it's showing that the IDOC is created which certifies that the config is OK. but when I am creating a material and saving it ..the same process is not triggering an Idoc.
Can anyone help me out ...where I am missing out.
Thanks
Debasis Roy ChowdhuryHi Debasis,
Activating pointers for the message type do not trigger Idoc, we need to manually or scheduled the program to create the idoc against pointers.You need to run BD21 transaction or schedule RBDMIDOC .
Go through this [Idoc Triggers|Automatic Trigger of Idoc Sending to PI on Material Master Create/Change;.There is a good discussions.
Regards,
Madhu.
Edited by: madhurao123 on Feb 2, 2012 9:40 PM
Edited by: madhurao123 on Feb 2, 2012 9:43 PM -
IDOCS: How to Create Address Master to tranfer TPSLOC01 Idoc
Hi Gurus,
We are tranferring Location Masters like Customer, Vendor, Plant through TPSLOC01 IDOCs from SAP ECC 6.0 to Third party Trnasport Management System.
How to create Address Master Data (TRMTYP-AD) separately like Customer Master (TRMTYP-CU, Vendor Master (TRMTYP-SU) so that we can tranfer the Address Master Data through TPSLOC01 IDOC.
Thanks&Regards
SreekanthHi All,
This is closed as we have transferred only General data of the customer.
Thanks for all.
Sreekanth -
Hello,
I am getting this Error message"error determining posting period(infostructure S008,Variant Z2,RC3)" while creating Sales order from Inbound Idocs in the IDOC,which is affecting sales order creation.
While viewing this Info structure S008, I could see no records have been maintained. Wanted to know the reasons behind this Hard error?
Is it something related to Date Field used in the Update Rules for this Infostructure which is causing this posting period error?
Appreciate your inputs on this.
Thanks and Regards
Mohammed RoshanThank you Jelena,I checked the Ship. Delivery dates in the IDOC which are for Current Fiscal Year- 20140703 and 20140711,Could there be any other reason for this error?
Could it be an issue with e Update rule in this Infostructire S008
Secondly when we try change the update rule thru MC25 for this Infostructure S008,It gives a message"
"Maintenance of SAP standard updates not allowed"
Kindly advice
Thanks and Regards
Mohammed Roshan -
Transfer article master from SAP R/3 To External Systems(Futura) Using IDOC
Dear Experts
Please let me know how to Transfer article master from SAP R/3 To External Systems(Futura) or text file Using IDOCs.
thanksHello,
Since you want to transfer Article Master, it should be a Retail System. So you should use Message Type ARTMAS. For fullbuild, you can use transaction WDBM and for changes, you can use WDBU. For changes, you can enable change pointers for required fields using BD64.
Thanks,
Venu -
File to IDOC scenario: Create customer master and then return customer no
Hi all.
I have a scenario to pass xml file to sap XI to generate IDOC to create customer master in SAP. My problem is that I need to return customer no. created in SAP from IDOC. Is there any solution to do this? Someone told me that BPM could be used for doing this but I don't know the steps.I have no problem in create customer master in SAP. My only problem is how to return customer no. Any help would be appreciate. Thank you.
Best Regards,
Pavin>>u can use synch-Asynch bridge using BPM
This can not be done via sync-async bridge.There are 2 reasons for this
1.He has file adapter as sender and that doesn't support synchronous scenarios.
2.He has standard IDOC as receiver.there is no way you can fetch customer# from IDOC without writing a custom program,Thats why i said he need to either use RFC/Proxy or do some custom development.
Thanx
Aamir -
How to Identify an whether an Sales order is created through EDI Idoc
Hi all,
By seeing an Sales Order, How to identify whether the sales order is created through EDI Idoc or by other source.
Thanks in advance
Regards
ChakriHello Chakri,
As far as I know, for EDI orders a separate order type is created. So, they use to that create the order with an Idoc.
But, remember you can use other order types as well.
Thanks,
Babu Kilari
Maybe you are looking for
-
Unable to run Memory profiling, help please
Hi there, I installed the lastest version of JDeveloper 10 and created a very simple project(only have one class with Main()method) for testing purpose. I configure the Profiler in Project Properties page, setting the class as included instance, howe
-
How to upload company logo in webdynpro application
Hi, I need to upload the company logo in the View of a Webdynpro application. Can someone give me the steps for the same to be done? Thanks, Kundan
-
Can VMD_EI_API handle Create, Edit, and Delete Vendor Master records?
Hi Everyone, I have a development that requires to create, edit, and delete vendor master records through a webportal ui. Technically, it will be a background process in SAP because it must not have a dialog screen. In my search so far, there is no s
-
I'm on Oracle 9i Developer Suite and when I go to one of my forms (web-based), it's a TABBED-based canvas. I have a total of 6 tabs. Each one is based on a different data block tied to a table. One of my tabs doesn't show up. I have a WHEN-TAB-PAGE-C
-
Hi All, When I created the inbound proxy these are the objects generated. <b>Type Name Shorttext</b> Interface ZJSII_IN_JS_MI Proxy Interface Structure ZJSSRC_DT Proxy Structure Structure ZJSSRC_DT_HEADER P