Create Auto increment sequence number for list view report

Hi All,
Am using BAM 11.1.1.6 version, Have updating list report & wants to create auto increment sequence number at report level. Is it possible to create column at run time in BAM reports.
Please help.
Thanks.

Similar Messages

Creating auto-increment field in SharePoint List

In SharePoint, we can create the auto-incremental field by many ways, I am going to discuss two ways of doing it.
Calculated field
Item Event Receiver
1. Using Calculated field:
Using this we can accomplish it without doing any programing and it is a relatively simple way of doing it. By using “Calculated” column in SharePoint List we can create auto-increment field. We can accomplish this by creating a new column and choosing the
column type as “Calculated (calculation based on other columns)”. And in Formula field, we have to enter [ID]
In fact this will be using the values from “ID” field from SharePoint list that starts from 1.
For example, if we want to start our auto-increment column from 100, we can modify the “Formula” field of Create New column screen, we can have to enter [ID] + 99
For detailed info please follow the blog I wrote here: http://faisalrafique.wordpress.com/2011/03/19/creating-auto-increment-field-in-sharepoint-list/
2. Using Item Event Receiver:
By using this strategy, users have advantage to edit the existing values, we can also avoid it by making field read-only on feature activation. Using item event receiver, on ItemAdded event, we have to find the highest value among previously added items
and then save the incremented value to current newly created auto-incremental column.
For code of event reciever please follow the blog I wrote here:
http://faisalrafique.wordpress.com/2011/03/19/creating-auto-increment-field-in-sharepoint-list/
Happy Coding

Use Sharepoint Designer to create a Workflow for the list containing the field to increment. For my project I had an Invoice field that I wanted to start with 1001 and increment from there so I made the following workflow to do this.
In the new workflow screen in Sharepoint Designer create two actions in Step 1:
Calculate Current Item:ID plus 1000 (Output to Variable: calc)
then Set AutoIncrementNumber to Variable: calc
This is just a guide. If you just want the auto-increment to start with 1 then you can just use this step
Set AutoIncrementNumber to Current Item:ID
Also, make sure you select the correct name for your field in the Workflow action instead of AutoIncrementNumber.
Save the Workflow, close it, and then open it again in Sharepoint Designer. Check the box for "Start workflow automatically when an item is created." Save it again and then click on the Publish button to make it active on the sharepoint site. The value should
now increment for each new item created in the list.

Auto Increment Sequence Custom Field

Hi All,
I was wondering if it is possible
to have a custom field defined as an auto incrementing sequence number? E.g. Let’s say I go in and create a project for the first time, this field will show the value 1. The next project I go to create, the field shows the value 2 etc. etc.
If possible, how can this be implemented using customization? Can it be done in Project Online? Any help would be greatly appreciated. thank you!

Hi JSimoni1,
You can generate a project unique ID using a webpart, even with Project Online.
Please find below the procedure in EpmExpert blog:
http://epmxperts.wordpress.com/2012/05/21/generate-unique-id-for-project-using-a-webpart/
Note that the code might need some adjustments to stick to your business need.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Is it possible to auto increment a number in share point list ?

hello,
is it possible to generate an auto increment field in share point list?
for example, there are two fields [auto increment id] and [title]
lets say i create title as 'Steve' ; it will automate auto increment field with value 1
next , i insert title 'Paul' it ll populate the auto increment field with value 2.
thanks,
Jay

Hi Jay,
You can use the Item Id field of the SharePoint list which will get incremented by 1 whenever you add the new item.
you can refer the below threads for other options of auto increment id
http://social.technet.microsoft.com/Forums/sharepoint/en-US/134fd5f6-17ce-4044-a78e-e7a32b523190/creating-autoincrement-field-in-sharepoint-list?forum=sharepointgeneralprevious
http://social.technet.microsoft.com/Forums/sharepoint/en-US/39743bb3-872d-4788-96a8-2b9fb8813011/create-auto-increment-value-in-sharepoint-column?forum=sharepointgeneralprevious
My Blog- http://www.sharepoint-journey.com| Twitter
If a post answers your question, please click "Mark As Answer" on that post and "Vote as Helpful

Auto increment sequence

Can I do something like auto increment sequence in planning so that whenever a user adds new asset it takes a number from this sequence.
Thanks,
foksh

Hi,
Create a member called Counter in Accounts.
Increment the value everytime you add an asset and assign the value after update to asset number:
-Make sure member combination for the Counter values is fixed to one combination only
Counter->BegBalance->NoYear->(one member from all dimensions)=Counter->BegBalance->NoYear->(one member from all dimensions)+1;
"Asset Number" = Counter->BegBalance->NoYear->(one member from all dimensions);
Cheers,
Alp

How to auto increment a NUMBER(10) datatype

Anyone know the syntax on how to auto increment a number field every time a new row comes in?
TIA
CREATE TABLE loc_color_group_values(
     ID number(10) NOT NULL auto_increment, <----------------
     COLOR_CODE_ID number(10) default 0,
     PROD_LOC_ID number(10) default 0,
     COLOR_GROUP_CODE_ID number(10) default 0,
     PRIMARY KEY(ID)
);

Here is an example:
CREATE OR REPLACE TRIGGER "EXAMPLE_TRIG" BEFORE
INSERT ON "loc_color_group_values" FOR EACH ROW BEGIN
IF :NEW.id IS NULL THEN
    SELECT loc_color_group_values_seq.nextval INTO :NEW.id FROM dual ;
END IF;
END ;This allows you to overide the sequence without having to disable the trigger.

Sequence number for opportunities

Hello,
My customer needs a sequence number for opportunities... So I can create a custom field but is there a way to automatic generate a number to fill it ? or for that matter a sequence ?
Txs.
Antonio

Antonio, this functionality is not available at this time. This could be done using a custom web service program.

How to execute a same sequence number for the resulting dynamic rows

Hi friends,
I have a sequence and trigger(which will fire id for each and every row insert).
My scenario is, If i update more than 5 rows at a time means, i need to set a same sequence number example(1) for all the 5 rows.
Next time, if i update another 5 rows means, then i need to set a same sequence number (i.e) 2 for the next 5 rows.
So, my updation will be dynamic(may be 2 ,5, 10 rows at a time), But i need to set a same sequence number for one of the column for all the rows that i update.
Next time, if i update another set of rows means, then i need to set only the next sequence number(i.e) 2(assume that previously updated sequence for the before set of rows is 1) for another set of rows.
Like that sequence has to update in a sequential manner for more than one set of rows in that column.
How to achieve it friends.
example
id-----------------name
1-------------------A
1-------------------B
1-------------------C
1-------------------D
1-------------------E
2-------------------D
2-------------------E
2-------------------F
2-------------------G
3-------------------H
3-------------------IBrgds,
Mini

Hi,
You forgot to mention your version.
If you want a trigger based solution, then in 10g you need two triggers
1. A statement level trigger that takes sequence.nextval into a dummy variable that will not be used.
2. A for each row trigger that uses sequence.currval.
In 11g you should be able to write a single, composite trigger.
If you want a solution with no triggers, it could look something like
SQL> create sequence s start with 10;
Sequence created.
SQL>
SQL> create or replace function s_wrapped
2 return number
3 as
4     v number;
5 begin
6     select s.nextval
7     into v
8     from dual;
9
10     return v;
11 end s_wrapped;
12 /
Function created.
SQL> create table tab1 as (Select level x, cast(null as number) y from dual connect by level <= 5);
Table created.
SQL> update tab1
2    set y = (select s_wrapped from dual)
3   where x <= 3;
3 rows updated.
SQL> commit
2 /
Commit complete.
SQL> select *from tab1
2 /
       X          Y
       1         10
       2         10
       3         10
       4
       5
SQL>Regards
Peter

Screen Sequence number for MM01 T.Code

Hi,
Do we have any screen sequence for MM01 T.Code ? If Yes, Can you tell me the screen sequence number for MM01 and how to find it for other T.Codes also?
Thanks in advance
Pavan

Hi,
Follow this path
SPROIMGLogistic generalMaterial masterConfiguring the Material MasterDefine Structure of Data Screens for Each Screen Sequence
21 will be the u201CStd ind.(short) tab pagesu201D
In this if you double click on u201CData screensu2019 in that u201CSub screensu201D if you click on that you can find the all screen sequences for material master, program and screen number all you can find there
Regards,
Pramod

List View Report with pipelined function in Mobile application and ORA-01007: variable not in select list

Hi!
I have a problem with List View Report in mobile application (theme 50 in apex) after updating to apex 4.2.2. I created Report -> List View. I used select from pipelined function in Region Source. Then when page is running and submited three times (or refreshed three times) I get an error:
Error during rendering of region "LIST VIEW".
ORA-01007: variable not in select list
Technical Info (only visible for developers)
is_internal_error: true
apex_error_code: APEX.REGION.UNHANDLED_ERROR
ora_sqlcode: -1007
ora_sqlerrm: ORA-01007: variable not in select list
component.type: APEX_APPLICATION_PAGE_REGIONS
component.id: 21230833903737364557
component.name: LIST VIEW
error_backtrace:
     ORA-06512: at "APEX_040200.WWV_FLOW_DISP_PAGE_PLUGS", line 4613
     ORA-06512: at "APEX_040200.WWV_FLOW_DISP_PAGE_PLUGS", line 3220
I get this error only when I use select from pipelined function in Region Source (for example: "select value1, value2 from table(some_pipelined_function(param1, param2)) ").
You can check it on http://apex.oracle.com/pls/apex/f?p=50591 (login - demo, password - demo).
In this application:
- I created package TAB_TYPES_PKG:
create or replace PACKAGE TAB_TYPES_PKG IS
TYPE cur_rest_r IS RECORD (
    STR_NAME          VARCHAR2(128),
    INFO              VARCHAR2(128)
TYPE cur_rest_t IS TABLE OF cur_rest_r;
END TAB_TYPES_PKG;
- I created pipelined function TEST_FUNC:
create or replace
FUNCTION TEST_FUNC
RETURN TAB_TYPES_PKG.cur_rest_t PIPELINED IS
r_cur_rest TAB_TYPES_PKG.cur_rest_r;
BEGIN
r_cur_rest.STR_NAME := 'ROW 1';
r_cur_rest.INFO := '10';
PIPE ROW (r_cur_rest);
r_cur_rest.STR_NAME := 'ROW 2';
r_cur_rest.INFO := '20';
PIPE ROW (r_cur_rest);
r_cur_rest.STR_NAME := 'ROW 3';
r_cur_rest.INFO := '30';
PIPE ROW (r_cur_rest);
r_cur_rest.STR_NAME := 'ROW 4';
r_cur_rest.INFO := '40';
PIPE ROW (r_cur_rest);
r_cur_rest.STR_NAME := 'ROW 5';
r_cur_rest.INFO := '50';
PIPE ROW (r_cur_rest);
RETURN;
END TEST_FUNC;
- I created List View Report on Page 1:
Region Source:
SELECT str_name,
       info
FROM TABLE (TEST_FUNC)
We can see error ORA-01007 after refresing (or submiting) Page 1 three times or more.
How to fix it?

Hi all
I'm experiencing the same issue. Predictably on every third refresh I receive:
Error
Error during rendering of region "Results".
ORA-01007: variable not in select list
Technical Info (only visible for developers)
is_internal_error: true
apex_error_code: APEX.REGION.UNHANDLED_ERROR
ora_sqlcode: -1007
ora_sqlerrm: ORA-01007: variable not in select list
component.type: APEX_APPLICATION_PAGE_REGIONS
component.id: 6910805644140264
component.name: Results
error_backtrace: ORA-06512: at "APEX_040200.WWV_FLOW_DISP_PAGE_PLUGS", line 4613 ORA-06512: at "APEX_040200.WWV_FLOW_DISP_PAGE_PLUGS", line 3220
OK
I am running Application Express 4.2.2.00.11 on GlassFish 4 using Apex Listener 2.0.3.221.10.13.
Please note: this works perfectly using a classic report in my desktop application; however, no joy on the mobile side with a list view. I will use a classic report in the interim.
My region source is as follows:
SELECT description AS "DESCRIPTION", reference AS "REFERENCE" FROM TABLE(AUTOCOMPLETE_LIST_VIEW_FNC('RESULTS'))
The procedure:
FUNCTION AUTOCOMPLETE_LIST_VIEW_FNC(
      p_collection_name IN VARCHAR2)
    RETURN list_row_table_type
AS
    v_tab list_row_table_type := list_row_table_type();
BEGIN
    DECLARE
      jsonarray json_list;
      jsonobj json;
      json_clob CLOB;
    BEGIN
      SELECT clob001
      INTO json_clob
      FROM apex_collections
      WHERE collection_name = p_collection_name;
      jsonobj              := json(json_clob);
      jsonarray            := json_ext.get_json_list(jsonobj, 'predictions');
      FOR i IN 1..jsonArray.count
      LOOP
        jsonobj := json(jsonArray.get(i));
        v_tab.extend;
        v_tab(v_tab.LAST) := list_row_type(json_ext.get_string(jsonobj, 'description'), json_ext.get_string(jsonobj, 'reference'));
      END LOOP;
      RETURN(v_tab);
    END;
END AUTOCOMPLETE_LIST_VIEW_FNC;
Thanks!
Tim

List View Report (theme 50 - jQuery Mobile Smartphone).

Hi,
I am creating a List View Report (theme 50 - jQuery Mobile Smartphone).
I have say the following settings..
Text Column - PRODUCT_DESC
Link Target - f?p=111:22:......
my PRODUCT_DESC is too long say 150 to 200 characters.
When I run my application on mobile...
1. when I am using the Link target, then I am not getting the complete Product Desc values displayed.. it's displaying just initial 15.. 20 characters of Prodcut Desc column and then arrow sign for link..
2. If I am not using the Link target, then it's displays complete values of Product Desc (all the 150 .. 200 characters) and no link arrown sign.
My question is I want to use the link target as well as want to display complete value of product desc.. any idea how can I do that..
Thanks,
Deepak

Hi,
I am creating a List View Report (theme 50 - jQuery Mobile Smartphone).
I have say the following settings..
Text Column - PRODUCT_DESC
Link Target - f?p=111:22:......
my PRODUCT_DESC is too long say 150 to 200 characters.
When I run my application on mobile...
1. when I am using the Link target, then I am not getting the complete Product Desc values displayed.. it's displaying just initial 15.. 20 characters of Prodcut Desc column and then arrow sign for link..
2. If I am not using the Link target, then it's displays complete values of Product Desc (all the 150 .. 200 characters) and no link arrown sign.
My question is I want to use the link target as well as want to display complete value of product desc.. any idea how can I do that..
Thanks,
Deepak

Creating Parameters in RTF Template for BI Publisher Report

hi,
I have created Parameters in my BI Publisher Report and in SQL query. But i need to create same parameters in RTF Template , so that when i publish this report in dashboard , parameters will be visible. Can you please tell me how to create Parameters in RTF Template for BI Publisher Report ? I am not finding option. Please let me know .
Thanks in advance
Gayathri.

all the parameter's value will be there in your xml .
just you need to add parameter heading and corresponding xml tag name to get the parameter value on the report.
if u dont have you can try like below
https://blogs.oracle.com/xmlpublisher/entry/get_your_parameters_here_guv
Declare Parameter in RTF Template
Before you use the parameter in the RTF template file you need to declare it first. You can do so by having the following syntax.
<?param@begin:%parameter_name%?>
Note: where %parameter_name% is the parameter name that you have created at the BI Publisher Server UI.
Here is an example:
<?param@begin:param1?>
Use it in RTF Template!
Once it’s declared in the RTF template you can start using it as the same way you use the variable. You need to just add ‘$’ prefix in front of the parameter name. Here is the example:
<?$param1?>
The above example would print the parameter value in the report output. If you want to use this value in your condition or calculation you can simply use it as ‘$param1’. Yes, it’s that simple.
If you are not sure if and how the parameter values are passed to the report when you run the report you can use this command in your RTF template, which will return all the parameter values passed to the RTF template at the runtime.
<?xdoxslt:getXDOProperties($_XDOCTX)?>
http://kirti-bi-solutions.blogspot.com/2009/06/passing-parameters-from-obiee.html

My ipod touch was stolen and I need the serial number for the police report how can i recover it

my ipod touch was stolen and i need the serial number for the police report how can i get that

- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

HT4865 i lost my phone where can i get the serial number for a police report

My phone was recently stolen. Where can I get the serial number for a police report?

It would be on the box it came in. It would also be on your support profile is you ever signed up for one (here: https://supportprofile.apple.com). Finally, if you ever synced it with iTunes on your computer you can find it by doing the following:
Launch iTunes on your computer.
Hold down your Control key, then on the menu bar in iTunes click iTunes>About iTunes (Mac) or Help>About iTunes (PC).
Any previously synced devices will scroll in a pop-up window; press the space bar to stop scrolling so you can write down the serial number.

List view to include a column or field which would display the sequence number in a view

I have a view for a list which displays items following any condition or sorting. Now, i would like to display the list items in such a way that
the auto incremented numbers are displayed as an arbitary field which would display the numbers such that
its just going to display items in sequence. Is there anything that can be done in sharepoint designer for the list to accomodate a column/field which would display the sequence numbers.
Thanks

There are columns such as
Name, Goals
and it should be arranged in descending order of Goals and it could be paginated but also a column should be displayed for ranks e.g
Name Goals Rank
A          40     1
B          39     2
C          30     3
So, the idea is the ways it is sorted in descending order, if we possibly have a counter then we could display the ranking of the items.
Thanks

Create Auto increment sequence number for list view report

Similar Messages

Maybe you are looking for