"ctrl-c" won't work in terminal

All,
I just finished installing maverick. and for some weird reason, "ctrl-c"won't work in terminal.
i cannot break, and my commands will keep running.
for example pinging google will keep going and the only way to stop that, is to close the whole terminal.
pressing "ctrl z"or "Ctrl c"wont work, it just shows z or c characters...
I checked the keyboard viewer and noticed two characters always set to orange which are:
' & `
now the weird thing, that if these were trully pressed, i wouldn't be able to type and you'll actually see lots of ticks and single quotation marks.
Any hint on how to fix this ?

Melophage,
Thanks for answering.
i'm not sure i understood your questions proeprly, so i will try my best to answer,hoping that's the right response.
1. input sources: is set to "US. international - pc"
2. output of stty -a:
stty -a
speed 9600 baud; 24 rows; 80 columns;
lflags: icanon isig iexten echo echoe -echok echoke -echonl echoctl
          -echoprt -altwerase -noflsh -tostop -flusho pendin -nokerninfo
          -extproc
iflags: -istrip icrnl -inlcr -igncr ixon -ixoff ixany imaxbel iutf8
          -ignbrk brkint -inpck -ignpar -parmrk
oflags: opost onlcr -oxtabs -onocr -onlret
cflags: cread cs8 -parenb -parodd hupcl -clocal -cstopb -crtscts -dsrflow
          -dtrflow -mdmbuf
cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = <undef>;
          eol2 = <undef>; erase = ^?; intr = ^C; kill = ^U; lnext = ^V;
          min = 1; quit = ^\; reprint = ^R; start = ^Q; status = ^T;
          stop = ^S; susp = ^Z; time = 0; werase = ^W;
And this is the view of my keyboard viewer:

Similar Messages

Qosmio x300-130 - ctrl-buttons won't work anymore

Hello everyone
Im having some problems with my ctrl-buttons. They simply won't work anymore, they used to but slowly they became unstable and now they won't work at all.
So now I ask you if there is any way to solve this problem without sending the computer to repairs.
My computer is a Qosmio x300-130 and I have had it for about two months.

Hello
It is really strange issue with those CTRL buttons functionality. Googling around I found several forums where people report about this. Unfortunately nobody has explanation why this happen.
I use Vista and WXP SP3 on my Satellite Pro P300 and until now everything works properly.
I can just imagine some Microsoft update is responsible for this. Try to roll back OS to earlier time using system restore tool.
Please post results.
Lets see if someone else has other advice.

Executable file won't work in terminal when I'm in it's folder

I don't get it, I thought I could just go to a folder then I can execute an excutable file in that folder by simply typing it. For some reason terminal wants me to put in the entire path of the file to execute it even if I'm in the folder. Clearly this isn't DOS . How do I do this? ./<file> ? Is that correct? Thanks.

Your PATH environment variable tells the shell where to look for commands you type, if there is not path information.
If you want the shell to look in the current working directory, your PATH environment variable must have a period as one of the entries.
export PATH=".:$PATH"
would make your shell look in the current working directory for the command you are entering before looking in any of the other PATH directory.
NOTE: This can be considered insecure, as if you are on a multi-user system, and then are in some directory where another user has put a file such as 'ls' that you execute instead of the /bin/ls, then you could be tricked into doing something the other user wants.
Or you can invoke commands in any random directory by supplying ./ in front of the file name, or providing the full path.

HT4527 TRIED, TRIED, and TRIED! It won't work!

Now I have tried and
tried and tried to transfer my iTunes library from my old computer to
my new one for over half a year. The methods described here won't
work. Neither does the (few) ones I found on other sites.
I would probably
have taken shorter time to download the music one more time directly
from the 300+ CDs (full format – I do not want compressed) I have
(half with classic music not available at iTunes store, Spotify or
elsewhere), than trying...
Some part of some
instructions here (and otherwise) does not seem to be up to date, or
details is wrong regarding Windows 8.1. Other just don't work. I
have also tried many other ways that my brain can come up with. But
always only one of the CD is found by iTunes.
Maybe Apple want one
to have all in the cloud, but a few 100s of Giggs would probably cost
me a zillion €$£s a month – so it's not an option. Or that
things like this only can work if one has a Mac (although I have
consider buying a Mac, since Windows 8 is horrible, but I have
programs that only exists in versions that runs under Windows).
Unfortunately this
also means that I can not sync my iPod and iPad with the new computer
(since everything on the units will be deleted when synced to a new
computer). And this also prevents me to update to new iOS 8. (I
have all data except music and larger sized pictures in clouds –
although this is sometimes a problem summertime at my summerhouse in
a low populated area with very bad internet possibilities.)
So if someone
actually knows how to do this (from hard drive with files from iTune
version half year ago on XP, to latest iTunes on Windows 8.1 –
PLEACE let me know!
Apple should really
think about this. There should just be a simple import function.
Copyright issues might exist, but it will be no difference than the
methods described here (if they work). [And in Sweden we actually
pay a special tax to copyright holders on storing devices (computers,
hard drives, mobile phones, etc) to compensate for this.]
[Also: there are
issues with this page. When typing, it is not possible to go back in
the text and edit. Also I had to type this one more time when the
web page just “died”. All of IE (standard – not metro) just
locks itself and have to be aborted with ctrl+alt+del]

Hi there beryl,
Welcome to Apple Support Communities.
It sounds like you’re seeing an “error 7” alert message when launching iTunes. Take a look at the article linked below, it provides more information about that alert and troubleshooting steps that’ll generally resolve the issue.
iTunes for Windows: "Error 7" message when opening iTunes - Apple Support
Cheers,
-Jason

Photoshop elements 4.0 won't work

Adobe photoshop 4.0 won't work. After installing a hp scanner, I upgraded a driver for it and had problems. So I did a system restore for oct 2009 and now photoshop won't work.I fully uninstalled all my adobe programs except active x then reinstalled photoshop elements. I have had a series of errors including "error reading configuration file" and "adobe help cannot start model effor subsystem 1" I searched this and found the updated help file and installed that. So once I open adobe, i can pull a picture into it then it won't work. Every button I press just gives a ding sound.

You mean to say you are able to run but when you try opening any image it crashes. Can you try resetting the preferences:
Click on the EDITOR icon -- the quickly hold down CTRL+SHIFT+ALT keys, this will generate a dialogue box to delete settings.
try and let me know
-Garry

Remote Desktop Shortcuts won't work in FULLSCREEN mode

Hello,
I found lots of
shortcuts won’t work during remote desktop connection between Win7 64 host (home premium) to Win 7 64 guest (professional):
Include:
ALP+PAGE UP/PAGE DOWN
CTRL + ALT + ±
In order to make them work I need to exit full screen mode of remote desktop first (can be done with CTRL+ALT+BREAK)
Is there any fix?
Bob

Hi，
Have you check the "Local Resources" under Remote Desktop Connection "properties",? just as screen shot below:
You can also test this issue with On-screen keyboard, check if issue persists.
Yolanda Zhu
TechNet Community Support

External optical drive won't work on macbook pro retina.

I have a macbook pro retina which doesn's have an optical drive. I have bought an optical drive. When I plug it in and put a disk in I can hear the disk spinning and the light comes on but nothing happens on my mac. It doesn't seem to recognise it. Any suggestions?

Anniefb1 wrote:
I have a macbook pro retina which doesn's have an optical drive. I have bought an optical drive. When I plug it in and put a disk in I can hear the disk spinning and the light comes on but nothing happens on my mac. It doesn't seem to recognise it. Any suggestions?
Just had that happen to me.
First, run Disk Utility and see if the SuperDrive (it is an Apple SuperDrive isn't it?) is listed. Is the disk you inserted shown? If not, hold down the option key and click the Apple menu - choose System Information and when that shows up, choose USB. See if it's listed there. If it is but neither the drive nor the disk you inserted appears on the Desktop, the side bar of the Finder window, or Disk Utility, return it for a refund (if it's within 14 days of purchase) or a replacement. That's what I had to do a few hours ago and the replacement works as it should.
BTW, if you want the disk you inserted back, and pressing the trackpad as you reboot doesn't eject the disk, as a last resort run Terminal and enter (copy and paste the following)
/usr/bin/drutil eject
to try to force the disk to eject. It probably won't work (it didn't for me) but if it does, at least you get that disk back.

External Optical Speakers won't work on my G5

I have a Power Mac G5 running Tiger 10.4.11 and Logictech 5.1 Dolby Surround Sound Speakers. I had them setup with this system a few years ago and then upgraded to leopard and compatibility was fine. My HDD recently died and I lost my leopard disc so now I'm back to Tiger since that's what the backup discs are. Now that I got a new HDD and loaded the software the speakers won't work. The speakers themselves are fine. I can use the remote to test each speaker which sends pink noise to each one. That proves the connections are fine and the speakers aren't bad. I checked the connection to the optical port in the back of the tower and it is lit up red so that's good. I tested the speakers playing music and playing a DVD and neither worked so it's something to do with the computer not recognizing them. Headphones work just fine with it. In the Sound pane under Digital Out it says "The selected device has no output controls". According to the help tutorial it says I should see the speaker in the System Profiler, which I don't, but it doesn't go further into 'if you don't see them'. Anyone know other options I can try?

Anniefb1 wrote:
I have a macbook pro retina which doesn's have an optical drive. I have bought an optical drive. When I plug it in and put a disk in I can hear the disk spinning and the light comes on but nothing happens on my mac. It doesn't seem to recognise it. Any suggestions?
Just had that happen to me.
First, run Disk Utility and see if the SuperDrive (it is an Apple SuperDrive isn't it?) is listed. Is the disk you inserted shown? If not, hold down the option key and click the Apple menu - choose System Information and when that shows up, choose USB. See if it's listed there. If it is but neither the drive nor the disk you inserted appears on the Desktop, the side bar of the Finder window, or Disk Utility, return it for a refund (if it's within 14 days of purchase) or a replacement. That's what I had to do a few hours ago and the replacement works as it should.
BTW, if you want the disk you inserted back, and pressing the trackpad as you reboot doesn't eject the disk, as a last resort run Terminal and enter (copy and paste the following)
/usr/bin/drutil eject
to try to force the disk to eject. It probably won't work (it didn't for me) but if it does, at least you get that disk back.

My sound won't work, how do i fix it if I've already tried the audio MIDI setup?

So i plugged in a stereo system and when i unplugged it the sound won't work anymore unless it's plugged in? How do i fix it?

Check this document.
Error "Licensing has stopped working" | Mac OS
Try each step.
When you get to the license recovery kit, type sudo, leave a space and drag LicenseRecover.py into
the Terminal screen, then hit Enter. It should look like this:
Enter your password, but remember the cursor will not move. Just hit enter and let the script run.

[Solved] history -c won't work

i was try to clear bash history with :
history -c
but it won't work , actually when i close terminal and reopen it history still exist :-??
Last edited by Milad (2012-05-06 15:17:57)

Gcool wrote:Doesn't "history -c" just clear the history saved in RAM (not what's actually saved in ~/.bash_history)? Someone please correct me if I'm wrong here (not 100% sure of this).
The command will not work from a terminal emulator. You still have bash running when you close the terminal emulator. All you are clearing is that terminal instance's history. To completely clear the history file with the command 'history -c', you need to run it from the login shell.
You could use this to clear the history file:
$ > ~/.bash_history

On Yosemite, pasteboard/clipboard no longer works with Terminal.

After upgrading to Yosemite, I can no longer copy text from other apps and then paste into Terminal. Nor can I drag a file from Finder to Terminal and get its path shown. With Terminal, clipboard/pasteboard now only works within its own sandbox.
Am I missing any new default options?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Adobe CS5 Eraser tool won't work

My eraser tool won't work on any adjustment layers I add. It will erase on a background copy but not on a curves or black and white layer. It's strange because my brush tools are working and the eraser tool has been working up until now. It's not even showing up on the thumbnail image and my opacity is set to 100 % and I have tried pencil, block and brush tool. The burn and doge tools won't work either.
I have tried resetting my tools under the drop down menu awa resetting tool preferences, preferences and restarting the program whilst holding down ctrl, alt, shift. I am working on a Microsoft Windows 7 (OS). Everything else seems to be working okay.
Any help or suggestions would greatly be appreciated
Tamzyn

If you paint Black on the Layer Mask, it will mask the effect of the adjustment in the Adjustment Layer. Likewise if you paint White on the Layer Mask it will cause the adjustment to take full effect. Grays in between will cause the adjustment to be only partially applied in that area.
If you happen to have Black selected for the background color, the Eraser tool will act like a brush painting black (and thus hiding the adjustment) when you use it on the Layer Mask. That's probably what you did to see the Eraser tool work on an Adjustment Layer in the past.
As stated above, most folks use the brush tool for working on Layer Masks.
-Noel

In Windows 7 Itunes loads and runs fine. When I close it down and try to get back in it just sits there. It won't work until I reboot the computer.

I am running WIndows7. I boot up load itunes and it runs fine.. all aspects.
When I close it down and try to get back in later it just sits there. It won't work until I reboot the computer.
I have updated and reloaded several times. Nothing

Let's see whether this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working?
If that works, make sure you do this below to prevent same problem after restarting windows:
Go to. START button, type in
MSCONFIG
Hit ENTER
Click STARTUP Tab, Uncheck "Apple Push", click OK.
Restart Windows.

Xcode continuous integration, Subversion and self-signed certificate won't work altogether.

Hi!
I've installed on MacMini Maverick OS with OSX Server.
Then I've configured the Xcode continuous integration with Subversion (using self-signed certificate), also created bots and etc.
But It won't work.
Attached is the log:
Aug 24 14:03:27 osxserver.iloffice.myhrtg.net xcsbuildd[82719] <Debug>: [XCSCheckoutOperation.m:717 7c087310 +0ms] revision: (null) Aug 24 14:03:27 osxserver.iloffice.myhrtg.net xcsbuildd[82719] <Debug>: [XCSCheckoutOperation.m:718 7c087310 +0ms] log: (null) Aug 24 14:03:27 osxserver.iloffice.myhrtg.net xcsbuildd[82719] <Debug>: [XCSCheckoutOperation.m:719 7c087310 +0ms] checkoutError: Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “svn.myheritage.co.il” which could put your confidential information at risk." UserInfo=0x7fb388c4b4e0 {NSURLErrorFailingURLPeerTrustErrorKey=<SecTrust 0x7fb388c18ff0 [0x7fff7baddf00]>, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSUnderlyingError=0x7fb389904370 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “svn.myheritage.co.il” which could put your confidential information at risk.", NSErrorPeerCertificateChainKey=( "<SecCertificate 0x7fb388c6f490 [0x7fff7baddf00]>" ), NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “svn.myheritage.co.il” which could put your confidential information at risk., NSErrorFailingURLKey=https://svn.myheritage.co.il:8443/svn/mobile/MyHeritageMobileiPhone/branches/Mob ile_with_albums_and_inapp, NSErrorFailingURLStringKey=https://svn.myheritage.co.il:8443/svn/mobile/MyHeritageMobileiPhone/branches/Mob ile_with_albums_and_inapp, NSErrorClientCertificateStateKey=0} Aug 24 14:03:27 osxserver.iloffice.myhrtg.net xcsbuildd[82719] <Error>: [XCSCheckoutOperation.m:732 7c087310 +0ms] Error in SVN checkout Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “svn.myheritage.co.il” which could put your confidential information at risk." UserInfo=0x7fb388c4b4e0 {NSURLErrorFailingURLPeerTrustErrorKey=<SecTrust 0x7fb388c18ff0 [0x7fff7baddf00]>, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSUnderlyingError=0x7fb389904370 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “svn.myheritage.co.il” which could put your confidential information at risk.", NSErrorPeerCertificateChainKey=( "<SecCertificate 0x7fb388c6f490 [0x7fff7baddf00]>" ), NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “svn.myheritage.co.il” which could put your confidential information at risk., NSErrorFailingURLKey=https://svn.myheritage.co.il:8443/svn/mobile/MyHeritageMobileiPhone/branches/Mob ile_with_albums_and_inapp, NSErrorFailingURLStringKey=https://svn.myheritage.co.il:8443/svn/mobile/MyHeritageMobileiPhone/branches/Mob ile_with_albums_and_inapp, NSErrorClientCertificateStateKey=0} <stderr>= (null) Aug 24 14:03:27 osxserver.iloffice.myhrtg.net xcsbuildd[82719] <Error>: [XCSOperation.m:33 7c087310 +0ms] Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “svn.myheritage.co.il” which could put your confidential information at risk." UserInfo=0x7fb388c4b4e0 {NSURLErrorFailingURLPeerTrustErrorKey=<SecTrust 0x7fb388c18ff0 [0x7fff7baddf00]>, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSUnderlyingError=0x7fb389904370 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “svn.myheritage.co.il” which could put your confidential information at risk.", NSErrorPeerCertificateChainKey=( "<SecCertificate 0x7fb388c6f490 [0x7fff7baddf00]>" ), NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “svn.myheritage.co.il” which could put your confidential information at risk., NSErrorFailingURLKey=https://svn.myheritage.co.il:8443/svn/mobile/MyHeritageMobileiPhone/branches/Mob ile_with_albums_and_inapp, NSErrorFailingURLStringKey=https://svn.myheritage.co.il:8443/svn/mobile/MyHeritageMobileiPhone/branches/Mob ile_with_albums_and_inapp, NSErrorClientCertificateStateKey=0} Aug 24 14:03:27 osxserver.iloffice.myhrtg.net xcsbuildd[82719] <Debug>: [XCSOperation.m:28 7c087310 +0ms] Cancelling operation: XCSCheckoutOperation Aug 24 14:03:27 osxserver.iloffice.myhrtg.net xcsbuildd[82719] <Error>: [XCSBuildBundle.m:790 7c087310 +0ms] Got an error from the checkout operation: Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “svn.myheritage.co.il” which could put your confidential information at risk." UserInfo=0x7fb388c4b4e0 {NSURLErrorFailingURLPeerTrustErrorKey=<SecTrust 0x7fb388c18ff0 [0x7fff7baddf00]>, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSUnderlyingError=0x7fb389904370 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “svn.myheritage.co.il” which could put your confidential information at risk.", NSErrorPeerCertificateChainKey=( "<SecCertificate 0x7fb388c6f490 [0x7fff7baddf00]>" ), NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “svn.myheritage.co.il” which could put your confidential information at risk., NSErrorFailingURLKey=https://svn.myheritage.co.il:8443/svn/mobile/MyHeritageMobileiPhone/branches/Mob ile_with_albums_and_inapp, NSErrorFailingURLStringKey=https://svn.myheritage.co.il:8443/svn/mobile/MyHeritageMobileiPhone/branches/Mob ile_with_albums_and_inapp, NSErrorClientCertificateStateKey=0} Aug 24 14:03:27 osxserver.iloffice.myhrtg.net xcsbuildd[82719] <Debug>: [XCSBuildBundle.m:850 7c087310 +0ms] Starting upload files operation Aug 24 14:03:27 osxserver.iloffice.myhrtg.net xcsbuildd[82719] <Debug>: [XCSBuildBundle.m:1018 7c087310 +0ms] Updating bot run status to running, substatus to uploading Aug 24 14:03:27 osxserver.iloffice.myhrtg.net xcsbuildd[82719] <Info>: [CSRemoteServiceClient.m:151 7c087310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{AuthService.enterMagicalAuthRealm()} Aug 24 14:03:27 osxserver.iloffice.myhrtg.net xcsbuildd[82719] <Debug>: [XCSBuildHelper.m:97 7c087310 +38ms] Updating bot run with GUID cccf1c74-6c5a-4fff-a57f-5e5bead09457 Aug 24 14:03:27 osxserver.iloffice.myhrtg.net xcsbuildd[82719] <Debug>: [XCSBuildHelper.m:102 7c087310 +0ms] Updating bot run (cccf1c74-6c5a-4fff-a57f-5e5bead09457): { guid = "cccf1c74-6c5a-4fff-a57f-5e5bead09457"; status = running; subStatus = uploading; } Aug 24 14:03:27 osxserver.iloffice.myhrtg.net xcsbuildd[82719] <Info>: [CSRemoteServiceClient.m:151 7c087310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{XCBotService.updateBotRun:({ guid = "cccf1c74-6c5a-4fff-a57f-5e5bead09457"; status = running; subStatus = uploading; })}
Hope you'll be able to assist me find what I'm doing wrong.
Thanks in advance.

Did anyone find a way around this? I have the exact same error and tried the exact same solution.
The Xcode 5 release notes described a problem that sounds similar.
Communicating with a remote SVN repository over HTTPS can fail with an error similar to “Error validating server certificate for server name.” Edit the file /Library/Server/Xcode/Config/xcsbuildd.plist and change the TrustSelfSignedSSLCertificates key from false to true. Then, from a Terminal window, run: sudo killall xcsbuildd. 14639890
https://developer.apple.com/library/ios/releasenotes/DeveloperTools/RN-Xcode/Cha pters/xc5_release_notes.html
I haven't found a similar fix for Xcode 6 though.

TS1277 after installing itunes, my computer won't recognize my cdrom/burner any longer. Worked ok before and I have uninstalled itunes and it works again and when I reinstall itunes it won't work again. I have also went into registry files and deleted

After installing itunes, my desktop computer doesn't recognize my internal cd rom/burner. I removed itunes and it works ok and when I reinstall itunes it won't work again. I went into the windows registry files and deleted the lower filter which is one correction for this and it worked ok until the next itunes upgrade and now it won't work again. If anyone knows what to do please let me know. My device manager shows a code "10"

My device manager shows a code "10"
That suggests an AFS.sys issue. But we'd better doublecheck.
Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". (If you're running iTunes 11.0.x you'll need to bring up your menu bar first to see the Help menu.) Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here. (Use your Ctrl-V keyboard shortcut to paste.)

"ctrl-c" won't work in terminal

Similar Messages

Maybe you are looking for