Create change lists for HDCAM project without Cinema Tools?

Hi
We have an HD project, shot on video, and are getting to final stages of mixing. Is there way to set a version, and then make changes and generate a change list? Needless to say, we haven't been using Cinema Tools (and the Export Change List process asks us to select a CT database). Is this only possible for film projects?
Thanks!
Matt

Actually, I figured it out.
1) Open Cinema Tools and create a new, blank database. Remember its name and where you saved it.
2) Open your original sequence in FCP. Go to FIle - Export - Cinema Tools Film Lists. If it's a video project, you can ignore the film-specific fields (footage length, key numbers and the like), but make sure that "Save a Cinema Tools program file" is ticked. In the columns on the right, I have "Time", "Source Time" and "Clip name" added. When prompted, locate your database file.
3) Export the file.
4) Now, open the changed sequence in FCP. Go to File - Export - Cinema Tools Change List. Locate the Cinema Tools program file you saved earlier.
You can select "Combine deletions" if you don't want to see separate edits across a multi-clip deletion. (ie, trim tail, delete clip, delete clip, trim head).
The first few pages will probably be most useful for video projects, since they use timecodes; the other sections of the report seem to be based on key codes.
Matt

Similar Messages

Change Request Management "There is no task list for this project"

Hello!
I would like to use the functionality of CharM in SOLMAN 4.0.
When I enter the Tcode /n/tmwflow/proj I receive the waring/error "There is no task list for this project" (/TMWFLOW/TRACK_N114)
If I create my own task list via Task list --> create
I get the warning "You cannot change task lists in the SAP namespace"
What are the steps to define task list for my project?
Do I need to configure SPRO ... --> Extended Configuration --> Schedule Manager?
The second warning I get: "NO CTS projects created yet" or
"The Solution Manager project does not have an active CTS project yet".
How can these warnings/errors be corrected?
Thank you very much!
regards

Hi,
Pls click the check button(next to activate button)
see the SLG1 log generated remove the errors shown in red.
One it is done u press the refresh button & thn u cn create the task list
chk
https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
Regards
Prakhar

How to create a validation for the project coding mask

Hi,
Would just like to ask how to create a validation for the project coding mask wherein the WBS elements hierarchy will be checked against the template saved. For example,
project coding mask is XXXX-XXXXX-XX-X-X-X-00-X
mother WBS should be XXXX-XXXXX-X and lower level WBS would be XXXX-XXXXX-XX.
The validation should not allow a mother WBS to be XXXX-XXXXX-XX.
How can we go about this?

Hi Jacquiline Bersamin,
You can use validation with the combination of the level and the coding mask.
In the validation:
Pre requisite: WBS level = 1
Validation: Prps-posid = prps-posid :1-12:
Message : Error
If required you can give the parameters for your detail error message.
Please let me know if this does not work.
Thanks
Regards
Srinivasan Desingh

Creating change log for sales order

hi all,
i want to create change log for any given sales order if it exists.
can any one tell me how to do that??

Hi Gouri,
CDHDR and CDPOS are the tables for all change history.
CDHDR contains the details such as who made the change, when, using what tcode and the change type ie. update, delete.
CDPOS contains the field name which was changed, its old value and its new value.
The change document object is VERKBELEG for sales documents.
The object value is the SD document number with leading zeros.
The following link will be also useful.
http://www.sap-img.com/ab024.htm
Regards,
Nitin.

Regarding Creating Functional Specs for BI project

Hi Gurus,
I am looking for some documents on "Creating Functional Specs for BI project", as my prokect is in the initial stage.
Hence we require to collect relevant info for implementing the FI-CO, SD & MM with BI project.
I will be assigning points.
My ID is: [email protected]
Thank you.
Regards,
Pradeep Kandepu
Edited by: pradeep kandepu on May 30, 2008 7:32 AM

HI shanbhu
can u please send those document to me also..
and if you hace send me the Technical spec also
My id is [email protected]
Edited by: Bramhananda Reddy on Jun 7, 2008 4:31 PM
Edited by: Bramhananda Reddy on Jun 7, 2008 4:31 PM

Change customer for a project!!!!!!!!

Dear Gurus,
I have a project number for which was changed to a supply order.
Just i created the project entering the details.No cost or anything assigned to this.
Now i want to assign this project for another project contract i received now.
I am able to change the project details like name, long name etc.
But i am not able to change the "customers and contacts " and sales man details from Projects Templates.
Can any one able to guide me, how can i edit the customer and contacts.

Hi
The easiest way is to abandon this project and start a new one :)
If you insist on staying with the same project, you may add a different customer to the same project.
For the wrong customer go and update the contribution percentage to zero (using Tools > Examine).
Dina

Create numbered list for table of contents 5.2.2

Cannot change format in the table of contents to create a numbered list.

So you cannot create a numbered list for the Table of Contents in iWork Pages 5.2.2.?
You cannot make this:
1. Name of Chapter One.........................5
2. Name of Chapter Two.........................9
You have to live with
Name of Chapter One.............................5
Name of Chapter Tow..............................9

Create .SCA file for MII project

Please let me know the steps in creating .SCA file for deploying MII projects developed using WorkBench with login page. I think that after creating the .SCA file we can deploy it using Eclipse under the menu Deploy View Console or using JSPM. After deploying we should be able to login using the credentials and should be redirected based on roles to appropriate pages.
I had deployed the intial .SCA file named (XMII08_0-20004625.SCA) using JSPM. MII version used is 12.1.8 and Netweaver version is NW CE 7.1 EHP1 SP5.
How we can set up the development environment in Eclipse or NetWeaver Developer Studio for MII project development so that we can directly create MII SCA file from the tool itself. Please share documents if any.

I need to modify the default login page in MII and redirect it to different URLs based on roles.
I am able to change the images in the default Menu.jsp in the NetWeaver login to Authentication page and inside properties tab. There I am able to change the images like branding-image.jpg, SAP NetWeaver image, SAP Image. But this is reflected in both the URLs
http://servername:50000/nwa and http://servername:50000/XMII/Menu.jsp
Then I changed the web.xml inside war file (tcsecumelogonui.war) which is in the path InstanceDirectory:\usr\sap\CE1\J00\j2ee\cluster\apps\sap.com\com.sap.security.core.logon\servlet_jsp\logon_ui_resources with the new Login.jsp file instead of Menu.jsp for the servlet tags but still when I access the new Login.jsp page from the URL http://servername:50000/XMII/Login.jsp it is still showing Menu.jsp. But when I tried to login using the Menu.jsp page then it is redirected to my new Login.jsp page.
Please let me know how I will be able to change and deploy a new login page in MII 12.1.8 and with NetWeaver CE 7.1 EHP1 SP5.

Unable to create change order for Operational attributes

Currently we are in 11.5.10 E9 patchset.
Product : Advanced Product Catalog
Unable to find create change order button for any of the operational attributes page.
Steps to reproduce :
1.Switch to 'Development Manager' resp
2.Navigate to 'Item Catalog' > 'Item simple search'
3. Enter criteria to find an engineering item
4. Navigate to the item details page.
5. Select 'Inventory' or 'Manufacturing' or any other page.
Could not find the create change order button.
The profile option 'ENG: Engineering Item Change Order Access' is enabled to YES.
Also, these operational attribute pages are not listed in Change order screen.
Any pointers on this issue pls.
Thanks in advance.
Kumar.

Dear Friend,
Please check following config,
1. Document pricing procedure assignment to ORDER TYPE ( VOV8 under Transaction flow for field Doc.Pric. Proc is
maintained or not )
2. Customer Pricing procedure assignment ( In Customer Master data under SALES Tab for Field Cust.Pric. proc. is mainatined
or not )
3. Pricing procedure determination (Sales Area + Document pricing procedure + customer pricing procedure)
4. Also chcek the condition is maintained for this combination.
Regards
AJIT K SINGH

Create/Change/Delete for material

Hi Experts.
I have to create an application is which i have to create new material, change existing SAP materials & delete sap existing materials.
I am not sure which approach is good:-
1. 1 view for create / change / delete
2. saperate view for create change & delete.
If i go with the first case how do to perform it (how to use create view as change & delete view) I created a view for create materials. For change & delete i created a search view which gives a list of SAP existing materials based on selection criteria. Now how to pass selected materials data to the create view so that i can see it in edit mode (in Create view) if user presses change. or how to display the selected material data in display mode (in create view) for deletion.
If i go with the 2nd option then also how to pass Selected material from the search to change & delete view.
Not sure where do i have to create context methods etc for such functionalities.
Regards,
Nik

hi
Can you tell me how can i display SAP existing materials data if i use only 1 create view
which is used to create materials. At initial its haveing input fields.
Now i want to see data in create view for the seleted material.
do u mean , u have the records in ur data base table and u want ur records to be listed down in a drop down , in ur create view
if so , u can use dropdown by index ..
if u wish to use drop down by index , thn proceed like this :
1 declare a context node of cardinality 0..n
2 declare attribute of type string under it . The attribute name should be exactly the same as that in database table '
eg if u want to poulate values for a field ' SYS' from table , than giv the attribute name as 'SYS' in context attribute
3 declare internal table of type standard table
4 populate internal table with values
5 take the refernce of the node , u have created
6 bind it with the internal table
the dropdown by index wud nw contain app values
Re: dropdown in WDA
cn u pls explain more about ur requirement ?
Edited by: amit saini on Oct 14, 2009 12:29 PM

How do I create an installer for my project that allows for variable data entry like a server unc path?

Hello All,
I have a questions and a few hours of scouring the internet hasn't brought me much closer to an answer.
Here's what I want to do. I have created a visual c# wpf application. I want to have an installer that during install time will have a text box or something where I can enter a server path as a string. Basically my application needs to know where to look
for a server unc path \\server\somesharedfolder that it will be accessing primarily for its work. Secondly, how do I reference said information from within my code.
I have come across application/user scoped settings, which appears to be what I'm looking for. However I can't find a way to have the installer prompt for a value "Server Path:" __________ that I could type into during installation. So far it appears
the only way would be to edit the config.deploy file before running the installer, which isn't a big deal but you'd think there'd be an easy way to take in variables during install.
EDIT: Apparently I can't edit the config.deploy file as I get an error message about the hash not matching.
Thanks for your help!
Lance

Hello,
The forums I found confusing, didn't know the best place to put this question so I put it here.
I have found the answer over at stackoverflow and will detail here for anyone who may stumble across the same problem.
The problem is ClickOnce seemingly doesn't support this feature. Installshield LE either doesn't or does but its incredibly too complicated if all you need is one variable passed to the registry during installation. And it seems the words used for googling
this particular problem will never lead you to the solution.
So here's how to do it (we will be first adding the Visual Studio Installer Add-on to restore original installer project functionality):
1) Inside of visual studio 2013 go to Tools -> Extensions and Updates
2) On the left-hand side click on Online -> Visual Studio Gallery
3) In the upper-right search box search for "Visual Studio Installer"
4) Download the extension labeled "Microsoft Visual Studio Installer Projects"
5) Install, then open a new project under Templates -> Other Project Templates -> Visual Studio Installer -> Setup Project
6) Now for the gold. In the solution explorer there are icons in a bar just below its title bar, highlight till you see "User Interface Setup" and open it.
7) Now you can right click on Start, Progress, End etc any Category heading and hit Add Dialog.
8) From here for my purposes, I used TextBoxes A
9) Once you add it, click on it and observe its properties window. You will see Label, Property, and Value. Make a note of the property name as it will be used to store the data directly into the registry. *Note: there appears to be no way to perform data
validation using the built in textbox dialogs, users can enter whatever they want and move on.
10) Go to the registry editor on the same icon bar under solution explorer.
11) Specify your registry folder, make a new value (I used string) and name it whatever you like. In the value section enter the property label formatted as such [EDITA1] depending on your value.
12) Now when you run the installer for your project, it will take data into that field and place it into the registry provided it has access to that key with the permissions you run the program under.

Report: user/systems status with change details for a project

HI.
I am aware of CN41N/CN43N transaction.
Is there a way to pull a report for a project with system status, user status and the details of who made the changes with date and time???
thanka a lot in advance
Regards
SURYA

Hi
If you have change documents active for status management and project profile then you can get the data from JCDS table directly (changed status and who changed it). Note that you will get the status in SAP internal code and you need to refer TCJ30 table for status.

Create change log for Z tables in XD02/XD03

I have added a new tab, to customer master screen. The new screen under that tab has 4 fields,
those 4 fields are inserted into Z table.
Can you please give me the sequence of steps so that system will show change history with Z fields?
I checked that fields are set for change document.
I have created change document using SCDO.
How to use method GET_FIELDNAME_FOR_CHANGEDOC of CL_IM_V_CUSTOMER_ADD_D_CS class and method GET_CHANGEDOC_FOR_OWN_TABLES of CL_IM_V_CUSTOMER_ADD_DATA class?

Hi,
I have a similar problem with MK02 (vendor master).
I tried with appending a user field to LFA1.
I hand over the table and fieldname (LFA1-Z....) in parameter E_FIELDNAME of method VENDOR_ADD_DATA_CS.GET_FIELDNAME_FOR_CHANGEDOC .
With method GET_CHANGEDOC_FOR_OWN_TABLES of BAdI VENDOR_ADD_DATA I provide the objectclass 'KRED' to the standard program.
However, there is no change document created for changes on the appended field. If I change one of the standard fields the change document is created.
Do I have to put my own coding for change document creation somewhere in the BADI methods?
Any idea?
Thanks,
Holger
Edited by: Holger Probst on Apr 28, 2010 1:30 PM

Create source list for blocked vendor

Hi all,
A client wants to create a source list for a material with a vendor that is blocked for purchase. (XK05, 'purchasing block' checked)
Is this something that can be done in configuration?
Thank you.

Dear Eagle,
When Blocked for Purchasing, system wont allow to create Source List also below error message is throwing,i tried practically.
Not possible to generate any source list records
    Message no. 06717
Diagnosis
    The system was not able to determine any procurement information (i.e.
    purchasing info records or outline purchase agreements) for the
    material(s).
System Response
    No source list records have been generated.
Procedure
    If procurement information does exist for the material, check the
    selection criteria you entered (e.g. material or plant number).
I know system wont allow to create source list also but you saying system allow,thats the reason i tried practically.
we canot do any funtions realted of procuring i mean combination of Purchasing organization.
may be your dout is this only
Prem

How to create dropdown list for custom remote function module

HI ,
       I created a custom remote function module for a ztable.table having four fields.But now the requirement is to maintain the dropdown list for input parameter .
For eg: I maintain Input parameter as action.For that Action we have to maintain a dropdown list(display,insert,update and delete values ) in function module.Is it possible.

Hi
Try using POPUP_GET_VALUES function module in the begining of the Function module this gives a POP to provide a value to you
In this you can provide a value
Check the import parameters of this Function module if it has COMBOBOX as parameter ( I dont have SAP access at this point of time) you can pass X to it so you get List box for the following fields
Create a domain to field and assing fixed values to it and use it in any table(As this works with only existing tables)
refresh fields.
DATA: fields LIKE SVAL OCCURS 0.
fields-tabname = 'MAKT'.
FILEDS-FIELDNAME = 'MAKTX'.
APPEND FIELDS.
CALL FUNCTION 'POPUP_GET_VALUES' " Try copying this in a Test program and execute
        EXPORTING
          POPUP_TITLE = 'Enter Mail Id here'
          START_COLUMN = '5'
          START_ROW    = '5'
        IMPORTING
          RETURNCODE   = SRETURN
        TABLES
          FIELDS       = FIELDS.
Cheerz
Ramchander Rao.K
Edited by: Rob Burbank on Nov 23, 2011 9:50 AM

Create change lists for HDCAM project without Cinema Tools?

Similar Messages

Maybe you are looking for