Create cnf-files (sccp) for 7912G phone appears to be wrong

Hi again Cisco techs,
Have added file for 7912G phone. 
Uploaded 7912 sccp firmware for 7912G phone via tftp-server and sh running-config confirms this
However. run create cnf-files shows differently. Same as sh telephony-service tftp-bindings shows 7960 files
Confirmed files via create cnf-files command
System replies with below error
CNF file creation is already On
Updating CNF files
%Error deleting flash:SEPDEFAULT.cnf (No such file or directory)
%Error deleting flash:XMLDefault.cnf.xml (No such file or directory)CNF-FILES: Clock is not set or synchronized,
                retaining old versionStamps
CNF files update complete
cme_router(config-telephony)#
cme_router#
Have attached output of more sepdefault.cnf and xmldefault.cnf.xml and sh telephony-service tftp-bindings for analysis.
I suspect that first file is corrupt and 2nd file needs updating with correct information
Can you confirm this please?
Please advise if you can. 

That did not work, but using CS6 instead of CS5 seemed to do the trick.  Perhaps I tried to use the old version on newer projects, and the program simply pronounce the file as corrupt.
Thanks for the comebacks.

Similar Messages

  • CCME 7.1 - Local directory Parse Error[4] after created cnf-files

    Hi,
    When I have created the cnf files under telephony-services, I've got the following issue :
    -> when I try to check to complete local directory (press the submit button without filing any fields) the IP phone display Parse error [4]:
    Workarround:
    -> after a "no create cnf-files" and "create cnf-files" under telephony-services the problem is solved !
    If that can help you.
    Olivier

    Hi,
    Thanks, but I'm already in 12.4(24)T
    Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4(24)T, RELEASE SOFTWARE (fc1)
    The workaround continue to work for the moment ;)
    thanks
    Olivier

  • My macbook seems to be going crazy. At certain points (and for hours) I get the oh snap page on chrome, safari doesnt work, macbook wont let me create any files or for example upload music to itunes. I restored my mac so im sure its not a malware problem.

    My macbook seems to be going crazy. At certain points (and for hours) I get the oh snap page on chrome, safari doesnt work, macbook wont let me create any files or for example upload music to itunes. I restored my mac so im sure its not a malware problem. The only thing that solves it is switching off and on , but sometimes I have to do that for 6-7 times before its ok or wait for a few hours. Some help please

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • How to create a VPN client for Windows Phone 8.1?

    We have our own VPN client for Windows and Android. I would like to create a VPN client  for Windows phone 8.1. After referring these site I found that there are some third
    party VPN plugins available for WP 8.1.
    I checked OpenVPN but it is also not available for WP 8.1.
    Is there any APIs available for creating a VPN client in WP 8.1 similar to
    VpnService provided by Android SDK ?

    The VPN APIs for WP8.1 are not open at this time.
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
    objects and unknown namespaces.

  • I have four iphones on my icloud account, can i create an icloud account for each phone?

    I have four iphones on my icloud account, can i create an icloud account for each phone?

    Welcome to the Apple Community Joe.
    There is nothing stopping you doing so, but you won't be able to sync anything between them.

  • Error in creating IO file handles for job (number 3152513)

    Hi All -
    I am using Tidal 5.3.1.307. And the Windows agent that is running these jobs is at 3.0.2.05.
    Basically the error in the subject was received when starting a particular job once it was cancelled and a couple of other different jobs a few days before. These jobs have run successfully in the past.
    This particular job was running for 500+ minutes when it should run at an estimated 40 minutes. At that time it would not allow for a re-start of the job, it just stayed in a launched status.
    Trying to figure out what causes this error.
    Error in creating IO file handles for job 3152513
    Note - from that being said we were to see 2 instances of this process running at the same time, we noticed some blocking on the DB side of things.
    Trying to figure out if this is a known tidal issue or a coding issue or both.
    Another side note, after cancelling the 2nd rerun attempt the following error was encountered: Error activating job, Duplicate.
    When we did receive the Error creating IO file, the job did actually restart, but Tidal actually lost hooks into it and the query was still running as an orphan on the db server.
    Thanks All!

    The server to reboot is the agent server.  You can try stopping the agent and then manually deleting the file.  That may work.  When the agent is running the agent process may keep the file locked, so rebooting may not be sufficient.
    The numerical folders are found as sub-directories off of the services directory I mentioned.  I think the numbers correspond to the job type, so one number corresponds to standard jobs, another to FTP jobs.  I'd just look in the numbered directories until you find a filename matching the job number.
    The extensions don't really matter since you will want to delete all files that match your job number.  There should only be one or two files that you need to delete and they should all be in the same numbered sub-directory.
    As to the root cause of the problem, I can't really say since it doesn't happen very often.  My recollection is that it is either caused by a job blowing up spectacularly (e.g. a memory leak in the program being launched by Tidal) or someone doing something atypical with the client.

  • Cant create hierarchy FILE load for 0GL_ACCOUNT

    Hi guys i have a special Question......we are trying to create a file load hierarchy source for 0GL_ACCOUNT, in BC i cant find any FILE type infosource or datasource.....in source systems FILE i cant create a datasource for hierarchy and in the hierarchy infosource appears a message that the infosource is already mapped to DEVFILE because theres an infosource FILE type for load master data...
    I cant create a file load hierarchy infoosurce for 0GL_ACCOUNT
    Regards

    Are you using the flexible or direct update?  This will only work with Direct Update since you can only load a data target/infoprovider using the flexible update and a hierarchy is never an infoprovider.
    For example, if you make your characteristic and infoprovider.  The Attrib and Text infoproviders show up under the infoprovider tab.  However, the Hierarchies don't.
    So, here is a step-by-step solution you can follow ...
    1.) Under Infosources tab, find your characteristic.  You need to find the infosource for direct update.  It will have the three icons ... one for attributes, texts and hierarchies.  If you don't see the green hierarchy icon, then you need to turn hierarchies on for the characteristic.
    2.) Right click on the infosource and choose, "Assign Datasource". 
    3.) Under Source System, choose your flat file source system, it is probably named FLATFILE, FILE, TEXT, etc....
    4.) Enter your transport info and select yes to the infosource/datasource assignments for attributes, texts and hierarchies (assuming you have all three icons)
    5.) Select the drop down for datasource and choose your hierarchy datasource.
    6.) Activate the datasource or switch the transfer method to IDOC (instead of PSA) and save the infosource (no activation under IDOCs).
    7.) You can now create your info package against the hierarchy datasource.
    If you are having trouble getting to this stage, the next is going to be more difficult -or- perhaps you are already at this and are having trouble loading the hierarchy?
    Whatever the case, please tell us the steps you have gone through and the errors or error messages you are receiving.  Sometimes these issues are very complicated to both explain and to understand.
    Brian

  • How can I create a file uploader for my website

    I am looking for a solution for creating a file uploader interface for my website. I need to accept files on a users local machine and upload them to designated directory on my server. Can I do this with JSP? Any advice or help would be appreciated
    Thanks
    Stephen Rogouski

    See for example Upload taglib from Coldtags suite:
    http://www.servletsuite.com/jsp.htm

  • How to create Same file names for source and target.

    hi
    Can any body send Procedure for below requirement.
    how to create the dynamic file names for a source and save the file with same name in the Target, because it has to identify that which sender had sent the file and the target file should be again sent back to the customer as a link.
    Please help me.
    Thanks

    Hi,
    See the below link
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - sender file name as receiver file name
    Regards
    Chilla

  • How to create a file object for a file on Remote Server? UNIX

    Hi all,
    I am working on two servers A and B. BOTH ARE UNIX MACHINES. My java class exist on server A and executes on same server. The file that I need to process resides on server B. (Lets call it test.txt in MYTEST directory. So path will be /MYTEST/test.txt on server B) I need to do few things before I can process it:
    1) Check if file exist
    2) If it does FTP it to Server A. (I already know how to.)
    For both of these tasks, I need a File object for that file.
    My problem is that I am unable to set it up.
    \\B\MYTEST\test.txt will not work on UNIX. I already tried that. (It only works on Windows)
    I tried:
    /B/MYTEST/test.txt ---- Does not work
    B:/MYTEST/test.txt ---- Does not work
    :B/MYTEST/test.txt ---- Does not work
    B:MYTEST/test.txt ---- Does not work
    All of these instances say the same thing: "File does not exist."
    Any ideas? Please help!!!
    -Chirag

    I by no means want to sound belittling... so don't take me that way..
    You need to understand the basics of files, and networks. You can't check if a file exists on another machine if you don't have a network protocol to communicate with. The reason \\ works under windows is because you are using an invisible (to you) network protocol. You probably know it as windows sharing. If your file were not shared under it's own name, that method wouldn't work (I'm assuming your entire drive is shared without a password... a horrible security flaw...but one thing at a time)
    You can use FTP protocol to check if a file exists. You can either send the raw text FTP commands through a socket connection in java, or you can use a freely available FTP java API to make it a bit more simple. You could also write a small java server on the other machine, and have it tell you what you need to know with a socket connection. In this way, you have created your very own network protocol.

  • Problem in Creating Source Files (Templates) for Original Application Files

    Dear Friends,
    I am trying to ccreate "Source Files (Templates) for Original Application Files" . I checked the link
    http://wiki.sdn.sap.com/wiki/display/PLM/Templates-Document+Management
    I created a new DOc. type TMP with no statuses, checked in KPO, assigned no. ranges.
    Created  DIR & assigned the template file, checked into storage category. DIR no. 10000000390 created.
    In Workstation application "DOX" in define templates for originals : doc. type: ZGA, application: DOX; language- EN; no - 01; In source doc- entered doc. type- TMP, doc. no.- 10000000390, part & version
    Assigned for required source file copy" ZGA doc. type. -- Default Appl. as "DOX" workstation application.
    Now created a DIR with ZGA doc. type, when clicking on originals , DOX prompted and clicking on "create with template" . TMP doc. 10000000390 template open in a new window. I edited & saved. close the MS word window. When comes to DIR, it prompted, Original was changed Do you want to save the original?.
    clicked on yes.
    Saved the ZGA DIR. When I saw the new ZGA DIR created it didn't capture. Where I went wrong ?
    Regards,
    Sai Krishna

    Dear Ravindra,
    By going this below link, it seems we can use template for creating ne wdocument & attach the same.
    http://wiki.sdn.sap.com/wiki/display/PLM/Templates-Document+Management
    Following messages if you read, it may be clear.
    By having templates in place we can utilize the pre-defined documents instead creating right from scratch.
    Entries can be done in the Template and save the document.
    Templates are used for standardization and uniformity. By using templates time consumption for creation of documents will reduce as most of the details are maintained in the master template and the same can be utilize by using the template when creating documents.
    If in DMS editing functionality is not there what is the use of templates- documentation?
    Regards,
    Sai Krishna

  • How do you create a separate iCloud for each phone in the family?

    We have 3 people in our family with iPhones, plus 1 iPad2.  How can we give each of us a separate apple ID so that we can each have our own iCloud storage?  The 55 GB is not enough for all of us.  Deleting the accounts to create new ones is not an option because one of our phones is not backed up on iCloud AT ALL (could never back it up because the 55 is not enough for the 3 of us).

    For each phone, go to http://appleid.apple.com and create a new Apple ID.
    On the phone, sign out in Settings>iCloud by clicking the 'Delete account' button. You are going to have to do this or you cannot proceed.
    Sign in with the new Apple ID. Create a new @icloud.com address. In the Settings>iCloud page, purchase such extra storage as you need. Do a new backup.
    Leave the phone which hasn't been backed up until you've done this with the others. Delete their backups from the original account. Back this phone up to the original account. Then follow the procedure above.
    If you want these phones still to have access to the email, calendars, contacts etc. of the original account you can sign into it in Settings>Mail, Contacts & Calendars.

  • How to create common file systems for both development & quality systems

    Hello Team
    Need some calrification & advise
    we are planning to install ECC6 with EHP5 on AIX7.1 with DB2 9.7 version on single physical server ( NO Virutal IP'S) for both development(SID : D10 & System number 20) & quality(SID : Q10 & System number 20) systems.And it will be running in single LPAR for development & quality systems.
    please advise me how can we create the below common file systems for both development & quality to avoid file permission & installation issues.
    /sapmnt/<SID>
    /usr/sap/
    /usr/sap/trans/
    /db2/IBM
    Thanks in advance & Regards
    BM

    Thanks you Juan for your response
    We are planning for seperate DB instance only.
    what could be the owner(UID) & group(GID) for the below file systems
    /sapmnt/
    usr/sap/
    usr/sap/trans
    Thanks in advance
    BM

  • Open/create/replace file.vi for Excel

    I have a macro enabled Excel file (.xlsm) that I would like to pr0grammaticaly open and then run the macro.  Shouldn't I be able to use the "open/create/replace file.vi" to open the file?

    I believe the Report Generation Toolkit has a subpalette for Macros but I don't know what you can do with it.  The Report Generation toolkit comes with some versions of LabVIEW 2014, I think Full and Professional, but was separate before that.  At the end of the day ActiveX will need to be used somehow.
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

  • How to create a flash button, for mobile phones?

    i want to know the way how i can create a flash button for mobile in flash CS4.

    Create a button of type "button",set the destination url property to the place u have kept the file.But ur file should be anywhere in Common_top.If this file is stored as blob u can use messagedownload bean.
    --Mukul                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

Maybe you are looking for